Walther Lever-Action C02 **FULL REVIEW** by RACKNLOAD

[@ericappiah5235]

The rifle arrived today and I dialed in the scope just a couple hours ago kzbin.infoUgkxQt2uORDRfFOVSrO4idv4B90ThT6EOnEL . I haven’t shot with a scope in probably 25 years. The X on the left was my target. (the shot almost in the bullseye on the right X was my father in laws first shot after I made adjustments) The two shots circled are my first 2 shots. Then I brought it down - shot once. Then brought it over to the left. From there zeroed it in to dead center. This all was from 25 yards out. Follow instructions carefully when mounting the scope. So far I'm very happy with the purchase.

[@MrZola1234]

The rotary cartridge gives up a little realism to another similar gun that you can feed cartridges through the loading gate, but I suspect most guys who plink a good bit with one would end up preferring the convenience of the rotary cartridge.

[@Vercingetorix45]

Also because this one shoots pellets out of a rifled barrel, the ones with the cartridges shoots BBs out of a smooth barrel

[@sicks6six]

just bought a 2019 version, two 12g adaptor and easier to open stock ,177, and its very well built, like a Swiss watch, OK its wasn't cheap, but you get what you pay for, well weighted and balanced, solid, no rattles,

[@batmanofsweden5920]

Could you link to this? I mean where you can buy it. 🙏🏻🙏🏻🙏🏻

[@simonnoble7589]

It's about £540 for the wells fargo gold finish . June 2022 .... price's going up all the time

[@markusk4959]

You should use H&N Excite flatheats instead of the mosquitos and your rifle will perform like hell. I shoot much better groups on 35 yards with the excites. It's only the pellets, the rifle is very accurate!

[@simonnoble7589]

Rats 🐀 watch out

[@fast03vette4me]

wish it was .22 cal shooting 750 FPS

[@combatgerbil3262]

The hammer and trigger are both metal, the only plastic parts are the front and rear sights, barrel ends and the barrel bands. Front sight blade is windage adjustable, (remove sight hood) rear is elevation adjustable.

[@jimjordam]

Yeah, I have this rifle and had no probs sighting it in, poor old rack just needs a bit more time with it and test the parts for metal or plastic, he gets it wrong at times bless him. I get 400+ shots with a 88g can so it's quite a bit more than Racks 200 shot estimate. Also the Walther 2X12g adapter works a treat with this rifle so you don't have to use the expensive 88g ones but the adapter cost me £50 so isn't cheap but you only have to buy it once. @Racknload, nice vid dude, love this rifle.

[@combatgerbil3262]

Likewise I bought the 2x12g adapter, found one for £35, more than paid for itself. Cracking rifles and make for some good speed shooting too..

[@daverobinson22]

I bought this rifle and the sights are perfect at 25 yards. I bought it to hone my skills before moving on to something more powerful and with a scope. It's great quality regardless of what this guy claims - recommended !

[@kendalabarca6707]

Exquisita revisión. Excelente arma de CO2 . Excelente canal. Felicitaciones!!!

[@marksierra3522]

I think the cool factor makes it worth the $400+ price tag, but still - it's not going to be in my hands any time soon.

[@airwolf269]

Great review. $459 For a C02 rifle is crazy overpriced. Hell i only paid $319 for my Real Henry Lever-Action .22LR you can also get a Henry 17 HMR for $479. Sorry cant see spending that much for a co2 rifle. The shell ejecting Co2 is only $199 you get 12 rounds and its as close to real as you can get. Think someone was hitting the pipe when the put the MSRP of $459. LOL.

[@martynf65uk]

The front sight on the end of the barrel is slid left and right to adjust the grouping not the one you pointed to. You kinda suggested the screw was undone to adjust sights, not correct, thats the elevation adjustment via a wedge. 450 shots from the 88g (£8 is the lowest I've seen) for real! or about 80 max from the 2x12g adapter. I love this gun! so much fun blasting a tin can down the range. Its build is superb, feels like the real thing and so much fun! There is a speed loader available in Germany too about £20 that can reload 6x 8 shot mags in very little time.

[@fish2574]

the true question - can you do the terminator shotgun spin with it ?

[@martynf65uk]

yes :-)

[@mikeenglish7063]

If you want to spin it. They do a variant called the duke. Named after John Wayne. Were he does that in a film called true grit. It's got a shorter barrel.and larger cocking lever. Makes it much easier to spin it

[@MrChris-bx7ss]

Wish they had an air tank inside the forearm hand grip. CO2 gets expensive.

[@marc_d.357Mag]

Here in Germany they are a bit cheaper. I had to send mine back because it shot all over the place, the new one shoots good groups. But both guns are “shooting left” like yours. I think that is because the front sight is mounted off center. I have to adjust the front sight all the way to the left. Apart from the junk sights, the gun is great.

[@ball6169]

A

[@michaelstalenberg2407]

How many rounds before its drop power. Thay say 430 per co2 is that correkt?

[@billbonnington7916]

it's the front sight you need to adjust for windage - 25 yards probably at the extreme edge of range for this...

[@Strutingeagle]

Thats a cracken liughl pellet plinker there.

[@RBoh]

Any good for birds you think?

[@Eryeahmaybe]

That is a beautiful looking air rifle

[@Brandon_Mishima]

Damn this costs pretty much the same as a real .22 lever action lol

[@cadwarrior]

yes, but you can shoot this one in your garage anytime 😁

[@debrarufini6906]

Looking forward to mine arriving. I so love this model. X

[@Steven-hb3cm]

200 shots??? no ! 300 good and maybe 400 with 88g

[@cadwarrior]

easy 460-480 with 88g

[@Ernest-q2v]

How can I get one of them

[@mughram]

you have best underlever airgun made in UK ... called Phoenix MK2 PCP looks beautiful too but quite expensive

[@Fubar684]

$500 U,S,,,,Bloody Hell.

[@germanshepherd13]

Agree . Can by a real gun for that price

[@1810jeff]

Fubar684 with that price you can buy a Henry golden boy

[@dergartenlaborant6083]

in Germany it only costs 270eu Around 250 Dollars

[@jeremys8360]

I bought a marlin 336 for $380 out the door...

[@ljloonie4416]

$500 us Hm in Philippines money?

[@Jimdigby]

Every other youtube video on this one praised and demonstrated its accuracy. Really confusing.

[@lexblack8306]

Thats an amazing looking air rifle ❣❣❣

[@TheBuniek]

$429.99 holy cow, thats lots of money, easily can buy quality pcp plus hand pump

[@christopherbrown8381]

How come my capsule leaks out when I’m tightening them to the seals ???

[@maksimmaksim-mj9ur]

Igračka🤣🤣

[@biggunrider5232]

Do you have a video of replacing the o-ring?

[@sajidafzaal1307]

Sir I want to buy this one .. so how it possible i m from india

[@mattedge8782]

How much do I want to be Arthur Morgan 😂

[@elliottjames55]

how many shots before it gets weak?

[@BRUTEGAMESMINECRAFT]

I have this exact air rifle at home aha

[@tommyohlund5243]

Underbart Gevär! Fem Stjörnor från Mig!!

[@seawinds12]

How much are they now in 2020

[@khafidarifianto3271]

How much cosr sir..

[@leomasterson1988]

what’s the FPS?

[@armaanhafiz]

Is this a pcp and do you need a FAC to own this

[@racknload]

It's C02 as the title says. You don't need a license for it...

[@MrZola1234]

This type of gun isn’t intended to be shot laying down and or a bench. This is a gun you shoot standing or on 1 knee

[@racknload]

Better for filming though buddy....

[@MrZola1234]

@@racknload not really, it looked goofy

[@MrZola1234]

@William Tell attacking my word choice doesn’t make my statement any less accurate.

[@Dadolphinsmakemecry]

Rather have the legends version half the cost and ejectable cartridges like the real thing BBs yes but 10 shots and if you own the Colt SAA peacemaker like me then they are compatible with the Umarex legends lever action

[@Mjk10957]

Sights are adjustable m8

[@tuebbing84]

It's been hard to find this rifle anywhere, seems to always be out of stock

[@Steven-hb3cm]

www.versandhaus-schneider.de/product_info.php/cPath/40_1678_788_105/products_id/29443

[@joserobertodeoliveira7925]

Eu gostaria de saber o valor e como comprar um desses

[@WoodomainJeremyBroun]

nice review thanks . As you say a good fun gun

[@dogzero1]

Great review. I appreciate your taste.

[@edbouman5013]

Very good review, but you should also give your specs in Imperial and not just Metric form! Many people in the United States and Canada are not totally familiar with Metric!

[@edbouman5013]

@William Tell, Who pissed in your bowl of Cherio's?

[@sniperwolf1484]

Hello. Could you tell me is it rifled barrel..

[@martynf65uk]

Hard to see, but yes, shine a light down the barrel and use a magnifying glass you can see it is rifled

[@roofertilldeath2071]

NOW THEY NEED TO MAKE A PCP VERSION!🤤🤤🤤

[@mughram]

Search for Phoenix MK2 pcp

[@aaronthomas7564]

Can you make a video how to mod it for more joules?

[@qg786]

You could get a better sight 3d printed!

[@rorm12]

Hi Q! Where can I get that?

[@martynf65uk]

There's no point, use the gun for what its good for, sub 30 yard blasting as fast as you can The supplied sights are just fine for what it is. You point it like a shot gun, then adjust aim depending on where you hit the tin can. The real fun is cycling the gun as fast as you can while blasting tin cans down range. SO much fun!

[@dezalan437]

Is it steel or alloy junk?

[@dergartenlaborant6083]

Dez Alan Steel

[@combatgerbil3262]

@@dergartenlaborant6083 alloy receiver and lever, just like on some firearms, steel barrel.

[@bobsradio6025]

I agree that the thing would make a nice wall hanger, but not much more. I have 3 things against it: 1. Price of the gun 2. Price of the CO2 cartridges 3. It has that stupid cross bolt "safety" that Marlin & Winchester put on their lever actions in an act of bending over for the democrats. When you are holding the rifle in the shooting position, you can see if the hammer is in the half cock position, but you cannot see that cross bolt nonsense. That is why all my lever action rifles are made by Henry, except for one very old Marlin 336SC in .219 Zipper that was made when Marlin rifles were quality rifles.

[@madmex6526]

At the 21-minute mark he said this is a quick review. That's funny. Ha. Mine was $500 in the US and A, and I didn't break a sweat. I wipe my rear-end with 500. $10 per 88 gram co2 cartridge is nothing in this game. I ordered 12-extra rotary magazines at $5 each in case I lose some, and who wants to load magazines all the time? Nobody, that's who. Thanks for video.

[@thomasjones5706]

I do like your rundown and I will buy one. However being a British / German citizen I do wish that you English speaking guys would learn the correct pronunciations. Walther for example is a German make. The "W" in German is pronounced as an English "V" sound. "TH" is pronaunsed as a "T" the h is silenced. The "A" is pronounced as one would say "AH" I see. So the makers of the gun is pronounsed in German as "Valter"

[@Beesa10]

I will pronounce it 'valter' from now on.

[@clivemarsh2397]

Very disappointed when i saw this review, i had an original specimen some years ago and i can only think that buyers of this gun have never seen an original. It looks like a bad Chinese imitation with crappy sights, but, each to his own.