How to Wind a Warp

[@marthabeimer8444]

What an absolutely pleasant experience that was. I have warped for years but never realized how gentle that action can be. You made my spirit rest with your unhurried and totally informative demonstration. Thank you for being so gentle and easy to follow and see. I will look for more of your videos and anticipate them eagerly. How soothing!!!!! wow.... balm to a bruised spirit.... God is good.

[@maryannkennedy1579]

Will try again shortly

[@ALICE-LEAPER]

EXCELLENT video. Thank you for speaking slowly and clearly. Also thanks for not having the music in the background so loud I can't understand you... I hope I find many more of your videos... Thank you again... I wish you were my neighbor...

[@jchollingsworth1389]

Thank you, you've made warping a warping board understandable and without fear.

[@somasekharr9797]

I am from traditional silk saree,weavers family in Begaluru, India. Still we have pit looms & we get warp from warping wheel.All weaving process r hand made. Ur method is quite gud. clearly explained. Would b helpful for beginers & students of technology. Your explanation & demonstration is suprub. Thank u madam,,🙏💐👌

[@hollynoscar3534]

the cross part always confused me, until this video... thank you so much. most other videos just whiz by this part.

[@somata59]

It is so nice to know that you are the founder of webs, the yarn place I love ❤️

[@kaarigiella7938]

Finally! A video slowly showing how to warp a figure-8! Other videos blow quickly past this vital step. Thank you!

[@minkademko2335]

I think I like your process because it seems to guard against common problems. I can't wait to try it. I'll watch again to be sure what I'm doing. Thanks for this video!

[@deborahgiuffre5494]

This is the clearest, easiest to follow instructions.

[@KimShank-t8g]

Thank you; that was a big help!

[@sheilamasich3185]

This was so helpful! thank you.

[@stephaniebenson2501]

One of the best and most useful, informative instructions I’ve found. Thank you.

[@fourbirds22]

Mrs. Elkins, thank you for this video. It is the only video that makes sense to me on the subject.

[@gailjahn8303]

Just so amazing. I was just watching one of Barbara ELkins' other videos - she is one of the best instructional I have seen. Thank you.

[@maryinthemaking7211]

Wonderful, thank you!

[@crisenigma]

Thank you so much for your videos. It is a real pleasure to learn from you, your voice is all sweet. Thanks from Switzerland :)

[@vickiroach4689]

Thank you for having this video up, I am very new with weaving and this helps me a lot on how to use my warp board.

[@fionadouglas1]

Thank you, Barbara! You are a wonderful teacher! This video is so clear and easy to follow. (PS love your blue scarf...very pretty!)

[@tinacruzart]

Thank you for this video guide! I refer to it every time I go to the warping board. Happy Weaving! :)

[@marinamartinez6886]

Thank you for the very clear instructions. As a newbie I appreciate the tip about putting the knots towards the end of the warp, hadn't thought about that.

[@lizchattin7016]

A new weaver here. Clever idea to 'hide' the knot at he back of the loom.

[@marvinrust6478]

I have watched this video many times and always learn from watching. you are a wonderful teacher. thank you for making this video. Marv & Kathy

[@uwodahikamama2]

this is the clearest instruction video I've found! thank you!

[@basilrose]

The most beginner-friendly warping video ever -- thank you Barbara! Will there be a Part 2 on how to get this warp on a loom and ready to weave? Please I hope?

[@patriciaclough3984]

I also would like to see how to get this warp onto a rigid heddle loom. Great video

[@crisenigma]

kzbin.info/www/bejne/n5TakHhmp62MeNk

[@laurensunday3119]

Wonderfully done! Incredibly thorough and clear. Thank you!

[@jeanpierrecyr4282]

Precious advices all the way long and easy to understand, thank you so much that will help to do it without mess

[@Lee7699]

Thank you! This video was very informative! Too bad I didn't see it before I purchased my warping board. I have one of those "knuckle-knocker" warping boards with the pegs too close together!🙄

[@fisherjohns]

Wonderful clarity. Thank you so much from this new weaver!

[@onegreenev]

Did my first warp on my board today before looking at your video. Mine is 10 per inch and I have 13. I was going for 14 but did not have enough. This is a test of my skills for warping and weaving. I have a small table loom and it's not very wide and only two frames for simple weaving. I started my warp on the opposing end of cross. My cross was done around just two pegs and you have your end around three. I think mine will work but I just don't have a large opening but plenty for setting up. Anyway, thank you for the video and instruction. Now to take it off my warp board.

[@catherineraney8235]

excellent! Great tips and very clear explanation. Thank you!

[@moslop]

Thank you, that was a very instructive and useful video 😊

[@judithleatherberry931]

Wonderful explanation! Helped me a lot! Thanks!!!

[@mohammedegyptian2527]

thank you very much this tutorial is very informative thank you again

[@ellenblack5376]

Thank you for a wonderful video !

[@ritamclaughlin9681]

Thank you Barbara! You give a wonderful, clear presentation of how to wind a warp!! I have also been watching your Dressing the loom video. are there anymore teaching videos in this series? Rita

[@EC-gy9pv]

Thank you, Barbara! Excellent video and great teacher!

[@diensthunds]

We aren't making a bed in the Army. Comical! I loved it.

[@arvizuana5984]

Muchísimas gracias por su explicación, es perfecta!!!!!

[@sharonbowns9196]

Excellent directions. But, what if I’m warping 3 1/2 yards? I understand whole yards but do I have to round everything to the whole yard?

[@tamiraelhiba2576]

fabulious .thank you madame

[@richardschaffling9882]

Great video thanks

[@candacekimball9366]

Thanks Diane it is informative.have a wonderful education tomorrow ….Spinning, fiber, 2 or 3 days ?👍

[@syncope88]

This was so so helpful, thank you!!

[@sharilinfischberg1339]

Really helpful

[@lindaworachek5905]

Thank you so much!

[@rosemaryschaub7219]

Can a warping board be glided together instead of scred?

[@karenbutton5271]

Are you doing a 12 dent reed? Is that why you're doing 12 count?

[@myrany8407]

I hang my warping board from over the door wreath hangers stuck on a door. LOL

[@grayautumnday]

The command hooks in the video are cracked - looks like the expensive jumbo ones they’re using are still not big enough. The Jumbo Command clothing hang knobs (no hook) might work instead.

[@loriezerbe1708]

I did not see how you tied off the warp thread when you are done and ready to tie up the warp. Do you tie the end to the sister thread in the 'junk area of the warp?

[@barbaraelkins1516]

I end as I began with a loop and an overhand knot. then I catch the loop on the end peg of the warp.

[@websyarn]

You end the warp as you began, with a loop and an overhand knot. Put the loop on the last peg of the warp and it will be secure. Remember to keep the tension the same as you've had on the whole warp. We hope that helps! Let us know if you need any further help with this!

[@colettelandeen2182]

This video was great, but I discovered too late that this technique is for front to back warping on the loom. Can I use my warp to warp back to front? Can I move the cross?

[@mikemckenna861]

Heddles

[@websyarn]

Hi Colette, check out this video to see if it answers your question: kzbin.info/www/bejne/n5TakHhmp62MeNk If not, please let us know and we'll get back to you with an answer! :)

[@dorottyareti6056]

Lázár Imre szemiotika 101 anyone?

[@websyarn]

@basilrose If you like this video, you'll love our How to Warp a Loom from back to front video. It's the next video you're looking for. ➤ kzbin.info/www/bejne/n5TakHhmp62MeNk

[@DianeDriver1]

This helped me so much! Thanks.