We Finally BROKE OUR JEEP?! Bye Bye Gears and Axle!

LITE BRITE NATION
↠ Patreon - / litebritestudios
↠ Merch - www.litebritestudios.com
↠ Stickers - bit.ly/2Tt20Wh
↠ Amazon Store - www.amazon.com/shop/litebrite
↠ Facebook - bit.ly/2HatSru
↠ Instagram - / litebritestudios
Sooo, we broke our Jeep. Gears and axles and much much more!
Hope you all enjoy the video and stay tuned for more in the next video!
Northridge 4x4 (Use promo code 'LITEBRITE' for up to 20% off) -
www.northridge4x4.com
Carbon Offroad -
carbonoffroad.com
UTV Pros -
www.theutvpros.com
Corbin Custom Works -
www.corbincustomworks.com

[@RyanRKJ]

It’s always nice when breaking your Jeep does not involve it being completely disabled in the woods.

[@2fuzzies]

I'm running carbon axles with G2 5.13s. Great price and warranty for the axles. Bounced around Moab twice and all over AZ with 37s on steel wheels, no issues. Very happy with axles and gears. Northridge 4x4 is an excellent way to relieve your wallet of money. I've probably put a few employees kids thru college.

[@boughtnotbuiltoffroad7784]

2fuzzies haha

[@TooBrokeToWheel]

So new gears went in and you immediately hit the road towing. So much for break in procedure. Steady speed dragging a trailer, both of which are bad news for fresh installs per Yukon.

[@LiteBrite]

Michael Prewett We aren’t towing anything to LA and had 4 days to break in these gears. Lol Relaxxxx. 😊

[@jimschmidt4089]

Hats off to the guys that took care of you and got you back on your journey. I'm always impressed with the majority of off road community. It seems that people are always there to lend a hand when they can. Hats off to you guys at finding the mechanical limits of some of your gear. You've built quite a rig! Keep living the dream you two!

[@CasperRc81]

You won’t see .010” especially .004” to just look at the housing. Surprised it’s lasted that long. Seems like it’s been a good Jeep.

[@JoshuaEdwardsviolin650]

When you break something in the rear that still allows you to roll, just remove the rear driveshaft and put the vehicle in four wheel drive (front wheel drive in this case).

[@tommygarrett2519]

You all prolly dont give a shit but does anyone know of a way to log back into an Instagram account? I stupidly forgot the account password. I appreciate any help you can give me

[@kasonkyrie1914]

@Tommy Garrett instablaster =)

[@tommygarrett2519]

@Kason Kyrie thanks so much for your reply. I found the site on google and I'm in the hacking process now. I see it takes quite some time so I will get back to you later when my account password hopefully is recovered.

[@tommygarrett2519]

@Kason Kyrie it worked and I actually got access to my account again. Im so happy:D Thanks so much you saved my account!

[@kasonkyrie1914]

@Tommy Garrett Glad I could help xD

[@jeffro8373]

That's saying something for all the skinny pedal time and all the Kevin's that something finally broke LoL, love you guys

[@lonniet.2816]

Cool all the upgrades and the STEPCHILD getting fixed so fast! Looking forward to whats coming up!! Stay safe you two!!

[@philiphannum4211]

Wow, when I saw the title I was a little concerned that the people in the Jeep were broken as well. Glad to see that everyone involved is OK. Broken parts can be replaced. I can’t wait for the next episode of Life With Kevin and Britney!

[@Grumpy_old_Boot]

Yeah, looks like it's occupants are allright .. though we didn't see Jelly Belly !! *_dun-dun-duuun_*

[@patandjessicasjeepadventur3227]

Big props to Northridge4x4 for helping you guys out how long did you guys have to stay in town

[@jasonallen6836]

21:50. That is how you break stuff. Hammer down.

[@alvinn.5591]

Thanks so much for the coupon code at Northridge4x4! I know a lot of us appreciate the promotions you put out for us, so please keep them coming!

[@UncleElroy21]

The wild child is coming along nicely! Cant wait to see whats up next for the StepChild. Cmon 40s!

[@quinnmortensen1415]

Glad you got the Jeep fixed. I have gone through 2 sets of rear gears on the YJ due to driving in 2 low in Moab. I now have a Dynatrac axle. Bigger is better.

[@quinnmortensen1415]

@@Future-Preps35 I ran a non c-clip 35 in the YJ for 8 years. It was trussed with hard shafts. It is now in a friend's YJ. I ran 35's, and so is he. I bent the original 35 doing Rusty Nail.

[@charles_wipman]

Sorry about that axle; for what i've seen the streets and highways of L.A. are pretty chaotic and crowded, so drive with care, carry a gun... and be safe guys. That mini lake looked great, but i hate the mountain water, it's cold as hell; if you ever come to the N of Spain go to 'Los Picos de Europa', i think you'll like it. I'm still waiting for a hoddie with a front zipper and the logo on the back now that the summer it's here. Keep having fun guys and be safe on the road!

[@traviskorda3262]

First couple mins of video before I see your plan...trailer it to Dynatrac!

[@PhatboyHD88]

Travis Korda yea i see Dynatrac video coming lol.. kevin needs it with all the hammer down send it turbo action🤘🤘🤘

[@laynesellers]

Just switch it to front drive only when the rear blows out.

[@jaromwolcott4493]

That is a tough break. I can’t wait to get home from South Korea on Wednesday. I pick up my Jeep from Dallas Off-road with new gears and a rear locker installed. I am looking forward to my trip through Colorado, Utah and Idaho in July. Planning to spend a couple of days in Moab the last week of July. Looking forward to the big announcement and the see where you go with the upgrades.

[@Grumpy_old_Boot]

Nice, lockers makes such a big difference. :)

[@LiteBrite]

EDIT: The Promo Code for Northridge 4x4 is for “UP TO” 20% off! My selective hearing apparently missed that part. I’m sorry for any confusion, guys! So depending on what you order, the discount could be “up to” 20% off. 😊 LITE BRITE NATION ↠ Patreon - www.patreon.com/litebritestudios ↠ Merch - www.litebritestudios.com ↠ Stickers - bit.ly/2Tt20Wh ↠ Amazon Store - www.amazon.com/shop/litebrite ↠ Facebook - bit.ly/2HatSru ↠ Instagram - instagram.com/litebritestudios

[@Stuka87]

So... Dynatrac is in the LA area ;)

[@gen1c8rs88]

39x13.5r17 BFGoodrich KM3 for the next set of 5 tires after the Milestar Patagonia MT tires wear out.

[@bubba88958]

When I try the north ridge coupon code, it’s only good for 5% on some items?

[@LiteBrite]

Caleb Robinson Yeah, Sorry, apparently I missed the part where Kevin told me it was “up to” 20% off. 😅 So it depends on what it’s used on!

[@kjhaglfjhgfasd]

Well, breaking leads to upgrades! I snapped my dana 44 years ago and replaces with dynatrac 60 rear and snuck in a daynatrac proroc 44 front. Never had any issues again. RCVs are also amazing.

[@wolfgangnebel2673]

Nice vid again! Seems like you reached the limits of your rear axle. It's time for something stronger. And Brittany, I have to tell, you simply are a beauty! This one offered very respectfully ...

[@theslimeylimey]

That was an interesting video. It been fun watching the evolution of the step child and your channel.

[@Mike-go5pg]

It hasn't been very long since you installed a turbo on your motor and the drive train is feeling the extra pressure, it is time to beef up the rear axle to absorb the power and take the abuse you give it on the trails. The threads are twisted on the axle shows that rear end can't take the power you are sending to the rear wheels. I put a posi in my Jeep Grand Cherokee when the rear end gears were making noise and I love a posi in any vehicle. I am glad you weren't stranded on the road with a broken axle, good luck.

[@georgeforsyth5741]

Sorry to hear about the broken axle, but it was only a matter of time. Factory axles and housings are great for normal driving and lite to med wheeling. As soon as you go up in tire size and gears, they will fail in time. I went from stock 30frt/35c-clip rr axles on my YJ after many years of med to hard wheeling running 36" IROKs, after breaking both axles in one day, I upgraded to Currie ROCKJOCK III 1-ton axles frt & rr on 39 1/2 IROKs and have to say the axles are my last concern now as far breaking goes. Yes they are pricey but well worth it. In case you are wondering how much they cost. My front axle came to $10,815 not counting install. The rear axle came in at $5,473 not counting install. The basic order specs are below. Other than the YJ mounting pads, these axles would work great on your broken StepChild. Someone needs to setup a Go Fund Me site for you two. As always, love the video and happy trails. ORDER CONFIGURATION: Model: YJ Year: 1995 Engine: Application: Offroad RE Dimensions - Overall: 66.875 Pin Offset: Brake Space: Drum Rotor: Brakes: WWD New Style AXLES HOUSING THIRD MEMBER Style: 1 Ton Front Type: Extreme Spline: 35@60 Deg St Bolt Pattern: 5 On 5.5 Inch Stud: 19/32 Register Diameter: Driver Axle: Passenger Axle: Style: RockJock III Front End Type 1 Ton Inner Brackets: Pads See Notes Housing Width: Driver Housing: Pass. Housing: Driver Tube: Passenger Tube: Style: D60 Reversed (60R Ratio: 5.13R Spline: 35@60 Deg Std Differential ARB (AL) Yoke: 1350 Std (K) Case: Reversed 60 (V) Pinion Support: N/A (X) ORDER CONFIGURATION: Model: YJ Year: 1995 Engine: Application: Offroad RE Dimensions - Overall: 66.875 Pin Offset: 0.94 Brake Space: E 2.5 Drum Rotor: 0.188 Brakes: WWD New Style AXLES HOUSING THIRD MEMBER Style: Performance Type: Tapered-T&E Spline: 35@60 Deg St Bolt Pattern: 5 On 5.5 Inch Stud: 19/32 Register Diameter: 2.800 Driver Axle: 31.4385 Passenger Axle: 33.9355 Style: RockJock III End Type 9+ Torino/LB Brackets: See Notes Housing Width: 61.499 Driver Housing: 25.8035 Pass. Housing: 25.6755 Driver Tube: 0 Passenger Tube: 0 Style: D60 Reversed (60R Ratio: 5.13R Spline: 35@60 Deg Std Differential Detroit Locker (DL) Yoke: 1350 Std (K) Case: Reversed 60 (V) Pinion Support: N/A (X) Currie has great support and customer care.

[@wescourtney1510]

Thou, I have a 2008 JKUR, I run 5.38 gears, but, had them cryo-dipped. Don't know if that helps or not.. Figured it wouldn't hurt.. Rear housing is also trussed.

[@josef859]

Well thats a bummer,but also a good thing,because damage leads to upgrade. Try to call fusion4x4 they had a bunch of axles to choose give it a try on hybrid dana 44/60

[@ww2069]

Sweet new upgrades!!! Love it (Brit don't teese Keven about his bent rod!!! It's just a guy thing!!!) LOL haha LOL Again love the vids Keep it up and stay safe.

[@rsbrehm]

It would have been caused by the Lockers. When both tires are spinning and one suddenly catches, all of the torque transmits to the opposite side. That's why the damage was concentrated on the right-side. The heavy tires on the right were spinning and the left wanted to keep going but it couldn't because of the ground. The right side still had centripetal inertia. I think that normally just spiral fractures the axle shaft or shatter's the gearing. Looks like you got a little bit of both.

[@merczeph79]

All that could happen with an open diff, even more likely since when one tire spins, with an open diff, it goes twice as fast as when you have a locker. Then when it grabs it's even more likely to break shit. Lockers are better 90% of the time offroad

[@damham5689]

As my Mom always saids. " Starts in fun, ends in tears" But we always said back when I still was into off roading. " you know your having fun when something breaks" While Im quoting may as well give my dad a shout out for his favorite back in my 4 wheelin days "4 wheel drives are the most costly beer guided missiles known to mankind"

[@boughtnotbuiltoffroad7784]

Dam Ham hahaha

[@dougharlow6037]

Dynatrac is the way to go. One good thing is. once you break something, normally you replace it with something better? Some states require that you need a windshield wiper of some sorts to be legal? Good Luck. Thanks

[@trefunk3743]

Have hard hard wheeled my 89 YJ for years, have to press new axle bearings on every 3 to 6 months from the abuse, if you let them get worn you'll bend or break shafts and mess up your gears, something along with your hubs you should be checkin before every good beating you're gonna dish out, and after before the ride home hah Look forward to seein ya what got next

[@OVRLNDX]

Awesome guys!!! Love to see you having fun!!

[@buddythejeepdog]

Good video. Northridge 4x4 has always been my go to for Jeep parts. Best prices and great service.

[@Scott-1903]

After another parts supplier botched my order for a front bumper I found Northridge 4x4 have been buying from them since then, great people.

[@drayarm]

I broke 2 teeth off in Daytona (Spring Break 1990) Drove it for a week around town and then drove it home to Texas. Don't be gassing on it and peddle it (break and gas pedals. Don't let your gears slow you down) letting your gears do the work will end up breaking off the other teeth.

[@chuckzechman1497]

I guess those east coast trails were tougher than you expected? Safe Travels and God Bless!

[@davidbtc295]

Your twisted shaft splines is not the wobble. I’ve twisted plenty they don’t wobble. It’s a bent axel flange !!

[@PreonEnergy]

I've had a twisted spine and had no wobble, and a bent axel shaft with wobble.

[@ronstobaugh]

The "bent Flange" is sometimes bent from leverage, and sometimes (often) from twisting the shaft, not just the splines. As the shaft deforms past its limit, it pulls the flange in. Both give you the same symptom, without scribing the shaft when new, no way to be sure which is the culprit.

[@baron6271]

That's HARDCORE wheeling!!! If you broke it you guys did it RIGHT!!!

[@JP-ic1fi]

How great was Carbon Off Road to take care of you guys. I currently run their chromoly axle shafts in my JK...great products, great people!

[@danievanrensburg1168]

So remove the rear driveshaft and put it in 4H. Drive to LA in Fwd. (Not sure if the JL transfer case is sealed so you can do this) Ive done this on my TJ

[@Grumpy_old_Boot]

Yeah, but they're towing as well, not sure if that makes a difference. Anyways, as the video showed, they came up with a solution. 😃

[@CasperRc81]

Ya I pulled off those front fairings but it leaves your coolant line exposed

[@ralphcasados8862]

Beating up the Step Child that's the way to roll, gotta watch them big ole rocks

[@joshbuck5877]

That was awsome they saved you guy's woohooo. Can't wait to see the next vid 👍🤘

[@runeandrebergtun8892]

I'm so amazed about you guys attitude . "Yes!!! we finally broke something!!!" I'd be very bummed lol.

[@boughtnotbuiltoffroad7784]

Rune Andre Bergtun haha

[@LiteBrite]

Rune Andre Bergtun Honestly, it’s really impressive that it took this long for something to finally give! 😊

[@lesszabo5625]

Bummer that you had breakage, but it was bound to happen the way Stepchild gets used on trails, and it's been pretty darn reliable. Those shops in Utah and the others you've been to are definitely a great group of people. I'm guessing that since you're going to L.A., EVO offroad may be a stop? Looking forward to the next video, safe travels.

[@mattclark8483]

Welcome to what those of us who live on the east coast have to deal with as far as offroading damage, lol. Always a good time! :)

[@pattyariss007]

Great Video Layla loved you Brit‼️❤️😂 Kiwi you were Amazing 😉 Layla was very happy 😃 where is Jellybean 🐶??

[@grimdbd]

Been there before, that axle was pretty close to busting. I broke the axle on my TJ by trying to bounce over an obstacle on pritchett canyon.

[@myanime101]

I don't get why they didn't go with Dana 60s when they swapped the front, 38" tires on locked diff is just as hard on the axles as 40s

[@HuevosAzules]

I don't know if you guys are still in the area, but if you are you should definitely stop by Zion national park. Not much for offroading but it's my favorite national park. Absolutely beautiful!

[@TheRightLine]

Those massive 38's and heavy throttle I'm sure didn't have anything to do with it. Ha ha ha! Have fun and be safe guys.

[@chrispomplun1511]

So 37s on 20s with a jlu sport mall crawler, wouldn't work ?

[@jaredmonez6373]

I’ve spun my carrier bearings 3 times on 2018 JL with LSD, it’s common on that but not on Tour Dana 44 with lockers. Best of luck getting back on the trails soon

[@merczeph79]

Maybe due to heat build up from the clutch packs slipping offroad. My TJ with the factory lsd had some cooked beearings when we pulled it for the grizzly locker. That was from treating it like a real locker offroad... ha

[@cooperryan6948]

Are you Getting a Jeep gladiator in LA

[@onefastcyclist]

3 months ago the stepchild got the "best upgrade yet" for the front diff. Guess the rear felt neglected //;-(. Good thing you guys have a spare off road 4x4 with the side x side which was made even more versatile with street legal upgrades. However. I'm envious of your ability to keep finding GREAT shops when you need one!

[@robertmarez3195]

Love the longer video...unfortunately its @ the expense of the Stepchild. Good thing you found out the gears in town with a great shop and not in the middle of no where....wonderful how everyone comes together to help out (shop, commercial businesses)....Wildchild coming along nicely....where's Jelly 🐶🐕......great fun in the outtakes....looks real fun....Safe travels

[@christinapittsley786]

Big bummer, glad you figured it out. Love the fun nrw speed stuff!

[@FearlessTrailhawk]

This feels like me right now...cept it is lingering issues from a hard rear end collision and the fact i got it lifted since and nobody wants to actually diagnose it...they just blame the pre-existing condition on the lift...and nobody makes aftermarket parts for what i'd need to replace anyways because yay 2019 very niche market!

[@ES-lh1tj]

All that fun ain't free! But at least you had fun!

[@brcc8208]

Head over to EVO. They took a Gladiator and dropped in custom Dana 80 axles and their own 4 link suspension components. I believe they're selling it in kit form now.

[@bigbee22011]

Northridge saved us too just a week ago! They really are the best!

[@eliarrington2898]

Stepchild finally got a boo boo

[@Whiteandsonsgarage]

Eli Arrington the first is always the hardest

[@BadmunkyWRX]

Pull rear drive shaft out. Run the Jeep in 4wd and its now a FWD Jeep! LOL We did this for 6k miles after the rear ring and pinion did the same thing on us.

[@stickyleg6541]

Love the side by sides new name. Perfect fit.

[@Verteidigen]

Keep up the good work! Love the vids

[@2cents422]

You can't go wrong with 60s front and rear. They are big, they are heavy, they are strong. They also will lower your COG a tiny bit.

[@jamesennis4446]

I can smell the diff grease. Loved it, thanks for the video!

[@ameyers67]

In Utah, you can drive ATV's on a HWY as long as you don't exceed 45MPH. That doesn't mean you can't ride on a HWY that is 55MPH, you just have to drive to the extreme right side of the road. Freeways on the other hand are not legal. Have Fun!

[@jackstandjeeper]

40s and my driving style killed my rear gears with a stock 3.8 and 5.38 gears. Pushed me to do junk yard one tons.

[@jackstandjeeper]

@Skull_n _Bones80 overkill on a dana 44 yes, but it ran 100mph no problem and had all the torque I ever needed. I also have a manual trans

[@xTinBenderX]

Diver mods are always the best mods!

[@pennypackmtb2542]

Another great Video! Yeah, the East Coast is tough! You play, you pay.

[@johntamulonis4626]

Awesome video!

[@OntarioFreshwaterFishing]

A couple years ago I heard a weird noise in my rear end while out wheeling. A few days later leaving work I broke a few gears off my ring and pinion, drove home in 4wd, then pulled the rear shaft and drove around with only front wheel drive for a couple of days while I waited for gears.

[@carrieanntipton8308]

Definitely a ouch. Next upgrade if you can't afford the 60s is 8.8 Ford. They're stronger than Hades I just dropped one into my grand you have to remember that they're used in pickups 1/2 tons Ford Explorers vans and they has stood up from the 80s on up. Just a suggestion we use them in our rock crawlers another awesome video KZbin

[@rimay5393]

So there is a break in period on the Yukon Gears, that specifically goes against towing fir so many miles. How did you do the proper break in?

[@LiteBrite]

Ri May A week of about 20 min highway followed by full cool off. Don’t worry, we aren’t towing anything to LA. Not even because of the gears. Lol The Stepchild has bigger problems to worry about.

[@rimay5393]

Great! Enjoying your videos. Doing good job!

[@mikehoffman3690]

You have met some great companies on the road.

[@monkeyman41333]

Ok, I am mechanically challenged. What was the reason for painting that gold coloured liquid on a portion of the ring gear.

[@sw5334]

To check gear mesh and make sure you are getting the correct contact between gears.

[@monkeyman41333]

Thanks. I learn something new everyday🙂

[@fuckareweetribe2279]

heck yeah glad to see you guys at carbon. they are close friends of ours

[@Flyby-1000]

ZIP TIES.... My biggest pet peeve in aviation.... 16:54 CUT YOUR DAMN ZIP TIE TAILS FLUSH... I've reached into instrument panels many of times looking for wiring and my arms come out bleeding looking like they were in the middle of a cat fight!!! I tell all my technicians to use a zip tie gun or flush cut pliers.... CUT THEM FLUSH...NO EXCUSES!!!!

[@azboyd3503]

I've been watching a few of your videos and enjoy them it's pretty clear now that the jeep is way under powered and requires a lot of aftermarket up grades is there any any news on a Deisel conversion with Cummings engines

[@chrism5768]

Driving it to dynatrac in huntington beach ca I bet. Going to need bigger axles with the blowy thing under the hood and if you ever go 40s

[@boughtnotbuiltoffroad7784]

Chris Metz yuuup

[@jeffriley2502]

No surprise here! D60S and maybe 80? 40s coming? We all knew this was coming. I've been talking about this jump for a while. One of the guys in our club just did 60s and 40s on a brand new JL. Just a reality if wanting to do wheeling at that level. Safe travels give a call when in So. Cal. we can go wheeling to Big Bear. Add some Badge of honors to your list. OlllllllO

[@jorgelrod]

All you need to do to get to california is have them pull the Ring gear and drive in front wheel drive to California, that way you won't hear that clacking sound all the way to Cali.

[@TheRspct2all]

Your luck provided content ;-) These hints are exciting. Can't wait.

[@exploderpilot]

Wait till you twist and bend a 35 spline chromo shaft like that... I managed to get both rear shafts and carrier bearings on my JKU

[@Antho2529]

LOL similar thing happened to my truck, I bent a rear drive axle, then my axle gears broke :( had to replace axle drive shaft and 3rd memeber

[@islandtv8087]

Thanks for another awesome video 🤙🏽🤙🏽🤙🏽🤙🏽🤙🏽🤙🏽

[@beefyoso]

holy crap I want that corbin decal.

[@Ajdruck]

Man I know that feeling when you break stuff.... sucks....at least they were able to get you back on the road quickly! Do you ever have a Baja designs discount code?

[@boughtnotbuiltoffroad7784]

Ajdruck I think so but i don’t remember right now. Maybe call them?

[@MRALL4FUN]

Brittany I just love how you say Hurcan!! LOL

[@LiteBrite]

ALL 4 FUN 😩 I sort of guess at it every time. Lol 😅

[@MACzerofourtwo]

That how it pronounced in Utah. 😀

[@pullingtaffyproductions8148]

Looking forward to the next one.. New rear diff in the future it seems🤗

[@Lee-gc2mq]

i was on Dynatrac website they got JL rear Axles 60 front and 80 rear combo set was $18,600. the 60/60 was under 17,000. since you got a front you might get them to send you a rear. and for you guys you need a Dana 80 maybe you can't break it.

[@fergotti]

Man that's all? Can I get 2 sets for when I break the first? Everyone has $20k for axles right? Axles!!!!!!????

[@Tylerjschmidt]

Gotta love Jeep life!

[@aibarra0909]

Is it possible to disconnect the rear drive shaft. And drive front wheel drive?

[@boughtnotbuiltoffroad7784]

albert ibarra you don’t need to disconnect shaft but yes

[@mikerobbins5049]

Hey Lite Brite...... I’m getting ready to buy tires and need an update on you Patagonias...... How many miles now and how are they holding up? Are the getting noisy? Etc etc etc. looking forward to the LA thing ...... what ever it is...

[@boughtnotbuiltoffroad7784]

Mike Robbins all mud terrains will start to wear unevenly on a solid axle vehicle. Best thing you can do is rotate them often. You should get about 30k miles from them. Use LITEBRITE code at Northridge 4x4 for a discount on the tires if you like. They are great tires. You will love them.

[@user-gj6yb2qc7e]

Nice! went with 5.13 on my old jeep tj. You know you been together too long when you both say ahhh at the same time and sound the same. Why does kevin look like a smooth ass maverick wearing sunglasses? I am half expecting highway to the danger zone music to break out :-)

[@boughtnotbuiltoffroad7784]

17 I would so play danger zone if we wouldn’t get demonitized

[@rickw.6382]

Yeah, Wild Child, woot woot

[@rodwood693]

Pull the rear drive shaft, put it in 4wd, and you have a front wheel drive stepchild! 😜👍🏼

[@RyansJeepGarage]

Nothing like a good bust in the rear, am I right?

[@Grumpy_old_Boot]

Ooooohhhhhh my !! Brittany, have you been naughty with Kevin again ? 🤣 Just kidding, we all know it was Jelly Belly and a shoe, hiding under the bed.

[@shortslamn]

A video with no Jelly. Also - don’t be scared of the East coast now.. when are you all planning a trip back? 😬

[@LiteBrite]

Kristian Martinez Jelly was resting back in the room with the cone of shame during this (got spayed a few days before, but she’s doing really well now!)

[@Grumpy_old_Boot]

OH NO .. the cone of shame !!! You know you will have to show her on video with that on ? 🤣 It's an important part of a little doggy's life.

[@bernardob8604]

If the rear fails completely, can you pull the rear drive shaft and drive home in 4wd using the front axle for power?

[@yzfr1owner]

No, cause the axle will still drive the carrier gear into the pinion gear.

[@boughtnotbuiltoffroad7784]

Brett Budnik no. It’s a semifloat a le

[@jasonw4533]

That's crazy guys. But then again all the wear and tear and off road abuse and fun yall went through was definitely worth it though! You guys are definitely getting the maximum out of your jeep. Yall should go help engineer the next gen Wrangler 10 years from now haha