Watch DIABLO Blades Cut Through My Steel Like Butter, "CRAZY FAST"

[@stillrandy]

I'm a carpenter and have been using Diablo blades for years in all my saws, but this just blew me away. I'll be out looking for these now.

[@justinbianchini9697]

Sawzall blades aside, the steel demon blade cutting through that I beam was definitely impressive.

[@Ofmyownvolition]

My buddy mike chopped a minivan in half with a 7 1/4 saw all he did was flip the blade backwards and went at it!

[@Robalo-2660]

Thanks Ron , I've used Diablo blades in the past. You just proved how great they cut and that's why I'm a loyal follower of your channel . Love you my brother . Great content and you are great American Patriot.

[@rickjwilliams]

22 sec lengthwise, and 9.9 sec crosscut. Amazing ! Diablo blades are the best in the business. I really like their blades for woodwork. Cuts like butter everytime. Leaves a clean smooth finish.

[@robertchambers5821]

Imagine staring at a crashed car, with injured occupants, reach into your tool chest and you have a very good chance to get them out before the fire truck arrives. Granted you would have to keep in mind fuel volatility. Awesome video!!!!

[@texasproud5612]

Sold I'll take some...for sure that's my next go to when cutting metal.🤘🤘😮

[@TheBackinblack333]

Interesting. Thanks Ron. Waiting to put some money aside for a bunker. You're the only one I'm calling for a bunker, not the Rising S bullsh*t.

[@redfaux74]

You mean Dropping S....

[@JM-yx1lm]

@@redfaux74 you mean demolition ranch shelters

[@JM-yx1lm]

@Gideons Word ya hes alright but he does a bad job acting like he knows everything. This same thing happened when he bought that ford diesel truck that everyone said stay away from and he acted like he knew what he was doing and ended up having to sell it for scrap.

[@OhioPrepperOne]

I’m sold, great video, great products!

[@Lickemstick]

I've used Diablo blades in the past and I'm proud to say they hold up just as good if not better than sawzall brand, Dewalt, etc. The ONLY gripe I have is kind of universal that if you heat any of these blades up, regardless of manufacturer they all fail and fail fast. If you wanna max the life out of any pro-sumer grade blades keep 'em cool and that'll keep 'em sharp! Be that through a coolant fluid or just taking a few minutes extra between back to back cuts. TLDR: Diablo is great blades but have to keep them cool while cutting!

[@_EllieLOL_]

Me: alright I finally got my super secure bunker Him: cuts thru bunker steel in 2 seconds Me: ;-;

[@gingerman5123]

20 years from now when I'm the leader of my merry band of marauders in a zombie apocalypse I'll be sure to have a tons of these blades on hand... for reasons....

[@MrRbrgrn]

20 years?!?! With everything going on this year I’d stock up it could be the next thing that hit us lol

[@dcb1138]

Try this November

[@doctrinedoomsday6953]

If you had a workshop with all the right tools, like Diablo blades, your inventions cant be stopped.

[@madshad3351]

"IMPRRRRESIVE!!!!!(heavy r trilling) As a artist working with metal, tires etc. I am definitely getting this stuff. You just CUT my salvage and dismantle time to mere minutes instead of days. Amazing. Thanx.

[@kr8196]

Yes sir Diablo blades are the shit I used Diablo to cut everything even my sawed-offs get on board Ron

[@Demonicwizard22]

I can’t help but think about how these are tools that can break into the bunker now. How thick are the escape hatches?

[@davesanders9203]

WOW!!!!!!!!!!!!!!!! TIME A 1,000. They could not have gotten better exposure than being on your channel.

[@kliegerk5970]

I have used their blades in a reciprocating saw for wood, had no idea they were that good for steel.

[@jamesdonovan5165]

As a journeyman tool and die maker for 13 years, that's impressive! On my shopping list now.

[@skm9420]

Yep, Diablo makes really good blades.

[@SRFDriver]

This is one of the most useful videos I've ever seen on KZbin

[@redfaux74]

Time is money. I love your videos Ron. Stay positive. When you crest your enemies will fall hard. Integrity is everything. Everything, every good thing, is built upon integrity.

[@brothercode2488]

Lol integrity with a dumb ass Trump shirt and hat on

[@skyjumper999]

Most effective Diablo commercial ever. I'll be getting some this weekend!

[@nzer57]

The reason the chip heats up while the piece stays cool is simple thermodynamics and mass. The large mass of the piece simply wicks away the small amount of heat generated at the cutting site compared to the tiny mass of the chip which must transfer the heat to air which is roughly 20 times less efficient.

[@JamesSmith-ue2ow]

Smitty SF-3751 Show and tell, best advertising in the business, man they are a vast improvement over some of the blades I have been using. Keep them coming.

[@TheAussieincalgary]

I use diablo for cutting wood at home with my circular saw, the blade has cut a lot of timber and still cuts like new, nice to know I can get a metal cutting blade for my saw.

[@4by4squared88]

I just bought two new containers this week. Great timing. I was going to use my grinder with a cutting blade but no more. Thanks.

[@mcscheck2000]

SOLD!!! I have blades designed to cut aluminum but this here is just plain mind blowing... Gonna go grab me at least 1 of everything...

[@RANDALLOLOGY]

Finally a metal blade I can use on a regular circular saw. Going to GD and get one. Perfect for my work drive saw I don't use much anymore.

[@Roy-vn8wh]

Holy shit, I know my next purchase

[@joelh3364]

Never would have thought. What a great solution for a typical handy dad!!!

[@danw1955]

Man, that circular blade is nuts! No way I could cut that quickly and accurately with a torch (or even a plasma cutter!)😮

[@davidquirk8097]

Thanks for giving the guys from Diablo the time to showcase these products. Im certainly going to give them a try.

[@craigl9021]

Great Video...I have shared it with my DIY friends...You have a great platform to demo more products for those who enjoy your channel but would not necessarily buy a shelter...thanks for info...Diablo all the way.

[@curtissheppard1996]

Holy crap....im sold. They are great blades. Gorgeous cuts.

[@Blackpanther_risen]

The Diablo blades are great but I think Makita deserves some credit too.....LOL

[@OCnStiggs]

I have used Diablo wood blades for years and they are THE BEST. However, after meticulously avoiding nails for all these years, the thought of running a new Diablo blade through an I-beam is a shocker. But, that is my problem and I promise I will work on it! Lol... After taking up welding a few years back, looks like I'll have to grab these for sure!

[@johnhall4429]

I've been using them they are amazing

[@veronicawest3749]

We use theses at the farm and our other business love them, we just cut off a set of rotted pulleys from a fertilizer cart with a recip saw and went right through without scoring the shaft on a already well used blade.... worth the extra $$

[@coopertown7867]

Theses blades are great!! I use them on a regular basis and they hold up well💪💪

[@2007bowman]

My Jaw Dropped! Amazing - Only improvement would be a LINK with a DISCOUNT. Blessings

[@jodym.2800]

I own one of the circular saw blades but was unaware they are that good. Time to play a little !

[@blanchy]

This reminds me of when the door to door vacuum salesman comes by and you make him clean different rooms to "test it out"

[@LOGDOG5375]

That was awesome! 21 seconds to rip through 1/2" steel ... wild!

[@jinx0192]

Used their blades for wood cutting. Great stuff!

[@williammccaslin8527]

I like it, but here's my question to you since you run a business, the cost of using these versus a gas axe an tips, cost vs cuts, An I'm all about technology, thx for the vid.

[@cuzz63]

If you were cutting miles of metal without stopping a torch might be better but he is using a cordless saw and the metal is cool. So you can quickly grab this make a few cuts and use the metal right away, not to mention you wont need to grind your torch cut edges.

[@Truck_addict_productions]

Hey rob it’s Ben great job with the video 👍

[@alcantrell5340]

Awesome 👏 who knew, I’ll be heading to town to scarf one up. Thanks for this great video and information.

[@funfreq9282]

Diablo has come up with some great blades! I'm sold!

[@catherineharris4746]

Fkng Outstanding! Just what I've been looking for!👍👍👍

[@Shop_Simplicity]

Love Diablo blades used for years now

[@Scuba11000]

I am going to get a couple of those blades for my skill saw for a Bandsaw mill build project for sure

[@rodneyhoadley8157]

I got the blade I put it on my skill saw all I could say is wow it cuts through steel like butter I cut an inch and a quarter thick Steel it took a minute to get through it but if you go slow and steady no problem and the thinner stuff cut like you wouldn't believe unfortunately me being lazy and not putting the wood blade back on to cut wood and now I used it on some rebar and it seemed to be doll

[@johnpyle8027]

I am familiar with Diablo Blades and I love them. I have them in all my saws for wood and both for my reciprocating saw. I literally (2 weeks ago) bought an Evolution Chop saw and an Evolution Circular saw. When using the circular saw I have to wear my welding jacket, welding hood set to grind and welding gloves. It throws chips like a damn chain saw. Ive only used it twice. The chop saw is better, but the cuts are never true and I have adjusted and tightened EVERYTHING. I went with the Evolution because of the reviews and the saws don't turn at as high RPM. That is what people were saying the secret is. You guys are in T shirts! I see a returned purchase in my future unless someone can think of anything I am doing wrong!

[@red-doggracing5557]

These things are awesome ordered a bunch of theses

[@Mixwell1983]

Diablo is awesome, i use their 24t framing blade in my circ saw and the carbide metal and demo blade on recip. Their steel demon blades are insane..

[@vandreiman1898]

How long does the blade last cutting the thin and the thick material?

[@davesanders9203]

It last a really long time on thin material and not so long on thick material! How much is YOUR time worth? Previously his workers were cutting with a torch - THEN - cleaning up with a grinder of some type. I can really see him "cutting" his cost with theses blades.

[@AtlasSurvivalShelters]

Hello from Atlas 😊👋

[@garylangley4502]

@@davesanders9203 That's what a lot of people don't consider, saving time, even if you aren't running a business. I repair the family cars, and yes I could use a breaker bar and socket to remove the lug nuts, but I bought an electric impact wrench for that. It's quicker and it doesn't wear me out. If you are running a business, saving time saves you on the high cost of labor. The cost of tools like this is almost nothing compared to the cost of labor.

[@berryreading4809]

They last much longer with a lower rpm circular saw! With a regular 13/15amp 115v makita they are noticeably duller after a few cuts.

[@AtlasLathe]

I am sold. I will be trying these blades

[@danielww9022]

I fancy myself fairly decent with a torch, but I'd submit the devil to a choke hold long before I blasted through ½inch steel with those results. Home Depot, you say? I'll be there this weekend, for sure. And your hat & shirt have earned you a new subscriber.

[@mrme4691]

You better make sure Jack Nicholson doesn't play his part in The Shining and come looking for your bulletproof door with one of them cordless saws, and on the other hand it would be very handy when the wife is on a 24/7 bleed and she's got the key to the door you could cut hole through the wall and run the nearest pub.

[@SuperUncleRyan]

I always request Diablo when our driver is picking up blades. I hate the name but love the product.

[@keithrichards4513]

I`m Buying a Blade Rite Now!! Looks Great!

[@denislavdochev3783]

Probably the best blades out there. So sad they don't any executives here in Europe. We gotta rely only on Amazon for delivery.

[@JustinTopp]

I’ve got some 1” plate to cut. Looks like I got something New to experiment with

[@danietkissenle]

thing about those cutting discs is that you get a huge burr and the back of the metal as well as taking twice as long

[@toboinc567]

Don't know if i said this yet. But LOVE the new intro video kudos.

[@superspark813]

Are the blades made in America? And what happened to your last video response to Matt?

[@guilhermechecchia6914]

I was wondering that too...

[@AtlasSurvivalShelters]

I made my point. Ok don’t need any more drama over Matt but my die hard followers know the whole story now

[@zuegma666]

Atlas Survival Shelters I think that everyone knows the facts behind Matt, so you are doing the right thing and he will learn from experience. Keep up the videos as they make my day seeing your enthusiasm for your own product. God bless you.

[@drmosfet]

With these new blades, It would be easier to build your shelter now, but at the same time, also easier to cut into your shelter now? You now need to know what it takes to dull these new type of blades. Would have liked to seen that type of blade on a large cutoff saw in action.

[@nateb4543]

Just a home hobbyist and I'm reluctant to use my 6-1/2" 18v makita on steel like this. Plan on using my saw for life. So I would buy a used, corded saw for steel. Is this a valid concern? Also, after buying my first angle grinder and watchinga few safety videos, discs freaked me out so I got the blade and it's held up very well

[@foodparadise5792]

Thats a valid concern. Metal saw and wood saw operates on different RPM. Metal saws have higher torques for obvious reasons. Surprised no other comments point that out.

[@barefootbandit1]

Wow I didn't know these things existed. I am going shopping

[@1nfinitReality]

Love the shirt!

[@AtlasSurvivalShelters]

Go MAGA. Let's go Brandon

[@ChristianBaril]

So anyone with one of those blades can get into any bunkers!! ;)

[@haileyArevan7176]

Hi,for 355mm cutting blade how many teeth is best for cutting thick metal using cut off machine.thanks

[@DigitalCircus777]

Great video, Diablo Blades Rock and Love the Shirt! 😀

[@carlosperegrin5935]

SOLD!!! tomorrow I’m going to get my Diablo set

[@michealfigueroa6325]

I've been looking for a cold cut metal saw for some time. Problem has been spindle speed of power source. 5100/4000 RPM beats the hell out of 1400RPM.Thanks for the heads-up!

[@whatfreedom7]

That’s crazy! I would never think a circ saw with a blade could do that much less being rechargeable.

[@marcegrecco53]

I use their wood cutting blades, but I will for sure try their metal cutting blades.

[@matthewwoods6480]

I work with these products, they are good 👍 ☺ 👌

[@MonkeyMikeOutdoors]

Wow awesome AF! Love the Intro Ron!

[@btrswt35]

I wonder how well would that circular saw blade would work on a miter saw. Could be a real option other than a abrasive chop saw.

[@pagexi3394]

Diablo is definitely a cut above the rest, used their products for years 🍺

[@rexoliver7780]

Would like to see how these diablo blades cut railroad rails! Do have some of these blades-they are incredible!Beleive the train rails would challenge both the circular blades and recip blades.

[@leeuniverse]

WOW... A standard looking cutting blade is doing that instead of the abrasive cutting disks. Crazy!

[@erksmirk484]

That was impressive great job dude’s

[@DougInParadise]

I always use Diablo blades for wood but Holy f*** that is awesome, I am going to get some of those. thanks for the video

[@wemcal]

Wow.. that’s one bad circular saw blade!!! And what’s more impressive is the 36v cordless saw! I’m still at 20v.. I use the recip blades all the time. That angle grinder blade is a must get! great video

[@Calisun73]

Yup going to get one today sold and sold

[@MrStanwyck]

Awesome video Ron... I’m definitely getting the cutoff wheel for my Dewalt grinder for a job I have coming up...

[@jopiaspieder1184]

I definitely will be getting those blades soon

[@dwarvengamesmith9726]

Done I'm picking one of those up!

[@rrmerlin3402]

Back in the day I would use a plywood blade mounted backwords to cut corrigated metal with a skill saw

[@Mixwell1983]

I dont always cut metal but when i do i am goin to ditch my 7" cutoff circ saw wheel for this.. God damn

[@tribulationprepper787]

Can you imagine having to spend an entire evening trying to talk with the guy in the red hat? YIKES!

[@AtlasSurvivalShelters]

Yes we can. Trump 2024

[@michaeld954]

Ok i want one of those blades now

[@leatherneckprepper4477]

I would love to see what you could do to a rising crap bunker with those. You could get into one of their bunker so fast it would be a miracle if it takes somebody more than 30 seconds

[@AtlasSurvivalShelters]

Let’s do it. I’ll cut one up in the renovation video.

[@johnzacharias7884]

Back to the video holy crap they cut fast

[@cletusrobinson]

What’s missing is the name of these amazing blades so we can get them!

[@freekingawwsome]

Looks like I'm sharing with everyone

[@lauriestlyon8773]

I live on a steel boat. I have some work to do and I hope these blades are available in the UK.

[@rickwashek478]

Awesome, I will be getting these blades. AWESOME SHIRT WHERE DID YOU FIND IT !!!!