Walther Reign UXT PCP Bullpup, "Full Review" by Airgun Detectives

[@j.verfaillie5742]

I think it's invaluable that you let us know the sweet spot. Very accurate shooting.

[@AirgunDetectives]

I appreciate you watching and thank you for taking the time to leave comments 👍

[@jwhitaker81]

The sweet spot is going to be different for each gun. Not a huge difference most of the time. I'd run a fill over a chronograph for a more accurate assessment. That sweet spot will depend on the weight and shape of the projectile as well, too a degree.

[@DrWho-jy7lo]

I’ve had the Reign for a few months, and by far it’s my favorite rifle. Here in Central Ohio, shooting air guns are prohibited in the city limits, so I joined the local gun club, and use their 25-yard range. The only pellet I use is the Crosman Premier 14.3 grain HP. Charging the gun to 210 bar (about 3,045 psi), I’ve been able to fire 100 rounds. The ending pressure was 25 bar.

[@bluuper321]

Was just looking at one of these. Checked your channel to see if you had a review. You’ve always been spot on. Thank you. I really do value your opinion! Have bought many air guns with a positive Review from you

[@AirgunDetectives]

I appreciate you watching and thank you for the comments 👍

[@heithwatkins]

I love this rifle. Excellent review. 👍🎯

[@rossbertram7997]

Very nice looking gun keep up the good work JC Very good editorial on this gun.

[@AirgunDetectives]

Thanks Ross!!

[@PeterAgostiniJdcap26]

Thanks for the review JC , been eyeing this one .. could you do a video of changing the cocking arm to the other side ? Thanks 😎👍🏻

[@AirgunDetectives]

That's an easy process once you take the case apart. The manual covers it in detail 👍

[@lilladokka]

Great value. Great looks.

[@brorjordas1979]

Hellyeah!! This was another sweet review. I've loved the design of this one ever since I saw the very first picture of it. Way cool in looks imo - and not your everyday PCP rifle. I'd buy one of these for sure if had the cash. I also love that the cocking lever is not at the rear and that it is ambidextrous.. Yea..Those screw recesses ain't that nice to have and look at, but I do not mind it so much that it'd ever be a deal breaker.. The power figures were there and the accuracy was there - so, way okay for me.😁👍🏻 Thank you for the great review JC!!

[@AirgunDetectives]

Hi Bror, this is really a fun rifle and probably my favorite Bullpup as far as shooting. I love the compact feel and it shoulders like no other. Not to mention it works just as well for left handed shooters. I hope all is great at home! 👍

[@georgegandara6054]

Very nice piece of gun, superb review, learning and enjoying every new video, regards

[@AirgunDetectives]

George, I really appreciate you watching and thank you for the comments 👍

[@georgeloveless4176]

I'm a newer sub and I really enjoy your reviews. I haven't heard anything bad about this gun and its definitely on the "want" list. I really need to slow down on buying airguns, but theres so much good stuff out there I just cant help my self! Thanks man for your great work.

[@AirgunDetectives]

Hi George, welcome. Yes, I discovered first hand this is a very addicting hobby. I looked up one day and ran out of storage for all the airguns. I stopped counting a couple of years ago at 300. I continue to sell some of my inventory, it gives me the opportunity to obtain new products to review. Thank you for tuning in 👍

[@nlmeireles5109]

Hi JC, Walther Reign UXT is a Bullpup with a very interesting design. I like it, very compact. But a bit expensive for an unregulated pcp, at least where I live. Excellent review as always, all the best. Cheers

[@AirgunDetectives]

The Reign is in the ballpark of the other non-regulated models, like the Akela and the Bull Boss. I will cover the Bull Boss in the upcoming weeks😉

[@frankcross2297]

Looks really nice. Always wanted to shoot one of these. Quiet, nice long rail, and bolt action in the middle. The accuracy looks great too!

[@AirgunDetectives]

Hi Frank, this is my favorite bullpup to shoot thus far. It is such a comfortable fit. Thanks for tuning in 👍

[@geraldkoth654]

Thanks for the thorough review. An item that you did not show is the dust insert for the fill port. I just got a Reign. You do not have to remove the whole stock to adjust the trigger, just the three rear screws and pop out the butt pad. My velocity higher speed hump is around 1800 psi. About 2000 psi to about 1500. and I got up to 1023 with Crosman Premiere HP using the FX radar chronograph. And yes it hits HARD. The other thing that surprised me was how quiet the gun is with those high velocities.

[@AirgunDetectives]

Gerald, thanks for the additional info. I also changed out the front trigger spring after the review, just to lighten up the trigger a bit more. I really enjoy shooting this rifle, it feels really great in the shoulder. 👍

[@patrickkim7566]

Thank you Sir.

[@AirgunDetectives]

Patrick, thanks for watching 👍

[@OH8STN]

Love your videos! Hoping to see you upgrade to 4k video soon

[@murfspop]

Another awesome review JC . Kinda like a Akela with a plastic stock. I wonder how much quieter it would be with the Buck -Rail moderator on it .Is the barrel threaded for this option? I'd like to see your review of the Air Venturi BullPup.

[@drameday]

I bought mine 2 years ago and have put several tins through it. My only complaint is that it isn’t regulated. The sweet spot you discussed is for sure where the gun really shines, but if it were regulated it could maintain that sweet spot for the entire 60-70 shots per fill. It would of course add to the price, but if I’d had a choice, I’d have paid $75-$100 more for a regulator. I really like the design though, especially the stock covering the ugly bottle, which sets it apart from my other PCPs. I’ve used mine to kill snakes, starlings, pigeons, and one raccoon off my ranch. It’s quiet enough the cattle barely look up from grazing when I shoot.

[@AirgunDetectives]

I found it very enjoyable to shoot. I am a fan of regulated PCP's as well. I am also a fan of the 3000 psi fill. So it's nice to know the 3300 psi fill is not necessary. Thanks for tuning in and I appreciate your comments. Happy Shooting 👍

[@kenfan5666]

Hey JC!!! Thanks again for an excellent video and review. What would you say are your top five picks for .22 PCP hunting, sound suppression, fpe, ergonomics, and overall quality for the same price point? Would you pick a PCP over a Magnum break barrel for hunting? Thanks again. Stay Safe, Be Well, God Bless.

[@glennchaffin8446]

This looks like the left handers dream pup. Is there any other small game/target bullpup air guns out there that I need to consider as a lefty? Thanks for your no fluff, straight forward reviews.

[@we7shewe7she67]

there is an MK2 of this gun which is regulated ... I hope you review it as well.

[@JR-mr5dm]

Sir, great reviews on air guns honestly one of my go to channels to review air guns. I’ve been trying to look for reviews on the Crosman Magfire Extreme .22 but hardly find them. Would you be able to review it?

[@AirgunDetectives]

JR...email me directly and I'll give you some specific 411 on the Mag Fire [e-mail]

[@stefanseelmann3595]

Great review! I just got this Walther last fall after researching all of the others. I put a Sig red dot on it. I haven't been able to use it yet. This is my first PCP. Could you suggest a compressor that wouldn't break the bank? Thanks

[@AirgunDetectives]

I have had one of these for several years. If you take care of it will last for years amzn.to/3KoiW5D

[@penguinclips9551]

Good for hunting as its very light and has a regulator in uk

[@rogergoodwin5533]

Why is centerline of bore to x on redicial so far?.

[@CommonAk907]

Just bought your trigger screw for my Gamo Hunter Swarm 10x, can't wait to tune my gun and get it ready for the hunting season! #AlaskanFan🌍💪

[@AirgunDetectives]

You will love the upgrade! I appreciate your support 🙏

[@CommonAk907]

@@AirgunDetectives just received my trigger screw for my Gamo Hunter 10x Swarm. Thank you for the fast delivery/upgrade.! #AlaskanFan💪🌍💯

[@williamarmstrong392]

I enjoyed the review. The Walther is a very nice gun .

[@AirgunDetectives]

Thanks again for tuning in and I appreciate you leaving comments 👍

[@neyazahmadkhan7736]

HOW MANY PRISE OF COPMPLITE SET OF THIS AIR RIFLE SCOPE,BYPODE, ETC

[@chevelleman88]

I need.

[@fishinghunting7275]

How do you get the scope?

[@soylientgreen8618]

how do you fill?

[@RayRay-vv9kb]

Quick question, does the fill probe that comes with this rifle a probe that doesnt require me to buy a adapter to work with most compressors or foot pumps?? A Foster type connector?

[@AirgunDetectives]

Yes...the probe has a built-in Foster fitting. You are good to go👍🏻😉

[@RayRay-vv9kb]

@@AirgunDetectives What was the brand of scope and power on this scope used in the review?? I didnt see it in your links.

[@MajTom128]

The trigger can be adjusted without splitting the stock. Just remove the butt stock screws and loosen a few screws in front of them. Now you can remove the plate and adjust the trigger screw.

[@johancahyadi6905]

Absolute hunting rifle in compact

[@AirgunDetectives]

Perfect for hunting!👍

[@10ring60-bp5ml]

thanks

[@JoeDplummer_]

Great review !... I agree those screw holes look pretty bad 👎

[@AirgunDetectives]

Joe, thanks for tuning in 👍🏻

[@ngamshim]

Nice sharing 👍 new subscriber here 😊👍

[@AirgunDetectives]

Welcome! I appreciate your support and thank you for your comments 👍🏻

[@CaptGus]

Could you show us how to switch the charging handle from right to left side

[@AirgunDetectives]

They have complete instruction in the manual. It is an easy process but you do have to separate the stock. Happy Shooting!

[@CaptGus]

@@AirgunDetectives Swapping charging handle sides.I did it ,wasn’t too hard and I cut about two loops of the existing trigger spring and made it ridiculously light and clean but the safety and yes the detent it popped out and I lost the detent so I don’t have a safety now. lol can’t win them all. If I can only find The tiny detent. Knew what I was doing but I just let it get away from me. Talk to guys at Umerex they sent me a schematic and told me to point out what I was talking about( The safety detaent) which I thought was hilarious and then they said oh you need to send it in 🤦🏼‍♂️

[@HAMAZA-x7d]

💛💯

[@RayRay-vv9kb]

Anyone have issues with fill probe? I sometimes have to re-insert it or slightly press it in to fill the gun..any ideas? ( ill call Umarex and ill also order a spare, but im thinking a out of spec.air probe insert opening or undersized o ring) any opinions/ knowledge appreciated..

[@AirgunDetectives]

Make sure you use a little silicone greese on the probe o-ring. Use the diver's grade silicone. Make sure the o-ring is always moist, and you should have no issues. Eventually, the o-rings will need to be replaced for normal wear. Happy Shooting 👍🏻

[@RayRay-vv9kb]

@@AirgunDetectives i just got the Walther a few days ago..shoots extremely well, especially with 25gr slugs..hope to chrono some today..ok thanks..

[@RayRay-vv9kb]

@@AirgunDetectives any specific brand you suggest??

[@user-dk7zz5ph6z]

Por favor redactar en español sobre el reing gracias.

[@Gunner-ll1zd]

How did crosman cheapo pellets group?

[@AirgunDetectives]

For plinking they will work fine...don't use them for any target shooting competition 😉

[@davidacosta147]

Been having alot of springers & gas ram now i want this one a PCP NOT BREAKING THE BANK AN IT LOOKS AWASOME THANKS.

[@JoshWrld999]

Is it ok to put a Inlet 4500psi, Outlet 2200 psi Compressed Air Regulator on a Tank 13ci Capacity 3000psi AirTank.

[@AirgunDetectives]

Absolutely...that just means the gage is rated to 4500 psi. 👍😉

[@JoshWrld999]

@@AirgunDetectives thank you so much btw love the videos

[@robertrmckerrow1111]

👍🏼

[@jamesnelms1653]

I've had one in 25 for about 4 months. It's the one I reach for when I shoot. I have 2 regulated guns but the fit is just more comfortable with this thing. Just wish one of the airgun gurus could put a regulator in it.

[@AirgunDetectives]

Hi James, I really like shooting this one! Thanks for tuning in 👍

[@descargaelbano]

Scope sits way too high off the barrel for me. Close range shots at moving pests in the tree and on the ground from 30 to 100 ft would be a nightmare to guess where the pellets going to land.

[@2002ZRX1200R]

Went to check out the scopes and already out of stock ,:(

[@AirgunDetectives]

They went so fast! However, I will be getting a few more soon. They quit making these and I was lucky to find some old stock.😉

[@AirgunDetectives]

I just discovered one more in stock. I hope to get some more next week. airgundetectives.com/product-category/optics/

[@taewankim6283]

Germans know how to make great guns.

[@AirgunDetectives]

Can't argue that one!👍

[@chrisreilly4006]

I’ve been so attracted to this rifle since it came out but there are a few things that kept me from buying it. It is a little under powered. It’s not regulated. How many shots did you get on a fill? Good shots? I heard it was around 40. That and it seems a bit over priced for what you get. German guns are great we know this, but my last Walther air rifle was nothing to brag about. Thank you for the review ! Always appreciate seeing air guns getting thorough reviews.

[@TuttleScott]

did you even watch the video?

[@AirgunDetectives]

Thanks for tuning in...we cover all that info during the review 👍

[@AirgunDetectives]

@@TuttleScott 😉

[@chrisreilly4006]

@@AirgunDetectives I must have missed that in the video.

[@Light_357]

Are you positive this isn’t an umarex gun? Pretty sure Walter has nothing to do with the manufacturing.

[@AirgunDetectives]

It is a Walther and it is made in Germany. Umarex has the exclusive rights to produce it but it is indeed made by Walther. Happy Shooting 👍

[@2kMario]

3:14 Designed in Germany secretly made in China

[@johnrusac6894]

Really?

[@jeansandmyshirt]

Kral guns are pure garbage. No regulators. Cheaply made. And many come defective brand new out of the box. Kral kervan etc try to copy fx or other reputable brands.