Washer/Dryer Stacking Kit Installation W10869845

Buy part W10869845 now: www.repairclin...
Tools used: 9/16" wrench, adjustable wrench, slip-joint pliers, flat head screwdriver, Phillips head screwdriver
Buy part 426 now: www.repairclin...
Buy part 181CB now: www.repairclin...
This video provides step-by-step instructions for installing a stacking kit, which can be used to vertically stack a washer and dryer. Please note that you will need an assistant to lift the dryer.
Additional dryer repair, troubleshooting tips, help with finding your model number, and part replacement videos: www.repairclin...
All of the information in this stacking kit installation video is applicable to the following brands: Amana, Maytag, Whirlpool
Connect With Us!
plus.google.co...
/ repairclinic
/ repairclinic
/ repairclinic
Join our free VIP email list for discounts and money-saving tips: tinyurl.com/pnn...
Check out our blog: www.DIY.RepairC...
Don't forget to like and comment on this video, and subscribe to our channel!

[@OwnYourOwnBus101]

Repair clinic, I get the feeling we all came to this video for the same explanation: How to hook up the washer dryer connections behind the two units in such a confined space? Could you please do a video on that? If you have one can you post it in the comments?

[@rickf659]

I was about to say the same thing.

[@AriannaAyers]

This is my favourite channel on KZbin. My children think the channel is fascinating, and lovely as well.

[@repairclinic]

We appreciate your support!

[@blessedarmadillo8257]

That you, Mr Robot. Your warm, sonorous intonations have reassured me and will propel me to complete my project with great alacrity.

[@louislaplante4838]

You guys make it look easy. Great job

[@repairclinic]

You're welcome! We are always happy to help. If you would like to give us a review on Google, we would much appreciate it: g.page/r/CcVUrahZNozMEBM/review We hope that you have a great day!

[@sethmiller6201]

Is there a video for the dryervent yet?

[@kellismith4329]

The vent installation will be unique to it’s surrounding/positioning, youcan also reverse the swing of the dryer afterwards so they both open and close the same direction as it is inconvenient to use them that way.

[@LilGrimey5Star]

Where does the heat from the dryer go when it’s in use though?

[@minnesotadryerventguys]

So home owners doing this.... We need access to the back of the dryer & Remember you do not want to use flex ducting on a gas dryer. Why? because it traps the lint in the crevasses, also messes with the air flow, which will cause a back up in the line and then carbon monoxide comes into the house from the air holes in the dryer, please install a CO detector in the laundry room!! Don't rely on a smoke detector in the center of the house. you need time to get out before the gases get to the center of the house. Most of us dryer cleaners see this one a week. looks pretty but really makes it difficult because doing this causes safety issues. as great as it looks... it's not safe.. your dyer has to breath as well.

[@anthonygilmore5969]

Thank you so much for this. It helped me a great deal. Have a great day.

[@jonnychingas5757]

What about the washers water hookup and dryer exhaust and electric connections??? These appliances don't have any???

[@antoniomelendez3919]

That was a great and simply put diy video thank you 🙏🏻👍😀

[@repairclinic]

Appreciate it thanks!

[@Rajendra-v5l6q]

STEFAB STACK WASHER DRYER MODEL-STX 10 Drum motor not running motor perfectly ok

[@hansenland]

Very very helpful. Thanks!

[@josebenedico7379]

How do I clean the dryer conduct? It's hard to pull out both machines at the same time out of that hole

[@punker4Real]

get two strong dudes from homedepo

[@user-kf2vv4dt2k]

Wet the floor. Once the feet become wet. The whole unit will skate out

[@NoName-zz8nl]

@@user-kf2vv4dt2k 😆😂

[@sethhorst6158]

How do you remove it? The house I'm moving to with my family has a stacked unit installed blocking the stairways to go up and down leaving the wooden stairs outside as the only way to go upstairs an downstairs.

[@lpsmlp4570]

It's should never block the stair ways that's stupid

[@jeffhardman73jh]

I did not hook shit up they just put it in place

[@bentcn8511]

heavy

[@hoperules8874]

mmkay...no instructions on how to lift the very heavy full size without summo-wrestlers around...

[@hannagoodbar6596]

Missing: how to attach the dryer exhaust. You can see round flexible exhaust in the first open closet shot. Glossed right over that step.

[@Ereaes]

Install "according to the instruction manuals."

[@ericwhitedude]

@@Ereaes - Bwahhh hhhahh!!!

[@mrsatire9475]

How did you hook up the dryer vent hose?

[@salvadorhpo2030]

I always get hungry while doing the laundry. Please explain how to install a microwave between washer and dryer.

[@jake_runs_the_world]

player2030 omg same !1

[@pawanhundal5245]

🤣🤣

[@agraitlopez4485]

Funny

[@garebgg5176]

Jajaja

[@NoName-zz8nl]

Lol please never attempt that

[@skysoul2022]

How do you remove the screws that connect the washer to the dryer if there's no space to squeeze around behind the appliances to unscrew them? That's our issue ... we can't pull the appliances out because they need to go over a piece of hardwood to come out (thus we need to pull out one appliance at a time), & we can't reach the screws to unscrew the dryer from the washer. Thank you!

[@fan3002]

Did you figure this out?

[@skysoul2022]

fan3002 We hired someone who very carefully pulled both out at once using with what little wiggle room we had to work with. He wrapped some sort of strong belt around the one on top to help pull them out. It was super challenging though.

[@fan3002]

@@skysoul2022 Understandable. Mine is upstairs and it has a drain pan underneath it that is plastic and I can just picture this getting broke. I knew when I bought the home it was in a bad place but I had to go with it.

[@leuchtag1]

You should include how the exhaust vent will be SAFELY installed in your stackable inside a cabinet!!!

[@ZeitGeist_TV]

Clyde Leuchtag Electric dryers don't need as much space as a gas dryer would. Also the most you would deal with is condensation depending on the setting you use it on.

[@multi-wreckz712]

Yes they do! All dryers need to have a good vent installation. Or else you will have a restriction. And a small cabinet means you won’t be able to go back there and shortened the vent.

[@jeffcostanza6802]

When was the 1st front end motor stackable made

[@crewkittylove]

Would this work for a kenmore elite?

[@justchillins1c3l46]

Where do you get this bracket from? I asked lowes and home depot and they dont have stacket kits like this? Id like to buy please.

[@justsaying5753]

Got mine on Amazon

[@vdarr1]

Will this work on whirlpool wfw93hefwo

[@francoisj.interiors2090]

I have problems with all BOSCH products?? Unhappy with the quality at all.

[@angelsolares8801]

this kit can be used for a frigidaire washer and dryer, and another question this is similar to a rack to place the dryer over the washing machine

[@LilianaMartinez-jt5mk]

just to disconnect a washing machine this place called Toronto decorating charged us $850

[@CMARTINEE123]

is this for any 27" washer dryer say if you have mixed brand units?

[@ivancurtis]

Two absolute studs

[@erickmatamoros7281]

2:47

[@skybuck2000]

Always handy when there is no de-install video and manual lol.

[@mattalbrecht7471]

But ow do you make the dryer vent, water, and discharge hose connections? i am building an enclosed washer & dryer "closet" and space will be tight, but it will meet the requirements you set for venting and stuff. how do you connect the hose and dryer vent and stuff, then scooch it back into the closet?

[@punker4Real]

Attach the hoses before hand duh

[@TheCuringa123]

How do I get the stuff to put together? The ones on the video?

[@puddgyballerina1]

Contact your dryer's manufacturer if it's not in the bag you should have received when it was delivered--it should also contain the drum locking pegs

[@erinkstaton1118]

Stackable kits can be purchased separately at home improvement stores.

[@NoName-zz8nl]

In general all it is, is a mending plate

[@Cookmozter01]

I need the correct measurements on everything

[@adoptedchineseboy]

Is it possible to stack 2 washers instead of 1 washer and 1 dryer?

[@doom6787]

No, washers move a lot and they could make the entire tower fall, and they are a lot heavier

[@vdarr1]

Seeking stack kit for Mid # wfw93hepwo