Walther maximathor choke drilled (Everything went wrong)

Рет қаралды 2,482

Amazing airguns

2 жыл бұрын

Пікірлер: 37

@joeschmitt8694 2 жыл бұрын

It does it every time but this time.

@ezrabrook3993 2 жыл бұрын

Guud Deal Professor! 👍🏻👍🏻👍🏻

@lankey21 2 жыл бұрын

This guy needs his own talk show. But the gun needs a different scope It's raining It's cold It's a Tank driver 🙄🙄🙄🙄🙄🙄

@ezrabrook3993 2 жыл бұрын

More video's would be gr8t! 👍🏻

@amazingairguns6350 2 жыл бұрын

I agree that scope is a discovery and it works great to look through but the scope Cam on that is terrible I have a vortex that it’s greet on Camera footage I also have a couple do you wanna do basketball with me

@amazingairguns6350 2 жыл бұрын

And a couple HOK scopes that are also great but I got a man guns and I kind of shut up to that gun I’m just gonna have to keep switching to one off myjuben Because it is crystal clear with a scope Cam

@amazingairguns6350 2 жыл бұрын

And really the funny thing is now whenever I go to shoot something as far as an animal outside I’m not picking up any other gun but my P 12 177. As soon as the weather permits I’m gonna shoot that thing at 200 yards. It is just a tech driver. And I can let it sit for a month and I know I can pick the gun up with no rag creep and take the one first shot it’ll be right where it supposed to be.. That is the only gun I have even out of my really expensive guns. That I know can sit for months and it’s going to be right where it supposed to be all the other ones no matter what rags experience a little creep after a month

@amazingairguns6350 2 жыл бұрын

And another good point of that gun 400 slugs cost $18.99 and they’re 21 grains and they go almost 1100 FPS. So I can do a lot of shooting pretty cheap. And 21 grains isn’t that light. So I still have a good weight for hunting. The spring I’m gonna be all set up to do a lot of hunting videos I’ll just sit out on my deck

@pawemadej3929 2 жыл бұрын

Incredible storytelling, nothing to show 🤣

@johnhardy1629 2 жыл бұрын

Been watching your videos for a good bit now and recently bought a kervan kR1.25 but wondering if there is a easy way to make a pellet sizer? In Canada I am looking at having to spend $ 50 or $60 to get one and just nit ready to spend that yet. Thanks and keep up on the videos!

@garystatni510 2 жыл бұрын

I’ve got the same rifle 25 cal. I haven’t use it for few years and now air tank not holding air. I think I have to get new O-rings . Also I’d like to get regulator for this rifle. Can you help me with this? Where can I buy correct O-rings and regulator and how to install them?

@JK-sn6tv 2 жыл бұрын

Some of his overfilled guns exploded?

@airgunnerxf9157 2 жыл бұрын

Hey man uhm just some advice… when ur refinishing ur rifle stock, DO NOT try to redo the checkering. Leave if alone, just clean it up with a toothbrush or some but do not bring a checkering tool on to it. That checkering is not handmade, it’s done by a laser basically. Anyway take my advice and cover the checkering with tape to protect it while refinishing ur stock !!! You’ll be much happier, I speak from experience.

@SteHughes90 2 жыл бұрын

Paintstripper and a toothbrush will clear the lacquer off the chequering very easily.

@waterandair3106 2 жыл бұрын

I would like to see how you do the crown after the drill. It takes me very long with the brass round head screw method. That choke will be very rough after the drilling.

@amazingairguns6350 2 жыл бұрын

i’ll shoot it soon the video I’ve just got so much going on with the kids and my health what I do is to do the crown I tried using a stone but the stone wears out too fast I take the drillbit because it’s at the exact angle that’s needed and I Krazy glue 220 grit onto the end of the bit. And then spin it backwards so it stands the crown. I made a tool to do test in the leg but not everybody at home has a lathe. So I find the easiest way for someone to do this at their house is to take that bit after you drill out your choke glue the 220 on and like I said spin it backwards then take the 220 off and go to 600 and then do the same spin it backwards and your crown is doneYou don’t want to cut a 30° edge on a crown that is the most false thing the best crown would be a totally flat crown. So if you own a gun at the crown is totally flat just take a black with 220 sand it for a while then do it again with 600 and you’re done

@amazingairguns6350 2 жыл бұрын

at first I tried a stone on the Dremel. It took me 20 minutes to shape the stone. So I put it in the end of the barrel and barely touched the crown. And I figured that was good enough so I didn’t even look because I was in a hurry I go outside the things shooting a 6 inch group so I figure you know what I got a hit it a little bit more. I go and look at the stone it actually cut in to the The rifling so I had to drill the barrel a quarter inch more and instead of making the tool I had the idea to take the drillbit that I used to drill it out not only is it the perfect diameter but it’s the perfect angle all you wanna do is clean that adds up so there’s nothing hanging out

@amazingairguns6350 2 жыл бұрын

That is also exactly what I did with my 177 Cal P 12 I got it on a video somewhere up there or I show how I drilled it out. And I figured after I drilled it out if it works good I would cut back to where that crown is and then re-thread the end of the barrel. That gun shot a .413 at 100 yards and I left it just the way it was. So I stumbled on this drawing the choke out by mistake. Because I was in a hurry to see if the edge of the barrel was my issue of why I couldn’t shoot under 1 inch and I ended up with under a half inch so I do know for sure that using that drill bit with that sandpaper definitely does it

@amazingairguns6350 2 жыл бұрын

I am also going to shoot a video on how I got my huma regulator up to 200 bar for my edgun

@waterandair3106 2 жыл бұрын

@@amazingairguns6350 Thanks. I'll give it a go. Nothing to loose. If the rifling is clean at the end and you don't feel a burr when pushing a pellet through, then it is successful. I always spin the barrel slowly while crowning to make sure the crown stays square and swing the drill in a circular motion with the round head brass screw method. Hope it makes sense.