Water lines for molds & diagrams you can make. I show you some samples of water diagrams you can make yourself. This will help when you have new people in training when setting molds into the press. Please Like, Share, & Subscribe
Пікірлер: 32
@TheSparks765 Жыл бұрын
wow my man everything in that shop loooks so clean and organised man great job
@injectionmoldingskillsmore1064 Жыл бұрын
Thanks for watching & the support to the channel greatly appreciated.
@jeremymcclanahan23892 жыл бұрын
Now....we run products that are larger than most, but one issue we have is turbulent flow through a "flood channel" type cooling system. If the water flows too fast it actually degrades it's ability to remove heat from the tool. We were able to experiment with digital flow meters and fittings to choke down on the return side of the circuit and improve cooling. Love the vids...thx
@injectionmoldingskillsmore10642 жыл бұрын
Cool bud, thanks for the support to the channel & giving some of your experiences
@straighteningmachine Жыл бұрын
Great video for teaching!
@injectionmoldingskillsmore1064 Жыл бұрын
Thanks for the support to the channel.
@paigebates4451 Жыл бұрын
I work for a injection molding plant and we have 2 molds that are 8 cavity sump pump floats and they both have 128 water line connections! I would absolutely love to see my company put those watering systems on the tools themselves! Those float molds are the only 2 tools that I absolutely hate pulling or setting lol
@injectionmoldingskillsmore1064 Жыл бұрын
Thanks for watching & the support to the channel greatly appreciated.
@IIIDAZZLERIII2 жыл бұрын
Handy tip... if your finding that the female dme water fittings are swivelling during opening/closing or on sliding cores and using up seals then switch to Staubli fittings 👌👌
@injectionmoldingskillsmore10642 жыл бұрын
Thanks for the info & also for the support to the channel.
@Re_DEEMD Жыл бұрын
Evening Dave! I recently, in the last month or so found your channel. Great content by the way, but what are the odds that no more than 3 weeks after finding you I find myself looking over your resume to prep for an interview/walk around of my home facility. This is Nick from Crestview. I was the one that got interrupted during the walk around for a water leak on the tool water of one of the Sumi CL7000. I wish I had gotten to sit in on the interview and talk more during the tour as originally planned. Hope you're given an offer you would be happy to accept. Take care.
@injectionmoldingskillsmore1064 Жыл бұрын
Thanks so much for watching & the time. i hope things work out for me too I think we as a team can make the company a world class molding plant. It was nice to meet everyone there.
@injectionmoldingskillsmore1064 Жыл бұрын
I am move on to Southwire, I accepted the offer bud. See you soon
@mikefishes6232 Жыл бұрын
I really like how clean you guys keep that shop.. where are you guys located?
@injectionmoldingskillsmore1064 Жыл бұрын
Safariland in Jacksonville Florida. Thanks for the support to the channel 🙏🏻
@mikeyellen3622 жыл бұрын
4:43 jiffy plug seals is what I call them lol
@injectionmoldingskillsmore10642 жыл бұрын
Great info
@joshbowen271729 күн бұрын
Hey Dave, I'm doing blow molding and have a tool which I have turned the water almost all the way down on and yet I'm still getting condensation inside the mold causing an unwanted texture on the part. It's hot and humid here in VA and I'm battling condensation on all of our tools (injection tools as well) causing rust issues and a giant mess on the floor. Do you have any recommendation on how to cut down on condensation in molding?
@injectionmoldingskillsmore106429 күн бұрын
The condensation problem is an issue that I have had for years & there is no way to prevent it other than Climent control on the plant. I have tried several things for insulator boards and insulators for all the water lines. Cutting the water back or chocking it in half will make the molds run hotter. This did help me on some jobs, but you have to watch for the parts getting too hot and warping. There is NO right answer on this issue it is something a lot of companies fight with. Thanks for watching & the support to the channel I greatly appreciate it. I hope I was able to help in some way.
@joshbowen271729 күн бұрын
@@injectionmoldingskillsmore1064 Thanks man, I appreciate your time. I just hope winter gets here soon lol.
@injectionmoldingskillsmore106429 күн бұрын
LOL, I hear you & thanks for following my channel.
@devanandkondajuturu99262 жыл бұрын
Hi there good evening sir
@injectionmoldingskillsmore10642 жыл бұрын
hi
@blood4mon3y55 Жыл бұрын
I have a question. We are starting to get a lot of molds that vapor lock whenever we turn the tcu on. Some of our molds have a water manifold and can supply up to 8 or 10 cooling channels. If there are more than what the manifold has we will jump whatever is left trying to make sure its even flow. Our system pressure going to the tcu is 40psi and the tcu will provide 80psi. Our main line from the tcu to mold manifold is 1" and manifold to cooling channels are 3/8 id or 1/2 id. Some of our molds that come in will have clear lines so that is how we first started noticing air in the lines whenever the tcu's were on. You can slowly pop the fitting off and relieve the pressure which would help water to begin flowing. What are we doing wrong? Im noticing this on our larger molds that go in our 500 ton press up to 1500 ton press). We were thinking maybe our tcu's are to small for the larger size molds. They are 3hp. We use those from our 40 ton presses all the way up to our 1500 tons. We also use 1 tcu per side. Thanks
@injectionmoldingskillsmore1064 Жыл бұрын
Thanks for watching & the support to the channel greatly appreciated.
@claudiaalcala7616 Жыл бұрын
How can you easy take out rust from inside the mold that is clogging up a water line without disassemble a mold?
@h7qvi Жыл бұрын
Feed warm evaporust through for a day or two
@injectionmoldingskillsmore1064 Жыл бұрын
Thanks for watching & the support to the channel greatly appreciated.
@joshbowen271729 күн бұрын
Also be sure to always blow water lines out after pulling the mold from the machine to prevent corrosion build up.
@CompExterxnl8 ай бұрын
I have yet to understand how the hell jumping a mold works.
@injectionmoldingskillsmore10648 ай бұрын
LOL, Thanks for watching & the support to the channel I greatly appreciate it.