We are professionals... professional IDIOTS!

Learn more about NZXTs full lineup of prevuilt PCs or their BLD KIT here! nzxt.co/JayBLDKit
New Customers Exclusive - Get a Free 240gb SSD at Micro Center: micro.center/a9fe45
Bitspower G 1/4" Mini Valve - Matte Black: micro.center/66b996
Corsair Hydro XR7 Triple 360mm Water-Cooling Radiator: micro.center/fb565c
PrimoChill Liquid Filling Bottle - 1000mL: micro.center/d11d2b
Get your JayzTwoCents Merch Here! - www.jayztwocents.com
○○○○○○ Items featured in this video available at Amazon ○○○○○○
► Amazon US - bit.ly/1meybOF
► Amazon UK - amzn.to/Zx813L
► Amazon Canada - amzn.to/1tl6vc6
••• Follow me on your favorite Social Media! •••
Facebook: / jayztwocents
Twitter: / jayztwocents
Instagram: / jayztwocents
SUBSCRIBE! bit.ly/sub2JayzTwoCents

[@lukeperryglover]

"Sorry about nick's exhaust" Nick being so proud :P The car ride back, and Jay buying the wrong part. Niiice lol Especially Phil editing in his own facepalm. haha

[@epb091786]

Please teach him how to rev match downshift.

[@techfreak244]

the facepalm was glorious. even phil knows jay can make dumb mistakes lol

[@lukeperryglover]

@@techfreak244 obviously haha

[@jonas000111]

Dude I gotta stop reading comments before the video is over, talk about a spoiler lol. Literally watching the part at Microcenter where Jay hands Nick the xr7 rads when I read this.

[@lukeperryglover]

@@jonas000111 yeahh. Sometimes it's hard not to see the comments especially if you're on a computer they're just on the screen.

[@hammer9856]

I don't think I've ever seen Jay that red-faced before as when he discovered he grabbed the wrong part at the store. Phil's laugh was the icing on the cake. 🤣🤣🤣

[@danagibbs3265]

To be fair, the only thing describing what that is is one text on the sticker. Very plain box with little indication as to what's inside

[@abidlack1980]

It's nice to see Jay out in the wild every now and then, plus being outside provides some healthful benefits. :)

[@kingjoe3rd]

some people claim the opposite is true but those people are crazy

[@Finger112]

We need a JayzTwoWild channel now.

[@bertruttan129]

Yup! rebreathing through a mask that is used just to go in public, that's healthy all right! Kind of defeats the purpose of fresh air out in the wild imo! To each his own.

[@Finger112]

@@bertruttan129 Breath of the Wild.

[@XLTBlarg]

@@bertruttan129 Covid is still a thing and Jay daddy is kind of a boomer. I think him not dying is more important. :

[@TheCoolGamerrx]

8:01 Phil's laughing clip was much needed lmao

[@mclovin9848]

"We almost died" 😂. For the sensor panel you add a hinge to the mount so you can adjust it to the angle of your liking. Also having a fold out sensor panel is just cool.

[@gotdangedcommiesitellyahwa6298]

Amazing how I can respond to the spam bots, and my comment gets deleted. Yet they refuse to do anything about the bot infestation on this platform. 🙄

[@mclovin9848]

@@gotdangedcommiesitellyahwa6298 Right?? I mean my comment had some... vulgar language. But it got removed real quick ans yet this bot comment is still here 😂

[@Kozzren]

@@mclovin9848 Plot twist these are youtubes bots lmao

[@mclovin9848]

@@Kozzrento be honest would that really be a plot twist at this point? 😂

[@rushinsavage]

you definitely should bring back the "two idiots do.." type series but now you can upgrade it to "three idiots do.." haha love all that you three do keep up the great work!

[@ghomerhust]

new channel: 3 idiots with a camera

[@WhiteshadowTV]

Phil's editing will never cease to make me laugh, that was brilliant

[@joserifaie]

Phil is awesome

[@chrishenson9382]

These are the jayztwocents videos I really love - nerdy, informative, funny and a bit goofy.

[@ghomerhust]

a BIT goofy. right.

[@Alberos]

Yeah.... just only "a bit"....

[@CybrSlydr]

Great that they have a ton of stock of the 6800XTs and stuff, but the pricing is still obscene! Was that $1400 for a 6800XT? It's a $650 MSRP!!! It's mind-numbingly infuriating that retailers are still getting away with this kind of stuff.

[@curtisbme]

The OEM's are typically the ones setting those prices. All of them have jacked up the original MSRP. I got a Gigabyte card for its msrp of 600 but that exact card msrp was 450 when they released it 2 years ago.

[@RobertoDelTaco]

Although I agree, I hate scalpers with a passion. At the end of the day though MSRP is Manufacturer SUGGESTED Retail Price, so there's nothing illegal about it, it's just scummy, but you can't fully blame the retailer, if people are still buying at those prices then they'll keep selling at those prices, especially online scalpers that have them for 3x the price, if people started boycotting and just not buying them then sellers will have no choice but to lower price. Especially once stock starts normalizing eventually. TLDR - sellers are scumbags for overcharging, buyers are dumb for buying instead of waiting. I'm glad I got my 2080ti 2 weeks before 30series launch and was teased by friends, I don't regret it, and if I waited then I'd be screwed and stuck waiting, and I'm not dumb and impatient enough to buy over MSRP. I love gaming but tbh if I had to wait I would, it's not worth ever over paying for any tech, especially since you know it's gonna be obsolete eventually anyway

[@iHadWaterForDinner]

Houston Mc has dozens of 6900xt's. Theyre not selling. theyre not getting away with it - theyre not selling.

[@YouHaventSeenMeRight]

That's probably also the reason that there are shelves full of them. Not because they're getting massive supplies of these, but that no one is willing to pay those prices.

[@Digikidthevoiceofreason]

$1549 from what I saw. Absolutely ridiculous piracy!!!!!!!

[@ThatDiabeticChemist]

Its kinda cool when you guys just go and buy stuff yourself, I dunno just makes you feel more genuine

[@cofboy2]

They always buy stuff for them self... not sure what you ment?

[@hardlytech9072]

Hey guys, a tip if you want to cut down on RGB software bloat, you can use a cable adapter for your AL120's, connect them directly to a Corsair RGB Hub and control everything through iCue. That's how I do it anyways, I've been really impressed with the AL120's performance, ease of install and lighting! I personally have my RGB set up to be heat reactive on a curve, looks really cool! Anyways, hope this comment helps someone.

[@agentcrm]

iCue might be able to control them regardless. I've just finished building a friends PC and noticed that iCUE could control the Asus motherboard and GPU.

[@hardlytech9072]

@@agentcrm That is true 👍 had trouble getting the Lian-Li software to work properly in a couple of builds. So I switched to using the Corsair Hub if possible to bypass any hassle. Ymmv of course.

[@agentcrm]

@@hardlytech9072 I avoid the issue entirely in my own builds. Because I use a sound dampened case and you can't see any lights in the first place.

[@hardlytech9072]

@@agentcrm That's cool. I enjoy RGB so I use it.

[@stuartfury3390]

@@agentcrm You often have to install ASUS' garbage software for icue to recognise the board though. And that is the bloatiest of bloatware i've ever seen.

[@zered99]

Loved the different intro! taking us with you for tech related and/or other things in more of a vlog style, great stuff as always!

[@nikolataylor440]

Yup keep making those videos with all the steps and process! Love all the experience I get from this! You are the reason that I found my passion! Keep doing what you’re doing! It’s amazing!

[@shaneeslick]

G'day Nikola, I like how we get to see all the though Process & Test Fit Steps too, Jay has said he gets many 'Your Builds take too long, why not just one video with a montage' comments but this way we get to learn Critical Though & Problem Solving Skills, instead of just 'here's the parts', Flash, Flash, Flash 'here's the Fished PC & the Benchmarks that are the same as every other PC with these Parts'

[@phydeux]

Jay picks up a valve instead of a flow indicator. I pick up tuna in oil instead of tuna in water. I think we've all made these mistakes. Fortunately, I don't have to drive an hour each way to get to the grocery store with a ridiculous exhaust.

[@scotrick333]

That tuna mishap... tuna in oil can ruin your day!

[@dannnnnny]

"with a ridiculous exhaust" 🤣🤣🤣

[@phenomanII]

I've drunk coffee flavoured rum and coconut flavoured vodka due to someone picking up the wrong bottle at the store. The coffee rum was alright after several shots of unflavoured rum, the vodka is still sitting somewhere.

[@phydeux]

@@dannnnnny - Sorry, but I find loud rattly exhausts obnoxious, not cool. I think it's more fun to run stealth and silently blow people's doors off.

[@DerrickRG]

@@phydeux beta

[@smarteex158]

Love these vlog types of videos. Thanks for taking us along for the ride.

[@tweb8833]

You could always put the washers on the rad side of the case, it will give you the spacing you need, but will hide the washers completely

[@codygrinnell8676]

then the radiator wouldn't sit 100% flush

[@frameworkparity]

I'm surprised Jay didn't remembered to dremel or file the longer screws at the top to make them fit without the washer. Another option would be to have the washers on the inside.

[@themooq]

That's what I thought. Just cut them down. To keep the threads intact you can put a nut down the screw before cutting. When you are finished cutting, just unscrew the nut and the hurt part of the thread will get corrected by the nut.

[@rodmorgan7041]

But the washer is there on the outside to protect the case from scratching as you tighten the screws.

[@themooq]

@@rodmorgan7041 Nope, it is there because the screw is too long.

[@Bob-of-Zoid]

Best done on a real grinder. Takes a few seconds each, where as a Dremel would take way long. Filing is an option too, of course.

[@Bob-of-Zoid]

@@themooq That's what de-burring is for. If you do it your way you will leave a very sharp edge on the end of the screws.

[@SephAnubisIII]

I love these types of videos where you just give a slice of life to go pick up random items or items you need. Miss the old videos in this style so was great to see

[@baronvonsatan]

impostor

[@TheNoot]

"Knuckleheads Doing Nerd Things" is my favorite JTC format. Thank you!

[@g.mariepickett]

Just want to say how much I appreciate your videos. I watched them for my 2nd build three years ago (huge success) and now for my 3rd build. Thanks!

[@the_dark_defender]

I so wish there was a Micro Center around my way!

[@rogerbowen5753]

You're so lucky to have a big retailer like that where you are. Here in the UK it's mostly online. That said, even if there were a place like Micro Center, I'd still have to take home anything I bought on a bus!

[@timothygibney159]

No Lyft or Uber? I ain't carrying a case on a bus 🤠

[@killroy713]

Don't feel too bad you still have live next one. Im in SLC the "local" micro center is 500 miles away in Denver

[@R0n8urgundy]

Im lucky I live near Bolton and thats where Scan is. Great place.

[@shaneeslick]

I live in Rural Coastal N.S.W. & about 160km/100mi from my Best PC Tech shop in Sydney, it depends on what I need as to whether it is better to get post or drive, post at worst is 2-3days & driving is about 2-3hrs depending on Traffic, postage for small items is $7-$15AUD but it is cheaper for me to drive up & back than the Postage for something like a PC Case

[@andydbedford]

@@R0n8urgundy Yep, I bought my red devil 6700Xt from their website, briliant service too 👍

[@batsugames9687]

I enjoy the behind the scenes videos, antics laughs, I appreciate you guys and your knowledge and bloopers LOL.

[@Matt43]

"I always like to look and see if there is just anything different or new worth checking out." That's me every time I got to Micro Center... and end up walking out spending way more than I planned to!

[@SideBurn12]

I would atleast try with a thinner radiator at the front. The thicker one kinda blocks the intergrated reservoir a bit. A thicker one at the top looks great though! Excellent editing on this vid, Phil 😄

[@RichWhiteUM]

I was thinking the same thing. Also, plastic washers under the bolt head will prevent scratching the aluminum and allow proper tightening of the fans and rad.

[@OntarioGuy430]

That case is looking really clean - especially the motherboard cable runs. Even without the custom cables being installed. Super nice.

[@terryheimerl8674]

Oh Jay, I am so glad to see that I am not the only one that grabs a whole heap of parts then gets home and one part was in the wrong bin or next to the bin I needed. Thank you Terry.

[@justAguyDs]

The chemistry between you three is amazing. Love the vids

[@TrowGundam]

The RGB plug on the Uni-fans isn't really proprietary, it's just a bit older. I think they are used because it is a locking connector unlike the standard 3-pin D-RGB plug. Some Phanteks devices also use this plug. The phanteks stuff just usually comes with the adapters to go to the standard 3-pin. You can get or make them easily enough though. I found them on Ebay for dirt cheap.

[@prodeous]

Another great video. As for mounting of the fan controller. I'd stick with behind if the gpu but not attach it to gou but motherboard. A 3d print that would allow you to plug it into the many puce slots. Another option is to attach it to one of the metal back slot covers. With slight modifications

[@NotThatGuyJD]

The Phil add in face-palm was great work. Actually just this whole episode, absolutely hilarious.

[@susantompkins8810]

Yes! I love seeing how you decide and work out your builds Jay! It's coming along looking sweet!

[@averagedanny4101]

Jay, on the unifans you just can weld an standard argb cable, and it's work just fine.

[@cmarting83]

A while back the guys from GGF released a video where they used 3 120mm radiators in the top position of a build rotated sideways and daisy-chained them with tubing which looked pretty cool and then installed 3 uni-fans just as if they were installed over a 360mm radiator as well. You could do something like that here to help you fill out the open space an look cool at the same time.

[@Y34RZ3R0_ve]

That Phil cut in between, recording his face-palm and diying of laughter... PRICELESS

[@pauld4238]

Micro center seriously needs to expand its locations

[@GSXone]

+ 1 Like for Nic's exhaust! Honestly I am just glad he's back.

[@brunoafonso7632]

It's just sad that in the UK as far as I know there isn't any store like that here. I wish there was.

[@ChiTownRuler023]

I feel bad now since I never been to the microcenter near me because I thought 13 miles was too far

[@dromnispank4723]

We have curry's PC world.... oh yeah, they totally suck.

[@lukecaspers9801]

The Vlog style videos are great jay, keep them coming. Its interesting to see the thought and work processes you use to get to the final stage. Montages are cool and I'm sure they are fun to make, so maybe vlog the builds then afterwards release the Montage video? Love the dynamic you, Phil and Nick have!

[@reamoinmcdonachadh9519]

I like this kind of video, you get to see a bit of the REAL world, USA and hear Jay do his thing. Looking over his shoulder at the world around him, gives ya a sense of place

[@frankjohnson2935]

Just wondering if you thought of adding the fan controller to the small gap between the two rads in the top right of the case. Cable length would be good and I think it would blend into the area. Great vidz man thanks for the entertainment !

[@DJaquithFL]

It's easy to shorten any screw with a Dremel cutting tool. Simply cut a millimeter longer and then use the blade to sand and smooth the rough cut.

[@matasa7463]

Don't turn down the mic, I want to hear that nice exhaust! Bonus JayzTwoCars content. I really miss the podcast content, so this is nice. Hey Nick, show us your custom keeb when it comes in!

[@Bianks84]

Was so nice to see a video start with Jay and Nick in a car! Phil you had me rolling with hit markers and the tie fighter bit!! xD

[@NibNa5ty]

Jay i advise getting a resin 3d printer, they are messy but the learning curve is much easier and the detail is unmatched.

[@ghomerhust]

seconded, PLA, PETG, and ABS will show the layers much more than the resin printer will, and resin needs far less supports during printing in complex models.

[@dickslinger9925]

Interested to see the temps with those Corsair xr radiators work with the lian li fans. The rads are almost strait through air and the lian li has marginal static pressure at full blast 1500rpm but is also quiet at full blast. You wouldn't have been able to use those if you had used Black Ice GTR. You might as well had Corsair sponsor it, cus it looks that way anyhow.

[@cameron.willis]

Loved this one! I was there recently myself and it certainly is an exciting place to visit for PC nerds

[@DaboInk84]

Really enjoyed this vid, first 10 mins had me laughing, and the rest of it was nice and informative, like watching the thought process and not just another montage.

[@whatsappscambot1802]

I'd love to see some videos about that 3D printer. They're hardly present in tech channels.

[@MrHendrikje]

You need to find Maker channels, they talk a lot mote about 3D printers because they can use it for a lot of projects and get a better understanding of them than most tech channels. Unless you are doing a lot of custom stuff for cases and what not there isn't always a need to talk about printers. THere are 2 that Itypically watch, Makers Muse and 3D Printing Nerd.

[@Willay323]

40seconds into the video and they've already ran someone over! 5mins in and Jay is blatantly breaking laws lmao. Great video as always! Keen to see how this build turns out!

[@tehshadowy]

Phil bursting into laugh is just gold, always.

[@WindySilver]

When I saw the trip back, I already thought that Phil must've had a lot of fun editing it. I didn't expect that he'd have even more fun with the footage after it XD

[@ProfessorAB]

7:41 I now truly believe Jay is professional 👍

[@n3Me5i2v2]

Hey Jay, use masking tape on places you think you might scratch the paint before you begin to mount anything. Cool build BTW.

[@shaneeslick]

G'day Kiko, Yeah that is a great idea, also I was thinking get some 0.5mm plastic washers as they are reusable, put them in while setting up then remove them when you know Final Position

[@waynes5807]

Truly wish there was a MicroCenter closer to where I live. The day after Christmas, while visiting family, we drove 3 1/2 hours to go to the Overland Park MicroCenter. Was the first time I have been in one of those stores. Really enjoyed the experience and walked away with a new 3080. The selection of parts they had was truly amazing.

[@vergosen]

You could place the controller in the top right corner of the case above the vertical rad. The cables would be long enough stock then and you can hid any extra cabling behind the rad.

[@bjre.wa.8681]

you're perfect. I mean you humanize computer building. Thank you so much, I mean this sincerely.

[@saiteja1]

6:29 where they almost died in the explosion, definitely not click-bait

[@gauchplant]

I loved that Phil added his laugh.

[@scotrick333]

I hope you guys do more drone stuff. Just as a bonus if you guys find time. It was fun seeing you guys have fun. Also, bring back The RTFM Show!

[@SparklySpencer]

Jay, your knowledge and skills are insightful. I appreciate your humor and ability to bring a smile

[@anthonycwatson5580]

Love your videos Jayz. I learned so much from you. When I can afford to buy a computer, you’ve given me confidence to build one. If you ever need any help with anything, I’m in Redlands.

[@timrettner4184]

As a car guy Jay, I can say I'm used to *BUMP* a loud exhaust *BUMP* and road noise *BUMP* on the way to MC. Dig the new setting it's nice to shake it up every now and then.

[@awetisimgaming7473]

I don't really know what it is,but every time Phil busts a gut, I can't stop either, it helps that he usually laughs at the same stuff I do, but man his laugh is contagious

[@PointerPapa]

I hope you guys bring the podcast back it was nice to see your mixture of humor news every week in this very strange time that we are all living in

[@fritznuffer6676]

I love the insert of Phil face palming Jay! 😂😂

[@alanmoore78]

Best video of the year. Got outside. Touched grass. Didn't get thrown out of MC for touching the printers. SUCCESS!!!

[@AndyTrucker1985]

I love seeing the thought process, it teaches me so much, thanks for not cutting that or montaging it

[@JPWestmas]

I don't think I've seen any computer look that classy before. Thanks!

[@sojiro288]

Lol Phil editing him laughing into the video is great

[@old_cavitating8276]

@Phil, that cut to you laughing was golden sir. 11/10, did watch it again....

[@bradwatson1049]

Phil's reaction during the edit of jay realizing he bought the wrong part made my whole day!!

[@spicywaffles4820]

man I love Phil's editing

[@TheFirstExelion]

This is the "it's just a friend" radiator... LMFAO

[@xaviergroenewaldt8252]

Jay, PLEASE do more of these Vlog style vids! SO FUNNY!

[@AFPCondor13]

This is the kind of content I love from you guys

[@Sammy.U]

Hey Jay! I have one comment: I love your builds and being a part of them as you take us along the rollercoaster. I would love to see more customizations with your builds. Stuff like custom built cables, custom paint, and some case mods. You're builds are brilliant, and taking a step up in more customizations could take you and all of us to the next level in computer builds. So pumped! Love the Spectre III!

[@aman121495]

Goes to show, even guys that makes KZbin videos on PC parts still get excited about Micro Center.

[@PabzRoz]

I just bought the Ender 3 Pro from my local microcenter for only $100 during their promotion! Nicks going to love it. Such a good printer it's amazing and easy to use. It's insane the amount of value you get out of an ender 3. Definately get a BL touch as an upgrade though. You wont have to worry about leveling the bed anymore. Just click print and get a perfect first layer everytime.

[@xboxhater12345]

The “Knowledge” was it for me 🤣🤣🤣

[@_SiN_acai_]

Phil cutting in on this video just made my day 😂

[@Neeb1337]

Man sexy flow meter you have there...I literally laughed out loud. Thank you Jay my weekend was crap, and needed the laugh. =)

[@dhowting]

You killed me with your.......flow meter!!!! I love you guyz!!!! Oh and the "can I please touch?".........BONK!! Was good too!!!!

[@alex5315]

More of these please. It's good to see you in your natural state lol

[@SimFanatic]

This part is hilarious (6:25) especially with the Tie fighters and explosions a few seconds later lol!

[@weirdgamer6220]

JAY the gift that keeps on giving

[@SilverKnight16]

The single cut to Phil laughing made all of this so much better. XD

[@mikew8214]

I'm going to be in Atlanta this spring. Definitely gonna have to go on a pilgrimage to Micro Center while I'm there

[@BeB02090]

Yes!!!! We have missed this more then you guys know! 🤗

[@drtaru]

I like this style of video every once in a while, back to roots.

[@dustypop123]

Love this style of video. The build is looking good jay!

[@Dani_Escalada]

19:00 you could put the washers in between the case and the radiator, that way they are not visible on the top of the case but hidden in between.

[@jamesmarchetti3286]

Real cool video! I just watch and learn. Especially your techniques!

[@Dan-Simms]

So jelly you have a local microcenter, wish they had them in Canada.

[@woodrax]

That tie fighter/explosion add in during the drive fast forward had me rollin’

[@jordanm8595]

Great editing and great content. Keep it up guys!

[@ThePopeofPoland1]

That Phil cut away was awesome!

[@claytoncharman1246]

This build is going to look so good , Loving the Stealth look !

[@Warhorse469]

we need more of these type of videos.

[@james589]

Really enjoyed the video, liked the style of this one!