Diy install video of the best seadoo spark exhaust system.
Пікірлер: 61
@dozer8065 Жыл бұрын
i would just take the top half off, it makes it easier to install and on top of that you can put a fresh set of plugs in, do a oil change much easier and put in a fresh battery. get a strap type oil filter removal tool and it makes it much easier to remove the ring, no need to tap on it to remove.
@cowboybishopvids6570 Жыл бұрын
Don’t need a fresh set of plugs or oil change all the time. Some people mod after they have already done. Take the top all the way off if you like. That’s not wrong it’s just another way.
@TurnerDH7774 жыл бұрын
Sheeeesh just picked up a 2 3/4 hole saw going to be cutting a whole in my 2021 trixx with only one ride on it. Gotta do it for Bishop @WJ 😄
@cowboybishopvids65704 жыл бұрын
TurnerDH777 awesome will be worth it . Easy fit and sounds great
@TurnerDH7774 жыл бұрын
Cowboy Bishop vids Uploaded a video go check it out...the install went super easy thanks to your video!
@AchikSarih2 ай бұрын
Merci beaucoup ❤❤❤❤❤❤❤
@wadekingsman29084 жыл бұрын
Notice all the green on the chop scissors hahaha
@jakewoolard35885 жыл бұрын
Great video.
@Toten_6515 жыл бұрын
Bro thank ya so much man this video actually helped me out alot
@pinballguru3 жыл бұрын
I am your newest fan......whats the best way to have you work on my new Seadoo when I get it??
@EluderRacing4 жыл бұрын
great video!! I was wondering do you offer a kit that retains the original exhaust exit? if I didn't want to drill the other whole?
@cowboybishopvids65704 жыл бұрын
Eluder Racing yes we do. The free flow exhaust system goes out of the oem exhaust exit. We have sound clips of that one also. wetjetperformance.com/shop/ols/products/wet-jet-performance-spark-free-flow-exhaust
@marcelmorales2048 Жыл бұрын
I need one for a RXT X 300 🎉
@cowboybishopvids6570 Жыл бұрын
We have them in stock
@lucreziaricupero773 Жыл бұрын
Buon lavoro p, peccato quella porcheria col silicone all'interno, inutile
@cowboybishopvids6570 Жыл бұрын
Wetjetperformance.com
@Aliganemmm2 жыл бұрын
Does putting an exhaust effects the jet ski or has any effects on the engine?
@cowboybishopvids65702 жыл бұрын
Zero problems for your engine
@jeremynelson84964 жыл бұрын
I think I need to get me some real good beats and then everything will seal up good? lol nice
@cowboybishopvids65704 жыл бұрын
Jeremy Nelson hahaha might be onto something lol
@coltonwiles81913 жыл бұрын
Why do people do this? The make one that hooks up where the old one was and saves the time, effort, and overall worry of leaking in the future.
@iBelongOutdoors4 жыл бұрын
Recently got a spark and got a few questions about a project I’m tryna do, you got Ig or something so I can dm you send a few pics and see if you could be able to give me a few tips?
@cowboybishopvids65704 жыл бұрын
Emmanuel Williams congrats on your spark and we will be glad to help you out. Just message us on Facebook @ wet jet performance.
@iBelongOutdoors4 жыл бұрын
Bishop’s Reviews, diy, and fun vids I messaged you🤙🏿
@Lurch0944 жыл бұрын
What is the difference between the free flow vs the rear exit other than the exhaust tone?
@divyaboy4 жыл бұрын
Would it defeated the purpose if you used the same hole the outlet that you capped off
@cowboybishopvids65704 жыл бұрын
Aldez yes defeats the purpose. The oem hole is in the pump tunnel and vibrates the hull. Exhaust going out the rear looks better and it’s louder. Plus you get zero hull vibration shooting the exhaust behind you versus underneath you. Rear exit exhaust is the way to go
@tysonbaar55335 жыл бұрын
what about the water box is modified?
@cowboybishopvids65705 жыл бұрын
tyson Baar we cut them open and remove the baffle and add a waffle grate to give it a distinct sound. Saving you money on buying an aftermarket waterbox. Wetjetperformance.com
@gbuenfilbalmes5 жыл бұрын
the water box is aluminum?? or steel??
@cowboybishopvids65705 жыл бұрын
gerardo buenfil oem is aluminum
@gbuenfilbalmes5 жыл бұрын
@@cowboybishopvids6570 thanks
@levidavidhemopo4 жыл бұрын
Can u use this exhaust for the 2018 trix 3up model ?
@philippecharlet54614 жыл бұрын
No , only for the 2 up Model
@DanielRodriguez-qc4xs4 жыл бұрын
Does it help on performance wise?
@adailjr934 жыл бұрын
it's OK? i'm from brazil, i would like to take a doubt, what did you do inside the waterbox ??
@cowboybishopvids65704 жыл бұрын
Adail Junior purchase one 😉
@adailjr934 жыл бұрын
@@cowboybishopvids6570 ahahahahaha, I have a spark year 2019, and I want to make the exhaust noisy, but I don't know what they do in the waterbox ...
@cowboybishopvids65704 жыл бұрын
Just get your welder to look at the inside and alter it. We don’t advise or tell people what to do.
@truckguy6.74 жыл бұрын
Just got two new sparks. Any chance of the ski getting an enema and damaging something sliding backwards? I have an older 2 stroke and I noticed exhaust flaps on those.....just wondering
@cowboybishopvids65704 жыл бұрын
Truckguy Truckguy no chance unless you leave it upside down for 5-10 minutes. The water box holds any water back from getting into your engine. Over 1500 exhaust sold and zero motor lock ups do to an exhaust.
@codyhill86214 жыл бұрын
Will this fix my high exhaust temp code it keeps throwing out?
@cowboybishopvids65704 жыл бұрын
Cody Hill when are you getting an exhaust code. If you are getting a temp code you sensor might be bad on the waterbox. The rear exhaust makes more flow but you shouldn’t be getting a temp code. If you are just putting around in a circle for awhile it will go off from time to time
@codyhill86214 жыл бұрын
Bishop’s Reviews, diy, and fun vids long story short. 2 trees fell onto my spark in 2017. I finally refurbished two hulls into one and it worked! Had it on the water going full speed for some time and then the code came out. White smoke Was coming out from the back and just running limp. It hasn’t ran since 2017 and only has 13 hours on it.
@codyhill86214 жыл бұрын
I currently have it being flushed and running it. The alarm came on went limp and then went off. Now sitting in idle it doesn’t come in.
@cowboybishopvids65704 жыл бұрын
Cody Hill you probably have a bad temp sensor and make sure you don’t have something clogged in the jet pump
@eddiefatscher96723 жыл бұрын
can i order just the plug for the jet pump tunnel exit from wet jet?
@cowboybishopvids65703 жыл бұрын
Yes 60 bucks just call us or message on fb
@videntemusic24653 жыл бұрын
Hi wat silicone you usé?
@ashtonmchenry61374 жыл бұрын
Why did you put the water box back on it you could have made it sound a lot better by doing delete water box
@cowboybishopvids65704 жыл бұрын
Ashton Mchenry the purpose of the water box is to protect your motor. A delete puts your motor at major risk of a hydro lock. Especially if you flip it. A straight pipe is loud as hell and you damn near need ear plugs to ride it. We wouldn’t promote a product that would put your motor at risk.
@ashtonmchenry61374 жыл бұрын
Bishop’s Reviews, diy, and fun vids thanks bro
@samlee10553 жыл бұрын
Which exhaust is this?
@cowboybishopvids65703 жыл бұрын
Standard rear exit
@aarongalvan82124 жыл бұрын
Do you have a rear exhaust for 2019 spark 3up?
@cowboybishopvids65704 жыл бұрын
We have the free flow system. You can run a rear exit exhaust with the deck on the back. You have to take that off and make it a 2 up to run a rear exit . Here is the free flow exhaust link. wetjetperformance.com/shop?olsPage=products%2Fwet-jet-performance-spark-free-flow-exhaust
@theravedaddy5 жыл бұрын
9:50, thats 1 hellava buttplug. Aint no way thats popping out no matter how good you squeel like a pig.....
@AndersonERockefeller5 жыл бұрын
Hmm...400 bucks is alot of money for claps, rubber hose, aluminum pipe and aluminum back piece.
@cowboybishopvids65705 жыл бұрын
Anderson E Rockefeller who said the exhaust system is 400 bucks ? It’s 229.99 and that’s the lowest price on the market . Go get yourself a 100k Cnc machine to make aluminum parts and you will understand how the cost of products is factored. Nobody makes a $400 rear exit exhaust