Water System Overview - JP Combi - CAK Tanks - Shurflo - Citroen Relay L4H2 Campervan Conversion

[@jh2536]

Love all of your updates and the van is looking great. Particularly the shower and pvc cladding. Post some more updates!!!

[@denisecafferky2248]

You're doing a lovely neat job

[@CasLaz]

Thank you! 😊

[@Martin37vg]

Just been watching your water insyall video. I am thinking of exchanging the gas truma for the diesel version . We eat gas in the winter with heating but saying that we would never make enough saving to recover the extra expebsive. I do have other reasons ie gas will last longer and the heat is drier so less condation in the van . How did the pipes under the van proform as I would have routed through ceiling as guess they will never be water free during drain down as they are lowest point plus the clod will effect them also duing winter trips etc.

[@sarahgechie9476]

Hi guys we have been following you start to finish. Missing your videos :) We are still building our own van and your channel has helped so much! Will you be posting any more would love to see your progress :)

[@CasLaz]

Hey Sarah! Hope you conversion is going well, glad to hear our videos helped you out a bit ! Yes we will be positing more updates, just need to find some time to edit. Hopefully we manage to post something this month !

[@astral006]

Was wondering why the water inlet is not outside but you explained it :) can’t wait to see the kitchen in :) love the fact that you hide everything under the step rather than the van. Excellent job as always.

[@CasLaz]

Can't wait to have the kitchen in either! and we should be able to finish the ceiling too now, this has been holding up quiet a few half done jobs! Thanks!!

[@Pagipopo47]

Great video! Where did you get the Truma valves/fittings from? It also seems to me that you have an excessive amount of shut off valves. Can you explain a little bit as to why?

[@kamil.grebenicek]

Did you use at least the anti freeze valve that came with the JP Heater valve kit or is the 25 buck kit completely worthless? Thank you.

[@WanderbusAdventures]

That looks great. The drain valve looks great, i know Truma insist on it but such a neat install. I am going to add one to my iMass now i've seen yours. Great overview.

[@CasLaz]

Drain valve is pretty awesome, I'd say its a must especially in winter so you can drain the tank to prevent damage from freezing! Thanks for watching

[@Sibsbibs]

Just finished watching your great videos. I’m armchair-planning my retirement conversion, still 3 years away alas and have watched a lot of videos. Yours really are up there with the best and most informative I’ve seen - thanks so much. Can I ask about the length of your bench seats and shower? It’s exactly the layout I’m planning as I need to have room at the front for a bench seat for my daughter - it would be good to know how you’ve divided up the space. Thanks!

[@russho67]

Hi hope this message finds you well. I did some research into the Truma JG connections. Truma say to use them in thier instructions, but when you check JG site and specs on the JG connectionss, they should nt be used with Stianless steel pipes, which both Truma and JP use!! Found this out about a week ago, after having fitted a few months ago!! I have these still on my JP Combi for now and havent popped off yet, will keeping an eye on them . Clips crossed my mind to add and see you have done the same now so will add sooner than later! I also going to fit a Termostatic valve to control temp better when showering and lag hot water pipe to maintain heat better. As i pause the shower between soaping and rinsing etc to save water. Brgds Russ

[@CasLaz]

Ah thanks for sharing, it makes sense as the JG fittings need to "bite" or "grab" onto something and it's easier for it to slip from stainless. For us it seems to be working for now with the clips so fingers crossed we wont have issues. Thanks Russ!

[@budnixon]

So seems like you purchased a Truma fittings/pressure valve etc. kit. Could you share what kind of water pump you used? I'm interested in pressure (PSI) that pump puts into the system, as JP advises to use under 0.28Mpa with max of 0.45Mpa. We installed the kit and our pump is 55PSI (which is over the advised PSI), so our pressure valve is seeping water when pump is on. Any advice is appreciated, thanks for the video

[@budnixon]

Never mind, I guess I skipped video too fast to the other parts, you got the 2095 pump :)

[@leebrash3983]

Hi, thanks for the tip on the clips to lock the hot water outlet pipe in place, struggling to find them anywhere though. Do you have a link where they can be bought from please mate?

[@CasLaz]

Hi, there is a link in the description to ebay where I got them from, you can pick from the dropdown list on ebay(locking clips)

[@willscholefield7682]

How is the heater holding up? Still working well? Thanks.

[@CasLaz]

All good! No issues last 2 years ish

[@stevewalker9041]

Hi, great vids, really interested in how you've found the water heater, any issues any good points?

[@CasLaz]

Hi Steve, It's been great so far, no issues at all. It's slightly louder then I expected it to be on the outside of the van (exhaust) I think they made it quieter on the never versions so that shouldn't be an issue anymore. It's not really an issue now unless you wana go super stealth I guess. Also one thing to note on electric mode only its not producing anywhere near as much heat as on diesel. Diesel mode is 4kw heat, electric is 2kw so it makes sense. What we been doing if we are on hookup and its cold is boosting temp quickly on diesel only or diesel+electric mode and then once the van is up to temperature switching to electric only to maintain seems to work well.

[@Alivefrom45]

very nice, your getting there now.

[@CasLaz]

Thanks Matt! Feels good to have the plumbing in !!

[@markbryce437]

Hi looking from the back of your van is the fresh water tank on right and waste on. the left ,mine are a nightmare trying to fit

[@CasLaz]

The fresh is on the right (driver side) and the waste on the left. I found it difficult to put the fresh on the left. I found it difficult to try to fit it the other way around.

[@leelendon1482]

Love the truma copy . How much did it cost guys?. Also if you want a shower or turn on tap for hot water how long does it take to get hot 🔥im guessing it's not instant lol . Great knowledgeable video guys

[@CasLaz]

Hi Lee! Check the unboxing / install video, we go over plenty of details if you want to find out more! Unit cost £1150 with delivery / import tax to UK. It's not instant hot water I think it takes around 20 minutes to heat up the water.

[@leelendon1482]

@@CasLaz wow thanks for the quick reply. Think I'm going to get one guys . Great install video. I have the same layout you have . Instead of putting the heater under the seat area I was going to put in garage but concerned on the fuel pipe length if it was going to be ok . If not I'll go with what you have done under the seat. Thanks Guys

[@md2320]

Certainly making the van lighter with all the holes in the floor 🤣😂. Are you eventually living full time in the van, it's been very well thought out....

[@CasLaz]

Haha every little helps ! 😂 yeah we plan on doing a fairly long road trip around europe! Thanks!

[@md2320]

@@CasLaz I think Cas should have done a water system test in the shower 👍😜🤣😂 like the toilet test when that was installed.

[@rafalkwiatkowski1973]

What scares me is the number of holes drilled in the floor. This will all get rusty. I did mine van without a single hole except sink and shower drainage.

[@md2320]

Any more updates or has the van conversion stalled????

[@CasLaz]

It's coming, need to find time to edit the latest update, sorry for delay!!

[@md2320]

@@CasLaz don't edit it. Just show the real side of van building 😂🤣

[@leelendon1482]

Great build guys . I am doing the same van and almost same layout . Great job and good attention to detail. I'm a marine upholsterer so looking forward to doing my own upholstery in cab ect . Will you be showing athe step build as I'm doing the same thing to work with the front swivel seat . looking at a curved section with underlighting. Once again Great build 👌

[@CasLaz]

Hi Lee, thanks ! Good luck with your conversion :) I haven't recorded much of the step build but it's pretty easy, just couple battens and thin ply on front to cover. Maybe I'll do a little overview in the next video. We decided to go without a curve in the end, too much faff haha.

[@garagefaff]

How noisy is the pump when mounting to the floor? I’d really like to mount mine similar but worried it will vibrate through the floor?

[@CasLaz]

To be honest its quieter then I thought it will be. I think the rubber feet + our floor is not hardwood (vinyl) dampens the sound. Especially once it's covered up under the step I think it'll be even quieter.

[@deea79deiu]

Hi, when will be next episode?

[@CasLaz]

Hi! Hopefully next week!

[@thevtubproject8243]

Hey guys- hows the build coming along now?

[@CasLaz]

We have been taking a break / tidying up small bits and cracking on with the front seat / step area. Will make an update video soon!

[@Rodney_Trotter_Dave]

It’s been 7 months … have you given up with KZbin ??

[@Lion19722]

What roughly is your yearly insurance for a van this size? And how much is the yearly tax. Thanks

[@CasLaz]

I think the tax is £275 and insurance is £410. It's currently insured with brentacre.

[@Lion19722]

@@CasLaz thank you. Love your channel. All the best

[@robhughes4249]

So what happened to your vids? I was enjoying the series, sad if you had to give up the build.

[@CasLaz]

We took a break from filming the build as got too much with working full time jobs too! But we finished it 😁 full van tour coming next week!

[@md2320]

Well you both fell off KZbin. What next???

[@ASRS-Ltd]

Caz had an affair with laz bro.

[@md2320]

@@ASRS-Ltd how do you know????? Hmmmmm