WE BUILT A GIANT WALL AND NEW BACKYARD SKATEPARK FEATURES!!

The DIY backyard skatepark is one of my favourite builds ever! I know loads of people are missing the Playground but it's too wet to build and ride there right now so instead of dirt jumps this skatepark mega build has been the perfect project for the past month. Look at the insane progress we made with this new vert wall and quarter pipe section, it's almost ready to ride! What do you think I should build in the final area?
Enjoy the 2 build lapses and planning!
Legends
----------------------------
Intro music by Damtaro -
Music from freetousemusic.com
Nothing by Damtaro
• Damtaro - Nothing [FTU...

[@jackmoseley31]

Get some rugby post pads for those RSJs. You'd probably have to hollow out the centres a bit to fit, but would do the trick to stop injuries

[@ThisWillCharacter]

I hope he sees this cuz catching his hand would be a trip to A&E but if something goes wrong transferring to the ramp and he ends up going off to the side and hits that thing head first, that’s fatal

[@ThisWillCharacter]

I hope he sees this cuz catching his hand would be a trip to A&E but if something goes wrong transferring to the ramp and he ends up going off to the side and hits that thing head first, that’s fatal

[@Ferit2813]

@@ThisWillCharacter holy what? Grian watches this?

[@ThisWillCharacter]

@@Ferit2813 who is this grian character? I am grain

[@benebert6181]

I was thinking ski lift pads. But same thing 🤙

[@hayktunian]

matt has to be one of the best mountain bike youtubers of this era at the moment. keep it up matthew!

[@i-_-am-_-g1467]

Sam Pilgrim really has to take that cake for me, he *IS* the pioneer of mtb youtubers and was the one to bring the sport to the platform. Hard tied with Matt as he brought it to the masses and got everyone involved and gave us some world's first inbetween! Of legendary status nonetheless!

[@i-_-am-_-g1467]

Not that Sam never brought worlds first either like the flat drop backflip and frontflip as an example

[@i-_-am-_-g1467]

Be sick to see them make a moveable kicker to make infinite lines a possibility also, to me they really open up a park that has limited space.

[@danielclemence1942]

I agree, can’t watch anyone else like matty boy over ere

[@kevinscherp]

Sam is fun to watch, Matt is a learning experience and fun to watch

[@GalacticWoodsman]

I don’t know why but I’m well excited to see you guys fit the curtain 😂 looks awesome, many hours of riding to come!

[@jeskobendmann5166]

Really hope it's not going to be ripped apart by the wind. Pretty sure it' going to be though. 😵‍💫

[@AlwaysSearching..]

I know it would make it a lot more complex and take a hell of a lot longer but would be unreal if the last 2 internal corners you gave them an internal radius and created a half bowl shape, you could also do an external radius on the roller in the middle so it slopes out to the flat and can be ridden from all angles. Would make that whole area flowy and be able to transfer into the spine from different angles 👌🏼

[@8eightfab520]

Might need to do some searching but Trey Jones showed a while back on how he does it. I think it was on Big Boys channel. Both are American BMX riders.

[@Android480]

Yes! As he said, you can find Trey doing some radius builds. Or hell, you could prolly just ask the guy how to do it. I think a quarter bowl in the back corner would be sick.

[@josht4923]

A tip for if you're cutting heaps of timber the same length would be set up a jig/ endstop. That way instead of having to measure every length, you can just slide it up until it stops then go. It'll save heaps of time overall for the amount of time it'll take to set up. Even just clamping a bit of wood will do the job 👍

[@frankmatibs8076]

Yes correct always use a pattern or stop for repetitive cuts Use a tape as little as possible in construction belive it or not Top job though boys

[@johnmeals7830]

The amount of effort and money the boys and you put into these builds is without a doubt nothing short of amazing. Love the videos.

[@TEGRIDY_FARMS]

Im sure that he’s probably breaking even with the youtube money. Which means more content for us! And more fun for him.

[@petebates6576]

@@TEGRIDY_FARMS Matt has also gained 100k subscribers over 2022 so this channel will just grow and grow.

[@finjames3994]

the step up is a cool idea and you could even have something underneath the new decking

[@ryanlockyer2408]

YES, AMAZING IDEA

[@RickCurran]

Skate lite is a great surface for ramps, but the 6mm version in particular is really meant as a durable finishing layer. So normally you’d use something like 2 x 9mm ply layers and then 6mm skatelite on top. Running only a 12mm surface with skatelite on would likely be prone to rippling over time, especially if the joists are bigger than 300mm apart. The other issue is that whilst skatelite is durable and water resistant you need to ensure the underlying layers have been sealed to withstand the elements or otherwise the ply layers will just rot under the skatelite. So overall I’d agree that just using plywood makes more sense here, but if you did happen to get a good deal on skatelite please ensure the plywood underneath is well sealed. Note that even if it’s not directly exposed to the elements condensation can still be a source of moisture in a semi-open environment like a barn.

[@NJRD977]

If your curtain becomes a kite, look at a mesh livestock panel - although it will not be 100% waterproof, it will keep a surprising amount of weather out, lets light in and stands up to the wind better than a solid curtain ( most farms use them on live stock barns to keep the worst of the weather out)

[@user-qj2gi4ub7k]

Search for Galebreaker

[@danielgibson4744]

Came here to say this. That livestock curtain is surprisingly good against rain too.

[@Sreter]

Matt, not sure if you've got plans for the last third of the warehouse but would be sick for those 2 corners to be wrap around quarters! Loving the progress btw, absolute dream backyard skatepark build!

[@ayyjayy6480]

Yesss it could be like two quarters and form kind of a bowl around the corners as well

[@Sreter]

@@ayyjayy6480 exactly! would be super fun to blend that whole back section. could add several directions for transfers and what not

[@zachm1313]

exactly

[@zachm1313]

i just said that to get more comments under this so matt will notice it

[@AlwaysSearching..]

Just what I commented! And make the roller in middle flow out to every direction of the flat not sure how this would be done in ply tho

[@PlonkerConka]

Matt and the gang aren't only some of the best mountain bike content creators on this platform, but some of the best content creators full stop. I guarantee people with 0 interest in the sport would find themselves giggling at this channel, and then when you add the dedication and passion. On top of that it's three regular people just having a go, making mistakes and learning. Unreal work team ❤️

[@JackBrady]

Hey Matt, it’s looking so, so good! What a project! I’m not a mountain biker at all so have no useful suggestions with the design of the rest of the skate park, but have you thought at all about having fixed cameras in the barn for filming videos? Having the roof and the walls could give the potential for great shots and putting any cabling in underneath the wood at this stage could keep it out of the way. Can’t wait to see you guys riding on it :)

[@danielweller6533]

You should get some rugby post protectors for the iron posts… they’re like upright crash mats!! 😊 great content.

[@pharris125]

Hats off to Jameson for spending hours on the miter saw!! Honestly love these videos, great work boys!!

[@alexhocking2111]

Definitely think about making some sliding doors. As soon as the wind gets up, the curtin will rip off the eyelets.

[@coreygallant4933]

more people need to put in effort like this into parks sick buddy keep it up from canada

[@Dannyjones1]

Seriously, what a fantastic job you've all done and you should be very proud. Looking forward to to seeing the finished article.👏🏻

[@JoshBolin4]

If the big curtain doesn't work you might have to do big rolling doors you can push back to the other side of the barn. can sheet them with steel like the rest of the building, might have to do something where its 2 or 3 rolling doors that are staggered

[@michaelnotary5205]

Epic. Nice wall. Curves and a pump track in the back.

[@kyleheaser351boombaby]

Anxious to see the finished product! Cheers!

[@joecrowe7367]

Cannot wait to see the rest of it! Keep smashing it lads! 👏👏👏

[@mintybmx7122]

Step uuuuupppppp!!!! I’ve always wanted to build a step up like you described! Seams perfect for sending tricks off of the resi/airbag! Please build it I would love to see it!!!!!!

[@alephabebe9456]

You know it’s a good day when Matt posts

[@deathwatch76]

I would say the 3 following things: 1- Shorten the spox at the steel beam side by about a foot and leave that as a flat passthrough for excess speed. 2- Make sure you tie the vert wall to the barn cross beams for rigidity and 3- Future build idea - The corner to the right of the vert wall, make a 1/4 high wall bowl :) Love to see what you do next!

[@renebarger3667]

You may want to consider little cutouts in the curtain to reduce wind load. You see those little smileys in vinyl signs for exactly that purpose. Also, would it be easier to ply the vert-wall from top down to stand on the horizontal pieces as you go? Or perhaps just screw some pieces into the decking to stand on and work upwards.

[@alexmakoid620]

A banked (like a bowl) corner next to the giant wall might be interesting. and then flow that into your step up concept.

[@olafemke]

Wishing you all the best screws and rides for 2023

[@deanharriss2029]

Great job guys

[@nuttertv]

Living the dream. Building what you want to ride. Love it

[@scottpink2013]

just never stop building and riding! it's always amazing!

[@Logan-fo8tb]

I’m not even a minute in and there’s already a build lapse I love it

[@mattjones05.]

Thanks for the feedback. 🔝 Contact us on telegram 🔝 for Giveaway package 🎁🚲🚲 I have something special for you🎁❤️

[@gregcampbe1l]

When cutting radius’s it’s much quicker and cleaner to use a nice circular saw. Also a stop block for your miter saw would save you guys so much time. Just need a an extension either side of the miter saw then screw in a piece of wood at the correct length, it will save you guys so much hassle

[@Chip1528]

Hey Matt. Build a small roof over hang facing the driveway area about a foot wide all the way down the curtain opening then put your curtain under that so no water comes in through the top of the curtain. Just a thought. Great work guys. Keep it up....LEGENDS !

[@allandodds6105]

Looks great and I hope when the wind gets up the curtain stays up. Can’t wait to see this ridden.

[@jedijakobi8978]

Epic build! Could always paint the plywood or woodseal/stain it to help preserve it somewhat.

[@timmylittle2973]

it is a street spine. period. great for learning peg and coping type tricks with the exception of grinds. very nice ramps so far guys. all the thumbs up. 👍

[@emilycooling1948]

cant wait to see the finish project. im on the edge of my seat to see some amazing riding to come in the future

[@danielf9733]

For the corner next to the wall and the quarter, perhaps that is where you could fit a half or quarter bowl. Love the videos, keep on going Matt!!

[@dawnkangas2968]

Absolutely amazing can’t wait for the next video

[@mikaylaclements8809]

Can't wait for it to be finished and watch you guys ride it

[@charliesmit3208]

Looking SO GOOoOoOD!!!👌🙌

[@joshridemtb]

Safety glasses! Protect those eyes! ...and definitely some padding on those steel columns. Sick build!

[@soundwarper]

Absolutely loving this! What a wooden wonderland! Sick stuff. 👊😎🤟

[@detsz2157]

Cant wait to see this finished looks rad

[@jeffb.1555]

Matt Ben Jamie. We need a massive video, they just aren’t long enough! Probably the best videos on KZbin!! Keep it guys.

[@Jude-qv8tb]

Thank you Matt for the great content keep up the good work and motivation you create for others

[@smokingtough]

Get caulking, squeeze it out into a pail, and add water till you get a paste like consistency, brush it onto all the edges of the plywood, it will save that wood and will last way longer.

[@jonascoeman]

A curtain!!! wonderfull

[@ottosutton592]

Looks sick

[@kirbyhurst]

I LOVE THE INTRO SONG AND THE BUILD LAPSE SONG I HOPE THEY NEVER CHANGE

[@jeffreywaite2585]

Love this man. Me and a couple friends did the same thing in a garage like 15 years ago. Even the same 8foot Quarter pipe with to 5 foot extensions on both sides plus a spin and half pipe and a wall ride.

[@Minfiget]

Looks awesome

[@dawnkangas2968]

Absolutely awesome keep up the amazing work

[@TheMrbazooka]

Top Job Chaps 🤘

[@mikefay4323]

Either in one of the corners or against the long wall there should be a small concrete section. And built into the concrete section there should be a fire place with a metal or stone chimney that can run all the way to the ceiling or a right angle out the back wall. A fireplace with a 6 ft roller over it. Warm n cozy in the winter!

[@GlennsHardWired]

Ex bmx racer of the 80s and 90s here... At 50 my knees and shins can't take abuse like they used to so I don't get to ride as much as I like to ...however these vids from Matt has inspired me to ride more mtb slope style..wish we had these bikes in the 80s... damn this is fun.

[@elmuproyek965]

wow, the design of the building is really cool

[@sarahgowling7574]

I love the look of this my pocket I feel like I want to ride it keep up the good work🎉😊

[@loganscelina]

Looking awesome! You need to garden mesh up the gap at the front door floor and ideally dig it down at least 6in though to keep critters from making this the perfect waterproof home.

[@peterbarclay2472]

So cool 😎

[@g.w.customcreations3534]

Step up into a low-ish bowl corner, like 4-5ft quarter. You'll probably find that if you're riding bmx a lot in there, that the smaller stuff gives a nice techy contrast with the huge vert wall and quarters "downstairs". Loving this build series lads, more power to ya. 🤘

[@jmwalls73]

Epic and SAFETY GLASSES!

[@kerryoneill1210]

Looks epic!

[@cantthinkofagoodname1622]

This park is awesome!

[@nomideroos2960]

Matt this content is unreal. Don't forget to name the park.

[@KennyRider24]

This is looking so good! Loving this videos.

[@OfMasses]

I would recommend a street style section for the next area. Maybe a bank/quarter, leading to a pyramid with a ledge/rail, then another bank/quarter at the opposite end?

[@danielbrady8975]

Dirt jump videos in the pm, workin the ranch in the am 💯💯💯

[@CanonFirefly]

Marine ply is the go. Much more resistant to water damage. At the opening of the shed, build a verandah about 3m high to provide more shelter and then clad the wall above the verandah. You'd get some sheltered area then for spectators as well.

[@nexusgamer1746]

Im so excited to see how the building continues :)

[@thomasfisher1525]

So many great vids are gonna come out of this park

[@andysheppard9727]

Personally, think the roller is point less Could have a step up with a quarter/ vert wall after that you can air down in to another 1/4 to a steep jump box! Loving the build and progress!

[@matgt4]

Great work, great content. I never comment but felt your effort deserved it! Cant wait to see it come to life!

[@adammccurdy5345]

Auwsome work well done gents happy new year can't wait to see what you have planned for 2023 🥳

[@oliverurry]

Love you keep the good work up and keep inspiring us younger people in the would

[@menacemedia1279]

Daaaaam dude! Impressive

[@OLI-vx1md]

Really like the step area idea dude.. that will really tie it all together and open up a lot of transfers and options for varying speeds . Nice one to all involved.. it's a banger 🤘 *Merry Christmas brahs*

[@ricky450f]

I’m loving these latest build video’s 👍🏼👍🏼

[@lukapasalich9821]

wow matt just amazing

[@kalegeoffry190]

I think it would be cool to ad a rail or a box you can grind or boardslide maybe. Keep up the good work mate, love the vids

[@kieranbrain3733]

Well done lads. GRAFTERS.

[@mikewerndly8381]

Year's ago the council painted Newport pagnell skate park bright orange. It was a protective paint of sorts, helps stop the ply falling apart under the stress of being a ramp.

[@twowheelerbrosbarnett9122]

Best KZbinr ever and love this series and we need a tour of your farm and your number one fan ❤❤

[@robertatkins3361]

Incredible video as always Matt! Always brings a smile to my face when I see you have dropped a new video. I'm sure you have thought of this as you are clearly very smart, regularly displaying your A-Level (or higher) Maths knowledge, but just make sure that curtain doesn't transform into a huge parachute when the wind gets up!!

[@4perta]

This series is so sick

[@chrisshiels4704]

Buy yourself some tins of weather shield paint and seal all the cut or end grains of your ply wood and you will be sweet Matt! Killin it

[@Dream-season]

This is the best series going right now!!

[@Squaredonut420]

My favorite series ever right now please don’t stop with this

[@Alex-m8515]

Beast mate

[@albiebarlow3062]

Love your vids

[@HO14GTE]

Step up idea to 2nd level is great idea…try use the space underneath also to get maximum benefit. Need to find somewhere for a rail / box to practice your grinds

[@lowvibe]

yes boys..that build laps is off the charts..congratulations.. you have created a wall that unites people in joy..that is good job for sure.. happy New season.. 👆👆👆

[@SavageAudits]

Walls work on nation’s borders, quite well.

[@rong4189]

Awesome project and love the channel. To preserve the wood, I would seriously consider painting the plywood with a grit mixed in the paint like a non skid surface . . . . . On second thought, I wouldn’t want to slide on sandpaper and I don’t imagine you would either lol. Oh well, carry on boys!

[@mick6949]

Hi mat and the gang 🤠 love the videos 👍 my only concern is the barn you are building in. The wall sheeting and the roof look lick asbestos!! Really not good to breathe it in 😏

[@roobullock2310]

I’d get that open part of the barn and build a 4 th wall to stop the wood from rotting it would also keep the heat in

[@sidmtb01]

Sick vid Matt

[@eternal3083]

the curtain is perfect lol u could even install clear polycarbonate along the top edge of the open wall to serve as a big window that will let light in and run the curtain right underneath it

[@Michael-Martell]

Build a bowl with a cradle with a flat roof to 90 out to its own outdoor jump line. Next to it a quarter to stand on. Then a staircase on top of the cradle and you can feature off into something below, or just make use of all that vertical space for mad shreddage.

[@stuartorme919]

Matt you are doing such an amazing job with your content keep it up! Re the curtain my worry is sail area. Your curtain will have a larger area than a trans Atlantic sailing yatch!

[@codybyas2675]

I’m absolutely loving the build so far! Just throwing it out there, but if you wanted, you could build bowl corners just to keep your flow, maybe even use it as a berm for the step-up feature you want to build