Auto Detailing Wall Mounted Pressure Washer Setup

[@HawaiiDetailing]

Here is a comprehensive guide to building your own wall mounted pressure washer kit with every part and piece to the whole setup with a detailed diagram. www.hawaiidetailing.com/wallmountedpressurewasher

[@josephdequarto3429]

What size pex did you use in the wall? 1/2” or 3/4”? Nice setup!!

[@HawaiiDetailing]

@@josephdequarto3429 I went with 3/4 but half would be enough. I wanted my bucket filler to be high volume.

[@josephdequarto3429]

Thanks for the reply. Subscribed!! Like your reviews..

[@HawaiiDetailing]

@@josephdequarto3429 you are welcome. Thanks

[@josephdequarto3429]

Jeremy, quick question, what is height from floor to top of shelf?

[@johnsall6274]

Other than getting the hose connector turned around (watch out for that one), the machine is simple to put together and use kzbin.infoUgkxfQauTxLT0JLSvqkq10rD79TU4k0Vz8zP . And very nice, too. I'm surprised at the power-it's more than we'll ever need, and we've not even used the most powerful setting yet.I've cleaned off a dirty concrete porch to get it ready for sealing, started to clean siding, and I know this pressure washer will be terrific for cleaning tools this fall.The only issue we had is we had turned around the hose connector, and it leaked. Once it was on correctly, though, we had no problems with the connection. Just remember that the end with the green knob goes towards the hose. It's obvious now what we did wrong, but not necessarily obvious at the time.

[@HawaiiDetailing]

Yes.

[@ObsessedGarage]

Heck yeah brother! Looks clean.

[@HawaiiDetailing]

Thanks a lot. Means a lot coming from you. Your garage builds are top notch and set the standard for sure.

[@HawaiiDetailing]

@Paul Paul hahaha. Yeah when I say set the standard I mean that if you build a garage and it turns out half as good as some of the builds he has done you are doing pretty good.

[@HawaiiDetailing]

@Paul Paul appreciating a compliment and being a groupie are miles apart. I have been building and remodeling for 30 years. Owned a pressure washer my whole life. I do my own thing. Nice is nice. Does not matter who says or builds it. If you had a history of building good garages and shared it with me I would say the same thing to you. Thanks for taking the time to comment.

[@PastryChefRL]

Great installation, what is the brand of those wall mounted shelves with detailing products on top of the rolling cart?

[@HawaiiDetailing]

Here they are. www.amazon.com/shop/hawaiitesladetailing/list/3QNHS3YBPEVIR

[@jayroc1502]

You are the most laid back guy on KZbin

[@HawaiiDetailing]

Thanks

[@Mannyfresh_]

sick! I painted mines blue to match my little detail cart.

[@HawaiiDetailing]

Awesome. Good to hear. Thanks for watching

[@waynebeck7801]

I like that the input hose is on the side instead of the back.

[@joevanseeters2873]

That is a perfect looking pressure washer set up! Absolutely love the install. Looks incredible. That is EXACTLY how I would want my pressure washer set up. Thanks for sharing your information. I am going to use your idea here as a template for my own garage pressure washer set up. Absolutely LOVE the gray paint too. Perfect match. Actually Karcher makes gray units for their commercial line of pressure washers which is what I thought this one was initially.

[@HawaiiDetailing]

Thanks a lot. Glad you like it. This is a great little pressure washer for the money. The 1000psi pressure output after the nozzle change is ideal for washing cars. If you have any questions about it at all feel free to ask. I will help you however I can.

[@annagraham6204]

Frickin awesome set up. Clean and simple. Gray is on point too. Well done 👍

[@usi9fl]

Thank you for your prompt response on the shelfing. I enjoy you channel and watch you often.

[@HawaiiDetailing]

Your welcome. Thanks again.

[@usi9fl]

@@HawaiiDetailing I have placed an order, they do not have the one gallon system available at this time. They do not have a production date. Many thanks

[@AccentAlarms]

Great video, I appreciate that you took the time to paint K1000 Battleship Gray. What a great touch! As a Navy guy who doesn't choose "Battleship" grey or "Haze" grey. Take care and keep the videos coming!

[@HawaiiDetailing]

Thanks a lot. I appreciate it.

[@Celiafa2000]

Nice setup. The color change looks so much better.

[@HawaiiDetailing]

Thanks and I agree.

[@sovereignskitzo]

@@HawaiiDetailing How did you get the face plate off, feels like there are clips holding it in place by the handle .

[@HawaiiDetailing]

Sovereign Skitzo. There are screws holding it together.

[@sovereignskitzo]

@@HawaiiDetailing I have all the screws out , Is it just hard to get it off?

[@HawaiiDetailing]

Sovereign Skitzo after I removed all of the screws it came apart easy. There must be a few screws still left holding it all together. When I get to my garage I can look closer and help you out.

[@DustyMulhearn]

Well done. Nice set up. I like the grey better

[@HawaiiDetailing]

Thanks. I am happy with it. Would be good to help keep that awesome car of yours shiny.

[@ayodangit]

@@HawaiiDetailing Hows the paint holding up? Did you primer it?

[@HawaiiDetailing]

DANG it’s holding up great.

[@2bParagon]

I just ordered the K1700 cube, I will be painting mine as well. Good job.

[@HawaiiDetailing]

Thanks. It’s a good little machine. I use mine daily. I find with this setup that it’s less hassle to use my pressure washer than my regular hose.

[@jcmort19]

@@HawaiiDetailing I have one as well. How did you pop off the cover? Is there a technique so I don’t break it trying to remove?

[@HawaiiDetailing]

@@jcmort19 it should pop off after you remove all the screws without pulling too hard. Just make sure you find all the screws that are holding it on.

[@matthewhutchison7123]

I hadn't thought of painting the plastics on equipment until I saw this. Thank you! Love the grey. I am thinking about taking the plunge on the same machine. Maybe I'll paint it navy blue.

[@HawaiiDetailing]

Its a cool kit for sure. I loved mine. I recently upgraded the pressure washer to a commercial version but the karcher worked really well for a long time. Was still working well when I replaced it. Thanks for watching

[@matthewhutchison7123]

@@HawaiiDetailing The almighty Kranzel!! Haha.. I will wait until I have a bigger garage to take that step. Keep up the great work, love the channel!

[@DavidMosby]

Great videos.. I subscribed. Of all things, the Harbor Freight pressure washer is cheap at $80 and it has lasted longer than any, several years now. The trick is, keep the trigger pulled, don't on and off much. You speak so clearly I watch at 1.75 speed. THANKS!!!

[@HawaiiDetailing]

Thanks for watching. I appreciate it

[@hosrow]

Great looks great. I really like your channel. You are a cool guy and you describe things simply and nicely.

[@HawaiiDetailing]

Thanks a lot.

[@KiranPatel-fk1pg]

Awesome video was just searching for setups and this new video pops up. Personally I’m looking at a similar setup but can run water through the wall, do you think I should have an extra hose reel next to my pressure washer for my hose already connected to my pressure washer and then just reel I out the other end to my hose outside my garage?

[@Celiafa2000]

Are you talking about trying to use the hose that originally came with the pressure washer on a reel? Are you asking if you should change it to an upgraded pressure washer hose specifically for a reel?

[@HawaiiDetailing]

Thanks for the comment. Please tell me more about your current setup. Do you have a water hose connection in the garage near the pressure washer? Do you plan on upgrading the pressure washer hose or want to use the one that came with the machine? Let me know and I can help recommend a solution for you.

[@KiranPatel-fk1pg]

@@HawaiiDetailing So I currently have karcher K1700 cube. However I'm renting so can't add a faucet into my garage. My current faucet is outside my garage at the front of my house about 15metres away. I was wondering if you think I should mount a hose reel (for my actual hose, not hose for my pressure washer to spray gun) on the wall next to me pressure washer have it connected and then just drag the other end out to my faucet. Or just have a hose reel mounted at my faucet and drag the hose to my pressure washer. Sorry if this is confusing😂

[@HawaiiDetailing]

@@KiranPatel-fk1pg I would say to have the reel at the faucet and drag the hose to the pressure washer unless there is a reason that you want it in the garage for aesthetics or to keep tucked away. This will also enable you to use the hose for other needs as well.

[@pjfan173]

Definitely the Grey and you put together a very nice system.

[@HawaiiDetailing]

Thanks a lot. I appreciate it. Thanks for watching

[@ryeguy88]

I just bought the Karcher cube. Already upgrading my hosing to the kobrajet but it's good to know it's holding up with all the upgrades and is being used regularly!

[@HawaiiDetailing]

Yeah. It’s been a great little machine. I really enjoy using my rig. I planned to upgrade at some point but it’s been working so well that I don’t see a need right now. Thanks for watching

[@Kiki099]

I bought the 75ft hose thinking the k1700 cube would have pressure issues but wow if you say the 100 works just fine I might upgrade in the future.

[@HawaiiDetailing]

Chris Marcial the 100’ works great and I don’t notice any pressure drop at all. With the 100’er I can also reach everywhere I need to on my property. The reel holds it nicely too.

[@saulgarcia7347]

Best setup I’ve ever seen!! Can’t wait to have mine like this!

[@HawaiiDetailing]

I like mine for sure. You will be happy with yours for sure. Let me know if you have any questions when you do the install.

[@patricks5575]

Great setup super easy to tear down when needed, that pressure washer rose reel is pro!!!

[@HawaiiDetailing]

Thanks and thanks for watching

[@chrishall1135]

What attachment did you use to connect the jumper hose to the front of the pressure washer

[@HawaiiDetailing]

Chris Hall M22 (14mm) female to 3/8 stainless steel plug. And a 3/8 stainless steel disconnect. Bought those pieces from Obsessed Garage.

[@chrishall1135]

Thanks so much I’m building the same set up in my shop

[@HawaiiDetailing]

Chris Hall I really like mine. It Is an easy to use setup. I find myself using the pressure washer way more now that it requires no effort to setup or put away.

[@notthelord4208]

What a setup!! Looking to upgrade my hose so I don’t have to keep moving my pressure washer around and unkinking it just wondering what hose you have here??

[@HawaiiDetailing]

Thanks a lot. There are links to all the parts I used for the whole setup. Check them out so you can see the exact one. Thanks for watching.

[@dtna]

Nice clean setup! I use MTM stainless steel quick connects.

[@HawaiiDetailing]

Good stuff!

[@bp5713]

Great video…. I really like how you tucked the reel under the shelf. Do you have the height of the shelf and cox reel? I’d like to set mine up the same way. Thank you in advance

[@thegoodgodlife7563]

Just finished mine (with the exception of the hook ups). I added a Rubbermaid track shelving system also. May as well be completely convenient.

[@HawaiiDetailing]

Great to hear. I am sure you will enjoy the unit. Please share your experience with it after you get some time on it. Thanks for watching.

[@MatthewHurtado]

Great set up, things are really coming along in there.

[@HawaiiDetailing]

Thanks. We need to get your garage set up soon.

[@MatthewHurtado]

Hawaii Tesla & Detailing yes we do, I have some ideas that I’m excited for.

[@HawaiiDetailing]

@@MatthewHurtado Great. Next time I am in town I can help you.

[@MatthewHurtado]

Hawaii Tesla & Detailing sounds good thanks

[@paull2212]

Thank you! You posted 2 Cox reel options in the description. Which do you use or recommend (brass or stainless) for a regular consumer?

[@HawaiiDetailing]

If you want the looks go with the stainless. It wasn’t available when I built mine. You can get colors of choice in the reel too. If you want blue with the brass than that’s what I have and it great too. Thanks for watching

[@paull2212]

@@HawaiiDetailing sorry to ask one more question. The look of brass vs stainless doesn’t matter to me. I just want the unit to last. Will the brass last a long time and is it worth paying up for stainless? Or is this an area of the project to save some money. Thank you

[@HawaiiDetailing]

@@paull2212 the brass will last as long as you own the reel. It’s more a look thing. These reels last a very long time. The are commercial grade.

[@mikesimek6448]

Looks great, maybe would have done some of that blue in the handle and the COX reel on the cover of the pressure washer

[@HawaiiDetailing]

Yeah I have it on this one. Thanks. kzbin.info/www/bejne/iWiWfJmOiNyHlZY

[@mikesimek6448]

@@HawaiiDetailing looks awesome! I am prepping spots for three setups at my house like this, ( detached garage for boats abs yard equipment, pool lanai at the rear of the house, and one in the main garage for cars. I’ll most likely do the cheaper unit on the three of them at first and then upgrade if I need to.

[@HawaiiDetailing]

@@mikesimek6448 great plan. I love my setup. Works great. Thanks for watching if you have any questions let me know.

[@kencaideball]

Excellent ideas and great results

[@HawaiiDetailing]

Thanks for watching

[@TheCarDetailingChannel]

That's a clean setup and the grey looks much better. Subscribed!

[@HawaiiDetailing]

Thanks a lot. Appreciated.

[@brettoberry3586]

I like the gray MUCH better. Nice job!

[@HawaiiDetailing]

Thanks a lot. Thanks for watching.

[@frediricwalker1799]

Sorry i speek franch Your grey hose are mtm hydro kobrajet not e OG hose? Thank for your time

[@HawaiiDetailing]

Yes. The hose is MTM cobra jet and the sprayer is OG spec Mosmatic. I put links to everything in the description so you can have a look at the different parts. Thanks for watching.

[@reggieeskridge3850]

Nice setup and clean

[@HawaiiDetailing]

Thanks

[@Lynch84]

Sweeeeetttt. Love the look and setup. Would love to see a Kranzle up there. But looks like that works pretty well. Also maybe add some type of fans or a/c to help with the heat.

[@HawaiiDetailing]

Thanks a lot. I do have plans for a split ac unit soon. Got a few loose ends in the garage to tie up and than will get after the ac. I have future Kranzle plans also.

[@Lynch84]

@@HawaiiDetailing good deal. Really enjoy your channel.

[@nannamoonpiee]

Did you mention the hook up of the lead hose to reel from power washer? How is it connected is it a quick connect? Thanks

[@HawaiiDetailing]

Reel side straight connection and the PW side there is a few fittings. They are all in the description. Look at all of them and if you still have a question let me know.

[@adriangrove9997]

Keep up the good work

[@HawaiiDetailing]

Thanks

[@startingtech3900]

i see the bissell cant wait! and obsessed garage is amazing

[@HawaiiDetailing]

Yeah. Let me know how it goes when you get your machine.

[@jackhuff9560]

Obsessed garage is so full of himself. What person tries to imply that he suffers from OCD while actually being diagnosed with something else?

[@startingtech3900]

Jack Huff would say he has a healthy ocd for detailing why u hating on obsessed? Is it bc he is successful?

[@jackhuff9560]

Starting Tech lol. Unlike you I don’t celebrate hypocrites who pretend to be something they are not. Obviously you have no problem with him acting like he suffers from ocd. Funny how all his sheep are blind to his bs. Copy’s and steals other people’s methods and acts like it has always been a part of his “process”.

[@startingtech3900]

@@jackhuff9560 everyone kind of takes things from here and there, i learned all my detailing process from people on youtube and now it has become my process. did he ever say he has ocd or just kind of joking about it bc he is so detailed. what way do you think obsessed garage fans are sheep? why are you so mad at him?

[@FujiboHeavy]

This setup looks GREAT!!!! Hoping to do this setup as well!

[@HawaiiDetailing]

Thank you.

[@victorgarcia1749]

Can I get hose reel somewhere else and model or item number?? And how do you secure karcher on shelve???

[@HawaiiDetailing]

I added another link in the description to get it from Amazon. I am using the 3/8 with 100' of hose. My Karcher just sits on the shelf and does not move at all. No Attachments. Hope that helps.

[@joekegg]

Gray Karcher. Nice setup.

[@HawaiiDetailing]

Thanks a lot. I really enjoy using it. Thanks for watching.

[@anthonygallo]

Great Channel! Super informative. To remove that ugly cover to paint, I see the bottom screws, does the top portion just snap out or are there other screws I'm missing?

[@HawaiiDetailing]

I can’t remember exactly because it been a while. Sorry.

[@hawkie333]

Very nice! I dig the grey. I got turned onto a really nice Mosmatic clone from Dallas Paint Correction. It’s like half the price, and really stout.

[@HawaiiDetailing]

STEVE I would like to see the clone. Can you share a link?

[@hawkie333]

Hawaii Tesla & Detailing this is his video. kzbin.info/www/bejne/hpval4ehiJKHqNk The gun can also be purchased on Amazon here: AR Annovi Reverberi MV925 Rear Entry High Pressure Guns Psi 4500, 925, Black www.amazon.com/dp/B07999PQ6K/ref=cm_sw_r_cp_tai_gGOyFbHEAYBRQ

[@carlmoore4518]

I did not go through all the comments, so may have missed it...but could you provide the product info for the shelves above your bench that are holding the bottles of cleaning products. Thanks.

[@HawaiiDetailing]

Yes I can a.co/7jFjrWQ Thanks

[@Me-ce7ep]

Did you remove the back of the pressure washer that holds the accessories?

[@HawaiiDetailing]

No I put the rolled up cord in there. Thanks for watching.

[@TKTampa]

Great videos, how does it do with snow foaming? From a specs standpoint the gpm seems little light?

[@HawaiiDetailing]

Check out my snow foam battles videos. The first bunch of them were all on the Karcher. Thanks for watching

[@TKTampa]

@Hawaii Tesla & Detailing awesome thank you for the reply! 🙏👍 I will definitely check the out.

[@JMc.D]

It’s a nice clean setup

[@HawaiiDetailing]

Thanks.

[@chrisweir4488]

So this video inspired me to do this same setup. However mine wants to vibrate of the shelf. How did you keep it from doing that

[@HawaiiDetailing]

Use a rubber drawer liner cut to size so that you can’t see it. Mine stayed still but another one I did needed it. Solved it right away. Thanks for watching

[@chrisweir4488]

@@HawaiiDetailing thanks! Good videos my man

[@lmSteveo]

With the two hose bibs that you have. I see you’re using pex pipe. I’m guessing you’re using a shark bite hose bib? How did you know how much to cut off for it to sit flush with the drywall and do you only have 1 screw in the stud holding them up?

[@HawaiiDetailing]

I did a dry fit before cutting the pipe. You can stud out an area around the bib to get 2 screws into wood. That’s what I would do.

[@waburger8591]

Cool video man!

[@thomasprentice7409]

What type of fittings are you using to connect the hose to the reel? Thanks

[@HawaiiDetailing]

The hose screws straight to the reel.

[@JD-kp8lo]

this is awesome. any issues with vibration when using the washer?

[@HawaiiDetailing]

A little vibration but nothing crazy. Thanks for watching

[@tsyriac]

Nice set up . Gray 4 sure. Where did you get your stainless tray for pressure washer and shelves for product .

[@HawaiiDetailing]

Here are the links to those product collections. Thanks for watching. www.amazon.com/shop/hawaiitesladetailing?listId=3QNHS3YBPEVIR&ref=idea_share_inf www.amazon.com/shop/hawaiitesladetailing?listId=R0YSIMO15N74&ref=idea_share_inf

[@therascals8237]

nice setup, and the grey looks really good. Have you bolted the Karcher down somehow? When it is running does it rattle on the stand or feel like it might fall off? Also it looks like the Karcher turns itself off when you don't have the trigger engaged? thanks!

[@HawaiiDetailing]

Thanks. I do not have it bolted down and it does not move around. I think bolted down it may vibrate the wall without some rubber between the machine and the shelf. For now it’s working great as is. The Cube does turn off after the trigger is released. All in all I am extremely happy especially at this price point. I highly recommend upgrading the hose and sprayer if you choose to get one. If you have any other questions let me know. You can see it in action in my latest 2 detailing vids.

[@ayodangit]

@@HawaiiDetailing Is there holes on it for you to mount? and also did you just remove the soap dispenser? it looks better without it.

[@HawaiiDetailing]

DANG there are no mounting holes and yes I did just remove the dispenser. Thank you

[@andrewmarshall7420]

Love it!! Quick question, I live in Atlanta where the water is considered soft (though not as soft as Hawaii). Would you recommend adding the wall mounted filters (like what OG sells)? Or is that just over complicating the set up? Thanks so much!

[@HawaiiDetailing]

If you want spot free water its a must to have a proper DI setup. With it you can let the water dry on the paint. Spotting is not a concern and it makes for less of a rush. Without it it will leave spotting if not dried with a blower or towel.

[@BobPluss]

Love this!! Curious why you didn’t go with an auto retracting house reel? I’m building out my system using your links, but this is the one change/upgrade I’d like to make. Is it possible?

[@HawaiiDetailing]

Thanks. The reason I use this reel is it’s a commercial grade last forever reel. It’s as easy as it can be to reel it in. A retractable reel is always a bit of a pain especially at 100’. I don’t see a problem with it and it could turn out cool. Let me know what you go with and share the results. Thanks for watching.

[@001ianj]

I love your set-up. So clean and easy to follow. Great for a home setup for personal use.

[@HawaiiDetailing]

Thanks a lot. After I got it all set up and organized it makes using it fun. Thanks for watching

[@klumsytone]

What are the dimensions of the Karcher K1700 Cube pressure washer? Thanks.

[@HawaiiDetailing]

Aprox 14x12x12. Thanks for watching.

[@davidgreen3350]

NEW SUBSCRIBER 😃 Brilliant set-up may I say, agree on on your colour code also, the false wall has given me a project now, thanks for a great video.

[@HawaiiDetailing]

Thanks a lot. I appreciate it.

[@jeffeversole291]

Super nice! is the Cube secured to the shelf or just sitting there?

[@HawaiiDetailing]

Just sits there. Some people have to use a rubber drawer liner cut to size to keep it still. Mine just sat there.

[@CTTH100]

Would having a hose reel mounted above the pressure washer cause issues having to push water upwards? I have a small cabinet overhead and don't want to put the reel close to the floor. Thanks!

[@HawaiiDetailing]

I can’t imagine that it would be a problem as it pushes water wherever the hose is ran from the reel as it is. It should be fine. Thanks for watching

[@MrSuperman258401]

Would have looked good in blue too, like your hose reel

[@HawaiiDetailing]

Thanks for watching

[@FarmerTan89]

What hose is that on the Cox ?

[@HawaiiDetailing]

It’s an MTM. There is a link for it in the description so you can have a look at it. Thanks for watching.

[@stebesplace]

I have a similar setup, but do you find any vibration on the shelf causing the cube to slide around? I thought about some sort of tie down but wanted the unit portable when needed.

[@HawaiiDetailing]

It moves a very small amount after using it for a while. I have the high pressure hose from the reel to the Karcher zip tied under the shelf so that prevents most of the movement. You should try a rubberized mat cut to size. I did a recent install of this same system and we used a rubber mat cut to the size of the machine and it looks and works great. How much movement are you getting?

[@stebesplace]

@@HawaiiDetailing On my setup (not as custom) I have it on a shelf with an active garden hose coming up off the ground QD'd in, and the outlet going to a direct hose. Of course, I'm not bouncing around with the pressure hose, mindful of that, but there's some play in the machine (inch or so over time), so I thought about some zip ties, but that's clunky. Will give the rubber mat a try and I'm sure that'll solve the issue! What size shelf did you go with? 14x24?

[@HawaiiDetailing]

The shelf is 12x24.

[@usi9fl]

Nice setup, very helpful information.

[@HawaiiDetailing]

Thanks

[@willdamian1066]

New subscriber here 🙋🏽‍♂️ love the setup super clean!

[@HawaiiDetailing]

Thanks a lot. Glad you like it

[@4snday]

That looks like a wicked set up. I’m doing my garage now, and wondering if you’re able to give me measurements on heights for your shelf and tap for the pressure washer and distances? I’ve got not drywall up yet and only framework, yet I need to order the cube from the states as here in Australia, we don’t have it and I don’t want to guess locations of this before I sheet the walls.

[@HawaiiDetailing]

I have a video coming out really soon with all my thoughts on layout of a PW system. Do a dry fit on the ground first to get these measurements. The short answer is mount the reel at a comfortable height for you to use. That is the most important piece. Next put the shelf above it at a distance that leaves room to use the reel but not soo much of a gap that it will look bad. I like it to be just s few inches apart. Next layout the electric and plumbing to meet the needs of your equipment. I suggest using a general location that will work well with any future ungraded equipment (future proof). Hope that helps.

[@4snday]

@@HawaiiDetailing I can’t wait. My walls are half ready, but I will wait for your video to use a reference. I don’t have a cox reel like yours though. I’ve actually got a retractable hose reel for my pressure washer hose and that will sit up high, towards the ceiling out of the way. Like your air hoses have been installed. I will just have my pressure washer on a shelf like yours and water outlet to the side of the machine.

[@georgeransaw5822]

That looks great, really good video. I may have to go with the 1700 on the cart since I may not be able to connect my water in the garage for now. Would I be able to at a later time get rid of the cart and turn that system into a cube so that I can mount it on the wall ??

[@HawaiiDetailing]

That I don’t know. I would make sure that it is able to be taken apart to an acceptable level before you buy it. Thanks for watching.

[@britonjohnny]

Hi. What type of water hose did you use to connect the pressure washer outward line to the reel?

[@HawaiiDetailing]

I put links in the description for the whole set up. Thanks for watching

[@Steveisme21]

Love the video! This is exactly what I am looking to do in my garage. I just bought the Karcher Cube and now I am trying to map out a plan to run a new water line off my outside hose bib just outside my house through the wall and into my garage. I have been looking at the Sharkbite products (piping, connections, and spigots.) The Sharkbite spigot you use says online in some of the reviews that it only has a 1/2 inlet inside even though its a 3/4 outside. Does this affect the Karcher pressure washer you are using since its reduced down to only 1/2 of water flow at the spigot?

[@HawaiiDetailing]

No not at all. Even a commercial electric PW only uses 2 gallons per minute and the 1/2” will deliver way more than that. It will work for sure. You can always go for 3/4 if you want. Hope that helps. Thanks for watching

[@mleukus]

dumb question - how does one remove that cover and the soap dispenser ?? Thanks

[@HawaiiDetailing]

Its been a while since i did that video but there was screws and it snapped off with a small amount of effort. You have to look around and find the attachment points. Thanks for watching

[@millll111lllI]

Does that 2' Jumper Hose replace the pressure washer's outlet? Or is there an adapter to go from the outlet into the jumper hose?

[@HawaiiDetailing]

There is an M22 to 3/8 plug adapter.

[@jasonhenderson4376]

Wondering how you painted the Karcher? How did you remove the cover. I removed the soap dispenser, then removed 6 screws but it still didn’t come loose?

[@HawaiiDetailing]

After you find the screws it snaps off. Be careful not to break it while piping it off. Sorry I don’t have more it’s been a while since I did that paint job.

[@brianb.2857]

I like the gray. Nice set up.

[@HawaiiDetailing]

Me too. Thanks! I appreciate it.

[@benkneisley3001]

Really great setup! I’d call it way better than OG spec! The only thing I would do different is drill through the shelf, set in a rubber grommet, and run the outlet hose from the machine through the hole to the reel. Soooo nitpicky, but hey you asked.🤣😁

[@HawaiiDetailing]

Thanks a lot. I appreciate it and thanks for watching.

[@Mtzblades]

Hey new subscriber and was wondering was the face plate of the pressure washer easy to come off

[@HawaiiDetailing]

It was a little tricky to find the clips but overall really easy.

[@Mtzblades]

@@HawaiiDetailing thank you so much do you know if the clips were at edge or middle

[@EvelynGonzalez-dt6qg]

I like the gray

[@HawaiiDetailing]

Yes me too. Thanks

[@daviddolezal1921]

Thanks for sharing this content with us. Do you have a link for the Obsessed Garage gun?

[@HawaiiDetailing]

Your welcome

[@fillflashdetailer8838]

How did you mount the hose reel? Did you use toggle bolts against the drywall?

[@HawaiiDetailing]

No I put structural supports in the wall and used lag bolts. It’s too heavy to mount to the drywall. You can see it at 2:07 in the video.

[@fillflashdetailer8838]

@@HawaiiDetailing So, you opened up the wall and added blocking between the studs?

[@HawaiiDetailing]

@@fillflashdetailer8838 yes

[@MarkSmith-oy9jh]

how did you get your jumper hose behind your stainless steel bracket for your shelf? I don't see any cut outs on the brackets, did you drill a hole? Great setup!

[@HawaiiDetailing]

I just did a S routing with the hose and secured it to one of the shelf mounting bolts. There is an update to that vid on my channel with another look at the system. A new jumper hose. Thanks for watching.

[@MarkSmith-oy9jh]

@@HawaiiDetailing Love that upgrade of the jumper hose, much cleaner. Are you able to link where you bought yet? Thanks.

[@MrBuffaluffagus]

I wonder how many gray Karcher Cubes you're responsible for, lol. There's at least one more as of today. Very nice job!

[@HawaiiDetailing]

Thanks a lot. That yellow is a deal breaker for most garages.

[@benkneisley3001]

SPOILER ALERT: 2022 introducing the new Karcher gray series 🤪🤪🤪

[@NORTHOFTHEWALL-b5x]

Wish I could get the pressure washer in the UK.

[@HawaiiDetailing]

It’s not available over there?

[@NORTHOFTHEWALL-b5x]

@@HawaiiDetailing nope. Only from the US. Been searching for quite some time. Sucks!

[@omarcastillo3801]

Does this pressure washer release the pressure on it's own or do you have to keep turning it off an on?

[@HawaiiDetailing]

It has a pressure switch built in.

[@houseofpang]

Hi! Any updates to the setup, any water leaks?

[@HawaiiDetailing]

kzbin.info/www/bejne/iorapJ6ji5umfdU Thanks for watching

[@mpop259]

This looks clean man!

[@HawaiiDetailing]

Thanks a lot. I appreciate it.

[@mykey06]

How do you remove the plastic to paint? I also notice that you didn’t put the soap container back. Is that ok? Thanks! Great content!

[@HawaiiDetailing]

Thanks take out the screws that hold the the front panel on and unsnap it and paint. Removing the soap container is fine. I zip tied the hose to seal it off from the pump. Thanks for watching

[@mykey06]

@@HawaiiDetailing which screws are they? Thanks!

[@HawaiiDetailing]

@@mykey06 they are in the back holding the faceplate on. Look around good. There are only a few back there. I remember taking all the ones off that looked like they would hold the faceplate on. I ended up finding a few not so easy to see screws that were holding it on. There is really no risk to unscrewing all of them that might be holding it on. It kinda has to be pulled a little to unclip even after the screws are out. Sorry it been a while since I took it apart. If you are still having trouble let me know and I will take a closer look at mine and help you figure it out. Hope that helps.

[@mykey06]

@@HawaiiDetailing thanks for the help and guidance! I appreciate it.

[@jetrick105]

Cox make a grey hose reel.

[@HawaiiDetailing]

I don't think they do. I would have preferred that color myself.

[@jetrick105]

@@HawaiiDetailing Obsessed Garage has 3 colors, Grey is one of them. Cox Reel.

[@HawaiiDetailing]

Rick Misita that’s good to know. They have a lot of cool stuff.

[@jackhuff9560]

Rick Misita not worth overpaying for something just for a different color. Both reels function the exact same way.

[@HawaiiDetailing]

Jack Huff I agree. That’s why I did my own thing.

[@thomasabarca5960]

How did you remove the soap/detergent dispenser, did you pull the hose out or just cut it?

[@HawaiiDetailing]

I pulled the hose out and zip tied it in a fold.

[@Shepestrieseverything]

Hello, excellent video, I just bought this pressure washer, and I want to do a similar setup but without the hose barrel, my question is, what quick connect do you recommend to make the connection of the pressure washer to the hose m22-14 3/8 or m22-15 3/8? thanks for your time and your excellent channel

[@HawaiiDetailing]

Thanks for watching. m22-14 3/8 is the size. There is a link in the description if you want to make sure you get the correct fitting.

[@producemover]

Enjoy your vids man. Nice garage! Thanks. .... quick connect. Quick connect. Not disconnect LOL hear it all the time on many vids and some reason just sounds wrong.

[@HawaiiDetailing]

Thanks for watching. Hahaha. Yeah.

[@manuelangulo3992]

What’s the Brand on the pressure washer hose.

[@HawaiiDetailing]

I put links to everything in the description for you to check out. Thanks for watching

[@kevinbiggs63]

Hi what it called black hose between Karcher to reel and where you get it? Thank you

[@HawaiiDetailing]

Links to everything you will need is in the description. here is the hose you asked for there is a 2' and a 3' version. 3' Jumper Hose 3/8” bit.ly/38wP8ok 2' Jumper Hose 3/8 amzn.to/3r3UGgd Thanks for watching.

[@jasona4881]

What did you do to keep the pressure washer from vibrating off the shelf?

[@HawaiiDetailing]

Mine stayed still. Others have used a rubber drawer liner cut to size.

[@andrewmarshall7420]

Hey! Love the video! Quick question, what advice would you have if I need a hose that’s 125-150ft? Do they make good hoses that long? Would pressure be maintained over the distance? I’m planning my set up and 100ft is just a tad too short for where I want it to go. Thanks! And keep ‘em coming!

[@HawaiiDetailing]

I would make an extension kit to add on when you need it. Hope this helps Hose bit.ly/3raoi0T Male Plug bit.ly/466X8Hd Female bit.ly/3E4ESlQ

[@Guzman_j]

Nice setup

[@HawaiiDetailing]

Jose Guzman Thanks a lot.

[@vectorr6651]

I know this is older but did you ever have issues with the braided appliance water line with smaller diameter inner?

[@HawaiiDetailing]

No. It can move way more then the GPM of the machine.

[@vectorr6651]

@@HawaiiDetailing thanks man. Oh I need to find it in 3ft. Have an awesome day!

[@tsyriac]

Hi good morning , I have the setup on the wall but how do I attach my Uber flex 50 feet hose to the cox reel . Specifically I need it to put it into the cox reels so I can reel the hose on the cox . I need the fitting to attach the Uber flex to the cox. Please help . Thanks .

[@HawaiiDetailing]

I don’t use uberflex so not sure exactly the fitting. Sorry.

[@MrStonecold36]

I would love you to install one of these for me great video

[@HawaiiDetailing]

Hahaha. You can do it. I put all the parts together for you in the description. Thanks for watching

[@ryand930]

Just wondering what connections you used to connect hose to cox reel? I just ordered my reel and same hose. Hose has a quick connect and wondering what would be the best to order.

[@HawaiiDetailing]

Hose screws directly to the reel.