Weathering & New Wheels for the RC4wd C2X Scale Crawler

I couldnt stand it anymore and had to do something with the C2X and its shiny gray paint, lol. Not to mention the killer rc4wd black rhino wheels and TSL thornbrd tires.
www.ultimatescaletruckexpo.com
Check out my Amazon influencer store page for some of these products;
amzn.to/2NMKTtX
If interested in supporting the channel, here is my patreon:
www.patreon.co...

[@BigfootRCrcoverlanddave2646]

🇬🇧🏴󠁧󠁢󠁥󠁮󠁧󠁿🇬🇧🏴󠁧󠁢󠁥󠁮󠁧󠁿🇬🇧👍🏻👍🏻👍🏻fantastic channel my friend so inspirational when I’m doing my RC Crawler,like to watch and listen to your builds for ideas, at the moment I’m doing an interior for my Kanyon,it’s a classic 1/10 scale looks a bit like a Defender Land Rover,I am making it look like a Mitsubishi Pajero mk1 overlander, any way thanks again and take care and stay safe and well 🇬🇧🏴󠁧󠁢󠁥󠁮󠁧󠁿🇬🇧🏴󠁧󠁢󠁥󠁮󠁧󠁿👍🏻👍🏻👍🏻Dave in Cornwall Uk 🌊🌊💨💨💨🏄🏻‍♂️🏄🏻‍♂️🏄🏻‍♂️🏄🏻‍♂️ nice wheels 👌

[@michaelhoyle3266]

I've always loved the look of the thornbirds. Now your C2X matches the rest of you rigs. Maybe weather the gladiator somehow next?

[@gregkeezee5969]

Hey buddy I went to your Amazon store but I couldn't find these products what are you using to do this with???

[@stephenhensley3077]

I cut 40 grams of rubber off my Thornburgs 1.9 love the side knobs

[@gregkeezee5969]

Never mind I should have watched the hole video... 😂

[@ricklewis950]

Thank u for running thorn birds everyone talks so much crap about them but i love them

[@MaxeeOffroadRC]

Great video my friend 👍 nice

[@kierondraper1799]

Love the videos and all is great. I watch a few other channels on RC but yours is what RC trucks is all about.....making it your own. Keep it going 😊

[@razycabrones]

In love with you channel since I first came across with it you one of the biggest influences on my addiction now a days I’m just stock pilling the basement with scale rigs rust is king

[@markwhite8543]

This era Yota needs more cancer and dents for scale accuracy. Great job!

[@sammygonzalez7627]

What is the black that you apply before the brown ?

[@RCeveryday]

It was a velejo black wash. Gets down in the cracks and dries

[@sammygonzalez7627]

Can you put one of the LWB body's on this truck

[@RCeveryday]

The lwb is a little too short for this chassis

[@masonsfloridaadventures0581]

Me and my dad are going to be doing this with our trail finder 2 body after we get it together.

[@joe-mac]

Great job man. Keep it up. Love the videos 😃

[@dylanconn6079]

I run those thornbirds on my capra in north Florida. They do awesome, people make fun of them but I'm either 1st or 2nd place with these tires

[@bjj21]

You need to do my mad max build... I've got a build taking me over 2 years. Something no ones done yet. But I'm still trying to get my Fury Road monster truck built.. hit me up

[@boldrbangr9834]

Totally agree on the Black Rhino wheels. Saw a 1:1 Gobi Gladiator with color matched Black Rhino wheels & it looked killer, so I put a set on my Axial Gladiator. The bead lock part is fine & the center caps with 8 tiny screws each are a PIA. Guess its the price of being cool.

[@tonyfrench3862]

this is art! i love it, i do realy like the tires very aggressive rig looks sick

[@GhostRider-ii7tz]

Looks awesome.nice work 👍

[@Parrell84]

Hi, amazing job and fantastic video, please can you give me an advice? I painted a defender body, already used rust pigments, with vallejo rust washer and black washer, now I can spray the body with the tamiya flat ts80? or it will damage or erase my job? thank you in advance ☺

[@RCeveryday]

Most people say its OK to spray a matte clear over it, just make sure its really completely dried. I usually dont seal mine because it can change the way some effects look, makes light rust darker etc. Id say try a little spot on yours and see if you like it first.

[@Parrell84]

@@RCeveryday thanks a lot for your prompt reply 😊, I like how it look now, so I'm scared to ruin my job, but if I don't seal it, won't it be removed using the crawler? with water etc?

[@RCeveryday]

I haven’t had much issue with mine coming off. It depends on the product used. My rat king got rained on down in Florida and the body was just fine. Wiped it off with no damage at all.

[@Parrell84]

@@RCeveryday ok maybe I can leave it as it is, however I used a Vallejo pigments burnt sienna, vallejo rust wash and vallejo black wash...thanks again ✌🏼

[@rcpatinaguyllc2655]

Nice and subtle. 👊

[@JoseHernandez-yv3nt]

Hi, what chassis is that?

[@RCeveryday]

Its the RC4wd C2x

[@RCVHX22]

Very nice done, cool vide my friend, i like it 👊😉👍

[@amilcarmoncada1801]

Felicitaciones de nuevo un muy buen contenido de este video, me gustan las ruedas nuevas y el efecto conseguido con la pintura saludos mi amigo desde Venezuela.

[@GazVanDyk]

Very nice 👍

[@arni7810]

So cool!!! I'm trying to get the 1/10 RGt challenger truck RC..in the green and I want to make it matte on shell and weather it..any info on how to remove the gloss on shell😢

[@RCeveryday]

If it’s a hardbody you can scuff it with some scotch brite to remove the shine. Im not familiar with that truck.

[@arni7810]

@@RCeveryday hey, nope unfortunately it's a soft shell type.

[@arni7810]

@@RCeveryday soft shell type which comes with most RC...

[@RCeveryday]

gotcha, they are painted on the inside, so the only thing I can think to give it a matte finish is to spray a matte clear on the outside, youd need to mask off the windows and any details so they dont get covered

[@arni7810]

@@RCeveryday hey, should I use tamiya Ps- 55 clear on my rgt challenger shell to remove the gloss?

[@pnwRC.]

AWESEOME video! I've tried this many times, but I never get it to look right.

[@RCeveryday]

I’m still trying too, i try to go in with no expectations and it’ll turn out how it turns out. Lol.

[@rccalifa]

Perfect job# Likeee

[@PhoenixRCCrawler]

👍🐒🇺🇸🇺🇸🇺🇸

[@kyleprocon9809]

Body came out great

[@rccrawlerfamily]

NICE JOB BRO I LIKE 👍🤘🤙😁

[@geneside0]

Awesome work mate, looks really nice without the shine, does your bulldog in the background have a name? Lol..

[@RCeveryday]

I call him sparky 😆

[@geneside0]

@@RCeveryday well sparky looks like he loves it too, awesome channel btw, soo many tips and tricks, I’m looking into try weathering my WPL C24 and WPL B-16, if they come out ok i will do it on my 1/10 scale.

[@RCCambodiaOfficial]

Good rc