WE FINALLY DID IT!! - Water Cooling the 8K Camera!

Find a Micro Center near you: bit.ly/2QEZrfg
Maingear Element Laptop: bit.ly/35g9DQG
Maingear Element Laptop (Amazon): amzn.to/2SGDJub
Thanks to Thermal Grizzly for sponsoring today's episode! Buy Thermal Grizzly Conductonaut on Amazon (PAID LINK) at lmg.gg/conductonaut
It's finally happening. We are water cooling our RED 8K camera, and it is a beautiful thing.
Part 1: • We TOOK APART an 8K Ca...
Part 1.5: • Reassembling our $40,0...
Check out the tools we used at OhCanadaSupply and enter to win a tool kit! at bit.ly/MWKGiveaway
Try out Solidworks Flow Simulation: www.solidworks.com/Linus
Check out the CAD models: grabcad.com/library/red-camer...
Buy Noctua fans
On Amazon (PAID LINK): geni.us/4qrPAXZ
On Newegg (PAID LINK): lmg.gg/XYT4L
Purchases made through some store links may provide some compensation to Linus Media Group.
Discuss on the forum: linustechtips.com/main/topic/...
Our Affiliates, Referral Programs, and Sponsors: lmg.gg/sponsors
Get a Displate Metal Print at lmg.gg/displateltt
Get a 30-day free trial of Amazon Prime at lmg.gg/8KV1v
Linus Tech Tips merchandise at www.LTTStore.com/
Our Test Benches on Amazon: www.amazon.com/shop/linustech...
Our production gear: geni.us/cvOS
Come see us at LTX 2020: www.ltxexpo.com/
Twitter - / linustech
Facebook - / linustech
Instagram - / linustech
Twitch - / linustech
Intro Screen Music Credit:
Title: Laszlo - Supernova
Video Link: • [Electro] - Laszlo - S...
iTunes Download Link: itunes.apple.com/us/album/sup...
Artist Link: / laszlomusic
Outro Screen Music Credit: Approaching Nirvana - Sugar High / approachingnirvana

[@LinusTechTips]

Check out the tools we used at OhCanadaSupply and enter to win a tool kit! at bit.ly/MWKGiveaway

[@blackhole4106]

Ok Boomer

[@oatmealfanta7347]

nah

[@makunouchiippo2542]

Absolute no one, no even one in the whole universe, lets water cool a red camera, but first lets buy a machina station for it

[@profane1986]

Stop grimacing you....

[@Rithius3485]

YAY!!!! Congrats new sponsor!

[@neat2014]

*Linus’s kid has a fever* Linus: lets water cool him

[@envidygaming3990]

Technically speaking we are already water cooled. I know it's a joke, just wanted to throw that fun fact in.

[@ToasterWithFur]

@@envidygaming3990 36°C is way to hot, the body just thermal throtels. Get that temp down as far as possible, unless you got nand storage, it likes to stay warm for optimal performance. A good way to cool down while it's Winter is the local duck pond. Just Chuck the Bad boy in and see the temps fall

[@boomdaus]

clearly, a new sub that never saw whole room water cooling. actually now i feel old that i remember the moving into the old house

[@lirosphere956]

Use ice instead of coolant so its SUB ZERO

[@framerate3x3]

Kids waterproof, just chuck him into a dry ice pool.

[@the_danksmith134]

1 year later: "So one of our $100k cameras stopped working" Edit: *1 week later

[@alil1294]

I'm happy this finally happened!

[@moshimoshim0shi6]

Bruh

[@ians444]

@@alil1294 It's been so long.....

[@oddjobkia]

Technically due to all the extra tools machinery etc it’s more like a $250k camera

[@QurttoRco]

ehh with the amount of hours they are being used wouldn't surprise me if one of them failed

[@bjordan1322]

"we water-cooled the RED" LINUS: Time to retire

[@poizonfreak9967]

Lol. Good one Buck

[@JOELwindows7]

Anything: hot Linus: I'm gonna watercool this man whole career.

[@Silent_Shadow]

Stupid

[@jasonbayer2452]

Imagine being one of the 8k cameras recording this just being forces to watch their friend be ruthlessly mutilated then turned into a cyborg

[@The_Keeper]

What you call "ruthlessly mutilated" I call "Upgraded". 😁

[@netcald991]

The Keeper us humans would call what he said, a joke.

[@dirtymike69420]

@Jason Bayer who is that in your picture?

[@DeeSnow97]

the body they used to film this should be renamed to Camora

[@TwoWholeWorms]

@@dirtymike69420 JC Denton, the player character and chief protagonist of Deus Ex.

[@Zero_V0id]

"It's so tempting to just not do the math" as an electronics engineer can relate so much that I feel personally attacked

[@blank-mq8ef]

I feel it even just from engineering in school. Final projects was just taping the 2 pieces and making them at the same time from laziness

[@floridaman6643]

I can see why my engineer teacher told me I’ll lose my creativity

[@FU-Utube]

Same mauricio. It's more of a "feel" for things lol

[@flyingtentacle7631]

Right sure, because you have to be an engineer to not do math. I swear, internet engineers say some of the least intelligent things you will ever read. As a KZbin comment engineer, I don't approve.

[@tchgs11zdok15]

@@flyingtentacle7631 😑🙏 *boy*

[@UItEnthusiast]

Linus, 2021: "Today we'll be straight up dunking our entire studio in coolant"

[@mysteryfluffy8853]

"Water cooling our cars!!" That's the point.

[@Stormkez]

kzbin.info/www/bejne/mGnFfaedbq9khcU

[@kreisien]

AC?

[@danilolimadossantos1]

@@kreisien If it's water cooled, than it's chiller AC

[@joshuaquetel2781]

i mean i just watched him water cool air cooling so

[@adecree]

"That was my nickname in college" *pauses to rethink everything he knows about life* WHAT 😧

[@MrDSimba]

"Final hole here"

[@cwill2127]

I lost it then

[@01eocoe10]

Pro tip: Wearing gloves is a great way to get your hand pulled into a sander - A Shop Supervisor

[@jayar7057]

Read "a shop survivor". Kinda fits too

[@4ohf]

It's also a good way to get wrapped around a lathe or a mill ... do not recommend.

[@lucasimark7992]

Yeah that made me cringe sooooo hard.

[@takeshikovacs14]

@@lucasimark7992 Same. I literally screamed and paused the video to look for the comment.

[@post-leftluddite]

And he was using the "up side" of the sander too instead of the down side....anyone who is professional tool user like myself must be cringe watching LTT videos....I know I do whenever they use tools

[@MrFloRolf]

Can't wait for "WE FINALLY DID IT PT. 2". That's some top notch bait right here.

[@Sausketo]

ikr

[@steven51278616]

Just wait it has a part 3....

[@battlebunnykai2295]

In all fairness it did take a year too make. lol

[@jonaslinter]

@@steven51278616 Well the Video right here is Part 2. Part 1 is taking the camera apart. Then there is the reassembly Livestream. Part 2. Is the construction of the Waterblocks etc. Part 3 is assembly and testing

[@aaronrobinson2121]

Yeah that really needed a Part 1 in the title. I get it's a long project and might take multiple parts to do it justice, and I'm fine with that. But you need to make your intentions clear.

[@Georges3DPrinters]

3:05 and I died laughing. So many shop class memories popped into my head over this.

[@SirNarax]

"I wish that life had Ctrl+F" big true there.

[@dumpsterdawg]

Alex: "Have you ever used a mill before?" Linus: "I haven't".........now lets water cool the f***k out of it.

[@777anarchist]

Watercooled DRO next.

[@Speedy2222]

as a machinist it was very painful to watch this

[@peniku8]

@@Speedy2222 same lol The first thing I thought when seeing the "edge finder on the cnc router" idea was "it's gonna blow up" 10 seconds later "it blew up immediately" lmao

[@saulekaravirs6585]

There is more to it then just guessing. use a machinery hand guide. It has all the information you need to calculate the proper speed and feed for the material and bit you are using. Don't just guess. www.amazon.com/Machinerys-Handbook-29th-Erik-Oberg/dp/083112900X

[@Speedy2222]

@@peniku8 I sent alex a pm on the forum months back asking if they needed help but " he didn't need any" at the time. i'd love to help them out.

[@morgan1168]

Linus makes the RED bigger and heavier... Camera operators...."Aw C'mon!!!!"

[@James-mahal]

Hey it means that with this heavier modification, the camera operator will have the ability to haul about the heavier mass for longer periods without the red flashing heat warnings and shutting down like it's known to do with lengthier shoots

[@producerevan88]

they're not terribly big to begin with, and really also not too heavy either. And as other homie said, these things are known to give you a good ol warning that it has overheated and you gotta wait a while... if this can keep you from having to switch cameras or stop production and save time, I would take that over it dying every 40 minutes or so on a warm day.

[@janludwig7286]

@@producerevan88 Or just use an Arri, they never overheat.

[@James-mahal]

As @@producerevan88 said they don't weigh as much as you think, the riging, lightighting, lenses, add-ons to support the weight of said lenses with motorised controls, and supplementary Batteries, that's where the weight is, with one of there "backpack" back mounts a camera operator really won't mind the extra 1.5kg at most

[@harrygibus]

and now they get fewer breaks to let the camera cool down.

[@redsquirrelftw]

I've been looking forward to this for a while! Man the things you can do with machining and the right tools, seeing stuff like this makes me want to get into it. :D

[@LaurenceGrey]

Love this, way less scripted, Alex doesn't have to act so he just seems like him. A genius with all the tools he needs.

[@squareplays5510]

Love the more maker-focused content. Honestly would love more content like this.

[@flawlessvic]

They bought what, $50k worth of shop supplies and machinery? Let's get genesis projects moving!

[@oyen9476]

Yeah they should make separate channel for custom diy solutions

[@sarahrau1441]

I think this is entirely why we haven’t gotten a lot of it. Between everything else Alex does, he’s likely been occupied with it for ages. Now that it’s done, hopefully we’ll get a lot more.

[@themonroe654hd6]

PBMS123 Yeah but like actually teaching someone to know what they’re doing takes money, time, and other useless things LTT can’t be bothered to actually do. It takes away from the sweet, sweet ad revenue.

[@nicolaswinter8578]

@@oyen9476 No. They already have to many channels. just watch if you like or not. No one is obligated to watch every single video or like it

[@JoshLyons01]

I'm just going to go ahead and watch this a few times to encourage them to keep using the shop =)

[@AG.Floats]

They are going to keep using the shop... They spent tons of money on it.

[@Banditxam4]

@@AG.Floats that's nothing when you are Linus 😂

[@PeachIceCreamy]

I'm Bulking I mean it is something even when it’s Linus, he still doesn’t like throwing money away

[@marcoschwanenberger3127]

Please don't. They way there are handling these machines means that if they keep using them, we are gonna see videos with fingers and other body parts missing.

[@ChainFire13]

This is definitely one of my favorite projects that I have seen so far, love it

[@vanok22]

When you can't find your phone: "I wish life had CTRL F"

[@Griggsbygriffindore]

vanok when you need to ctrl f for a job

[@mustpaike]

yeah, when you say that, i don't think you need a ctrl f for life, what you need is an embedded AR solution with with full history. You look at a desk "your phone was here 432 days ago." Select 'phone'. Seach 'current location'.

[@vanok22]

@@mustpaike so basically ctrl f but what you would actually have to do

[@MaxCE]

Well you have an F now you need control. F

[@vanok22]

@@MaxCE :/

[@Kolton88]

Alex - "I wish that Life had Ctrl+F" Agreed. I wish that Life had Ctrl+Z too.

[@bohrasdf]

Ctrl+Alt+Delete is all I need

[@madzusse]

Alt+F4 would be nice, too.

[@paulunga]

F5 and F9 would be nice.

[@jackytsz]

That should go on a T-shirt though

[@AyedYoutube]

i want to alt+f4 myself..

[@hamsandwich284]

Talk to just say I've been watching you guys to quite a while since back in the kitchen and it is sick to see how far you guys have come, making your own custom parts, really cool XD

[@mackan072]

I know that some people might not appreciate how this channel has developed, from the more consumer-centric, everyday tech review channel, to become a channel that has a more playful, silly and simply 'just because' approach to tech in general - but I've really come to love it. Channels such as this are the reason why my tech interest grew some 8 or 9 years ago, and they're the more likely than not the driving force to why I decided to study engineering in the first place.

[@Maximusrex4575]

Linus: Gets mad when staff buys a item to review that is $5 more expensive due to the color Also Linus: Build a manufacturing plant to water cool a super expensive camera.

[@AsbestosMuffins]

he did say at some point all of this was so they can build more watercooling/heat sinks

[@redracerb18]

Having the supplies to do anything is quite usefull. They could use channel superfun as an art channel.

[@SportbikerNZ]

One wastes money, the other makes money. Business 101.

[@EssenceofPureFlavor]

Can you please explain to me what functional purpose colors have?

[@redracerb18]

@@EssenceofPureFlavor identification

[@ZachD555]

This project is incredible, I can only imagine how much this costs in labor. Thanks for doing crazy projects like this that no other channel would.

[@rododendron85]

Alex knows everthing, he's machining, does electric work and makes projects in solidwork. A one man orchestra.

[@userauthentication312]

This is some next level stuff, so many different things to test/learn to use.

[@ollie3503]

After all these years I finally have water cooled them all.

[@mackovikmartin]

Always.

[@jthoward]

Not the TI-84 yet

[@gamemasterljr1]

"Uhh" - alex 2020 using what is one of the best segways to a sponsor ive seen.

[@gamemasterljr1]

@@nikolahajdic8952 i could change it, but i wont

[@nickload13]

@@gamemasterljr1 I respect that

[@samael4550]

Nikola Hajdić honestly never knew that, thanks 👍🏼

[@MyCoolStrawSir]

He has been my favorite besides riley

[@baumkp7027]

@@nikolahajdic8952 Thank you very much! I was so confused with what they say all the time. Actually I ended up thinking it was an inside joke that I just don’t get because I’m late to the show.

[@Hortifox_the_gardener]

Awww - the little heatsink at 2:00 minutes is soooo cute. Look at the tiny thing with it's two heatpipes. I want this to be an aftermarket solution for X570 chipsets and VRMs.

[@c100bb]

finally, happy to see you finished this project :D

[@TheGman901]

Linus at home: "Honey I'm gonna watercool you, then i'll watercool the kids for better performance"

[@mohamedchahban4127]

No he will waterheat her😂

[@johnmcmenamin7692]

More like jayztwocents lol

[@leestons]

Well, he did fill her with liquid...

[@joshbrown811]

Everyone: Reviews the 5600XT Linus: "We water-cooled a camera!"

[@naufalap]

soo is the option still 1660 super?

[@ioioiotu]

5600XT is booring.

[@dookieduuk9686]

useless gaming pricks, throwing their money away to degrade and dry off their fucking brains plus making the gaming industry a stable money pumping machine

[@tougs]

@@naufalap 5600 XT. It's basically a bit underclocked 5700

[@thehasinhafiz]

Correction: A $50000 camera*

[@Mag-ls2zs]

Such a brillant and huge project!Huge thumbs up to the team!

[@SR20DEBT]

God this video makes me really miss working in my old machine shop, i love doing that kind of stuff. Its so satisfying building something cool like that out of raw materials

[@SR20DEBT]

Its similar to cooking but a lot more dangerous 😂

[@parleseniortv2685]

What happened now ?

[@ValentineC137]

Alex: "this is mission critical so I'm not gonna mess about doing it fast, and I'm just gonna file it down" Also Alex: *_messes about doing it fast and cracks a heatpipe_*

[@marcoschwanenberger3127]

Facepalmed really hard at that one. There are so many good ways to remove these without any damage.

[@swimseven77]

*gives up after three passes with the file*

[@Cleric2g]

@@marcoschwanenberger3127 good old angle grinder.

[@Hoch134]

Filing would have taken an hour and it would have been done. Also, if you're using a sandpaper and move the object instead of the tool, you might be faster and more accurate.

[@woldemunster9244]

And fake Dremel would make it an easy project without damaging anything, these guys have no hand-eye cordination or brains, just money/sponsors...

[@Agsotro]

Watching Linus being a newbie at doing something I'm qualified to do makes me feel a bit smarter. Precision engineering is an art.

[@allstarwoo4]

Until something seizes and your forced to bring out the hammer.

[@Cleric2g]

feel the same way when he has to get Bryan to do something because linus is scared of anything above 50v.

[@Time4Technology]

Until the mill catapults a part through the shop and someone ends up in hospital.

[@Agsotro]

Okay fair enough, It's both a brutal and beautiful art,

[@aserta]

Hey, classical music used cannon blasts to create sound. Classical music is art, so hammers are ok.

[@lorave420]

This is GOLD quality content people, right here

[@chattymatt]

Why must you make us wait any longer! Seriously though, I really like to see how deep into this rabbit hole you guys went. I can't wait to see what other videos come from work done in the 'Machine Shop'.

[@CarlosSanchez-en6mr]

Linus: “We finally water cooled the RED camera!!!” Me: Watches the video Me: So that was a ******* lie!!!

[@aikatheshibainu3994]

He could have added part 1 at the end..

[@Lambda_Ovine]

No. They did, they just not showing us... yet.

[@TonkarzOfSolSystem]

@@iamaduckquack If you think this is clickbait then you've never seen actual clickbait.

[@HowDareYouu]

BS from LTT

[@egomatthisum]

Aika The Shiba Inu part 2

[@Vatharian]

Alex: "I wish the life had CTRL+F" - I felt that.

[@Lukica555]

@No_Mercy CTRL+F is used to find items in for example webpage or document. Not sure if you are trolling or serious btw

[@shamboozler566]

I wish life had a ctrl+z

[@d4nyll]

I wish the life had Alt+F4

[@davidbarnhoorn6241]

@@d4nyll it does though

[@JosH-oo2en]

I miss this episode is super good the amount of effort put in it.

[@josephbounauito5421]

I love watching them make this kind of stuff.

[@xxdemisucksxx]

So we already know who's gonna be in the next episode : Things get sexy - Riley Things get dropped - Linus Things get wet - Riley

[@thalente8074]

Anthony

[@tedtrench8487]

Thalente Mzulwini yeah. Wtf happen to Anthony

[@xxdemisucksxx]

Things get wet when things get sexy

[@74C50]

Alex is so great Infront of a camera, looking forward for more "dumb?" Stuff!

[@tejbruhathb9064]

all the hard work finally paid off

[@josephsager9425]

I am so so so so happy to see Alex in the shop! After the shop equipment purchase video it seemed like Linus never mentioned in-house fabrication again, Alex didn't seem to be showing up in videos, and in fact they had a few videos like the Hack Pro in a Mac G5 case where they seemed to have outside fabrication. I was really worried the shop got scrapped or Alex quit or something, so I'm so happy to see him working in the shop and to find out that this has been going on for the past year.

[@joshua_lee732]

Some recommendations from a apprentice machinist 3:01 Using a sanding belt on a block to do what a grinding wheel would be INFINITELY better (and cheaper) at? 6:00 If chips are a concern just setup an air blast to keep the project space clear 8:00 The bridgeport wouldn't been a far better tool to use for the task, you're over engineering it with the router. It's much better to do all that by hand and mechanical stops. 12:00 Remove the handle before you hit that damn button I've had a few experiences with handles flying off the machine (since they're designed to be removable) 13:40 You cutting WAY too deep. You want to cut shallow so you have less wear on the bit. Less wear means less heat build up, which means your project stays cooler and warp, less. You also go through a lot less bits that way 15:45 What did I mention earlier? 16:20 Welcome to being an school machinist 18:50 Yep that's an engineer at work

[@chrismayfield916]

"It's so tempting to not do the math..." The life of a true engineer

[@clickbaitpro]

Lol 😂

[@TheN8ism]

How does the old saying go? Measure never and cut until it fits?

[@lars7935]

And every technician will hate you for not doing the math and screwing up. But we will also hate the engineers for trusting the math and not checking themselves so...

[@TheN8ism]

Lars you must not be either because it was just a play on words. “Measure twice cut once.”

[@kibels894]

You know, that's pretty amazing a media production company has a mechanical engineer like Alex.

[@E69apeTheMatrix420]

Its going to be 10,000,000 subscribers day! Congratulations you work very hard and truly deserve it. Keep it up:)

[@Fokvd]

Next Ltt video: Water cooling a water cooling system.

[@-.2..]

water cooling a pump

[@Kasrasfriedchicken]

Water cooling thermal paste Oh wait

[@cain7925]

water cooling the water cooler of the water pump.

[@hiimapop7755]

*Aight, it's big brain time*

[@benedekfodor269]

U are a genius

[@facundoballantines3005]

Sound Engineer: Hey Linus! How much bass do you want me to EQ in Alex's voice record?? *LINUS: A S T H I C C A F*

[@chaython]

They actually up the bass to make linus not sound like a screaming little girl

[@facundoballantines3005]

@@chaython hahahaha so true ..

[@omegawii]

Alex is probably their MVP, literally. He could probably work anywhere he wants in the future after all these videos.

[@PixelGod240]

Plz plz plz more of this! I FN love this content! I do Gunpla modeling and I use a lot of micro versions of this equipment and this is sooooo fun/cool to watch

[@Marzec309]

IR camera trick, when dealing with shiny surfaces. You can add a light coat of satin black paint. This raises the emissivity of the material. The IR camera then can see it more accurately.

[@9inchsradius]

Masking tape works too

[@Sgtpeterenis]

Wouldn't painting a heat pipe mess with its thermal capabilities though?

[@Marzec309]

@@Sgtpeterenis Short answer, technically yes. With heat pipes you wouldn't want to cover the points that make contact with cpu heat spreader or heatsink/water block. IR is light (even though we can't see it with our eyes). So when you point a thermal *Camera* at a reflective surface. Not only are you see the IR light it's emitting bit your also seeing IR light from the room reflecting off of the surface thus skewing your readings.

[@Sgtpeterenis]

@@Marzec309 oh yes, I'm aware why shiny things and ir cameras don't work together that well. I was just wondering whether paint would have a big impact on heat pipes, though I guess you could just remove it again anyway. And I just remembered that laptop heat pipes are almost always black, so evidently it's fine

[@Deilwynna]

@@Sgtpeterenis laptop heatpipes are generally painted after they are mounted to the fins and coldplate

[@TheFinkage]

Linus really just bought an entire machine shop for a guy that hardly knows how to work them all. LMG is freaking nuts and i love em

[@agenericaccount3935]

Alex needed a home. Good move by LMG.

[@christophermcgrew9871]

"hardly knows how to work them all" is honestly being a little generous lmao

[@marcelwinklmuller5622]

thats pretty much what i am thinking everytime i see alex to stuff, he gets all the toys but dang he needs to take some courses XD

[@danielschroedinger2090]

I really hope they just rented this shit they probably won't use a lot and have no idea on how to operate properly. I love their content, but the way these people throw around resources is just becoming obscene.

[@gierrah]

@@danielschroedinger2090 Nope. It's all their hardware now. But it clearly makes them money. At the very least their other projects cover the fun things they want to do.

[@RiteshRajbhandari-lp]

14:02 Alex actually looks genuinely surprised

[@aidanwhipple2005]

Hey this is something I learned in a milling class but when drilling a hole go through all the bits (punch, drill, and tap) on the same hole then repeat for the others holes. This helps keep the closer to speck.

[@WillyTheMLGPro]

"I wish life had CTRL + F" - Alex Same

[@Kirsty_McKay]

As soon as I heard him saying that I was like "oh man same 100%".

[@robinsuj]

I'd rather have ctrl + z

[@megagamerboyen]

unfortunately we have CTRL +F4

[@TKFeather]

Ctrl + Z is so much more powerful

[@stup1dkid]

LTT 2020: water cooling an ssd card and 8k camera LTT 2025: water cooling earth to prevent global warming

[@rory2663]

Hmm, 2025 is doable! The water is already there, but they're going to need a much bigger chiller.

[@phileurom5933]

Just need some giant heat pipes that go from a radiator in the ocean to a radiator in outer space. EZ PZ

[@JersenMan]

@@phileurom5933 someone didnt do his physics homework

[@vnyggi621]

Or you just put reflective stuff on the ground and you're done

[@ALLCAPS]

The earth will cool itself and heat itself how it pleases. It's a living organism

[@Rockport1911]

Would have never assumed so much machining going on this channel :) Nice effort :)

[@legoNerd01245]

really neat to see machining on this channel

[@Catrik]

"measuring this would be a nightmare" literally only needs a machinist square and calipers. And a depth micrometer if you're really worried about the heights. Considering the amount of money spent on machining tools, having some basic measuring tools doesnt seem too much :D

[@excitedbox5705]

I know right. I facpalmed when he said he didn´t have a way to measure depth while holding the indicator dial. They have a full machine shop and the thing still looks like a ghetto rigged PC mod. It would almost have been easier to machine the whole thing as one piece instead of attaching it to the original and would have had much better heat transfer performance. Would really only have needed a caliper with depth needle on the back. Or could have painted the part with transfer paint and done a print onto some paper. Scan the paper and let the computer convert it to a 3d part by setting the thickness and depths of the hollow spaces etc. routing those fittings through the side of the water block would also be smarter.

[@lars7935]

@@excitedbox5705 It's not about the tools. It's about someone who knows what he does. Not to put Alex down but this is nothing you just pick up in few hours.

[@danwhite3224]

As much as LMG do some daft things from time to time and as much as some people criticise them for a lot of things, you've got admit that some of the stuff they do is damn impressive.

[@raawesome3851]

True

[@OclooBattles]

yup, they do stuff others woouldnt dare to do

[@obi-wankenobi9871]

Well yes, but their occasional fuck ups are kinda expensive.

[@wolfx.2546]

@@obi-wankenobi9871 bookie just writes that off as expense

[@BrieoRobino]

Yeah some of their stuff might be ridiculous and exorbitantly expensive, but at least it's original unlike some channels like jays2cents and paulshardware that just do repetitive PC builds every two weeks.

[@thepatograper2420]

Wow!!! I've been waiting for this video...forever!!!

[@Louis-te7th]

omg this is sooooooo much work for this. Amazing.

[@rassault]

had to wait a whole year to see alex use the shop! throw in some footage when he makes stuff for other projects, will you? its much more interesting than reviewing phones

[@Stanjara]

Reviews sucks the life out of him.

[@cae7896]

2020: water cooled 8k camera 2025: nitrogen cooled 16k camera

[@caleblarsen4967]

only liked the comment bc of ur username

[@ThePineTreesBand]

Wish you guys would have had more footage of this project. Very interesting and It seems like a lot went on for just a 20 minute video

[@Coxxy556]

Watching you guys use manual machines as a machinist is hilarious! I wish i could drop down to the shop and give you guys some pointers

[@-eternal]

"does it really matter how deep it goes in?" "eh, doesn't really matter"

[@RobertGoddard86]

I think they like, just the tip. I go deep son.

[@-eternal]

@@RobertGoddard86 Mom said you can go very deep because you're smol

[@alanherrera5421]

Maravillosa jugada!

[@davisenstarlord6317]

Next time on ltt, Watercoling my staff to increase work productivity and also watercooling my wife cause she get hot when she's mad at me sponsor by ek

[@tonyman1106]

but having a hot wife is the best kind

[@davisenstarlord6317]

GraphicGore yeah but having a hot headed wife is bad too

[@XxPsykosXS]

Damn ! Alex is so lucky to have such a cool workspace man.

[@saikiranj807]

I love the enthusiasm!

[@girraiffe]

"That sounds about right" Looks like they both haven't used a mill before 😂

[@adamdodds6201]

Makes me want to donate my old Tool and Die making books to teach them about speeds and feeds.

[@nicolaswinter8578]

@@PBMS123 Is not cringe if you know even less about. It worked at the end, so I dont get all this comments about people getting mad cuz he is not using it "properly"

[@girraiffe]

@@nicolaswinter8578 A mill does not care that your face is in front of the machine or if your arm is next to a part. It is critical that you at LEAST read the manual, which the obviously didn't do, either. Breaking tools is expensive and power tapping at such high speeds is plain stupid. Before I got my mill I watched hours of videos and read as many resources that I can. Heck, I haven't even used the mill and I can point out all the unsafe and dumb things that they did. Also, the part the killed that wasn't level, (flat as they called it, it's probably very flat just not level) isn't because they didn't properly secure it to the CNC router. You can see this because the parallel is wobbling like it's at a dance party - obviously didn't tap down their part. All were saying is that they should educate themselves before they break more tools or worse a part flies out and hits one of them. Oh and one more thing, they got climb milling and conv. milling wrong. It wouldn't through the part out to the side and you should never have a set up that throws a part to the side, the force should always go into the hard jaw - another saftey hazard. Just watch a few more tutorials on mill basics and they could have avoided these safety hazards

[@philippschafer2124]

@@girraiffe How should that even work? "The force should always go into the hard jaw." What if I want to mill the sides all the way around? The force vector is pointing in four different directions then.

[@marcoschwanenberger3127]

@@girraiffe I absolutely agree. It really hurts in my hearth to see such a beautiful bridgeport mill beeing used so carelessly. "Sounds about right" is a recipe for disaster. They should've looked up the proper speeds and feeds/doc for the material and cutter. Manual feeding is somewhat acceptable, but just cranking it because its fun can be very dangerous as well. Parts/the end mill can go flying and so on. I'm a trained carpenter, not a machinist, but I do have a beautiful old Lathe and worked with different metalworking machines in the past. If I had that bridgeport, I would probably tuck in in to sleep every night. Beautiful machine.

[@EyeOnTheTV]

Shoulda called in AvE. He'd know how to have done this so long as you kept his face on the DL. Plus he's in BC

[@No-mq5lw]

Might as well use his Haas CNC mill while we are at it

[@Astronaut50JL]

Linus and the ‘ol bumblefuck in one video would be a clash of personalities 😂

[@99SuperKiller99]

When I saw the Bridgeport in the shots, I thought that we were in for a treat especial.

[@nmrdkl]

EyeOnTheTV man of culture

[@henrygaraffa5584]

@A. Miran. look up AvE, hes a very good, very vulgar machinist

[@KYBERWERK]

Really awesome style of video on this one. I like it.

[@aserta]

13:09 FYI, that's a reamer bit, used to ream holes (create a 45 degree relief cut in round holes to break the sharp edge and facilitate a nice "funnel" for any tool or screw you might wish to insert in the hole after). You need a center bit. The stubby fat bit that you'll likely find in the tail stock kit for your lathe. I'm impressed, either way. Far less cringy than i figured this might be...if you ignore the potential for injury, as the adage goes, safety third.

[@jasonhalvorsen9767]

*breaks heat pipe “now I have a lot of work I didn’t wanna do” then remembers he works for LTT

[@0Raik]

I want to yell at him so badly "DREMEL!!! dummy, you heard of it!?"

[@hynekboruvka8346]

Taran said, that he is almost never in the comment section, so here I go: When speeding up scenes, it is really cool to let us now how much faster that goes. Please do that next time :)

[@ChrisPietschmann]

This video is the serious fabrication that we've all been waiting for! This is like the car shows on cable, but WAAAYYY BETTER!! I can't wait for your next amazing mod video. Also, perhaps you guys could partner with StrangeParts on some really amazing project(s)?!?

[@longshot789]

Wow, a whole machine shop!

[@afikzach]

you bought an entire workshop just for this! i'm always amazed how much money is spent in youtube. well at least you have a nice bridgeport now

[@nolife1497]

I LOVE THE ENDING

[@skcitz0483]

I own that exact Bridgeport mill and all I got to say is get an extra feed gear for the auto table and make sure to use a brass or lead hammer on the Collette bolt

[@OzyPy]

When I saw the thumbnail I thought Linus dropped the 8K Camera in water and destroyed it.

[@pheidolefan]

Tubnail?

[@HoloScope]

Tubnail?

[@OzyPy]

@@pheidolefan Yeah english isn't my native language, spelled it wrong, it's fixed now though :)

[@abhilashdutta8463]

Tubnail?

[@kneonspace410]

Me too

[@Gamex996]

some one need to watch some "Old Tony"

[@brianorourke4880]

This.

[@brianorourke4880]

@@Calibrumm This :)

[@AlexJoneses]

but then this video would be completely dad jokes, and we've seen linus' dad jokes before.

[@CarlosElPeruacho]

I was gonna say this, ToT needs to be consulted in all things machining.

[@Gellis12]

Gamex996 also some AvE

[@Merrunz]

From a machinist, make more DIY videos like this. They are very fun to watch!

[@fungusnasdude]

Thanks for this!

[@arastiacreations594]

10:54 Linus straight up learned in 30 seconds what I've learned in 4 weeks in my mechanical engineering course

[@Zenar5]

Training vs educating in a nutshell

[@AluminumHaste]

@@Zenar5 Training is learning how to do something, educating is learning why it works the way it does.

[@Zenar5]

@@AluminumHaste thanks and you can tell the difference in a moment if the person gone through one or the other. Especially in the skill fields and triads.

[@WyldWolfDragon]

Bruh

[@cmdr1911]

As mechanical engineer I had an internship supporting an electrical engineer making test equipment. The plus for the company, a BS level ME doesn't understand PHD level electrical so I could steal secrets. Basically had to self teach machining. It was ugly to start lol. Helped alot in future classes though. Learn a lot in class but experience helps you use it.

[@anumeon]

I love how Alex said in the original teardown that "yeah. in 2020" when Linus said that we'd get a watercooled Red eventually.. :D Poetic

[@michael_marcos]

So I'm in the middle of a TPB binge right now, and Alex your voice and tone, for whatever silly reason reminds me so very much of Ricky from Trailer Park Boys, doing one of his 1:1 explanations to the camera.

[@TinyMaths]

YES!, that's why I'm watching, because I need to find out which tools I need to build a water cooler for 'my' AK Red camera. Yeah, that's it, that's why I'm watching.

[@polgzz]

17:52 "I wish that life had Control+F" 🤣😂😂😂 soo true

[@matttheking1655]

So True Indeed!!!!

[@eon_mp4]

I think the same think every time I have to find a specific quote/info in a physical book.

[@gef56]

i would rather have a ctrl + z

[@Shadow-ig3hf]

Linus to editors...."That's some pretty cool waterfall effects you added to our 8K footage" Editors to Linus...."What waterfall effects?"

[@NOSLEEPATALL]

Bridgeport mill, one of 2 I have and work with every day. Never thought I would be seeing one on Linus Tech

[@farley333]

"I wish life had Ctrl+F" ...me too, Alex, me too. Ctrl+Z would be also useful. A lot.

[@tbosss1018]

Alex: ¨I wish life had ctrl+F¨ Me, who can´t even find my phone when it´s in my pocket: ¨Me too¨

[@pzyckox]

"Better try calling it with the phone I have in my pocket... wait"

[@Taz_Olson]

I've spent over an hour looking for something before, that was in my hand

[@ixionn563]

@@Taz_Olson I did the same, my family burst out laughing when I realized I had been walking around the house screaming about my lost phone whilst it was in my hand. The human race does some of the funniest things despite being some of the smartest creatures.

[@zirconia3]

Nah, I so need Ctrl-Z

[@Arbiter099]

Go to wallet, CTRL+A, CTRL+C ,spam CTRL+V, revenue agents HATE this one neat trick!