Water cooled Sport gets a beadlock, reached 20,200 rpms!

[@StroDshiesty1]

This video is very helpful im just now building my hardtire ped

[@danielgriefnow4297]

Drill a 1-2mm hole in the throttle plate with will lean out your idle and let you open the idle jet a bit to help get over the lean mid range.

[@lorriecarrel9962]

That motor is bad ass bro

[@aaronpratt89]

Thanks man!

[@briang4470]

If down low throttle response is what your looking for try a walbro wt 813. They are a bit pricey but they have a accelerator pump that gives a shot of fuel on tip in which really helps or you can try one of the barrel type carbs they seem to have really good throttle response.

[@aaronpratt89]

That is a option that I was looking at

[@Tommysmess]

Lemoncello is very good 👍

[@dawsonmacie6984]

Ive gotten 56 57 kmh. With a .800 spindle. Still fun to ride in the bottom

[@aaronpratt89]

I’m trying to keep my spindle size small. I don’t want to go over .750 yet lol

[@dawsonmacie6984]

@@aaronpratt89 i feel ya 👍

[@jackallred8228]

I’m on of the seven man! Love the peds. Just got my first real goped Bigfoot. Been watching videos on em for years and got a chinesium ped for Christmas last year. My dad bought a sport off Craigslist for 50 bucks then sold it cause he was too big for it. I only rid it once and it’s been a dream to have my own scooter that I purchased my self. I’ll get a video of mine soon!!!!!! I wouldn’t mind a subscribe tho. Lol

[@aaronpratt89]

Hell yea man!! I’ve been on a Goped for about 20 years now! I’m editing another video right now! Stay safe out there!

[@jackallred8228]

@@aaronpratt89 you too man I’m always waiting for your videos to come out once I’ve found your goldmine of a channel

[@aaronpratt89]

That’s awesome dude!! Wait until you see what I am editing now!! It’s tough trying to make decent videos, I’m not the best on electronics. Plus my computer is a potato lol.

[@Eduardo_Espinoza]

Awesome

[@nicholasemmert307]

I don’t have a goped, but I do have a marine zenoah boat and a couple rc bajas that I tinker with! Where are you based?

[@aaronpratt89]

Nashville Tennessee.

[@domonichoffman2426]

Put a 750 or 800 possibly a 850 900 spindle on it for shits and giggles. Also when I raced gopeds I had a core spindle so I diddnt have to change tires that often and it eliminates slip. And I love the OG ADA S1 pipe.

[@aaronpratt89]

Man those apple cores are a pice of history now!! I can barely fit a new tire on there with the .700 lol once this tire wears some I’ll play with some spindles. However I’m still fighting to get my goal of 35mph with a .700 or smaller. The ADA S1 by far is the best small bore pipe out there. I’m wanting to buy the DDM racing dominator pipe and make it a center bleed. Possibly cut it up and re shape it similar to the S1 and see if it will increase its current performance. Thanks for the interest! I love hearing from old Goped heads!!

[@domonichoffman2426]

@@aaronpratt89 I also have a super rare 1050 spindle

[@aaronpratt89]

@@domonichoffman2426 were you running that on a hard tire? Lol I can imagine that on a big foot

[@domonichoffman2426]

@@aaronpratt89 I ran it on my xped and my bigfoot

[@domonichoffman2426]

@@aaronpratt89 also try a ada big bore juice box that might help you in your quest for your speed goal

[@dawsonmacie6984]

Hey thanks for the video. Can I ask your opinion. I haven't done much testing yet back and forth with spindle sizes but i find anything higher then .800 it just doesn't run good. Im in a quest for top speed to. I may try the quickdraw deep v pipe. Thanks for your content

[@aaronpratt89]

Tire pressure has a lot to do with top speed. With larger spindles you actually want less tire pressure against the spindle. The pipes I’ve had the best results with are Ada series 1 and flow systems.

[@dawsonmacie6984]

@@aaronpratt89 right on man. Yep i have a hard tire ped too. The compact look is so sweet. Never got into the bigger ones. Can i ask where you got your tachometer

[@aaronpratt89]

@@dawsonmacie6984 I ordered it off Amazon lol

[@thomasd2695]

My uberscoot evo 2x 50cc did 30 stock on flat land, then i swapped a 63cc engine in and its way faster. Seems like a waste of money for minimal performance. My new engine 63cc 1E48F cost $170 shipped from China.

[@AlexSilva-dq9ok]

You sell this thing

[@aaronpratt89]

No, i collect goped brand scooters. Some stock, some are not, some are wating to no longer be stock :)

[@Taboloncawonthemasters]

Still holding on to them??