Please feel free to give me a call 📞 01274 640028 email westyorkshireengines@gmail.com
Пікірлер: 41
@BinJuice16302 жыл бұрын
I'm looking at doing this to my R51 Pathfinder in the next few months. Thank you for making such a remarkable catalogue of videos. incredibly useful.
@TheOzflyer2 жыл бұрын
Gday Des, yep your firecracker video was entertaining to watch, I remember having cracker night when I was a Kid in Australia, they banned it years ago so I was slightly jealous of the fun your guys were having 😂 Thanks for the videos, the advice you give and your willingness to help us all over the world, you’re a top fella Cheers! 👍
@reeffaintas2 жыл бұрын
Once again...we'll explained, great advice...good stuff mate.
@paulhudson2312 жыл бұрын
It's obvious that you have done a few of these. I like to wrench on my own cars but after this vid I would not want to attempt it. Good stuff!
@westyorkshireengineservice91602 жыл бұрын
Cheers buddy
@AndyH-13 Жыл бұрын
How did you work out that it was a cracked head and not a leaking head gasket prior to removing. I have one that has over heated and is now pushing coolant out if the radiator with the cap removed when cranked over, but won’t start.
@ausmaniac2 жыл бұрын
This is exactly what I've been doing the last 2 days. I pull the front bar, rad support and everything off for walk in access..
@stealthslayer44062 жыл бұрын
Hi mate love ya videos, Quick question, is it a easy job putting the exhaust and inlet manifolds on after installing the head, I was leaning more to that way as it’s lighter and I have nobody to lend me a hand on the installation, cheers.
@westyorkshireengineservice91602 жыл бұрын
Hi pal if your on your own leave the manifolds off its just easier doing on the bench many thanks Des.
@stealthslayer44062 жыл бұрын
@@westyorkshireengineservice9160 cheers mate 👍🏽
@nearsightedfromthefarside6534 Жыл бұрын
Des, does this info stand with a 56 plate nav?. Cheers buddy
@mikehants90522 жыл бұрын
Hi Guys, just found your channel it is very informative. I have 2 questions for you. I have an 09 plate D40 Adventura Auto 2.5 1) I have a buzzing sound when press accelarator pedal no lights on dash no loss of power. stops making noise when take foot off power. 2) She revs high at low speed and seems to change gear when foot comes off gas pedal. Are these connected am trying to fix myself.
@pengerlengpengerleng39422 жыл бұрын
Hi Dess very disappointed that you are a let down. Videos are great its a pity you can't back it up. The navara you did the chain conversion on failed as you know. You couldn't find the problem or wouldn't admit it! The company that repaired ur bodges had a good laugh and said they are greatfull of all the business u unknowingly send them!! Useless avoid this company never got a service or money back! RIPPER
@westyorkshireengineservice91602 жыл бұрын
Haha 😆 good try buddy
@ianbotes46742 ай бұрын
How do you remove the timing chain and cover
@lesilestivany7839 Жыл бұрын
G,day 🇦🇺 I've got a 2009 D40, had the mechanics change the engine 12months ago, now this engine is starting to play up,,, why are these Nissan engines Lennon's?? Just wondering if a different brand of engine can be used,, Cummins, Duramax, or some other brand that has a proven reliability history 🤔????
@garyaustin72542 жыл бұрын
Cracking video pal
@westyorkshireengineservice91602 жыл бұрын
Thanks buddy
@hannaabel387 Жыл бұрын
Hi mate I'm from Australia I was wondering if the 2012 pathfinder yd25 head can be surfaced planned
@westyorkshireengineservice9160 Жыл бұрын
yes mate
@johnathanfatzz44812 жыл бұрын
What causes a d40 check light to remain on and vehicle doesn't cross 3 thousand rpm I change pump and same thing
@westyorkshireengineservice91602 жыл бұрын
You will need to get the fault code then i can tell you what to do to fix it
@johnathanfatzz44812 жыл бұрын
@@westyorkshireengineservice9160 ok thanks I will do that today and get back to you 👍
@jgsadventures16732 жыл бұрын
good stuff
@westyorkshireengineservice91602 жыл бұрын
Thanks pal
@MahlatseMaake-jz7zy Жыл бұрын
My np300 2.5 tdi is getting wet with oil in the aircooler what the problem
@westyorkshireengineservice9160 Жыл бұрын
DPF back pressure
@christopherrogers0082 жыл бұрын
Des and the team . I'm currently getting prices at the moment to rebuild my d40 navara yd25 euro 4 engine. Cracked a head 8 weeks ago. I found a lot of scoring in the block. My mechanic suggested a rebuild. $4500 for an exchange engine I'm looking at .
@westyorkshireengineservice91602 жыл бұрын
And what would he be doing.for example what would be new and what would be reconditioned?
@christopherrogers0082 жыл бұрын
I'm hoping everything will be new. New injectors and injector pump and a duplex timing chain upgrade. I've done all my pricing up but I'm waiting to see what the mechanics pricing is to see if I've found cheaper or not
@westyorkshireengineservice91602 жыл бұрын
Christopher Rogers injectors for recon are £150 +vat each or new £250 +vat each that’s in the uk fuel pump are between £600 to £1000 cylinder head £600 including gaskets timing chain £475 upgrade kit big end and main bearings £80 piston rings around £50 you will definitely need oil pump £240 and oil cooler £116 then your block will need to be sorted and your crank will need crack tested.So hopefully this has given you some idea
@christopherrogers0082 жыл бұрын
Could you guys explain the difference with the YD25 engine between the VSK d40 navara and the MNT d40 navara please . I'm having trouble getting parts for the MNT yd25 but I can find parts for the VSK YD25 engine really easy. Will a VSK YD25 engine fit and work I'm a MNT Thai build d40 navara ?
@chrisgentles33432 жыл бұрын
Any d22 zd30 head removal/replacement vid
@westyorkshireengineservice91602 жыл бұрын
No sorry buddy 😊
@p38steve0 Жыл бұрын
I’ve got to the point of taking the chain off but see the chain has a rear housing, didn’t know if this has locating dowels or if the head will of come out from hide it ?
@westyorkshireengineservice9160 Жыл бұрын
Sorry but you have lost me
@p38steve0 Жыл бұрын
Does the head come out past alloy housing between the chain and head. Or does the whole front of the engine need stripping ?
@westyorkshireengineservice9160 Жыл бұрын
@@p38steve0 So your removing the cylinder head if that’s what your doing you need to remove the top timing chain and the 10 mil bolts also at the back of the head you will find a 12 mil bolt you will also have to remove All the best Des