How To Make A Table Saw Fence For Homemade Table Saw

This time I will shop you, how to make a simple and accurate table saw fence for homemade table saw.
T track rail: shorturl.at/rvBFT
How I made a homemade table saw: • How To Make A Homemade...
How I made a crosscut sled for table saw: • How To Make A Crosscut...
You could support me and my content creation by buying Well Done Tips official outfit: teespring.com/...
Due to factors beyond the control of WellDoneTips, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. WellDoneTips assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. WellDoneTips recommends safe practices when working with the tools or equipment seen or implied in this video. Due to factors beyond the control of WellDoneTips, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not WellDoneTips.

[@jimnz17]

i must have watched 20 table saw fence vids. your is the simplest

[@leorincon3163]

Detr D .trabajo de carpintería sobre la fi, gii

[@abhimanyusingh3234]

One of the best hand made fence and easiest too till now I have been observing on U tube, thanks and best regards!!

[@PurpleRhymesWithOrange]

Excellent! I've been looking for a fence I can build but thought I couldn't get one both accurate and inexpensive!

[@lecobra418]

I like how the table saw you made is basically upgrading itself in the process! I think you should've made two rails, instead of one, one for both side the ensure the fence will not be moving, especially at the other end where lever arm is greater. Otherwise excellent build! Thank you, I will be building myself the table saw this weekend and the fence too!

[@fariseudoagreste]

fantastic, i've been searching for homemade tablesaws the last few days and your solution is the best I found. simple and efficient. congratulations.

[@vedatbajramaga175]

Vrlo jednostavno ali odlicno prikazano Zasluzuje svaku pohvalu.

[@Maghanashi]

Good idea, but there's the introduction of flex to the far end of the fence. It would need to have rails and fasteners at each end, both requiring individual adjustment.

[@antoniobavia6167]

one of the best and simple solution to realize a diy fence on the web, very good and useful job.

[@mehranfreeman6192]

I made similar thing years ago when I was young, but yours is much better than I made.very well done

[@jordanhenderson3741]

Without a clamping mech on the other side, would your fence not flex if you were to rip a long board?

[@hassanelnaggar1985]

*انت رائع يا عزيزي تحياتي من مصر*

[@kevinjackson4237]

Great job! So clear and concise. Thank you for sharing this

[@calogerosantangelo3723]

The most practical and simple saw fence

[@krishnamurthykeramalu2487]

💐Very nice work sir 💐👍🇮🇳

[@mcopado]

Thank you for a really simple design, with clear instructions.

[@norlanenriquecastillomarti1781]

este señor lo considero mi maestro .y le doy muchas gracias

[@maryjocookson7156]

good idea , well demonstrated, hope to make this for my old tired table saw!

[@AS-pg4mz]

Love your clean and easy tutorials!

[@pilkyish]

Great video, great solution. Can’t believe you got so many thumbs down.

[@johnbravo7542]

very good,and also your voice is a lot better than the computer voice in your other video.

[@chavink1]

I like you adaptation of t track and slot screws

[@gersongaingob9056]

Thanks so moch fo the videos, it's very educative.

[@vipinpatel4545]

Very simple, but effective

[@princewarior2554]

Cool design.. Well done..👍🏽

[@souhailrider1300]

Very nice ✌👍

[@frankpayne2126]

really easy to understand thank you a very good job

[@ruttur1072]

3:52 from this point on forward you can see the fence wiggle on the top side. I would do what you first did on the other side as well to keep it more intact.

[@jimnz17]

maybe not. it jiggles when he moves the fence, not when its fastened. the only play will be in the elbow at the near end. i suggest bulking up the area where the slide joins the fence.

[@rayker6799]

simple pero epektibo....ang galing mo bro.

[@neliorodrigues2249]

Muito bacana ficou excelente seu projeto guia de Serra de bancada foi uma ótima apresentação e muito boa à demonstração valeu obrigadao

[@ВасяИгнатов-ж3к]

Сэр, может я ошибаюсь, но мне кажется, что вы мой соотечественник и я безумно рад за вашу смекалку, что вы ведёте канал на не родном для вас языке, оно и понятно почему! Надеюсь, что я не ошибаюсь, т.е. делаю выводы по знакомому мне акценту и произношению "р"!) Собственно хотел вам предложить приделать линейку сбоку и пусть это будет ещё одной идеей для нового отличного видео! =) Пока ещё не посмотрел всех видео, может быть идея уже была воплощена! Подписался! Искренне желаю успехов и развития!

[@fabricioandres]

Toma tu merecido Like! Gracias!! 😁

[@vicentealbertopereyrasoto9609]

Opino que en el otro extremo debe llevar con soporte que ajuste a la mesa, pues la vibración o algún otro factor puede abrir la regla y causar un error de corte. Pues hay firmeza al inicio y no a la salida

[@jrm-6892]

buena observacion amigo suerte en tu negocio es muy lindo la carpinteria

[@miriamgarcia8195]

De acuerdo

[@joseantoniogalindocarmona7163]

Completamente de acuerdo. Algo asi como una varilla roscada que jale y ajuste el otro extremo. Saludos

[@aristidemoise1970]

A mi place mult , toate vizionate , mulțumesc mult o zi buna

[@Tukangkayu82]

Very useful tips

[@CreativeIdeasMaker]

Great as always, thanks for sharing

[@viplavanand5077]

Good job. Simple one

[@bdanc]

Very nice design 🎉

[@СергейГончаров-и7в]

Отлично! Просто и быстро! Удачи!

[@diegohperez6434]

Very very good easy and it’s plenty room to use hard wood thank you very much

[@hazimzaid3071]

simplicity and elegant design well done

[@jerichdatu9325]

SIMPLE, NICE, EASY, AND ACCURATE....MOST IMPORTANTLY COST IS CHEAP

[@tonyrattan8093]

Works great. I did add a rail at the top end of the table though.

[@md8744]

So middle bolt head will clamp in against with front wall rail? Thanks Sir

[@rexmontana3058]

Simple and smart...very nice

[@sajadwoodwork]

Nice work sir please keep it up

[@bernym4047]

An excellently produced video. Thanks.

[@ArcanePath360]

I was looking at buying a T track but getting one in the UK is difficult, they're so expensive, but your idea of just cutting your own from a square tube is brilliant.

[@barrydyson8573]

Hi very good video I have a table saw but the fence is not that good so I will make yours well ill give it a go well done its nice to share and help each other

[@ArchLinuxTux]

What were the pupose of the t bolts if the middle carriage bolt was the porviding the locking action? Great job.

[@rupertschott5437]

Excellent video! Well done!

[@juanosvaldorao4099]

Muy bueno. Quiero hacer una mesa de corte con la circular pero, quiero adaptarle los accesorios de seguridad, Cómo los hago? Gracias por una respuesta. Un saludo

[@bilgaissa5831]

The best i have seen thanks

[@Mrpepealvarez]

Buenisimo video una gradisima lecion me a encantado gracias por estos videos tan buenos. Un saludo desde Asturias, España

[@timothyzornes3327]

How do you cut the alluminum without the fence we are currently making to make the cut straight??

[@junemecate2087]

Nice idias

[@ibnumundir6650]

Verry good...

[@neliorodrigues2249]

Ficou um espetáculo muito bom mesmo brigadão VALEU

[@عبدالرحمنالزميلي-ت2ظ]

Thank you so much for your so nice show !

[@bakhthongchannel7974]

👍👍👍👍❤❤❤❤good idea

[@husseinhashim1973]

Great job bro.. Peace

[@sudhirpatil3434]

Nice! Appealing!!

[@opekmebel7820]

creative 👍👍❤️❤️

[@sabahkattan985]

It is the best method, good on you

[@animalier2949]

Excellent Demo!

[@henrycollings6818]

very interesting and a cheap way to make saw fance

[@miltonmainardi2605]

Hello Friend. good video and beautiful circular saw table. what is the name of the part you used to make the cutting guide. the one that is fixed to the side of the table.

[@jiyouthtalagang5023]

بہترین ورک

[@rubo1964]

track on opposite side will make it very stable since its placed longer side of the table and fence is pretty long and rather lightly constructed.

[@ArcticFlies56]

Great job and simple to build. Very nice.

[@Rocstoneau]

A clean and neat visual tutorial without all the preamble waffle I'm used to hearing on most other sites. Did i miss the handle being put on?

[@amichief1437]

No , That's the only thing left out, I never saw it either !

[@charliephuket]

Wow.It's​ very​ good.

[@ravingrabbids72]

guys cut a bigger hole out for saw then your safety guard will pop up on your table if using a plundge saw 😃💪👍

[@waitersluvhjy66]

Im using wood prix instructions to make it and I do it already :)

[@JUST-UK-JAY]

you aint done shit, shuddup !

[@islasnormalue85]

Plans are just brilliant. Thanks Luvenia !

[@md8744]

Hi Sir. What is middle knob assembly. Pressed thread nut in knob and turn into long bolt ( the head of bolt face inside the rail and end of thread of bolt stick out to turn knob in?? Was it right?? You didn't show how on those steps or too fast I didn't follow up! Thank you please give advice

[@carloshumbertomenarodrigue1031]

Excelente, los videos con respecto a la armada de los diferentes accesorios que uno necesita para la realización de trabajos de manualidades o labores de ebanisteria. El único problema que veo es que soy colombiano y no tengo conocimientos de inglés. Sería bueno que se tradujeran al español. Esa es mi inquietud , de resto muy buenos felicitaciones y muchas gracias

[@habibeghbali5050]

Hey these videos and pictures are great and useful thanks for everything

[@stephenkoko639]

What is the type of saw blade you used to rip the aluminium?......thank you

[@saleemkader2126]

Very nicely done . Step by step. Thank-you I will try to make one I know it won't be as good as yours.

[@panosdiy]

Amazing!!!!!!! Congratulations my friend!!!!!

[@georgehebdon2756]

Absolutely brilliant 😊😀😊👍👍👍👍👍, ace design in its simplicity, a few odd additions when I make mine, (in materials only), many thanks, liked,subscribed. I'm in the U.K.

[@erichart1180]

Very good 👍

[@mitrovdan]

Hi there, does your saw fence stay straight even at the end? It's a very long fence and i've seen guy's make shorter ones and complain that they moved left to right at the end ...you have the same problem?

[@enzofaidate2398]

Nice video!

[@rodrigoazevedo9682]

Thank you so much! You give me an insight to improve my table saw fence!

[@jamesonlondon7081]

You prolly dont care at all but does someone know a trick to get back into an Instagram account..? I somehow forgot the account password. I would love any tricks you can offer me.

[@gusjaxtyn5928]

@Jameson London Instablaster ;)

[@jamesonlondon7081]

@Gus Jaxtyn Thanks so much for your reply. I got to the site through google and I'm trying it out atm. I see it takes quite some time so I will get back to you later when my account password hopefully is recovered.

[@jamesonlondon7081]

@Gus Jaxtyn It did the trick and I finally got access to my account again. I am so happy! Thank you so much, you saved my account !

[@gusjaxtyn5928]

@Jameson London no problem :)

[@roltol7539]

am, but is it ok to have wobling other fence end ?

[@cannskulls]

Just the thing I was looking for. Thanks for the tip!

[@norlanenriquecastillomarti1781]

tengo una cepilladora de 6 pulgadas con una mesa de madera lo malo que es fija no puedo graduar la altura del rodo.y me gustaría saber como hacerlo

[@mohamadghannoum2185]

Great idea

[@jefferickson9044]

Very nice design. Do you by chance have any drawings for this?

[@peterhkoller]

Great, how did you secure the other end, (if not) there will definitely be movement and it will NOT be accurate.

[@peterhkoller]

Please respond?

[@sparkrace]

The whole unit is a tee square and when clamped to the table nothing is moving. Lidl had some flat sash cramps which use the locking principle of a sealant gun, I will add a cross section to it and will make a perfectly good fence.

[@OAbbas]

Thanks for sharing

[@peterh2800]

excellent job

[@orlandopow9102]

Very good

[@ksrahmat7789]

Really nice work there

[@gaweown]

Tks the tutorial,usefull.

[@eurochei3901]

👍👍👍👍 From Indonesian

[@mariusdanut4611]

Big like for you

[@ΘεοδωροςΖωης-β7σ]

please tell us about all the wooden peace dimentions ....

[@brunolovadina5723]

Complimenti

[@هشامالعبدي-و4ج]

bonjour simple et efficace, bravo