Case 580 super l series 2 powershift rebuild pt. 1

[@randomtexan3973]

Thanks for the videos. I haven’t worked on equipment in 30 years and even then, transmission rebuilds went to the home shop in Shawnee Mission, Kansas and just got swapped in the field shop. Good info.

[@billmonroe8826]

Damn, you don't cut the Forest Service any slack. lol I agree with you though!!! 🙂

[@olspanner]

Good to hear things are looking up for you and your family Warren. Still hoping you find Trouble! Amazed at the variety of power tools you guys have these days. Ratchets were hi tech. in my day! And I always hated shifting spanners.

[@Mauser304]

I was in the fire service for 25 years. We once purchased an engine with an Allison transmission. The transmission went south at about 9,000 miles. There was no record of the thing for parts. We eventually found out that it was a prototype transmission that only two of were made.

[@125sm3]

Great video Warren, glad things are looking good for you financially .

[@justastudentoftheworld3940]

Sorry about Trouble, I'm surprised he hasn't returned to your shop.

[@super6954]

The proper term for those adjustable wrenches is a Swedish nut lathe L.O.L, I hate working on farmer fix stuff when they've messed bolts nuts and hydraulic fittings up trying to get stuff apart or to stop it leaking in the field. It sounds like that machine was cheap for a reason if it's already had a transmission. Forestry must treat machines like farmers/construction guys who say F'it it's only a rental when they don't look after machines they hire in. I got to work on my JCB trans and rear axle this year I got seals and bearings going out, luckily that looks a lot easier to work on. When i do those style joints I very carefully take them apart and wrap the cross round with electrical tape so i don't have that problem dropping the cups and all the rollers fall out in the $#!t, it saves loads of hassle. Thanks for the video, take care.

[@jimdetchon3613]

When I worked for Case I got a chuckle out of that too. :-)

[@chrisfarabaugh3235]

5.9 Cummins are a good engine, but a major pain in the ass when they go south. 3100 series Cats are about the same deal. International was the way to go (not so much after 2010) for medium duty engines. In a case like this it's a works kit and a reman head, 3 days of labor and you're ready to roll again.

[@johnmills186]

I own one of those Super L series 2 with the 4 speed. Great farm machine for me.

[@jimagnew1643]

I wish he had stated what year back on this is, I've been trying to find out how you go about getting that little round screen out of the side of the transmission?

[@stevesmith5727]

Warren, young Trouble, he was a character, they do creep under your skin. Daisy is missing him too. It's really sad about him. Steve UK

[@buffalostate1]

Hope all is well .love the vids man , keep them coming.

[@saintsarecoming13]

If I was closer I'd come get that 12v underway for you. Sorry again about Trouble and I hope you find him. It never fails, every time you're under a machine with a bucket of oil everything falls in the oil. If I had a bucket of oil under the genset at the front of an RV and I was at the back working and I dropped a wrench, right into the oil it goes.

[@oddwad6290]

Hi , your work work is impressive . Do you think a pit would help on servicing the backhoes and heavy trucks ?

[@oldfarmer4700]

I bought a 1998 12 valve and it used the shit out of oil, old timer bought it new and just idled around his farm and never worked it. Probably had a half million hours on it but only 98 thousand miles. If that service truck was a company truck I bet it was idled lots and the cylinders are smooth as glass if it's using oil. The local electric and phone company trucks like the one you have they start them in the morning and turn them off at quitting time. Always running even during their nap times and two hour lunches. Lol

[@prevost8686]

I love you dude and I ain’t no fag. I absolutely hope you succeed. My son is a US Marine diesel tech on the amphibious assault units. He’d make you a hellacious hand. I taught him respect and the Marines added to my training. Hope you make it sir.

[@johnr8476]

looks easy to me, my old 580B doesn't have those nice drive shafts , have to split the tractor to get at the clutch or transmission, after you remove the hoe and loader.

[@amunderdog]

Same as the 580K; the first models had horrible transmissions. By Phase three in the 90's they had the bugs worked out of the whole machine. It was still miserable on the road.

[@mohamadrizal3773]

Hi warren..can i have a manual book or guideline to operate this machine for this model? Thank you.

[@jonathanbreeding1390]

Hey bud sorry to hear about trouble. Just wondering if you have any videos on a 6.9 Ford rebuild. Really enjoy watching ya if I lived closer I would definitely get you to work on my stuff. By the way I seen the battery powered ratchet so I had to have one works great.

[@markcoulthard5502]

Daisy will be missing Trouble, that will be why she is out of sorts.Those adjustable spanners that round the corners off nuts are known as, Nut Fuckers, in New Zealand.

[@DoRC]

Adjustable wrenches get a bad rep because people use cheap ones and/or don't use them properly. A good quality adjustable wrench used properly won't round a bolt any more than an open end wrench will.

[@MrPaul1f]

Agree, adjustables arent my imediate go too but can be a real time saver. In the workshop ill soonest get the right sized spanner but fixing something broken down in the field with limited tools and my adjustables are my go too. I have a variety of bahco adjustables and these are well made certainly not nut rounders.

[@rickgranger7754]

Now its a toe reckin knuckle bustin spanner wrench. LOL couldnt do field work without one!! HAHA.

[@adhdieseltech236]

I have never stripped out a hydraulic hose with my adjustable because I only use it on fittings bigger than an inch

[@chenderson4969]

Could you bump up your PTO HI idle warren? Having it idling while you use the crane and air compressor wouldn’t be doing those pistons and liners any favours, would hate for you to glass up the new internals.

[@KG-yn9qi]

Okay Im confused you have not found trouble? As of 4/19 watching this video your saying you don't know where he is?? But seen you petting him in another video just before this one???

[@farmark457]

How many miles/hrs on your service truck? Thx

[@oliverknapp3104]

What kind and where do you get those orange gloves you are using in the video

[@jimmyaber5920]

I’m convinced that they could fix low producing oil wells by throwing transmissions around the wellhead. Nothing produces oil like a transmission

[@4X4F250Diesel]

Know the pain my service truck dt466 just lost a liner oring dumped all the coolant to the oil, time for a rebo

[@blacksmoke5009]

Matt sorry to hear that probably #6 let go hope you get her back n running take care now

[@4X4F250Diesel]

Thanks I have just got it in the shop hope to have it ready by next Friday

[@ronhart4166]

Well how bout that, Warren is wearing gloves !! Your body will go through withdraws for a few months and a intense thirst for petroleum will occur 😜 They are definitely hard to get use to! Warren take a snap shot of your hands and compare them in a couple months. My kids talked about my hands for months 😂 I can only imagine what is in our bodies !!

[@blake9361]

luv vids luv your dogs keep at er

[@melgoss64]

Have ya found trouble yet?

[@hakan9366]

Very Nice AHI..

[@Harvester5000]

I noticed you started wearing gloves

[@richardbohlingsr3490]

Surprise, surprise another reman transmission. I'll get you now or I'll get you later. 8-)

[@knowltek]

Cat 3126 been nice in the fl70...hehe. Just saying....

[@jsbackhoeop8180]

Powershift was an option when the l series 2 come out. The powershift trans was terrible, slow sluggish. Best backhoe ever made and so much stronger with the standard shuttle trans

[@williamreese2477]

I have 98 580 super L series 2 but has the carrao trans. What is powershift? And i can't find a diff lock anywhere but in video Warren mentioned line for different lock.mine is 4wd if that matters

[@jsbackhoeop8180]

@@williamreese2477 powershift would have the 1234 gears on the fnr lever and regular is on a shift lever on the right side of the steering column. Early L’s had a pedal to the far left, series 2 had a black button on the loader lever for dif lock

[@williamreese2477]

@@jsbackhoeop8180 wow.u have answered some questions noone else could.thank you so much.

[@jsbackhoeop8180]

@@williamreese2477 follow my channel, if you need help don’t be afraid to ask questions

[@williamreese2477]

@@jsbackhoeop8180 Sorry to bother you but your knowledge is needed once again.My case 580 super l 4wd only spins 1 wheel on front.if I turn wheel then other side spins like a traction transfer .is this right or should both front wheels pull together?

[@johnschmidt1988]

You go to rebulid that engine you might check out bruce wilson s channel he could help you get the best parts for that engine.

[@robertstibz9506]

Ye the not knowing is bad, always wondering what if :-( hard to even forget when you don't know. Money.... my retired mate is tighter than a ducks ass, complains if you open the car window when he's driving, says its bad on fuel economy, he's not short of money, just won't spend any, will sit in the cold at home rather than have the gas fire on lol

[@frankvacanti5277]

Why the gloves? I've started wearing them myself. Old lady's orders

[@prevost8686]

Cancerous materials can enter through your hands just as easily as if you drank them. That’s why the most powerful painkillers are administered through patches through your SKIN. I’ve been in this for over 30 years. I wish to God everyday that I would’ve taken better care of myself. If only younger dudes would listen to us older farts. We aren’t nearly as stupid as you think we are.

[@1112223333111]

cant win for losin. wish I could help ya

[@prevost8686]

If you’re going to be in business for yourself you MUST have the mentality that you’re going to die trying to make a living. If you don’t have that mentality, you need to work for someone else. Most people don’t believe me when I say that I made more money working for someone else but I didn’t have any freedom. Freedom is what drives successful small business owners.

[@super6954]

@@prevost8686 Correct I'm a self employed mechanic to, I'm heading off this weekend to help my girlfriends employers moving business locations. All their staff is having to work during the whole of Easter without a choice, and will pay the overtime to the government. I just said i'd go help as i got nothing better I wanted to do this holiday weekend it was my choice to work there or not.