Walmart 80cc BMX bike build (Part 3)

[@chancewindham1718]

You're incredibly talented dude. It's a blast watching you work.

[@JohnWheels]

Awesome! The support/seat looks great! So does the paint! Maybe put a round flat piece of metal over where the seat post used to go to prevent water from getting in and rusting. You can also get some BMX style handlebars to make it more comfortable to ride. Good video!

[@66mybeat]

Great video! Bike is turning out great! I have never had any good results with clear coat in spray cans! No matter what brand, they just don't seem to ever work!

[@VasilyBuilds]

Thanks brother!! Yea i read somewhere that rattle can clear is way less glossy than the automotive stuff. But know I know

[@povtarev4408]

Man you made that thing look so much better!! Great job man!

[@VasilyBuilds]

Thanks bro!!

[@lomsomesGarage]

Had a great time there got to meet a lot of folks there

[@leoscustombuilds9717]

Nice work overall. I enjoyed watching.

[@damanzakkwylde]

Awesome build. You had me laughing out loud when you said "I cut out these little triangles and I'm going to weld it". I guess having a background in fabrication made me snobishly take terminology for granted. For future reference those "little triangles" are called gussets or gusset plates. Your buggy video brought me here. Keep having fun with these builds and thanks for the inspiration 🤘

[@ericmoody3944]

Damn straight, its awesome seeing young guys doing this kind of stuff.

[@chrisb.5264]

nice build, DEFINITELY TIGHTEN THAT CHAIN!

[@EliFinixie]

YES! You did reinforce the frame! :,) now i love this even more lmao i never could get my 50cc engine to run on a project ab 2 years ago and just gave up lol finally got a 4 stroke clone bike last week. Always dreamnt ab a mini bike like this one on a small bycicle but never thought it would be possible because of frame issues..... but this is great!

[@Chalz108]

That thing is sick! Great job on it. Almost 3k subs

[@VasilyBuilds]

Thank you!!

[@VasilyBuilds]

Yea 3k is right around the corner..

[@backyardhacker7929]

@@VasilyBuilds damn lmao almost 3k nah almost 200k now

[@couriersix776]

@@VasilyBuilds 2 years late 213k subs

[@driveitbreakitfixit7496]

Its looking awesome! Try one of those pull starts on it and see how it does

[@JohnWheels]

Good idea

[@GoKartsorGoneFishin]

🤜👍ejector seat?...that vtec jus kicked in yo...lol...great video man...bike looks awesome...editing keeps getting better..close to 3k..keep it up!

[@VasilyBuilds]

HAha thanks for tuning in!!! I wish it would always run like that (under vtec). Might have to mess around with jets. keeps bogging

[@GoKartsorGoneFishin]

Baldy's would know why she is boggin..he will prob comment..i saw my comment in the video too...👍..thx man!

[@VasilyBuilds]

Haha he knows everything. No problem

[@jonsmith2217]

Vasily Custom Builds if you can go to a steel mill company you can get a 20 or 25 ft piece for a 5 or 10 ft piece. for the same price roughly and they have every kind of metal imaginable. Tell them you'll put them on a KZbin video after they give you the price and you might be able to get a bigger discount or get some for free. Tell them you're a young man new into metal fabrication and customization and how many years you been in it. I found a steel mill down the road for me that would sell to the public because a bunch of steel mills closed where I use to buy from. And the steel mill was so much cheaper then Home Depot, Lowe's, Tractor Supply or Rual King. Wholesale prices are so much cheaper than high retail. Also if you can show us how the bike pedals if you still keep the petals on it without the engine on. I think im going to ad a 49cc on a 21 speed bike mountain bike that is. And use propane on it it's easier and last longer especially a big bottle. And I have lots of 20 lb barbecue propane tanks. But I have seen smaller propane tanks for assume littler engines or something. But the average 20 lb BBQ tank holds 4.2 gallons of fuel. Also if you really want to make more power you can use possibly a Sneaky Pete nitrous kit but talk to NOS on what jet size to use. Because I'm use to dealing with bigger Automotive engines with nitrous. But I'm sure some company knows Small Engine nitrous they pretty much do it all. And don't forget to wear your full face helmet chest protector and racing gear ideally.

[@VasilyBuilds]

We found a place in Athens, Tn that sells outside steel for 0.30$ a pound. and aluminum for 1.25$. Been my go to place since. It is far away however

[@fishstick617]

You did a really good job on this man

[@SrColon309]

Wonderful job!!!

[@leoscustombuilds9717]

Nice work, looks like fun!

[@prancstaman]

Cool bike, motor looks good. Yah, painted on a rainy day and the paint absorbed the water some. If that happens again let it dry completely and the fogginess is only on the surface to where you can probably wipe it off, most of the time it works. Saves the trouble of redoing it.But black is the worst where it has a blueish tint to it when it absorbs water.

[@VasilyBuilds]

Thank you brother!! thanks for sharing your knowledge with me!

[@prancstaman]

Your welcome. I think knowledge should be free to give, glad to give it. You should take a look at my channel, You probably would like my projects and plenty of know how to learn. :)

[@danhard8440]

at 7:30 you need to convert that Uhaul truck into a RV lol

[@peytonthomas4506]

Very cool

[@saved_yet_so_as_by_fire]

If the humidity is too high the clear coat won't come out glossy, because condensation distorts the surface.

[@jakeford3359]

those neighbors are pissed off ;D

[@billsfanmc1786]

this deserves a bigger engine

[@bryduhbikeguy]

Still going back through posts.Awesome Vasily !59k now.

[@VasilyBuilds]

😊 I'll be back soon..

[@whiting444]

Your paint came out dull or flat the first time because of the moisture in the air, its whats called blooming. You need to paint in a warmer enviroment, somewhere inside your garage with a heater on.

[@saved_yet_so_as_by_fire]

Oh, I see you bet me to the punch.

[@ostaz007]

I respect your talent!! Sub'd !!

[@danhard8440]

your the next gen Mustie1 lol

[@nathanray2348]

Very cool build bro I've been wanting to do one.of these for a long time

[@Baldys_projects]

Don't fear baldys here! your engine won't break in proper at 22:1 run 32:1 4oz per gallon and jet down a couple sizes so it can break in for a tank , then run 40:1 3.2oz per gallon and it should need a even smaller jet at 40:1 , let me know in your next video.

[@VasilyBuilds]

😂 Yeah never got around to mess with the Jets and will run a lesser oil ratio. My batch of cylinders is very poor. The nikasil sleeving is wearing very fast.

[@jonsmith2217]

I normally put oil on coffee filters and cover oil on connecting rods with the coffee filters covered in oil around the connecting rod so they don't rust. And I put the connecting rod, oiled coffee filters in Ziploc bags back in the connecting rods box. So the rods will be ready when I build an engine. Well I thought I would use WD-40 in place of oil a year or two later I look at the rods bad choice they had rust spots thank goodness the rust wasn't on the rod journals or I would have had to resize the rods. Your motor should be alright it will get oiled up after you start it up. But if you see the rust later upon teardown I wouldn't use WD-40. I would use transmission fluid or any kind of oil. Also they usually have loaner tool torque wrenches at O'Reilly's and AutoZone and some of the parts stores but there not a quality torque wrench. And some mobile tool trucks like Snap-on have a torque wrench Checker to check the accuracy of the torque on your torque wrench. And it's free to use like on the snap on truck. Luckily I haven't had to rebuild any small engines just big engines and you always use a quality torque wrench. But I have seen some guys don't even use a torque wrench on Little Motors just clamp it. But I would do like you mentioned earlier blue Loctite all the bolts. I don't use blue lock tight on the head bolts or connecting rod bolts or main bolts. but all the other ones I do blue Loctite oil pan, intake, timing cover, exhaust, flywheel Bolts Etc. On big car engines they're not too quick and easy to pull out if needed and it's nothing worse than having to do the job a second time. Also if you want more power to without using nitrous I've used it before nitromethane in my little 110 stock 3-wheeler you just mix it with a fuel but don't let it sit are you will have to dilute it down in order to get it started. Run all the fuel out with a nitromethane when you use it. There's also other fuel additives if you talk to a fuel company or Google it that used to be poly propylene oxide they're all heavier oxygen waited fuels. And in automotive engines you would turn the time and back and run colder plugs just like nitrous supercharger or turbo engines. But on Little Engines you could make sure with a heat gun on a four-stroke for instance check the temperature on the cylinder head and the exhaust pipe with normal gasoline and then mixing fuel. Basically you would want to make sure the cylinder head and the exhaust gas temperatures are not getting too hot or it could fry the little motor. Actually some go-kart racing guys told me there's a cylinder head temperature for Little Engines. Because when I went over to propane and I can put propane on any of my little four-stroke gasoline engines I had to make sure I didn't run it too lean. But they say with propane it's unheard of running too lean. They may even make a electric supercharger for small engines but the downside you have to have 12 volts. I know they do for a 4-cylinder car engine to add a little more power. As I mentioned earlier I want a 21 speed mountain bike with a small 49cc engine just to pull me down the road when I get tired of peddling or in a case of shtf. And I would like to put propane on the 49cc 4-stroke engine so it could run for days on a standard BBQ tank on the back or front of the bike. On a flat rack strapped down with something covering it. But I want my bike to be quiet so they don't ban me from the road because we all know the law does whatever they want. And before long it will be over here in America. electric bikes or motorized bikes will probably have to be plated and taxed like overseas is now. And then before long they'll want insurance on it next. That's why I want it really quiet and no engine or propane tank hopefully showing. And if I drive pretty slow they'll never know it's motorized. Or they might not bother me hopefully. Especially when I take it on trails.

[@carlosgarza6898]

You did great dude! I'm in the same trying to start my project!

[@harrisonp3727]

Good job!

[@VasilyBuilds]

Harrison P Thanks man!!

[@davidjohnson6588]

Cool

[@gregsteele9002]

need to lean out the mixture on your main jet needle cuz it's "4 stroking" on you. if you unscrew the top of the carb, pull the slide out & move the c-clip up one notch

[@VasilyBuilds]

Yes check part 4

[@rndm-r1dr905]

yupp gotta watch those brakes, totalled mine into a car because they went out, awesome build though

[@johnnykjaersgaard7978]

Very cool build. 👍🏻 It actually gave me some ideas to the vintage moped I’m restoring. If you were to use a rattle can clear coat it has to be a 2K rattle can that can mix clear coat with hardner (the can has two compartments) And btw - Safety first, please wear a helmet when riding ☺️👍🏻🏍

[@VasilyBuilds]

Thanks! Do you have any idea we're to get the 2k clear stuff from? Is there a store that sells it? I don't want to order it online

[@johnnykjaersgaard7978]

Vasily Custom Builds - well, I’m from Denmark, Europe so I really would not know 😊. But google can help you 😄

[@andrew753951]

Hey I noticed that when you were welding on the neck that you were welding with your nozzle is about 1/4-1/2inch to far away from the arc if you use argon gas if not then idk but That could be why your welds aren't as good as they could be...

[@VasilyBuilds]

I hold it far away when the gap is too big. so i can fill it up and not burn through. That may be why.

[@damanzakkwylde]

@vasily builds Andrew is correct. If your welder is gasless it is not as much of a concern. If you are having problems burning through your material then try turning down your power and or increasing the feed speed of the wire

[@OldCarAlley]

You painted on a rainy day, the hight humidity will cause the paint to blush.... or dry kinda foggy looking.

[@VasilyBuilds]

Old Car Alley Yea it was 100-80% humidity this past few days. It looked foggy. After repaint It took 2 days too dry but looked decent in the end

[@JohnWheels]

I painted my first go Kart in Pennsylvania winter weather. The paint cracked and clumped up and looked horrible. I had to repaint whenever I got warmer.

[@justinc8638]

Really nice on the rack

[@durangojohn714]

I have those same bar grips with the eagles lol

[@wakeywakey4289]

I wouldve like to seen you run a mono shock under the back

[@VasilyBuilds]

Yea it would be nice.. I'm buying a dirt bike soon tho..

[@boxer951]

The paint turned out bad because rustoleum paint sucks! I tried a few cans and they suck. Use any other brand rattle cans and you will get better results. Or better yet,get it painted at a bodyshop. Also you should do Goped GSR46 scooter build..they are fast.they can run 50mph stock with just the right gearing. Great vids btw and i did sub and liked your video's as well.keep it up.

[@jjhack3r]

Good job man. Ya need to drop the main jet size a bit. All that 4 stroking is from running rich. I just did a bike build myself and had to use a #75 after performance mods. A #80 jet is a little too rich for my build. Before raising and widening all the ports, a #65 was perfect.

[@VasilyBuilds]

Maybe I should go up. Because I have really widened my ports. I put a 65 in and it was even worse

[@jjhack3r]

Vasily Custom Builds I'm not using the stock carb btw. Im using the motorized bike "racing" carburetor with a flat slide and no needle. Without jetting, that carb still makes the bike rev cleaner than a nt carb.

[@jjhack3r]

I just did a top speed run and I hit 51 mph on my gps with a 38 tooth sprocket and 26 inch rim. I should be able to hit 60+ mph if I put my 28 tooth sprocket on it but its not worth the loss of torque. Someday I want to make my own bmx motorized bike and set it up with suspension and modle it after a trials bike. A 56 tooth sprocket paired with a 20 inch rim should yield low enough speed for tricks. I probably wont even put an expansion chamber on it so it will be smaller, more durable and have more controllable power delivery.

[@VasilyBuilds]

That is somewhat what I have in mind whit my 20incher. Tune it build it for top speed and the streets. Then when the time comes I will add a swingarm and back to the factory sprocket

[@sartjunanbtimes8663]

you should put a spring in there 4:32

[@bwxmoto]

I got that same tach for my CT200U.. haven't installed it yet.

[@GomezAddamz]

Part 2 isn't on the playlist?

[@barris1233]

*Y A L L*

[@Jayden_Wayne9308]

I don’t see part 2 on the channel is it somewhere else maybe

[@VasilyBuilds]

I took it off, I thought it was not good

[@austinreynolds5702]

Bad ass

[@its_just_me7057]

What is the engine off of?

[@jaidengarcia4485]

Nice video but you should tighten the chain it’s very loose don’t want you getting chain wipped with it

[@VasilyBuilds]

Will do. I have to like 4 links out

[@jakeford3359]

13:05 did the whole motor just moved?! ;D

[@mylesg1103]

U need some 200 psi tires

[@notthatdigusted7468]

Looks hard to build but fun to ride. I'm building a motorized BMX bike but it will be a lot simpler than yours.

[@notthatdigusted7468]

I just have to buy an arc welder again because my other one was stolen from me. Yeah fun huh.

[@jamesdoes576]

What tooth sprocket you running?

[@VasilyBuilds]

Bro James Builds 32

[@jamesdoes576]

Vasily Custom Builds thanks but I am not sure why your bike is faster I have kind of the same setup but it might be because of ny muffler you can check out my build on ny yt channel

[@dsmooth2449]

hey im having a prob. I change out my piston and head. now I'm having prob starting the bike. I've notice air is blowing out the intake instead of taking it in. please help

[@noahselea6289]

did you install the cylinder the right way?

[@joniquispe6968]

Muy bueno estaría para Aser una bisimoto estilo cro con un solo amortiguador

[@frankierutherford1888]

Do still have this old girl ? I’m just checking out your old archives buddy. I’m thinking about building my son something.

[@37Blitz]

Are you related to goonzquad

[@37Blitz]

You did awesome job

[@motomatt4266]

13:09 ik im a little late to the party, but how can vtec kick in without any valves or a camshaft?!?!

[@VasilyBuilds]

It's a Meme

[@motomatt4266]

@@VasilyBuilds sarcasm is difficult to convey over text lol

[@ItzM3yaBoi]

Don't paint in the rain or high humidity for high gloss finish:]

[@dwesson44]

definitely make it quieter so as not to grab the wrong attention

[@motoguy1587]

I would have made the front forks black

[@user-tb2ml1sz1n]

4 years later but you definitely skipped part 2...

[@brandon2076]

I have that same shirt

[@VasilyBuilds]

I wore three shirts and a tank top in this vid which one you taking bout haha

[@brandon2076]

@@VasilyBuilds the american eagle, white with red sleeves! Lost it awhile back actually, i think. How old are you by the way? I do alot of 2 stroke stuff, vintage mopeds. Currently rebuilding a few.

[@VasilyBuilds]

brandon2076 Got you. Yea I think I've had that shirt since 15. Now I'm 17. Love how cool and easy 2 strokes are. I'm hoping to buy a yz 125 in a month or so..

[@brandon2076]

@@VasilyBuilds WOW! I wish i was doing what i was doing at your age. I was relatively crafty/handy, but i didnt have a workspace and was not permitted to buy or use power tools until i was roughly 17 or 18, now im 22. Not that my mother likes me having assorted grinders, a big ass bandsaw, and a welder...shhhhhhh. check out my channel, i gave a few dumb videos up, but nothing really special. Except my videos with Jimmy Diresta, those are special. ;)

[@VasilyBuilds]

Definetly will check you out. Yea i have to agree I am pretty privileged. My father comes from the Soviet Union were work ethic is above all!! He used to be a construction worker, so he has everything (except a shop, a plasma cutter, and a tig welder) Which I will hopefully all buy by myself in the upcoming years

[@CopperHeadProjects]

What happened to part 2!!!

[@wowyo1186]

how much for the bike 🤔

[@VasilyBuilds]

I took it apart

[@truckstotractorsrepair]

Take a link or two out of that chain

[@JohnWheels]

Yes, do that. The top and bottom of the chain are basically touching each other.

[@jjhack3r]

Half links are the best way to get a tight chain without a tensioner

[@burntrubberballs]

65 jet needed

[@Doughnutmansvideos]

Your engine is on super loose so is ur exhaust

[@jacquespoirier9071]

be extremely prudent with high speed wobbeling, the frame you use is rather flimsy and very prone to that

[@andrejmalik5596]

Wtf how expensive tubes

[@Loli1-1]

you have no valves though

[@pizzamanyoutubewatcherofal3947]

I would not mine doing my Mongoose like this it's a bigger bike though

[@mrbenjaminvincent]

Who was that chick screeching at last night lol

[@VasilyBuilds]

What time mark? Might of been mom

[@franksmith7271]

You didn't apply the clear coat correctly, it's easy to do... I know...

[@jhoncabrera8248]

Hasla tipo motocross

[@VasilyBuilds]

¡Quiero hacer eso! Offroad o bicicleta de calle

[@jhoncabrera8248]

Vasily Custom Builds sii estaría muy bien qué le pusieras una suspensión atras

[@barretnorcross9508]

YOU PUT ALL THE Paint On TOO FAST,!! !!! So it's a little DULL...

[@opiestanborough4774]

dude slap a cr80 in that beech and grip it, rite into the neighbours house.... buckle up that chin strap...

[@derekthompson6653]

The bike is way to small for your engine bro.... Way to small...... It looks like a little kids bike lol....

[@carmenbrown300]

thats a mtb not a bmx

[@ondravaculik4254]

this sound is not good very very 4 stroking engine not good setting carburetor :-)

[@notthatdigusted7468]

No offense but I feel like this bike looks like a weird looking deformed mosquito.

[@VasilyBuilds]

Your profile picture looks like a deformed mosquito

[@notthatdigusted7468]

@@VasilyBuilds Your MAMA. :)

[@notthatdigusted7468]

Or any other flying insect.