Backhoe swing cylinder rebuild.

Repacking the swing cylinders on the John deere 710d .

[@abnormallygifted1541]

Better than anything on primetime television, and I don't even have cable lol

[@Toyotas_n__Tools]

Maybe been a year now since ive turned on the tv l=p

[@dozer1642]

No TV in my house for 15 years. Best decision we ever made for our kids.

[@daleolson3506]

There is nothing good on tv anymore. Waste of electric,hollyweierd is on its way out.

[@garybulwinkle82]

Warren, I just rebuilt my swing cylinder on my 416 CAT, and looking at all those hoses and bolts I just decided to leave it on there! It wasn't that difficult! Also I don't have a HUGE vice to hold it while I take off the gland!! Most of the work you do on the piston and gland which comes right out!!! Sure wish I had a crane like yours though! One job I'm putting off is the seal on my torque converter is worn and she leaks when you shut her off. According to the manual, you rig up a sling to lower the tranny off of the roof of the cab. Sounds like fun!? Well at 63 I'm going to think on this a while!! Love your videos and your doggies!!

[@tonye4176]

You’re a hell of a talented mechanic man It’s a pleasure watching 👌🏻

[@HotAxleBox]

Thanks for uploading Warren, I really enjoy watching your videos. Your humour never fails to make me laugh. Take care man.

[@sal_e._mander5151]

Sitting here watching your video while recovering from a back procedure, use everything you can to save your back. Back surgeries are most definitely not fun. Keep up the good work and keep safe!

[@crcdistribution878]

Really enjoying your cylinder repair videos!! Happy to help you with spare parts next time. Thanks for sharing your knowledge!

[@bartphillips6391]

Excellent videos!! Nice to see a guy show the whole job. Very much enjoy all you do.

[@jackmartin4274]

Hey Warren, I am in Winnipeg Canada and I would like to thank you for your channel. I am an old HVAC mechanic so I have a slight knowledge of your trade. More importantly,I have been battling a serious infection the last two weeks and thank heavens I found your channel ,I have been unable to do anything of late, so you have provided a much needed way to pass the time. Thankfully,this nonsense I have contracted is leaving, however I am still going to follow your adventures. All the best Jack Martin

[@technicalitems731]

Omg. The pain of the Deere cylinders with the orange ring. I got cheap and starts buying cheap kits from Hercules. Thanks for the informative video.

[@stevegrulkowski7654]

So glad I watched this. @35:50 you gave great tip on compressing the rings but put old wear ring over so hose clamp isn’t pressing on the seal. Thanks Warren beauty tip!

[@dalemac7355]

I was a heavy equipment operator for 40 years worked with a lot of mechanic's and you are a good one don't listen to the nay sayers that's why they are watching your videos and not doing one of there own, keep them coming hand

[@mdouglaswray]

"Uncorked their head..." - rolling on the floor laughing my ass off.

[@cobrasvt347]

Hell yeah. My favorite channel 👍is it weird I get back home to the shop after a long day of servicing equipment and watch ya fix even more lol. I think I have a problem. But a good one.

[@anthonybinning]

cobrasvt347 same here

[@johnc.wunscheljr2873]

Your video is the best one on HYD that I found. great job ,.at least you know what your talking about

[@birdman4505]

You are a very hard working man sure do enjoy your videos

[@cobrasvt347]

That's a good idea for the Teflon seals. I usually use a piston ring compressor to resize them. The wear ring and hose clamp sounds alot easier. Thanks 😉

[@freddybowman9905]

Love watching your videos .

[@jasonbrooks3641]

Great video super helpful had to do a bucket cylinder on my John deer 310

[@davegc16]

I feel your pain, putting something down and losing it.

[@BarnyardEngineering]

A 360 degree camera would be handy. That way we could keep an eye on the dogs while you work, LOL.

[@2024s_truth-speaker]

Good job!💪🏽I always put me a big hose clamp around the pin and put it around 2oclock when I'm tryna drive it out so that aggravating assed pin dont keep falling/sliding out the other side.

[@dannymoses6043]

Good videos, love your dogs.

[@scruffy6151]

Thank you for the upload.

[@robertschumacher8713]

Warren A very interesting video Thank you

[@johnfry9010]

They are very proud of their parts for sure !

[@lw4609]

If I could afford it you and your family would go on vacation. YOU NEED IT. But you would go crazy. Lol. Love your work ethic work work work. You are a RICH man. LIFE IS GREAT 👍

[@stihl0903]

Excellent Job.

[@outlaw7x77]

Yes Warren, me likes the headmounted camera! Thankyou!

[@kevinnorwood2448]

I deffinately feel the pain on the bleeding. On blood thinners because of a heart attack. Keep pumping the vids out bud. I enjoy them as I am now on disability and unless there is groceries or grandkids I don't go out much

[@robert-vt1fq]

Give me Gary Job looks so good and like a professional I'm very proud of his brother looks very great

[@reubenhays9011]

Not bad,liked to have seen the install.

[@bytefix2603]

Another great video thanks Warren....maybe a chest mount for the gopro would be worth a try? You can get holster type setups but the camera sits in the middle of your chest and you can point it up or down, it would reduce the head bob (that's what it's called lol)

[@Imoldman]

Hey young man, you're very talanted and funny, Keep it up. Wishing you the best.

[@omarfranchesquini8620]

Gracias por compartir tus videos, bin explicados simples, de argentina

[@noseeum6385]

Never ceases to amaze me how deep and broad is your knowledge base and how methodical you are in your work. So tell me your secret on how you keep that camera clipped to the bill of your cap without it pulling the back of your cap up? I wear mine like that and it feels like I need a counter weight so it doesn't tip down over my eyes. You think some Red Locktite inside the headband might help? Appreciate all your video editing done in addition to your already full days.

[@kevinlwiltfong7941]

Warren, with all the smartasses (who aren't really smart) out in viewer land, you have to fight back. Good job. Good content. Good humor. Keep it coming.

[@blacksmoke5009]

Thanks for sharing bud 👍

[@johnknowing-zr8de]

HI western great vid, but I dont know what your hitting with the long steel bar? Im doing m y first re packing on a 310D stabilizer and have a rusted snap ring. Any more tips be great thanks..

[@ronaldclark1178]

The head mount is pretty good .Would be better if it was angled down just a little bit more. Thanks for the good videos.

[@JJ-jv1gu]

Cowboy Good stuff Impressive how u handle them hydraulics

[@adrianhughes5693]

have a question about your service truck ? if i understand it right the air compressor is hooked in to the PTO ? or is it the generator ? if able to could you give us a run down on how the system works please

[@noelhohberger1188]

That Earthquake does a good job I need to get one of them. Priced Right too

[@overthehedge0155]

Maybe trans gel and seals after the carbide bit lol. Good stuff love your videos.

[@mongomay1]

I used to use a piece of steel banding material, measure my OD + some for the ears. I would form it into a compression ring with the ends bent out at 90 degrees and hold them tight against the lubed o-rings and seals with needle nose locking pliers to help keep them from rolling over. Commercially a piston compressor tool with the right ID could do the same thing. It's like having an extra hand. I keep a 4' length of banding strap in my truck for those oh cr*p momments.

[@gutsngorrrr]

Great job, love the videos. Just wondered why you don't use a trash box for all the rubbish rather than chucking it on the ground, would be less work at the end of the day, not having to pick everything up.

[@embededfabrication4482]

a piece of hose on the fitting to collect the oil, brilliant

[@bouldersigns205]

A surgeon, good job

[@dougbledsoe259]

Wuz thinkin if you set that bucket down on some type of dolly, you cud roll/swing it side to side to allow access to those trouble makers....great vids...keep em comin 👍🏻

[@TheDieselbutterfly]

All hail the restorer of POWER

[@cobrasvt347]

Damn they included seal drivers. Holy shit !

[@sliderinc1]

If you turn that cylinder vertical it makes putting back together nice

[@jimwesselman]

Warren, Do you (can you) make your own hydraulic hoses?

[@daveprototype6079]

New subscriber Great video Cheers Dave

[@westerntruckandtractorrepa1353]

Thank you

[@ajmac5735]

Love the vids chap. Thanks. Q. Do you have to remove the whole cylinder or could you not just pull the piston and leave the sleeve in situ?

[@carsons6519]

I hardly ever pull the barrels just the rods and guides out fix them and shove them back in good to go

[@Braxton1118]

What brand is that huge rubber hammer?

[@warrentavernia5136]

I notice that is a bullet vise. I d weld it to the bumper. they are not cheap and you don`t nee some mud whistle stealing it

[@JJ-jv1gu]

Warren Tavernia mud whistle dope smoker with tattoos

[@tda1904]

Can anyone recommend an online store that sells service repair manuals for JCB telehandlers?

[@ohhpaul7364]

I thought most of those piston heads had a rubber O-ring on the inside to keep oil from going through the inside of them. Anyhow, thanks for the video and the play by play commentary; you make an hour go by fast.

[@reeferdogbassin7909]

I drank a bottle of K-Seal, now when i spring a leak the bleeding stops immedtatly! K-Seal works awsome for ur radiator leaks too!

[@locofigueroa1]

I enjoy doing this kind of work. I've done this for aleast a dozen times. and know what? Yesterday I installed one of the seals on backwards by mistake. It costed me about 2 extra hours had to take it all apart and do it all over again. it was fun though. 🤭

[@deandean8498]

Hey bud love watching your channel. Where did you get your hydronic knowledge it’s what I’m trying to work on now

[@petelyczek5728]

My work toolbox looks about the same as your service truck tool collection, except I only push 1200lbs of tools and they are a little smaller than yours. I did ditch some hammers though. I never needed all 13 of them anyway.

[@rickytart1028]

Much enjoyed...

[@carsons6519]

I like the air hose and blow them apart much easier on the back and shoulders

[@l.tp.ttomasiyo5061]

I enjoyed watching this video. Just wish you have the first clip on how you remove the swing cylinder. I have a 1985 John Deere backhoe and I’m trying to figure out how to remove the barrel from underneath

[@naybreed]

Yes I have 85 case D. An still serching

[@cndream1]

Warren, you are a hoot for sure !!!!!!!!! HA-HA

[@kecah04]

My little Brother does the same kind of work, but , he lives in Arkansas and I live in Iowa. Its kinda hard to watch him. your videos are addictive.

[@artmont9043]

Is that 3/8 gun? Also I see you got that earth quake how well does it handle?

[@richardjanssen3183]

They are awesome !

[@kennyfloyd4801]

Thank you Sir👍👍👍👍👍

[@cobrasvt347]

Lol sonic boom. Probably broke alot of windows over at the engineering department. HAHAHAA

[@TimWynnAlabamaRollTide]

Warren, great video. How many PSI does it take to take off that Nut at the 10:21 mark? I have a 310C and I was hoping I could do it with a cheater bar. I'm not a mechanics so I don't want to put no more money than possible into this project. Will the Earthquake XT 1/2" drive work with my small compressor from HF work? What size socket it that? Mine appears to be a 46mm (on the flats the nut measures 1.8"). Does that sound about right?

[@ghodgeco]

Is that an 8lb knockometer? Hit it Warren!

[@markcoulthard5502]

Emotion's, you save all yours for the dogs, the missus probably understands that.

[@chenderson4969]

1000th like, you’re welcome warren.

[@westerntruckandtractorrepa1353]

Thank you

[@y2kxj]

I’d love to accually rebuild a cylinder. I work in underground min8ng and we either do a rod pack kit or complete cylinder replacement..

[@hydraulicshop69]

Break into one you will just learn something lol they are not hard at all

[@y2kxj]

hydraulic shop I’d love to but zero time during work day to that. We have around 200-220 machines underground with only 50ish mechanics to keep them going... we desperately need more mechanics....

[@hydraulicshop69]

@@y2kxj take a leaking one home if ya can lol I was just saying it's fear of the unknown for most people good luck hope you get to sometime

[@JT-qf4it]

I like to clean and debur everything before I start installing the new parts.

[@IndianaDoug]

This ol' boy knows what he's doing! "Clown Hammer" I like it, mine is named "Thor" makes me sound a bit more civilized, whatever that is? new to the channel, just SUB'd

[@timsatori]

She must be I can hear her breathing hard in the background oh you meant the hydraulic cylinder that must be the wind LOL

[@drockwork]

Is there a removal video of the cylinder it’s self

[@tootoosick18]

Truck tour!

[@jiavin25]

Lot better with the head mount!

[@mandy8211]

Pape wanted $480.00 for a 510 starter. I put in a new kit for $70.00 and its still working.

[@Bodhranarama]

Sphere?

[@mandy8211]

So far, the 510 doesnt have any cylinders leaking. The alternator died and I just wired in one off a chevy. matches perfectly. the control valves need new o rings. thats coming up.

[@mechanictaft4848]

Bro you do not have to say your sorry you are a buisnessman solo you gotta take the calls .at least until trouble or daisy can answer your phone and book jobs🖒🖒🖒🖒🖒keep up the great work

[@billymcclanahan1794]

There’s a magnet mount for your camera, u can stick it to the truck n film away lol, or to tractors.

When you were pushing in the ram it reminded me of morning at my house lol

[@hottlimited]

👍🏻

[@muskegsmith3388]

just bought a seal kit for JD 4055 hydraulic pump. it said, made in Taiwan, province of China. They are being very diplomatic.

[@timmayer8723]

muskeg smith Damn shame. American companies are addicted to the smallest savings the Chinese manufacturers offer.

[@daveb8773]

You ought to check out Abom79 (Adam Booth). He is a machinist that worked for Motion Industries up until a few months ago when he decided to focus on his own job shop and KZbin. He did (and does) a good amount of hydraulic cylinder work. I think you'd find his stuff interesting. @Abom79

[@daveb8773]

www.amazon.com/TOOL-SET-SealTool-hydraulic-installation/dp/B01CYJQOSQ

[@daveb8773]

kzbin.info/www/bejne/pqDZf5qkpJKMj9k

[@felixcat9318]

@@daveb8773 Thank you for these two links.

[@lklekas]

Why not use your crane to pull rod out of the barrel?

[@fkaduberaki4127]

It is good

[@chuckychuck]

👍🏾👍🏾

[@richardlarsen5885]

Good

[@jeff-hk8yk]

easier to leave the cylinder in the machine and just use a come-along to pull the rod with the gland and the piston out - you forgot to remove the snap ring and install the temporary red ring to prevent buggering up the gland threads before pulling the gland out.

[@craigclemson9642]

Head cam ok but tip down more so we can see hard head that is what we need more of thanks still some of us around

[@johnnyholland8765]

No No No you did it all wrong. All your seals are backwards and you got left over parts in the sack you did it all wrong. What is wrong with you?........... Just had to say it. Excellent work as usual.

[@maxium4x4]

Torque to Spec = Tighten the ever livin shit out of it.........Hahahahaha my thoughts exactly

[@mandy8211]

Dont listen to those that knock you, they are just upset they never amounted to shit in their crappy lives.

[@cndream1]

WOW $500 for seal kits ? Thats more expensive than airplane parts. Course they know they got you and charge accordingly

[@buckhorncortez]

"They" also had to pay to have them manufactured and then had "their" money tied up sitting on a shelf until the dealer ordered the part, and then the dealer had money tied up sitting on a shelf generating $0.00 dollars until someone purchased the part. If you think it's such a lucrative market - go into the hydraulic seal business...

[@ACatKrom]

@@buckhorncortez I'd be surprised if a single one of those seals aren't off the shelf parts. I'd be shocked if deere has $5 their cost into one of those kits

[@hydraulicshop69]

@@ACatKrom yea there cheap

[@timmayer8723]

Buckhorn Cortez you are arguing with a crowd of regular joe technicians not accountants. As complicated as these many repairs look to be, the book keeping that brings them to the job site boggles the mind. Warrens knowledge and skill level are also mind boggling.