Waterslide Decal: Creating And Applying A True SILVER Decal To A Replacement Telecaster Neck [8/11]

[@74dartman13]

That looks incredible! Fantastic job...nicest I've seen!

[@gugarl]

Thank you very much for your comment. Best regards.

[@gugarl]

I posted another video showing the technique: kzbin.info/www/bejne/a3usaaSkndV4gcU

[@74dartman13]

Gustavo Rocha Leite best regards to you to!

[@craigusselman546]

Stunning just beautiful love the 1950S style spaghetti logo.

[@denboe2894]

Ahhhhh. All the fun in Fender Squier guitars. The soundtracks aren't bad either. Kudos y'all.

[@gugarl]

Thanks!

[@m.b.g.musicproduction9658]

Loved the way you called the guitar a Broadcaster! That will get people talking!

[@gugarl]

Thanks!

[@BassicVIC]

Fender has a model called Broadcaster. Look it up.

[@MikeLaRock88]

0:45 So satisfying you caught that

[@guillermodelnoche]

Love the background music. Sweet Fender tone for days!

[@gugarl]

I love them too!

[@Guttalaser]

Hi... fantastic job man! BUT... one thing i don't understand: from the video seems that you print a reversed version of the logo and then apply the metal color... ant this because this way you get the black oulines around the metal color. OK... BUT... the adesive part of the decal - for what i know - is on the back of the decal where is the white paper... so... how the whole thing works?

[@laboratoryrack6488]

Thanks for the video, and great tip on the Nankin.

[@luisbeltran7422]

How can the decal stick to the wood if it has beed sealed with acrylic spray? Some people slide the paper part from UNDER de decal, some slide it off from the top with inverted image. Confusing.

[@aliga621]

You could tell me what material you use, that I don't identify the aerosols you use.

[@1Dcorace]

That is absolutely beautiful. Nice job.

[@gugarl]

Thank you very much for your kind comment!

[@BaritoneOneFive]

Perfect amount of grit in the background guitar!

[@gugarl]

Thanks

[@ScheltemaBoutiqueGuitars]

Is lack of adhesion not an issue?

[@gugarl]

Even on the opposite side, the decal adheres well. In fact, I haven't noticed any difference in adhesion between the two sides.

[@ScheltemaBoutiqueGuitars]

@gugarl I appreciate your help

[@nameynameusername]

How did you get rid of the clear decal/bump/outline? Did you sand the edges down flat before the clear coat?

[@gugarl]

No. You have to apply some clear coats and sand between the coats until you get the desired results.

[@BassicVIC]

Yes. The video is not clear about the right steps. He’s not showing the whole process so it’s confusing and frustrating. I’ve also asked him about the products he uses (??) No reply.

[@val.entino4910]

for the 1200 grit sanding, did you start sanding after letting the decal dry or did you put clear coats beforehand? thanks in advance

[@tiagos.fagundes5999]

Oi Gustavo, acha que eu consigo dar acabamento em um waterslide usando somente Tru-oil e wax? Poderia me dar alguma sugestão da ordem de lixas nesse caso? Devo aplicar o decalque antes ou depois das primeiras camadas? Obrigado desde já, ficou incrível seu trabalho!

[@gugarl]

Obrigado. Nunca testei tru-oil direto no decalque. Testa antes em um pedaço de madeira. Avisa se deu certo! Abraços.

[@gershomtam1096]

Hi just wanted to ask a clarifying question... at around 1:55 it says apply some clear coats to the decal before this step? Which side, and may I ask what the purpose is?

[@WonkeyWabbit]

You apply it to what would otherwise be the top of the decal i.e. the side facing you that you've painted the silver on. The other side is still stuck to the backing paper at this time, and spraying the rear of the backing paper would have no benefit. The clear coat helps stick the ink to the decal sheet itself, and if the ink is water-based, it's a very necessary step to stop the ink coming off when you soak the decal. Otherwise, it provides some rigidity to the decal so that it doesn't crinkle at all and stays flat when you slide the backing paper off. If the decal paper crinkles, apart from often being awkward to un-crinkle, there is also the risk that the silver ink might crack and create a visible line. So a couple of coats of clear (even one coat will do) keeps the decal almost rigid and prevents this happening. Not all decal papers are equal. Some are thinner than others and the thin ones do crinkle very easily indeed. They are also the better ones to use as they are more invisible than the thicker papers under the clear coat. The overall height of the decal may now be more by the time you've added a couple of layers of clearcoat on the back, so you don't save on the amount of clear you need to cover and level up with the decal itself, but the thickness of the decal paper itself still remains the same, which is the important bit.

[@gugarl]

Thanks, Simon.

[@matthewstigall8337]

Thank you for posting this video!

[@gugarl]

Thanks you for watching.

[@shannonclary4921]

i am going to try this. I already sanded my headstock on a strat and tele and clear coated. I have ink and slide paper. Where can I get headstock logo or vector art? Thank for the help. Awesome DIY vid

[@danievanwyk6379]

Excellent job !!

[@gugarl]

Thank you very much!

[@martinwiltrout9601]

Use the wet waterslide paper to rub out the air bubbles first. This will make a tighter bond. Cool background jam.

[@gugarl]

Thanks for the tip! Best regards.

[@Dubz1dnb]

That was a nice sticker job man!

[@gugarl]

Thank you!

[@marcelopivotto3818]

Iai meu irmão me responde uma pergunta se possível ... Cara tô por botar o decal na minha tele fazer o processo todo, mas para finalizar oque me diz pensei em criar uma película dura com a própria superbomder , será que enrugaria ? Ou passaria legal? Fiz muito de serviços no headstock de envernizar com super Bonder aí depois lixar e polir fica legal... Mais duradorou que verniz .... Acha que a super Bonder passa legal encima deste adesivo , espelhando com uma esponja e esperar secar e lixar para emparelhar ?

[@gugarl]

Faz um teste antes em alguma madeira velha.

[@inyourbusiness73]

was that a tung oil being used towards the end? what kind of clear coat was it cellulose?

[@caivsivlivs]

how does it work the same since you printed it inverse?

[@leonardocolissi8161]

Porque você aplica óleo de peroba antes do lixamento? É obrigatório esse processo? Quais os benefícios?

[@gugarl]

Com a lixa d'água pode aplicar com água, não precisa ser óleo. Água é até mais fácil, pois não precisa limpar bem para tirar o óleo antes de aplicar a próxima camada de verniz.

[@ta.entmoney3405]

What did you use for clear coat

[@wildbillhackett]

I've done this twice now with two Teles, and this is just how I did it except I used steel 000-wool and a small roller to get all the air bubbles out from under the decal. By the way, if anyone is finishing a fender neck, Zinsser Bulls Eye Amber Shellac works really well for the old 50's tint. Helps to thin it a smidge to make it just a tad less reddish, but it's not bad just using it as is.

[@gugarl]

Hi, Bill. Thanks for the tips. Best regards.

[@BourneAccident]

Using that Zinsser Bulls Eye Amber Shellac is exactly what I did to preserve the decals on my Fenders about 40 years ago. It darkened quite a bit over time. I still have the guitars and they look awesome.

[@gugarl]

Hey, thanks for the info. How did you apply it?

[@berntedvinsson5397]

very nicely done!

[@gugarl]

Thanks, Bernt!

[@leonardocolissi8161]

Brother o que eu passo na Madeira para ela ficar com esse tom amarelo, vou fazer no meu baixo porém o Maple depois de lixado fica bem branquinho e o baixo é vintage

[@gugarl]

Você tem a opção de tingir antes e depois passar o verniz (teste antes pra verificar se vai ficar como quer). O tru-oil já dá um acabamento amarelado vintage também. Ou usar algum verniz com essa cor amarelada, como este: www.stewmac.com/Materials_and_Supplies/Finishing_Supplies/Finishes_and_Solvents/ColorTone_Tinted_Aerosol_Guitar_Lacquer.html

[@Elektrifekt]

What a fantastic tutorial! How to you print the water slide outline? I have an old 80’s ESP The Junior and am restoring it for my son. The headstock is in great shape but could do with fresh paint. My son desperately wants a new ESP but I can’t afford that and want to surprise him with the ESP I picked up second hand.

[@gugarl]

That's great to hear! Thanks. I printed in a Laser Jet HP printer. You need to use the waterslide paper according to the printer you're going to use. Laser or Ink. best regards.

[@s.stefano]

Oi. Qual é o spray que vc usou? Não consegui ler que produto é esse. Obrigado

[@gugarl]

Colorgin verniz uso geral.

[@Paul_Davies77]

Wow, fantastic job Gustavo. With the help of your videos I shall soon be assembling my Tele. If I could have some advice please, my neck came with a satin finish all over instead of just the rear like on my American Std Strat. Was wondering if I purchase polyurethane satin spray, do you know if it would end up being shiny after the sanding process as I don't want the finish to be different to the fretboard. Thank you

[@gugarl]

Thank you, Paul. That's great to hear. Yes, you can make it shiny, but it is a time consuming process, painting and sanding. Best regards.

[@robertscott3399]

Yep done that about 4 yrars ago mirror the image. Prob woth water slide drcals is the adhesive is between the decal layer and the paper ithe adhesive is a corn starch based adhesive. Thats why water releclves the film from the paper.

[@RazvanCosti]

all the items used here easily accessible online or at your local stores. (not...)

[@rodrigomelendezmiranda2083]

Hola amigo.... excelente trabajo. ¿Qué papel usas? Eso no me queda claro..... Gracias

[@gugarl]

Waterslide decal paper

[@gabrielfelixrr]

This might seem like a stupid question, but why do you sand the headstock after applying the decal? I tried to understand it on my own but couldn't...

[@CzarZamorak]

To get rid of the outline of plastic from the decal

[@gugarl]

Olá, Gabriel. O local do decalque fica um pouco elevado. Tem que ter cuidado para lixar somente o verniz e não pegar no decalque, até que as camadas fiquem uniformes.

[@alexmitrut341]

How did you do it that there was like,just the pure logo,without the transparent paper.. I mean,when you applied the logo,there was some transparent paper...at the end it was just the logo itself

[@gugarl]

The logo was printed and painted in the face of the waterslide decal that is transparent.

[@Thirdgen83]

Nice Tele tones...

[@Jackson1959.]

Same can be done with sticker decal headstock logo?

[@gugarl]

I think yes. But sticker is thicker.

[@fenderbender3664]

Great Tune! What are those products you used? You did not cover the neck surface preparation for the decal?

[@gugarl]

Thanks. Between clear coats, I used an oil to sand, but better to use water. The neck was already finished before decal application.

[@voodookook]

Dean Green Can TruOil be used for the same results?

[@Joaoluviz]

Incrivel Gustavo, uma duvida, depois de aplicar o waterslide, vc envernizou e depois deu o acabamento com o oleo e a lixa? ou voce lixou o head com o logo ja aplicado sem verniz antes de envernizar?

[@gugarl]

Obrigado, João. Tem que aplicar algumas camadas de verniz após a aplicação do decal. Lixa depois que secar bem. Para lixar, recomendo usar água com umas gotinhas de detergente ao invés de óleo.

[@FushaStrat]

Thanks. I enjoyed your video and the laid back guitar tracks. Is that you picking backing tracks and all? If so, very tasty, and if it isn't you, good taste in music anyway. I'm so shaky I could never paint the silver. My decal would look like a Salvador Dali decal.

[@gugarl]

Thanks! No, you can get info about the songs on video description! Best regards!

[@neoxtra2461]

What is the clear coat called?

[@57ffjjimenez]

Entiendo que hay que barnizar el decal antes de colocarlo en su sitio y luego lijar igualar y pulir, gracias

[@gugarl]

Barnizar el decal antes de aplicarlo. Barnizar el headstock con el decal después de aplicarlo. Lijar, barnizar, lijar, barnizar ... hasta que esté bien.

[@MrScorpionscar]

Is there any problem with the nitrocellulose's solventes applied directly over the decal?

[@gugarl]

After the decal application, you must apply some clear coats to protect and hold it.

[@MrScorpionscar]

@@gugarl Yes, but I mean if the solvents of the clear coats affects the ink of the decal because nitrocellulose tends to melt the underneath coats

[@gugarl]

I don't know about nitro directly on decals. I usually apply a clear coat for craftwork on the decal.

[@markwilding5329]

probably be ok.... Fender apply it over decals

[@psslg2467]

Excelente vídeo. Tenho um P-Bass e queria restaurar o braço dele (isso inclui colocar um Decal novo). Na hora de lixar o decal, não tem perigo de riscar a tinta ?

[@gugarl]

Olá, Pedro. Só lixa após aplicar entre 3-5 camads de verniz e esperar secar. Ainda, a lixa usada tem a gramatura muito fina, 1200. Só danifica a pintura se você lixar muito, passar as camadas de verniz, mas antes pegaria no decal. Abraços.

[@psslg2467]

@@gugarl aaah, então depois de aplicar o decal, tem q passar o verniz pra depois lixar ?

[@andyyoung9510]

Great tutorial, but what happened to you hands... they looked so pretty in the first part of the video!! ;)

[@gugarl]

Haha my wife hands

[@red4life848]

🤣🤣 Class.

[@jaimealexisortizgutierrez9752]

Excelente, me diga uma coisa antes de colocar o decal voce preparou a superficie do headstock lixando ou simplesmente colocou encima do verniz? se entendi bem voce passar uma buffada de verniz no decal e deixa secar antes de colocar na agua correto?

[@gugarl]

Coloquei direto, mas pode dar uma lixada antes com lixa fina para o verniz pegar melhor.

[@h416213]

amigão vc deu um um gloss com o verniz antes da primeira lixa depois que colocou o whaterslide?

[@gugarl]

Sim, entre 3-5 camadas e esperar secar bem antes da lixa.

[@LanceisLawson]

Not everyone has the artistic talent to apply ink that concisely.

[@gugarl]

Yes, I agree. But not that impossible. You can train for that. I asked my wife for this job.

[@wretchedwoman]

Where do you buy the Nankin Ink?

[@gugarl]

www.mercadolivre.com.br

[@LightTouchWoodstock]

Hello again. I need a 1952 Telecaster decal water slide. Do you sell these?

[@SHASHARE]

EBay have it

[@a1s1pinky]

Ciao! What’s that clear spray? Lacquer, Polyurethane or Acrylic?

[@yaye606]

What is that purple liquid you apply on the headstock?

[@gugarl]

I used peroba's oil. But it is better to use water with a couple of detergent drops. Oil is harder to clean before the next coat.

[@vadeiltonsilva5272]

como está indo a minha Telecaster

[@gugarl]

Prontinha!

[@mattmartinez7135]

Before sanding down each coat did you need to let each one dry?

[@gugarl]

Yes, about 24 hours.

[@oldschoolbluesplayer5319]

* * * you can get Fender Decals that look just like a factory one on but you have to watch out for the "cheap ones"...

[@gugarl]

Yes, many available out there.

[@alessandropacheco7541]

Bom brow. Eu apliquei o decal e deixei secar por 24hs. Quando apliquei o verniz ( o mesmo do vídeo), odecal ficou todo irrugado. Parece que houve uma espécie de reação química. O que pode ter ocorrido ? Obrigado e parabéns pelo vídeo.

[@gugarl]

Antes de aplicá-lo, você passou um verniz de artesanato sobre o decal?

[@alessandropacheco7541]

@@gugarl não apliquei. Vc aplica verniz de artesanato no decal antes de verviz spray ? A aplicação do verniz artesanato é feita com pincel ? Poderia me dar as orientações? Desculpe o incômodo.

[@gugarl]

@@alessandropacheco7541 Aplica umas 3 demãos spray. Uso este: www.casadaarte.com.br/verniz_acrilfix_brilhante_acrilex_300_ml/p

[@gugarl]

@@alessandropacheco7541 Em 1:50 eu aviso que antes de aplicar tem que aplicar o verniz. Olha este outro vídeo: kzbin.info/www/bejne/a3usaaSkndV4gcU

[@alessandropacheco7541]

@@gugarl vou proceder dessa forma, pois a sua aplicação é perfeita. Obrigado pela gentileza e suporte. Forte abraço e sucesso!

[@negovei1]

Hi! What stain did you use to get that amber color on that maple neck? Did you apply first or you mixed it with the lacquer? Cheers!

[@alphagt62]

A beautiful job! And the silver came out nice. But you skipped over the most important parts of the project. I’d have liked to have seen how you went about acquiring the logo, sizing it on the decal paper. And how you went about sealing it so it doesn’t smear when applying.

[@gugarl]

Thanks. Please, take a look at this other video: kzbin.info/www/bejne/a3usaaSkndV4gcU

[@bigrickshaberdashery2759]

looks good

[@gugarl]

Thanks!

[@deebee8935]

Looks great!! How long do you let silver ink dry..And how long in between coats of nitro before a light sand??

[@gugarl]

Thanks! I let the silver ink dry about a couple of hours, and about 24 h before the light sand. Best regards.

[@nothaus1967]

where did you get the Decal from? did you make it and if so, can you show that part of it.

[@auralfury]

u get them online...google fender decals

[@MultiRogerOliveira]

em qual momento vc aplica o fixador, da Color Gin, não reparei

[@gugarl]

Depois da aplicação do deval

[@BandaHellCat]

Beleza Gustavo?! Engraçado quando você passa a lixa por cima o decal não solta??? dá a impressão que ele vai sair todinho...ou descascar... estou com medo de tentar e perder o decal kkkk mas vou arriscar Abraço Excelente vídeo P.S Mais uma dúvida, onde vc aplica o spray?? Vc mostra, mas não aparece você aplicando no vídeo...?

[@gugarl]

Obrigado! A lixa é bem fina e lixa muito pouco. Mas tem que ter cuidado mesmo, ou pode pegar ela, caso a camada de verniz for muito fina e lixar muito.

[@felipecamera5629]

Olá, vc imprimiu em algum tipo de papel especial? Obrigado pelo vídeo!

[@leonardocolissi8161]

Cara usei esse mesmo verniz e o decal enrugou, se que o decal era ruim?

[@gugarl]

Você passou verniz no decal antes de aplicar?

[@leonardocolissi8161]

Comprei de impressão a laser teoricamente não precisa envernizar antes, q eu sei o verniz e para waterslide jato de tinta pra não borrar a tinta quando molha, mas no meu caso é enrugou toda a folha usei dois tipos de vernizes e não rolou acho q a folha era de baixa qualidade.

[@gugarl]

Sim, mas pode tentar passar para ficar um pouco mais resistente. Usei este: www.kalunga.com.br/prod/spray-acrilfix-fosco-(verniz)-10972-acrilex/706400

[@minoritygaming4009]

leonardo colissi 0

[@BrunoCespeR]

Gustavo, vc faz pra vender? sou do RJ

[@patrickjosephtobin8014]

what's the liquids ?

[@gugarl]

Oil, but I would recommend water with a drop of soap.

[@gugarl]

*for the the sanding part. The decal applying should be with water.

[@patrickjosephtobin8014]

So when the decal is dry you sanded the decal with paper & oil ? To get rid of the decal edges?

[@gugarl]

@@patrickjosephtobin8014 you need some clear coats before sand, and repeat the process until it looks good. You will not sand the decal, but the clear coat.

[@gugarl]

@@patrickjosephtobin8014 I don't recommend to use oil to sand because is hardest to clean before the new clear coat.

[@papitoyomecai1776]

Which is the materials

[@gugarl]

Water slide decal paper, nankin = China Ink (silver or gold), feather pen or dip pen to paint, water, scissors, lacquer, sandpaper

[@devinmcmahon8871]

great video! was there already some gloss finish on the headstock before you applied the decal? and i'm assuming you spray a clearcoat in between sanding during the camera cuts?

[@gugarl]

Yes, you're right.

[@devinmcmahon8871]

thank you! and thank you again for an informative video :)

[@airwolf08]

i love this video what type of ink do you use

[@gugarl]

Thanks, I used Nankin = China Ink (silver or gold)

[@airwolf08]

@@gugarl many thanks do you get it off amazon

[@gugarl]

@@airwolf08 I bought in Brazil, this is the ink acrilex.com.br/produto/linha-escolar/office/nankin/

[@dreamoperator303]

What are you using to clear coat the headstock? Where do you get it?

[@gugarl]

I used general use acrylic clear coat.

[@hbert06]

You can also use a laquer pen so don't need a feather and lots of ink you'll never gonna use again.

[@gugarl]

Good tip, thanks.

[@cuda426hemi]

Eh, small jar of silver/gold ink: $3.50 (Tim Holtz Alcohol Inks) - can be used many times with ANY pen or brush. Conversely a fine point lacquer pen $6 doesn't last as long and only does ONE thing. 🎸

[@hbert06]

@@cuda426hemi before I even try to use ink with a ballpen or a pencil - the edding gold laquer pen is 2,- € ....

[@LightTouchWoodstock]

Hi. Do you sell these?

[@gugarl]

Building a custom Telecaster inspired by the 1950 Fender BROADCASTER: kzbin.info/www/bejne/gJOtmaSJi5Kafs0 DETAILED VIDEOS: #01 Grain filling kzbin.info/www/bejne/jaayiHlqiMiJacU #02 Dyeing kzbin.info/www/bejne/eIS3YWSonqt8rqM #03 Tru-oil Grain filling and finishing kzbin.info/www/bejne/e6q1epWInLWljdk #04 Installing string ferrules kzbin.info/www/bejne/aH-UeYGLhtWFY7c #05 Shielding kzbin.info/www/bejne/pYjCk4ePrc9sobs #06 Installing a hardtail bridge kzbin.info/www/bejne/q4DcaIVoiLd5gNE #07 Wiring kzbin.info/www/bejne/anrEfWWJp5mBkKM #08 Creating and applying a true SILVER waterslide decal kzbin.info/www/bejne/g4GqoYaXhLyUZ68 #09 Installing tuning machine heads kzbin.info/www/bejne/n2O9nJmHlLp1abc #10 Installing the neck kzbin.info/www/bejne/m3SlqWyQr791e9k #11 Installing pickguard, control plate and string retainer kzbin.info/www/bejne/f3WafISHh5Zrrsk

[@EriccsonGuitarBassMan]

Cooool!!

[@THRobinson]

Would a silver or gold gel pen work?

[@gugarl]

I don't know, give a try and let us know! Best regards.

[@THRobinson]

Will do. May grab a Pentel extra fine super gold paint marker as well. I have a dip pen... but after seeing a few other vids on this, some cases the ink looks pretty thick on the decal, which means more clear coats and sanding when done to make it flat. Gel pen is really thin and smooth... marker pen has a nicer gold though than the gel pens.

[@telover3661]

It doesn't. I tried some and gel ink is not good because it bleeds away when being wet. Get a permanent marker with a fine point but check the tonality of the ink because there are several.

[@flaviopintinha85]

Olá. Muito bom o trabalho! Você faria um decalque para vender? Preciso de um para restaurar uma guitarra, mas não tenho o talento necessário para fazer um decalque decente...

[@andreferreira3417]

Há à venda na amazon

[@danielmudbonethimm777]

Where did you get the original artwork for the waterslide.... I have been looking all over for them.

[@gugarl]

I can't remember now, but I can send you the file.

[@dscdrkel5546]

USE MEDIAFACE5 PROGRAM TO MAKE AND PRINT ANY SHAPE AND FONT- i HAVE USED THIS PROGRAM SINCE VER 1**LAST 20 YEARS**DR KEL***PURCHASE ON LINE FOR $15.0 ** YOU CAN FIND THE FENDER FONT ON LINE

[@diegocalves]

Cara, muito legal. Você trabalha com isso ou é só um hobby? Queria refazer o acabamento do braço da minha telecaster. Uma Fender Baja.

[@gugarl]

Valeu, Diego. Só hobby mesmo.

[@telover3661]

One thing is not really clear: it seems you printed and painted the back of the paper, the side with the glue. Then sprayed the clear coat to fix it before to rinse in water.

[@gugarl]

You're right. No need of glue to fix it. The water, and after dry, clear coats are enough.

[@telover3661]

@@gugarl damn, I just realized it. You put the decal on the headstock upside down. But in this way the surface with the glue is up, not on the headstock. So you need to fix it with clear coat since the amount of glue on the decal it's very little.

[@U2ENDOFTHEWORLD]

Mel dels, vídeo de um brasileiro escrevendo tudo em inglês. O pessoal do BR não se ajuda!

[@humongy]

todo estuvo super, pero quedo torcido al ponerlo eso quita credibilidad del logo no?

[@gugarl]

Gracias

[@MadSteexProduction]

where did you buy the decal?

[@gugarl]

I bought the waterslide decal paper and printed the logo using a laser printer. You can find it at eBay. Take a look at this more detailed video: kzbin.info/www/bejne/a3usaaSkndV4gcU

[@volkwolf2511]

may I use not laser photo printer epson l800???

[@tokenblakguy7268]

The L800 is not a laser printer.

[@volkwolf2511]

are you serious??))))

[@tokenblakguy7268]

Yes sir. From their web site: "photo printer with integrated *ink* tank." If it was a laser printer it would have toner cartridges, not ink containers. You may still be able to use it if you laquer over the ink, but someone more informed than me would need to confirm that.

[@stefentan4430]

Hey. How do i remove my old logo lol

[@gugarl]

Sanding.

[@PopeShaitan]

Great job. It looks very pro. Was that oil that you used for sanding?

[@gugarl]

I used peroba's oil, but now I recommend wather with some deterget drops. Oil is harder to clean before the next clear coat.

[@RandyRugarMusic]

Beautiful work! 😍 I would pay $10 each for these I've had so many issues with decals..

[@denboe2894]

1200 Grit is about as harsh as using a cotton sheet and.... rub real hard.

[@gugarl]

Yes, right.

[@michaelborn3318]

Wow, looks great and you can now sell it as a Fender neck! I'm surprised that Fender would let you violate their trademark that this.

[@canalsemconteudo7217]

The problem is where you painted there will be no fix contact

[@NathanChisholm041]

Mate are you wearing acrylic nails? 0:49 lol Also its crooked slightly!

[@gugarl]

Hahaha this os my wife's hands

[@NathanChisholm041]

@@gugarl I saw further down the comments oh well lol

[@sharpenflat6002]

are you going to tell people the truth when they say "wow-you have an original "Broadcaster?"

[@gugarl]

No way to fool anyone. They have a lot of differences, easy to spot. I've just built this inspired by the Broadcaster, not an exact replica. Also, I put a decal on the back of the headstock that let this clear.

[@robertscott3399]

ive done its vary time consuming and you had better printed a bunch cuz your gonna need them lol

[@patwelch8187]

What products ??? To fast !!!!!!!!!!!!!

[@gugarl]

Hi, Pat. Please, take a look at this more detailed video: kzbin.info/www/bejne/a3usaaSkndV4gcU If you need info about some specific product, please let me know.

[@hanshollestelle]

I'ts Art

[@gugarl]

Thanks!

[@vite1968]

focus god damn it

[@TheTriplelman]

its crooked

[@gugarl]

You're right ;)

[@pernormann4869]

You just place it onto the surface. Next time glue it on. ;-)

[@gugarl]

I used clear coats to fix it.

[@nobodyknows4590]

No.

[@bilbobaggins2083]

For a guy you have nice nails. Not my kind a male nails but..

[@gugarl]

Bilbo Baggins hahaha this is my wife, dude.