My CHEAP V6 Camaro Sounds Like A V10 After INSTALLING The Hooker RACE Exhaust

I bought my $4,000 2011 Chevy Camaro RS with failed timing chains. After replacing the timing chains on the 3.6L LLT V6 it was timing to start modding it. 128,000 miles in the car is getting some SS touches and the Hooker Blackheart Race exhaust.
J&J Auto Wrecking: bit.ly/GoJnJOH
Hooker Blackheart Race Exhaust: www.holley.com...
MERCH: shopWatchJRGo.com
Shop Motul: motul.com
---------------------------------------------------------------
Common Questions:
What motorcycle do I ride? A few. Ducati 1198, Honda Goldwing, Honda Grom, Honda Ruckus
What do I do for a living? Make KZbin videos.
Can you wheelie? No, I suck.
Are you fast? Sort of. I suck mostly though.
Where can I keep up with you off the bike?
Instagram: WatchJRGo
Facebook: WatchJRGo (or JRGo, FB hates my branding)
Do you go to school? College, for 2 classes.
Why do you ride so dangerously? What do mean? I was doing 25.
Do you go to the track? Of course, hopefully there will be videos in the future.
Do you play video games? No, but I might stream N64 Goldeneye at some point. Twitch: WatchJRGo
Are you afraid the police will watch your videos and arrest you? Something something evidence something something warrants and due process of law
#CarRescue #V6Camaro #CheapCamaro

[@ViceGripGarage]

Wellll, I just can't believe it. But I guess I gotta, I'm lookin at it. That's more stainless gear than a guys got in his house

[@aarond23]

We need a vice grip/watchjrgo collab....

[@erroneousjoe1301]

Weird coincidence that I regularly watch both of y'all!

[@RedneckTaZ]

Nice for him to give you the shout on on using the old strappy strappy puller thing to "whiiiipppp" put that exhaust right in there.

[@chrisjames8540]

I like them both!

[@Ether7]

Well I'll be dipped!

[@mikeywalnuts7015]

The next "2 Minute Mod" should be removing the dealer decal. God do I hate dealer decals

[@mikebrowne477]

Thought the exact same thing. I've never left any dealer with one on a car. That's non-negotiable.

[@robj2704]

Bought a new car last year. The first thing I did was remove all dealership stickers and license plate frames, etc. If they want to have their ads all over my car they can pay me.

[@2dfx]

I consider it a form of vandalism. I've always had my car purchases state in writing "no dealership stickers". They wanna give me a licence plate frame? Sure, I can remove that easily. But a sticker is sacrilege.

[@pablopicaro7649]

I like Dealer stickers! when I see a rusted out heap I can always laugh about it coming from the Rust Belt Salted road zone (mostly couple hundred miles either side of I-80 )

[@toddrobertson1398]

You know it never bothered me until a boss brought it up about my current BMW.. I took it off and your right it looks so much better. My boss was like why do you want to advertise their business. They wouldn’t advertise yours lol good point

[@asmongoldsmouth9839]

*DEFINITELY sounds like 1/2 of a V12. Very nice!!* 👍

[@primerexo2351]

In case someone wanted to compare the exhaust sounds Before sound 7:18 After Exhaust 12:10

[@uraniumnarium]

Kinda too raspy for stock maybe?

[@smellmyfingure]

sir that does not sound like a v10

[@yungtooli]

its identical to a viper

[@DJJumpdancer]

yung tooli have you even heared a viper ? The Viper doesnt sound like that

[@yungtooli]

DJJumpdancer its a viper trust me

[@yungtooli]

DJJumpdancer probably faster too

[@DJJumpdancer]

yung tooli the vipers i heared sound differend

[@mamaweegee123]

I don’t know how anyone could not like John Ross, he’s always so positive and just wants to show everyone how to do the things that he knows best

[@rustyshackleford309]

Its almost like your camaro is the generic straight piped 350z but less rev hanging

[@jovanibonillasalazar1797]

Never heard a straight piped 350z sound this quiet.

[@totalphotonicreversal3782]

I almost threw my phone when he said it sounded like a V-10

[@ChrisParadise-wv5iz]

Sounds like a V10 if it was the size of a Lawnmower.

[@KhepraPuHeru]

Lol

[@cr-mr4gr]

i love these cheaper projects. they are so entertaining to watch, love the vids!

[@UberHowie]

I do to. If you are looking for more channels that do the same I recommend Weird Beard

[@l2ikardo]

That's a $3k exhaust

[@Beary98]

"Cheaper" I spent less on my last 4 cars combined than the cost of that exhaust. Mind you they ALL still run and drive well (cept one that a gal smashed into :( )

[@WatchJRGo]

I linked the exhaust it was $900 🍻

[@Beary98]

@@WatchJRGo fine. Two of my last cars then :p

[@Mrperfectwoo]

>the key to working on rusted stuff. bro that underside looks brand new.

[@bryduhbikeguy]

Come to Michigan,USA and there's no place un-sealed that is "rust free".3 years and a Shock Absorber needs shop tools to remove,.Mostly a Torch.An 'Exhaust System' is usually 1 piece after a winter.

[@Mrperfectwoo]

@@bryduhbikeguy I hear ya man, I'm in Manitoba, Canada. Not quite as bad here with the salt but vehicles definitely are ruined after 1 winter.

[@JUST_ONE_ID10T]

@@bryduhbikeguy Just as bad in PA and if it's a 4x4 after 10 years they are rusted out to the point they are ready for the junk yard. 2 wheel drives not as bad as not everyone drives them in the snow if they don't have too.

[@ElliottAlvis]

It’s hard to tell, but I filmed the section where he puts the engine cover back on. A pivotal moment in this video. Just wanted you all to know.

[@fiffe7782]

Ya, got a little worried. The cover is like +50hp

[@WatchJRGo]

It's true, and it was a key moment 💯

[@AlvinBrinson]

@@fiffe7782 Yes, but we all know the *removing* the engine cover also provides +50hp, or all the car guys wouldn't do it. You can alternately add and remove the engine cover for infinite horsepower, btw. But you have to be careful of creating a rip in the space-time continuum.

[@pclayton5063]

Funny thing is that engine cover is as grimy as it was at the beginning. Clean the damn thing.

[@Robsav-yx6vi]

Elliott Alvis : it was the Best part Elliott . Your hired tell JR .

[@Brycereigle2000]

I wanted to cry when you called those bolts "absolutely horrible" lmao the rust belt sucks

[@daveh2612]

I know, those looked brand new to me.

[@WN_Byers]

@@daveh2612 same 🤣

[@ironpanther2420]

Agreed. If the bolt comes out without breaking, anyone in the rust belt is overjoyed.

[@BlueXonar]

Checking in from Europe, I hear ya... Those bolts were mint.

[@FuttBuckerByMutt]

Acme Do they cake the roads with salt over there too?

[@SirBoops]

> rusted car > can still see the threads on the bolts *cries in rustbelt*

[@standyourground9973]

must suck. i’m a florida guy, my car will maybe catch a tiny bit of rust from blowing sea air

[@MrWoodyBalto]

I saw that and said out loud,... Get the F*** outta here. If the head of the bolts have not been down sized due to rust, ur not dealing with rust.

[@kirbyswarp]

Yeah I bought a Saab that lived it's life in Ohio. Rebuilding the entire suspension was hell. Half the nuts were rusted round and everything was seized on.

[@Will_M600]

Cries in England

[@MrWoodyBalto]

@@kirbyswarp Yup.. Brakes, suspension and exhaust are just horrendous. Unless you are in a bind and have no other option, I would never buy a used car from the rust belt if you plan on keeping it. Use carfax. It's not perfect but you can weed out the likely nightmares.

[@derekchisholm972]

I think the PC term is “escort” race exhaust.

[@LauS0]

I think it's sex worker

[@DeadReckon]

If you have to ask why the hooker has all her teeth, she's probably a cop.

[@danielseelye6005]

I was always partial to "Soiled Doves" for euphemisms.

[@steelervette]

Lol

[@wakawaka5131]

No, the right term is "road side assistance" race exhaust

[@notj5712]

4:35. Even comes with a burnt out backlight.

[@anortiz94]

Had to rewind to see if I saw correctly...sure looks like It.

[@synthasia-5041]

Yep noticed that also... on the volt gauge left side...

[@stevearnold100]

Definitely sounds way better! Amazing what they're doing with V-6 engines these days.

[@SchwarzeTulpe]

Hey nice to see you watch Vice Grip Garage's channel. Derek is a hoot and the wife and I enjoy his content. Cheers.

[@Bumblebee4788]

Derek is the man to get dead cars running and then driving them home!

[@JoshuaBrown-is8fb]

Glad John Ross is in on the bmw joke too 🤣

[@davidgalinat4257]

Its meme worthy at this point.

[@haha_you_dead]

*Shout out to the car ninja and the use of his ramps and tools* 👌🏻🤣😂

[@mveno123]

“Those bolts look horrible.” Let me show you the state of my New England exhaust bolts.

[@autobotavengerfireballxl5339]

Right try living in Michigan or Ontario the rust belt epicenter....

[@pablopicaro7649]

Cars have little rust, if any, around Wichita. It gets only a minimal amount of Salt in winter. Above I70 is Rusty, above I80 is insane rusty

[@LSDelta92]

A fella really appreciates a good VGG reference.

[@bspencer415]

Cold snacks for everyone!

[@paulcarmi8130]

Jrgo has great content, and that's what we appreciates about him

[@kirbyswarp]

Sick cobalt bro.

[@LSDelta92]

@@kirbyswarp Danke! Matt Farah did a one take on it.

[@rafaobss]

One of the LED is dead on the battery cluster

[@icepop54367]

Thought I was the only one. Thankfully it takes all but 2 minutes

[@icepop54367]

He also has a license bulb out as well

[@civicboomer2135]

V6's Always sound better. It seems to be the firing order just makes for a good sound. Well done. Nice car.

[@jorgejefferson8251]

I lucked into your awesome how to video. I just bought a 2011 Camaro SS 1ss that came factory without the gauge cluster. This video just showed me how easy of an install it will be for me to do it. You just saved me money. You just got a new subscriber.....Thanks

[@jarredkuliszko]

Australian P platers with these engines in their "fully sick sv6" would like to know your location

[@jamesr5741]

ughhh!! Hate the sound of the sound of these and the 3.8 with exhaust. All I hear from the traffic lights near me "Mmmmm....mamama.....mooooooo...mooooooooooooo....moooooooooooooooooooooooooooooo......"

[@timjrvine]

Hahah

[@clubsport9334]

You're not wrong mate. They all sound fuckin horrid.

[@ONEJZX90]

Every car cruise, sound horrid. Makes an ecoshit sound good

[@cjdacka]

@@jamesr5741 3.8 sounds better with an exhaust than an Alloytec.

[@PrincessTS01]

Mallet="Tonya Harding" if you're gonna envoke VGG get the vocab correct.

[@garys9694]

JR probably doesn't know who Tonya was.

[@andy-in-indy]

@@garys9694 It's not like we can let that reference skate past him, though.

[@garys9694]

@@andy-in-indy That's cool can't think of a comeback for the skate comment. LOL

[@ViceGripGarage]

I'll be dipped.

[@garys9694]

@@ViceGripGarage I feel honored!

[@AvengingTragedy69]

Well I'll be dipped ole JR just have shout out to a guy! Love me some Vice Grip Garage was shocked to see you borrow one of his tricks wasn't expecting that at all.

[@1keykneedeep]

Turned out nice. Sounds incredible and the gauge pack is a must have.

[@brandonbman5921]

I’m not even a Chevy guy but I love the cheap Camaro content! Keep it coming!!

[@Sonny_V]

Another Stellar Episode from the One-Handed Auto-Tech.

[@itsnotme07]

So the BIG question is....will it be profitable on resale? Looks/sounds great! How AWESOME is the Car Ninja for allowing JR to use his shop/lifts/tools?

[@jeffeastman625]

Was thinking the same thing: 1) Sponsoring WatchJRGo 2) JR is renting space 3) JR is helping around the shop 4) they are just really good friends, and Johnny has an extra lift. Comment below. :)

[@mikecastleberry9671]

Bullbutter 😮

[@dmar9368]

I think that’s Hoovie’s M Coupe at 15:50. In his videos he always makes it a point to act like it’s not in his garage, now you JR? Lol

[@htwhls19]

I wonder if it’s for car trek. Unless it’s Doug Demuro’s since it’s got the Nantucket vanity plate 🤔

[@cayschavez3117]

The king of single hand dismantling

[@bryduhbikeguy]

That's what She said...

[@ganitzsh]

Still makes me nervous seeing him doing it

[@keno88]

Not hearing a V10, sounds like a 350Z with straight through system to me.

[@balesjo]

I did like the way it purred with the Hooker exhaust. Great upgrade. And the gauges were an absolute dream to install. That's one beautiful Camaro!

[@jessejess5393]

Never thought I’d enjoy a v6 Camaro series keep it up jr!

[@garykuhn1921]

Got your Tonya Harding out to get your exhaust in place? Ehh? Love vice grip garage.

[@revolutionday1]

I'd definitely STILL smash. You ever see that grainy video of her wedding night? LuLz

[@revolutionday1]

@Steve Miller Great- now I gotta' go sniff that ice....

[@therealboofighter]

For some reason I thought you were going to putting a set of headers on this car.

[@WatchJRGo]

I was but they were backordered for a month 😢

[@therealboofighter]

WatchJRGo will it still happen?

[@edfrawley4356]

@@WatchJRGo Pretty sure the 3.6 has integrated single port exhaust. What constitutes a "header" for this engine? ( and of all of the mods I have seen for this engine nobody has done a "header")

[@tracktoys9269]

@@edfrawley4356 yea that's for 2012 on up. the pre-lfx motor had an exhaust manifold for 3 pots each on each side of the motor. That's how GM pulled more HP out of the 2012+ 3.6 @ 323HP, this car 304 hp I think. I have a 2012, I love it. See my track vids on this car under my ID Tracktoys.

[@tracktoys9269]

@Master Baiter sorry I was a little off, the 2011 and earlier LLT V6's were 312 horsepower at 6,400 rpm and 278 pound-feet of torque at 5,200 rpm. The 2012+ V6 Camaros were rated at 323 horsepower at 6,800 rpm and 278 pound-feet of torque at 4,800 rpm. with the removal of the exhaust manifolds, changed MAF sensors and other components to boost HP.

[@yogisfriend7869]

OK...I'm convinced. I didn't object to the exhaust note on the stock setup and was waiting for this to sound like a "fart can". Impressive!

[@someonebald2022]

I like the sound of a nicely sorted V6. That one sounds pretty good to me. By the way, your license plate has a lamp out.

[@michellericard4850]

Lol shut out to Derek VGG love his videos too. I'll be dipped...... I don't know lol

[@DaleDriven]

Loving the camaro content. Great job

[@rayfalcon777]

Seat belt light is the passenger seat and sometimes the drivers seat scales they need calibrated or replaced depending on your money situation its cheaper most times to just replace them in the rural areas

[@wonkster1970]

My friend put dual exhaust on a v6 mustang. Sounded good but it was still a v6. He took it to a car show. Nothing beats the sound of a v8. Congrats on the new car!

[@matthewdutoit]

I own 1993 Ford Sapphire GLX with uprated V6. Sounds frikken awesome. Couldn't match other V6 sounds.... It makes my knees weak....

[@wonkster1970]

@@matthewdutoit there's just something about a Camaro and a mustang. My friend tried to make his mustang sound and look like a GT. It was still a V6 mustang. A v6 Camaro with an ss package is still just a v6 Camaro. Sounds like a v10? I had a friend that had a v6 Fiero. He said it sounded like a Ferrari. I'm glad to hear your car makes you weak in the knees. Never really experienced that with a car. My other friend loved Nascar. He would get excited over a v8 with loud exhaust. There is just something about a large displacement engine. :)

[@matthewdutoit]

Definitely. V6 is V6.

[@n84434]

9:20 Do I hear a Karen yelling at the Car Ninja???🤔

[@Cruzomeda]

Get that man a tripod

[@larrydeaton5452]

I really like the Camaro content. Gauge cluster looks better than it did stock. Keep the videos coming. Thanks.

[@robertcabrera6232]

I've been watching this #CheapCamaro series and have been impressed about how you brought this beauty back to life. One thing I've noticed, or actually haven't noticed you doing is the the mod on the PCV system. If you don't do it you're going to find your now pristine clean heads all gunked-up with sludge again within about 30-40k miles. The GM 3.6 High Feature V6 are notorious for their heads gunking-up, which constricts oil flow and contributes to the timing chain / VVT / oil consumption issues. It's actually a simple mod where you enlarge the 3 holes on the PCV hose to valve cover connector (it looks like an old school PCV valve on the valve cover). While you're at it you might want to add a quality catch can to further aid in reducing the oil consumption issue. Look it up there are many tutorials for the mod online. Best of luck!

[@jonathanlau1221]

Is it wrong that I prefer the sound of a straight-piped 2-stroke Detroit Diesel over this?

[@danielseelye6005]

Not at all, my brother.

[@autobotavengerfireballxl5339]

Nah man I love a high reving 2 stroke too brotha....

[@MapOfEurasia]

Awesome work! Hope you keep that one 😎 and I hope in more mods #ProCharger 😁 15:48 Finally a reference to the meme on "The Invisible Bimmer" from the "Dumbest Automotive Channel on KZbin". JohnRoss, the absolute madlad 😂

[@hyperbluewrx]

It is doug demuro car I’m guessing because of the custom plate

[@davidl2438]

Good video. Happy to learn you fixed the Camaro at a much lower cost compared to the dealer repair estimate. Look forward to your next upgrade on the car.

[@scottthurman3625]

Thanks love the gauge pack upgrade.

[@jmaxim80]

That v6 sounds soo soooooo good I'm jealous brother.

[@richardturk7162]

Sounds like a Mitsubishi or jacked up Honda Civic.

[@ema8246]

Sounds like a lilbit louder than a honda ex

[@gutterguy720]

Jon Ross, I appreciate the way you hold the camera to where we can see what you're doing. I know this means operating with one hand, but I appreciate it.

[@JerryDLTN]

JR, the one handed mechanic

[@ShinyRedGrapple]

Chevrolet, Volvo, BMW, MINI. I wonder, of all these cars, do any of them take the place of an Amberghini?

[@sealdogg8325]

Been wondering what happened to her ??

[@CuddleClanYT]

Seal Dogg pretty sure they parted ways, simple check of her insta shows she is with , or was with someone else.

[@sealdogg8325]

@@CuddleClanYT yeah I don't fuck with any social media .. kinda figured tho since haven't seen her in a vid in quite a while .. thanks for clearing it up for me tho ...

[@556m4]

@@CuddleClanYT What's her insta @ ?

[@DJJumpdancer]

14:41 it sounds nothing like a gallardo 😂 The first car i compared the sound to is a 350Z

[@danielvillarreal8892]

Did you ever modify the PCV which is what created the problem in the first place

[@MultiMegafred]

"There is an empty parking spot" Best friggin' running joke in the automotive KZbinrs world 🤣🤣🤣

[@douggerber83]

Whatever happened to Ambergini?

[@benrus85]

Was thinking the same thing last episode lol

[@motivvt]

Who cares tbh, but pretty sure they broke up. Come for the content not a broad

[@axxisblack]

Such a beauty and feminine, think they split in wintertime

[@_chipchip]

Alex I "Such a beauty and feminine" tips fedora... Dude stop creeping.

[@hojnikb]

They apparently broke up.

[@terryburke2587]

Still sounds like a V6. I wouldn’t have wasted the money

[@pablopicaro7649]

Sounds sort of like a ricer

[@Foggy404]

@@pablopicaro7649 Agreed

[@Kodiak97x]

He should have sold this car for a profit the minute the engine was fixed. I don’t know why he is wasting money ricing a V6 Camaro out.

[@daveh2612]

Hypesoul uhh for content for the channel? Some people like the budget builds etc. He earns money off youtube, not by flipping these cars.

[@trackhawktv801]

I agree sounds better but I wouldn’t do it

[@mitchellsoncksen2289]

PLEASE MAKE A VIDEO FIXING THE AIRBAG LIGHT. my SS has that light staying on and reminding me to service my airbags

[@matthewdutoit]

I own 1993 Ford Sapphire GLX with uprated V6. The sounds are awesome. So addictive sound. Couldn't match other V6..... It makes my knees weak. The exhaust system is Doug Wallace exhaust system. Sounds great.

[@jtelliso]

Heat gun remove that dealer decal on the bumper. What am I, a free billboard for business?

[@Stackali]

those wheels need to go. they make it look so stupid

[@georgegulden5819]

STACKANE agreed

[@matthewTobrien]

Gotta do an episode on removing the lame dealership decal from the bumper... 🤣

[@busydadscooking001]

Want to bet the M coupe at 15:50 that's oddly referred to as an "empty" parking space is John Ross making a snarky Hoovie reveal? Hehehe :D

[@jezuzfreek777]

This is a really great project. I love the gauge addition. Personally, I don't feel the exhaust is worth the price. It just sounds marginally better than the factory one

[@BlueXonar]

"sounds like a V10"? Dude, no. It shares no characteristics with a V10 other than the V shape... Sounds like a V12 would have made more sense, but still, no. It sounds like a 350Z.

[@netkeeper061]

this was a good segment JR, like the gauge package upgrade, can never have enough gauges and the exhaust was a good touch also...this should make a great choice for someone wanting a Camaro and not needing all the HP and maybe someone who can grasp the need for routine maintenance unlike the previous owner of this car..I still can't wrap my head around that....lol

[@stevefick3919]

Sounds pretty good. Much more throaty. I like how quick the gauge pack went in. Try doing that with a '69 Camaro!

[@soysauce3660]

Sounds just like a V6 would. No way near V10 level.

[@The.rafaell]

Lol, check out my v8 on my channel :)

[@mercury0214]

Adrian Rafael it’s ight kid don’t get cocky lol

[@The.rafaell]

Ok Dokey I’m not, I’m grateful 🙏🏻

[@latinoheat210]

Need to upgrade you Logo ...don't see yo many motorcycles in your channel....ha

[@shadowsystemsrc9389]

New exhaust sounds so much better and not too obnoxious.

[@unstablebobgable]

If I could help Watch JR Goes work on the Camero I would drink the cold Bartle Skeets and puff on the Cannabis Cigars and get all schmoked up.

[@dave11686]

Notification squad!

[@lennyenduro]

This is why nobody likes V6 "muscle car" owners

[@jefftreseder4358]

Posers

[@EthanRose666yudodis666]

Unless they act like what they have, there is no problem to having a v6 muscle car in general😃

[@redflint7651]

@@jefftreseder4358 aww what's wrong did a supercharged v6 spank you?

[@koolaid53]

The gauge cluster is a very nice improvement.

[@StevenDonaldonYouTube]

Where did you get the wiring harness from? I need a part number please!

[@DiversifiedMachinist]

Ok, so I ran across your video and see the BT on the plate. My plate has a SG on it so we're neighbors. And then you pull out a name-drop like my boy Derek at VGG? OK, I'm subbing. We're not into the same kind of stuff exactly but this series with the Camaro is in my wheelhouse. I'm into stuff like Derek does and off-road stuff. To be fair, again, the Camaro series is the first videos of yours I've seen but I'll be checking you out. Thanks.

[@Streamlined955]

This is your best project so far. Although, if the previous owner of the Camaro sees it he/she is gonna have a very bad day.

[@arnoldbass8709]

All you need is some headers in a cam it'll sound way better I just installed headers on my RS Camaro a few months ago

[@CupwakeRBLX]

You where right about the Oklahoma rumor. David Stanley (which is the dealership sticker on the rear bumper) is located in Midwest City OK

[@PapiDoesIt]

Nice sound, but it doesn't sound like a V10. A six cylinder has more degrees of crankshaft rotation per cylinder firing than a V10; therefore the optimal cylinder bank angle on a V6 would be 60 degrees or 120 degrees, whereas a V10 would be 72 degrees or 144 degrees. So it can't sound like one no matter what exhaust you install. But I like it!

[@gsppuffer]

Ninjas probably like where all these KZbinrs coming from in my shop and now they're borrowing my tools

[@Kuhladestkyicky]

If you’re excited that’s all that matters. I have a couple of mods that I wanted for my driving pleasure. Not to race, or make car alarms go off in a parking garage. Although that is a lot of fun!

[@steventrostle1825]

I would Sure wear eye protection when working on exhaust under the car, didn't 1 time so took a trip to the Opthamologist for rust in my eye and a scratch on my cornea. Cost double the price of the new exhaust. Glad you weren't hurt.

[@FalconXE302]

You are fast becoming a GoTo channel for interesting and fun stuff... Keep going Jay....

[@alexhoadley6814]

It never fails you click on a v6 Camaro exhaust vid because the title always says something along the lines of it sounding good and they sound like the sped ed orchestra 🎺🎺🎺🎺

[@randymelissabutton2159]

Nice to see some v6 love....

[@In_memory_of_Dad]

John Ross i am loving the Camaro dude, I hope you decide to keep it as it is so Watch J.R Go man...Can't wait to see what the channel has coming up next? I wish you guys could put something out every day!

[@ricklosangeles5043]

I constantly find it amazing what JR can do with one hand.

[@jjnky127]

I have an '18 Camaro RS V6 and I put on a MRT exhaust(muffler delete)...VERY LOUD. My neighbors hate when I leave for work at 4:30am. I also installed a K&N Cold Air Intake. The car is able to breath and it lowered my 0-60 times. Stock Chevy says 5.1 (on a prepped track I assume), the fastest I ever had was 5.3 on the road. After the intake I was able to get it down to 5.0.

[@justinschwartz6571]

My RS had the gages from factory, as did most of the cars I looked at when buying. Never noticed they didn’t all have it.

[@drost582]

I love his shop! Is it always that clean, I would take my cars there based on cleanliness alone! Great videos.

[@grahameparkhouse8085]

BEST EPISODE SO FAR !

[@vertdog123]

If you and a air intake it will sound even better just install into my camaro yesterday

[@Kaldryf]

Finally a return to the cheap car repairs!! These bargain finds and repairs are a lot of fun!

[@SIXPACFISH]

Damn, Ninja ain't sick of you yet? Johnny is a great guy.