Рет қаралды 774,922
Is your Fisher & Paykel Washer not draining? Most likely it's a clog in your drain pump. In this DIY episode, I'll take you through the steps involved in diagnosing the pump. It may just need cleaning, or you may need a new one. Here's a link to purchase a new pump on Amazon if needed: amzn.to/2HzmKVZ
Need pick tools? They're so handy!! amzn.to/2ukKTH9
In my case, it just needed cleaned, but a couple years ago, I had to replace it due to a bobby pin binding up and burning out the pump. Hope you guys enjoy and let me know if you have any questions.
WARNING: Don't let the water make contact with your pump! This may ruin the motor. If you can't remove 100% of the water, then quickly get the pump fully removed and out of the way before too much water hits it.