We Have No Idea If Anything Else Is Wrong, But We Know The Clutch is Wrong So We Have To Start There

Рет қаралды 11,233

Ай бұрын

Scion clutch replacement
Cyclops Light - amzn.to/48BiJbG
Easy to use handheld - amzn.to/46nMFrz
Budget friendly, professional style scanner - amzn.to/44iDdUM
Basic Code Reader - amzn.to/3GZFDhT
Blue tooth scan tool - amzn.to/3org3vL
Perfect panel trim tool - amzn.to/40hPshS
Push pin removal pliers - amzn.to/3US2FN7
Excellent beginner plus tool kit - amzn.to/3UY6e4z
Excellent Basic Starter Tool Kit - amzn.to/41JVRn2
Must Have Gearwrench set - amzn.to/3AfZNAc
Power Probe Circuit Tester - amzn.to/3mOrQ6N
Basic Test Light - amzn.to/40mKdNN
Part 2 of the Scion clutch replacement link. Keep Wrenching!
studio.kzbin.infoE3sR...
Facebook links - both Facebook are closed groups, meaning you have to answer all the questions to join. Both groups are full of follow mechanics, some retired, some working in the trade & some excellent backyard/shade tree mechanics.
Show us what you're working on!
Wrenching with Kenny = / 575412787264269
Backyard Mechanics = / 442507346633755
‎@WrenchingWithKenny ‎@SNAFU.performance ‎@traditionovertrend2704 ‎@ktmracingsisters1261 ‎@matersworkshop6123 ‎@MotorMouthRadio @cruzcorp914
#wrenchingwithkenny #keepwrenching #wesselmotorworks
#mechanic #automechanic #autorepair #automotiverepair
#clutch #clutches #clutchgod #toyota #scion #transmission

Пікірлер: 54

@Uticagreens Ай бұрын

One of the only times you didn't tell us . . . "You don't have to go bananas tightening this stuff." "Anyways" . . . you do good work Ken.

@ottopartz1 Ай бұрын

I really like the fact that you are always verifying issues before you proceed with repairs. It really helps me with understanding some of the processes involved that I can use when working on other vehicles.

@rickdecastro4584 Ай бұрын

Kenny, I heard your comment in passing about needing a knee replacement. Let me offer some advice: Get with a physical therapist before hand and start strengthening your legs and knee - "pre-hab", instead of rehab. I wish I had.

@billmalec Ай бұрын

Yup

@oceanmariner Ай бұрын

A replacement knee only lasts so long. Get all the info first.

@stevewhite3424 Ай бұрын

@@oceanmariner My two are 11 and 10 years old respectively and doing great. My advice is if you've been told you need one then do it. Delay will not make it any easier.

@oceanmariner Ай бұрын

@@stevewhite3424What prompted my comment was a friend has 14 year old replacements and was told they can't be replaced.

@thomasdaum1927 Ай бұрын

It’s absolutely amazing how good the results are when you use the ( right ) parts !…….

@thomasdaum1927 Ай бұрын

Never apologize for burping , it usually means good beer or food !……. Or both !…… Thanks for all your hard work for us !…..

@TIREDOFEVIL Ай бұрын

Fun fact, my boy had the hydraulic throw out bearing on his 2004 Saturn go bad. So he ordered a complete clutch kit as the vehicle had over 100,000 miles on it. He had a friend help him remove the tranny, which means they had to drop the subframe to accomplish this repair. He went to start it up upon conclusion of the replacement, guess what, no go. He came in from the shop frustrated, that's when I asked him why he did not ask me to get involved, he said he was confident in his skills. To make a long story short, Saturn used two types of clutches, normal and a self-adjusting type, he had the wrong style, went and obtained the correct one once he removed the replacement so I could see what the problem was. Reinstalled the correct one, put everything back together and low and behold, it works fine. So, it pays to look at things when you really don't have a clue.

@ForCrynOutLoud Ай бұрын

It pays to look at things any time, whether you have a clue or not. i'm not really seeing the fun fact but whatever.

@Michael-yi4mc Ай бұрын

Happy Sunday from Hawaii. It’s 0430 here.

@StevenDaugherty-uo5cs Ай бұрын

Aloha Hawai'i was my home for 20 years, watching from Thailand now.

@Michael-yi4mc Ай бұрын

@@StevenDaugherty-uo5cs 👍It’s a small world after all.

@robertpickwick6725 Ай бұрын

I owned 72 Dodge Challenger 340 std. Tran. After about 15-20,000 I was getting chatter. When we opened it and went to remove the Pressure plate a bolt was missing. But half of the stud was in the pressure plate. Technically a factory defect.

@thomasstone313 Ай бұрын

Thank you about the line wrench. You are the first one I have seen to address that. I learned that from my dad back in the’60s

@GeekBoyMN Ай бұрын

Learned about line wrenches in high school auto mechanics around 1980 and in the Navy we didn't touch any kind of line without line wrenches. Since then I haven't needed them often enough to justify spending the money but if I had my own garage I would get a set.

@donames6941 Ай бұрын

Glad you made 2 parts and not cut it down also back in the day when i was young and in debt i had to use what i had for tools because living paycheck to pay check i could barely afford the parts but a shop should have all the tools needed

@stephenmeeks684 Ай бұрын

As I understand it, shops may supply special tools for specialty work, but most shops rely and depend on mechanics to bring their own tools to work. I did, however work in factory situations where all tools were supplied by the company, including storage and replacements. Mechanics were held responsible for the tools assigned to them.

@davidlampe4153 Ай бұрын

TC, XA, XB are built on the Corolla chassis from 2008 to 2017. 2.4 liter engine. Early models were built on echo chassis 1.5 liter engine. Nice car’s if you take care of them gave away my 2004 XB it’s still running I bought it new and put 230,000 miles on it. You didn’t say what year your TC was.

@joemuncie9187 Ай бұрын

Wow, never even heard of someone screwing up like that!!! At least you caught the wrong parts for the other car before installing them.

@glennfields8121 Ай бұрын

Great job brother Kenny! Kenny, you are such a smart man when it comes to auto repair. When you began the transmission installation , most of us would have called or asked for someone to help us but you did it and all alone. I think the idea of using the scissors jack was ingenious as it moved the engine just enough to hep to get the tranny in place. I thought that I was the only one who would have done such a thing. When you said 'especially when you're getting up in age, like I am', my thought was that there is no replacement for experience. You have done so many jobs like this that it is second nature to you. We "poor schmucks" lack experience an that is why I can't thank you enough for making these videos. Hey Kenny, is it me or does that Scion TC have a lot of tranny mounts? I actually lost track of how many you put in. I guess I may have to watch the video again. Are some of those considered to be engine mounts?

@philly12887 Ай бұрын

Flywheel surface didn't look properly resurfaced from previous shop. Neat throw out bearing design. I'm curious how you bleed it of air.

@SeanBZA Ай бұрын

Yes, looks like that shop "refaced" it with an angle grinder and a flap disk, from all those marks. Did not want to spend the actual time, and new crank bolts, to take it out and actually reface it properly.

@jlmullikin Ай бұрын

Thanks!

@WrenchingWithKenny Ай бұрын

Thank You so much !! Keep Wrenching!!

@stringpicker5468 28 күн бұрын

Pull half the car to pieces for what should be a simple removal. It's the modern way I know. I remember when a couple of my mates and I put the trans back in my old Toyota Corona wagon. Took us 23 minutes and we were none of use mechanics. Just worked in a friends car pit.

@WrenchingWithKenny 28 күн бұрын

Great story! Aaahhhh the gold old days when stuff was simple. Thanks for sharing & watching the channel. Keep wrenching 🔧

@aprilgeneric8027 Ай бұрын

GT tool in osseo, minnesota will rebuild your Dewalt if you want. it costs almost as much as a new one but i get them to put a new casing on it when i have them rebuild/repair it and that;s 50% of the cost. i'm assuming you have that 18v 820B model that can't be replaced at the big box stores any more.

@WrenchingWithKenny Ай бұрын

Good to know. Thanks for sharing & keep wrenching 🔧

@leonardhirtle3645 Ай бұрын

There are people who “say” they are mechanics and then there are actual mechanics.

@jthonn Ай бұрын

Coming along nicely, good work.

@bobby9195 Ай бұрын

Hello Mr Kenny, hope you and Meg are doing well today. Tuned up that PT Bruiser 07, the usual, but smelled fuel in oil. Not bad, runs ok but at 3500 rpm it bogs, scan throws 02 sensor code. It's lying, cleaned throttle body, but looked at injectors and pretty sure at 150 thou, they're original 😮. Going to change all 4 and hope it cures the fuel problem.Crazy bruiser😂

@mckinleygoetz9855 Ай бұрын

Wobble extensions and Wobble sockets can save a lot of heart ache.

@Toolaholic7 Ай бұрын

This why you compare the old part to the new part before installing them

@dougdrake7663 Ай бұрын

If mileage was over 100K would you change the mounts while you are at it?

@brad6665 Ай бұрын

Wish I had a lift to put my Honda civic on when replacing the clutch and 5 speed, car was on jackstands and working on the ground lifting the tranny with one arm because of the lack of room to get both arms in. Had to do it twice because the un named parts store gave me the wrong clutch and it broke 3 months later. Again on my back laying underneath. Yea, those were the days

@declanoshea8417 Ай бұрын

Hello got a 2012 kia creed hatchback 1.6

@timferguson8654 Ай бұрын

I always replace the flywheel too if it has a hydraulic clutch

@user-dr2jh7do5j Ай бұрын

Hey Kenny, what is your general experience with Nissan CVT transmissions?

@braddofner Ай бұрын

I would be curious to know your feelings as well. Just because I have a Sentra with one....

@rustystubbs242 Ай бұрын

Anything CVT equals JUNK. You have been warned.

@thomasdaum1927 Ай бұрын

If he is lucky none of, they are trouble !……

@garyclark1135 Ай бұрын

I know people have asked for longer videos, but I fast forward several times.

@dave6199 Ай бұрын

Crank the playback speed up a bit

@StevenDaugherty-uo5cs Ай бұрын

Shaking my head and wondering how anyone could put that other clutch plate in there and not notice it wasn't engaging the splines on the shaft. Some people just shouldn't be allowed to touch tools.

@WrenchingWithKenny Ай бұрын

Agreed! Thanks for watching & keep wrenching 🔧

@aprilgeneric8027 Ай бұрын

knee replacements are not advisable until it breaks. reason being is when i had my knee job it's not 100% guarantee it will be completely successful, and the replacement only will last for a person whose most difficult activity is a round of golf

@thomasdaum1927 Ай бұрын

The reason for using a vice grip is you don’t have the right tool ! 😟

@MajorWeakness Ай бұрын

Where is the "bananas "?

@TStheDeplorable Ай бұрын

I hope the previous shop refunds her 100%. If not, I'd love to see them exposed.

@samfeldman1508 Ай бұрын

Do you worry about wearing your ring and possibly injuring your hand? I try to take all jewelry off before working on any vehicle. All that said. . . nice ring. Those clutch bolts look small. Probably don’t want to torque too much? Like don’t go bananas?😜🤪 Years ago I did a clutch on my MGB. Don’t ask! Horrible trying to mate trans and engine. And I had way more room than you do with that FWD car.