Water Leaking Through Ceiling Repair (Chilled Water Pipes Demolition/Install/Repair) Pumbing Fails

[@craig1523]

Nice work!! Been through the same thing in a hotel with the condensed water lines. Not a fun, or clean job. Especially with all the years of sludge build up and sediment in the systems. Great work!

[@JumpermanTech]

Thank you! Def not so fun and a dirty job. These pipes were gross lol I appreciate the feedback Craig! Stay safe out there and stay tuned for new videos!🔧

[@arifansari5323]

please make more videos on chiller & ahu maintenance ( monthly ppm, quaterly ppm, yearly ppm). thanks alot

[@JumpermanTech]

I definitely will! Stay safe out there & stay tuned for new videos every week!

[@Toebex]

My man is there anything you can't do? Super impressive, great work.

[@izzybell11]

JMT interesting and well explained in great details problem solving video. Excellent job.

[@JumpermanTech]

Thank you very much! I appreciate your response. It wasn't so easy and it was a dirty one. Luckily its all done with for now🙂 Until the next leak lol Stay safe out there and stay tuned for new videos!🔧

[@jbaker8871]

Great job! You do great work and videos help many new comers. I might add you should grease grooved pipe gaskets and debur the pipe. Grease inside the couplings. The gasket needs to slide in the couplings. If it pinches it leaks. Pretty forgiving product tho. May you prosper in all your work. Great work ethics!!

[@JumpermanTech]

Thank you so much J! Really appreciate this comment🙏 I am thankful for you watching, expressing your opinion & advice. Thats great advice, it only makes sense. Thank you again & thanks for watching🙂Stay safe out there & stay tuned for new videos every week🔧

[@samuelaranda4597]

Great work attention to detail

[@JumpermanTech]

Thank you Samuel! Appreciate your support🙏 Thank you for noticing🙂 Attention to detail is so important. One of the best skills to have in my opinion and that goes for everything. Thanks for watching! Stay safe out there & stay tuned for new videos every week🔧

[@ranchoelguero8252]

Where did you buy those new pipes and fittings?

[@ranchoelguero8252]

How does air come out of the system after a repair like that?

[@billm6171]

Another great video, enjoyed it very much thank you

[@nicolerennie]

wow😱 thank you for sharing, tough work but you make it look easy🌟

[@JumpermanTech]

Thank you! It was dirty & gross but its done & the people have air conditioning😎 I appreciate the response! Stay safe out there and stay tuned for new videos!🔧

[@samuelaranda4597]

Great work attention to the details is important

[@JumpermanTech]

2 comments in 1 video haha I did respond to the other comment. Thanks again!

[@kennyw7453]

I never did a lot of Victaulic piping but I used have Duck Butter (pipe joint lube) which made it a lot easier putting the couplings together. Great job as usual.

[@JumpermanTech]

Thank you Kenny! Duck butter 😂 Def makes the job easier👍 Thankful for the feedback & thanks for watching! Stay safe out there & stay tuned for new videos every week🔧

[@thanktheknife]

Sick vid, what's the process with purging that air out when you let the water through? Is it auto or did you have a bleed somewhere?

[@kennethlobo4420]

Great video! Don't u think u need to add some lubricant for the rubber coupling u need on the pipe?

[@adejohnston6831]

I don't see that many VJ joints here in the uk but they are around, mostly screwed black iron pipe in those situations, and in the last 10 years most jobs are going crimp. What was actually leaking the rubber gaskets ?

[@JumpermanTech]

I hear you with that. Interesting to know. Hello from the US! That's true, so many crimp connections. That thing is cool but I never used it. Very expensive at the moment between the tool and fittings. I still solder & braze all my water/refrigerant piping. It was actually the pipe itself which leaked! There was a pinhole at the end of the pipe itself which caused water to drip from the ceiling. I appreciate the feedback & you watching. Stay safe out there & stay tuned for new videos!

[@tarunm4534]

Used to work on big boilers and missed oldy days. After using hole saw how about using the file to debur the edges. Regarding hole saw usage the I use to put few drops of soapy water just to take out the heat and save the tooth of hole saw. I used vitolic fitting on a condensate pipe under the floor on a steam system boiler. I was wondering where exactly was the leak on the pipe also I think it was easy to slide couple of pieces of insulation onto the pipe if possible while sliding the pipes into the ceiling.

[@milesharry8549]

Good work

[@JumpermanTech]

Thank you Miles! Your feedback is very much appreciated🙏 Stay safe out there and stay tuned for new videos!🔧

[@alexeytech1495]

Great repair job. Good material to know.

[@JumpermanTech]

Defiantly great to know! Thanks for watching🙂Stay safe out there & stay tuned for new videos!

[@MariMuthu-ck5ih]

Merry Christmas

[@JumpermanTech]

Merry Christmas to you & your family! Thank you for watching & I appreciate the message🙏Stay safe out there and stay tuned for new videos!🔧

[@joep1818]

Nice work 🔥🔥🔥🔥

[@JumpermanTech]

Thank you Joe!! Glad you think the work is🔥🔥🔥 Hope all is well 🙏 Good to see you in the comment section🙂Stay safe out there and stay tuned for new videos!🔧

[@arifansari5323]

great job but tough work

[@JumpermanTech]

Thank you very much🙏 Definitely not easy work. Body was sore after doing this work. Thank you for the comments. Stay safe out there & stay tuned for new videos!

[@syedbasheer8210]

Great job..

[@JumpermanTech]

Thank you very much Syed Basheer! Always good to see you in the comment section. I appreciate your input🙏 Stay safe out there and stay tuned for new videos!🔧

[@jrh86]

Amazing know how 💯💯💯

[@تعلممهنة-ح1ق]

Good job 👌👍

[@JumpermanTech]

Thank you very much for your feedback! 👌👍 Very much appreciated. Stay safe out there and stay tuned for new videos!🔧

[@تعلممهنة-ح1ق]

@@JumpermanTech Good luck to you, man

[@JumpermanTech]

@@تعلممهنة-ح1ق You too🙏🙏🙏

[@fitter5423]

Not bad. Just alittle FYI for future reference, victaulic requires grease on those couplings and mechanical tees. Luckily you didn’t have a leak. I work with grooved pipe damn near everyday as a sprinklerfitter doing service.

[@JumpermanTech]

Thank you man, I appreciate that. That grease is important. Thats tough work right there man. Appreciate your service🇺🇸 Stay safe out there and stay tuned for new videos!🔧

[@fitter5423]

Will do. Keep up the good work doing the job right the first time.

[@JumpermanTech]

@@fitter5423 👍💪✌

[@acechoice45]

Great job lol

[@solosmith236]

Those are some nasty looking pipes. 😱😱

[@JumpermanTech]

Haha they really are!🤢🤢🤢 Thank you for watching & I appreciate the feedback🙏 Stay safe out there & stay tuned for new videos!

[@67tr876]

That's really bad. You know how this is going to end up right haha chasing leaks !

[@JumpermanTech]

Dude forreal! Gross rotten black steel pipes🤢 The copper is doing just fine. They need to replace this piping and not just a section lol chasing leaks for sure! Happens every year🤦‍♂️ Stay safe out there and stay tuned for new videos!🔧

[@67tr876]

@@JumpermanTech Tell me about it ! Back when I worked as a helper in the field we did a building on 5th Avenue in the 80s and let me tell you SCARY ! the chilled water riser were still from the 1960s ! That was a scary job because we had to install new fan coil units and tie in to the old riser.

[@CoolerQ]

Man, feels like you're putting lipstick on a pig. The rest of the pipes look just as bad... I foresee lots of future business from this hotel! Lol

[@JumpermanTech]

Lipstick on a pig🤣🤣🤣 I hear you on that one! More pipes burst last week💀 We keep recommending to replace all the pipes with copper like the pipes leading into the hotel room fan coil units but hey, not my decision unfortunately🤷‍♂️ Lots of business for sure. Happens every year haha Thanks for watching! Stay safe out there & stay tuned for new videos every week🔧

[@paintball130]

damn... thats some crusty pipe

[@Kevin-wj4ed]

Re pipe the building

[@kennethoakley-x2d]

Nice job