Water housing leak Discovery TDV6

[@IanFell-v5k]

Thanks for making this video It saved me getting ripped off by the garage and is easy to do

[@leighmason1853]

Thanks champion for this, i'm replacing mine with an alloy one. I can only say that Clamp Pliers are a must. I did.... battle.....alot :)

[@Arks123]

Thanks, mate, I followed it with no previous knowledge; this is KZbin gold 👍

[@morrungulobay7785]

Great video thank you. Job done, however I had a leak. I would strongly suggest that the elbow connector that fits onto the front of the water housing manifold is replaced at the same time. The o-ring on this elbow connector gets a tad flat and will leak...eventually 😅. Do it while you're in there and you won't have to do the job twice like me!

[@dlandy241]

I agree. Sometimes, the o ring on the oil cooler needs replacement. We'll done

[@braampretorius1707]

Thank you for the video. I followed it step by step and got the part out no problem. New unit is R1050 from Land Rover.

[@steve495000]

Such a good resource. Saved me a lot of time. Thank you!

[@craigjohnston2488]

Great video thanks for the effort it is appreciated. Purchased the tools as recommended making it easy.

[@modut6258]

Thanks! Did you need to bleed the coolant system afterwards?

[@danpocol6736]

Hi.did you drain the entire cooling system before?I have the same problem.thanks

[@valerioanastasia2891]

Ho fatto esattamente come nel tuo video ho risparmiato 600 euro per un pezzo costato originale 40. Grazie infinite…

[@TranscriptUK1]

Why do you need to remove the coolant tank? Does it need to be removed to do this repair ?

[@dlandy241]

Hi sorry for late response. I removed it for 2 reasons. 1. So I don't get more coolant leaked into valley of engine to confirm repair. 2. His vehicle was showing low coolant even while coolant bottle was filled so I replaced his coolant bottle. Hope that answers your questions

[@martinkulik9466]

Was it leaking? Could you see leak there before removal? Can't diagnose where leak is coming from if radiator or this. Any way to see it before removal ?

[@michaelwhittaker718]

Hi we have the same problem, we have got the part LR073372 but it didn't come with the o ring for the oil cooler. Do you know the part no. for this?

[@dlandy241]

Lr013151 hi 👋

[@attehamalainen9277]

Hey! How can you see, if that is the leaking spot? Thank you.

[@franlrd8177]

Thank You crack!

[@Colin.Makala]

Soooo, can help out fix my problem on the same vehicle?

[@dereckprowling7245]

Excellent

[@tiaandouglas8998]

Hi There, i think I might have a similar problem. Car is not getting warm but it is loosing water and seems like its coming from the same place. Is it an expensive fix?

[@dlandy241]

Hi no its not expensive at all. And very good to do as preventive maintenance even if it's not leaking

[@DJHamzaOfficial]

@@dlandy241i have just been quoted £550 to replace my water housing on my vauxhall vivaro van, i think thats pretty expensive🥲