What a mess.... wasn't expecting to find this 😣

We decided to put the 1956 Plymouth up on the hoist to show what the new floor looks like from underneath and discovered MORE issues. This is starting to get discouraging 😣
IF YOU ENJOYED WATCHING:
subscribe, leave a comment and hit the like button
/ badchad
CHECK OUT OUR MERCHANDISE HERE:
www.hiltzautoc...
FOLLOW US ON SOCIAL MEDIA:
/ badchadcustoms
/ badchadcustoms
/ macintyrejn
/ ___jolene
MAILING ADDRESS:
Hiltz Auto Co.
RR3
Canning, NS
B0P 1H0
#badchad #1956plymouth #metalfabrication #rustrepair #quarterpanelrepair #fabrication #sheetmetalrepair #restoration #carrestoration #quarterpanelreplacement #floorrepair

[@joefalcone6164]

I know you didn’t intend to do a total restoration, but it seems the car has a different idea, what you have done so far is of such high quality, that I think. You should change your mind and at least paint it , new interior , get the motor running well, give it the new life it deserves after all your hard work. These are some of your best videos of your entire show over the years. Love the way you share some of the work with the two other guys also. And off course Jolene’s camera work shows it all being done in real time. Bravo ! Joe Falcone Long Island NY

[@brucewitcpalek5120]

I agree with you

[@stephencoddington7383]

I dont care what anyone says that a hell of a job,your not tryjn to copy the floor that was in it youre just getting rid of the rust with an all new floor I bet some of these commiting negative have never even touched a welder 👍Good job

[@redneck4life127]

I agree with joefalcone6164 %100..u have done so much hard work now and made the main part all good again..what's a little more and have everything good and looking great..we all know you didn't plan on doing this much to it but for what work n time u have in it already it deserves to have new life and have someone like you looking after it..great job chad,Jolene and others that helped!!

[@heyjer8000]

Well said Joe!

[@robertrwhitten]

Good to see this two working together. Nathan sure does give Chad's projects the mechanical support they need.

[@dennisparker4935]

one of chads best qualities is he is not intimidated by any problem that presents itself.. he simply says lets fix it! .as always Joleen deserves so much credit for the outstanding camera work.. its SO GOOD you forget she`s there she has excellent intuition and can anticipate what WE want to see and makes it happen with the camera ! well done! my dad had a 56 2 tone blue and white 4 door.. many fond memories . my older brother still has the dent in his skull from eating the rear fin while riding his bikes recklessly in the driveway .. wasn't looking and BAM !! LOL !

[@danielplummer6385]

Hi Chad, Jolene, Nathan, & Fina. Good work Chad & Nathan with the war on rust, the Plymouth was definitely hiding alot of rust. As Chad has said that is why rust repair is so expensive the more you tear into a car the more you find. That is why if you get a quote from a shop at all they will high ball the estimate so that they don't have to stop work and get a hold of you for the OK to do the added work! Jolene excellent camera work as always, you really get in there and get the shots for us! Fina was doing a great job on her work as well!

[@andrewalexander5871]

Nice work! Great to see Chad and Nathan working together to get the job done!

[@williamdenny891]

You are so fortunate for having Nathan as part of your crew 👍👍👍👍👍

[@atbien21]

Jolene, you do such an awesome job! Just quietly in the background recording everything. Being an amateur photographer and videographer myself; I know it's not as easy some would think. I have had times when my arms were just so tired I didn't think could hold them up anymore. Kudos to you Jolene. Oh, and good job guys!☺

[@RafaelLopez-fx5rc]

No comprendo todo meló puedes mandar traducido pliz

[@jimwhittemore1610]

Way above and beyond, what a job this has turned out to be!

[@alanrouse7285]

Just leave that leaf spring off, it was a backyard lift kit they used to do in the '50s & '60s for clearance on dirt roads so you didn't bottom out. Also, get them rear leaf drop shackles off too, it will ride much better.

[@davidhiggins3600]

Someone put the shackles on to raise the car as the springs are worn out. Taking them off will lower it. Might have to put a dolly wheel on the diff to stop it dragging on the road.😅

[@raystine1055]

I enjoy watching Doug and Nathan work on projects with Chad. They’re both very capable and seem like great guys. They seem to be great guys it’d be fun to hang out with!

[@auto.impulse]

didnt expect it :O why not buddy !? the whole thing was rusted what did you expect to find XD

[@larryrushing500]

Very nice! Just adapt to anything that pops up. Jolene did a great job producing this episode.

[@claudeperron8197]

Nathan is priceless, worth his weight in gold ! Seems to be very knowledgeable and able to tackle anything and everything. Great job on the floor Chad and Hope Jolene isn't too tired to score on the net! Hamilton, Ont.

[@ROBByJONEs-2]

there must be other ppl out there with Chads abilities..ive never see a model t cross spring idea fitted to one of these cars...good job or not its certainly unique...i DO like how fast Chad and Nathan looked / decided on a course of action..power to you both Sirs...we're still getting discovery bad chad series on local tv here and conparing the old shows to todays content nothing has waned or changed..this show on YT is unique for look and learn..highly recomended it to my friends.. ROBBY JONES in OZ

[@brucewitcpalek5120]

Man that’s a great job bad Chad !! Looks so nice 😊

[@larrybailey43]

Aww Hi Fina !

[@AndyH-13]

Great team work and just getting it done.

[@dougduggan8461]

Great work Chad I could never fix that under carriage so quick when I was in the trade well done. Doug

[@canmanjv]

The underneath looks really Good! A good job well done.

[@ejharrop1416]

Fina is such a diva, getting a close up shot in the middle of the recording. 😊

[@anthonypsmith1959]

Following this build great job Chad .

[@frankkirby5763]

Chad, that floor is amazing. Great work. Best wishes.

[@VinoRatRodbuilds]

" Fina " Give her all u can now! Time is short! I don't have my German Shepherd bolo anymore, I sure do miss him.

[@Artaxerses1945]

You and Doug really work good together ! Keep up the respect shown!

[@daledean6860]

The underneath of the floorboard looks great. Excellent job.

[@brucewitcpalek5120]

Great job Nathan !! The Thunder bird is looking 👀 good !! Thing are really moving along at bad Chad’ and queen Jolene fab shop !!

[@CarlTeskey]

Nice looking floor guys, great job to all of you working,, Jolene, Chad, Doug and Nathan.

[@gcjabo]

Love the Thunderbird except for the shifter. Great job, Chad and Nathan and Doug and especially Jolene!!! Oh, and Fina!

[@michaelvandenhoy1021]

Exellent metalwork and fabrication done on this old gal. Yes there were blemishes found, but overall great work done.

[@MoParRus340]

I’m blown away. I never would have guessed from the look of that car before you started that it would be that bad.

[@troyadams1076]

Looking good Chad and Jolene

[@hoosejamess]

Really enjoyed watching you two guys work together. Jolene..great as always camera action.

[@davidmorrison3697]

67 years of life and rust. Because I was born in 1955 and I'm 68 years old.😮😮😮😮😮😮

[@motercycle80]

Amazing job 👍 going to be a very nice driver that anyone would be proud to drive and show off

[@johnkranz4004]

Very nice repair Chad and Nate Jolene

[@jonathangrubbs2329]

This metal work is excellent. Really impressed, great job. Good luck on the rest of the car chad.

[@larrybailey43]

Wow I never seen a front end done up like that before. Is that really Stock ?

[@dalesmith112]

Amazing craftsmanship Chad... Your work is beyond reproach... And Jolene does an impeccable job of bringing it to us at every imaginable angle. 👍😁

[@joeyb.9858]

Chad's work in the Plymouth is AWESOME... Would love to see it in paint and cruising down the road ✌️😎

[@arnolau]

A BIG thanks to your HELPING HAND AND WONDERFUL assistant, He really is a MECHANIC !!!!

[@terrallputnam7979]

It looks like you are making that into a new car. It looks really good!

[@davidoutten6913]

Awesomeness! I would lost if I could not watch my Bad Chad and Queen Jolene. Great terrific folks you all are. The knowledge, the message that you get across, everything about you and the show is the best. Been watching since the start of the match box days. I cannot express my respect and gratitude to you both for so much learning and enjoyment. Thank you and God bless you all! ❤

[@nocandopdx]

Every time i watch i don't know what's more impressive, the work that's being done, or Jolene's cinematography. She's holding that camera arms up in the air for over an hour straight, there's no jerking, everything is shot in the center of the frame, she knows when to get right up close, when to widen the angle, when to film the dog, and notice she's never in their way, ever, not once. Clean Jolene the camera queen the best that this platform has ever seen

[@chrismedaris4873]

Love this car great job u all love from Arizona ❤

[@singingmealody1238]

Hi Dave from England why don't you get that lift serviced and the legs so they pull out easy the floor looks great T Bird coming on good but don't like the shifter

[@bobballew6087]

👀 looking great 👍🏻 really enjoyed watching you two guys work together.

[@mathysbotha9832]

Hi all from Durban RSA

[@MrAllan9]

The first thing I look at is the frame system, if it's solid it's a project, if it's rotted out its a parts car.

[@johnholst8579]

Chad, have you checked the hydraulic oil level on the hoist.😮

[@crazywickedcustoms7272]

Floors looking good

[@johnknopp7663]

Great craftmanship!!

[@user-vz5gq9lw1v]

Chad did you check this car over before you purchased it ?

[@1944chevytruck]

awesome!

[@markplant2184]

Awesome, Thanks

[@juanrubio1616]

Nice job 😊

[@richardburro770]

Great Job by Chad, Joleen and Nathan. Very interesting video‼

[@sizzler66]

Every time he uses that electric drill, he cracks me up. Dewalt battery drill is so much easier, and they have a clutch .

[@dougpeak7591]

I’ve said something about cordless tools many times .I think he don’t like them

[@scottvanaken929]

I have enjoyed the work you have done on the Plymouth probably more than any other project I have seen you work on in the year or so I've been watching your channel.

[@carmeloblanda6970]

Floor looks great

[@Cliffyzjiffy]

I seen that little mirror on driver side door

[@fredhoman6101]

Finding more and more issues, but you're gonna nail them with the awesome help of Nathan and Doug as well, and showing us the whole process thanks to the great filming by Jolene

[@torino71torino]

Chad is a bad ass love this car

[@franklindner8259]

Keeps looking better.

[@RoninDosho]

That's amazing work!. Awesome video!

[@michaeldemontigny3017]

Looking awesome you got great helpers

[@richardjennex6583]

Good evening Jolene and chad

[@tedwalker1370]

Just something you may not have thought of. Doesn't the outside air vent in front of the windshield have to drain out at the front of the rocker panels?

[@fun6243]

What a sled. Nice.

[@gilbertboulanger8536]

Hi Chad and Jolene from Trois-Rivieres Quebec

[@clivefisher2335]

Nathan is so good at what he does. Chad and Nathan work well together, good team work

[@peterskelsey5024]

Looks like the roof was the only thing holding it together. Its nearly brand new again. Wow 👌

[@jackbrydges7673]

Nathan is just another chad waiting in line also learning from a really. Talented person.

[@forreststewart5940]

This Savoy is looking fantastic!

[@Macbetula-yl8wq]

The underneath looks good 👍

[@SRRS478]

awesome work Chad

[@scottiestamper4659]

The car is looking real nice Bro

[@verlynnygaard4735]

WOW LOOKS LIKE BAD CHAD READY TO JOIN QUEEN JOLENE ON HER RUNS

[@erefaancozynmoegamat6375]

Great work Chad keep it up

[@nelsonmattoon150]

Jolene you are doing a great job with the camera. You're the best ❤️

[@war7334]

I love that Fina sign in the background..

[@marysambrizendine1012]

The floor is outstanding Chad and Jolene 👍

[@user-nb6nr6vm5i]

teacher chad is doing it his way and us as students of chadjolene college are learning love this show being in the auto electrical bussiness for 50 years i think this is awesome regards from sunny south africa

[@jparish2469]

oooo shiny floor .and the bird is get fixed up inbetween love it .thanks as always

[@joelav7222]

Get er done! ✅

[@hvac42long1]

I don’t understand the surprises and unexpected parts. It seems with so much experience and a jack, a thorough inspection would have revealed most if not all of the issues being addressed on this car. If your always in such a rush to do everything so fast, then your going to miss a lot and have all kinds of surprises. That’s true in any field. Sorry but I call it the way I see it. You can’t just expect to get lucky at a glance, or feel like you deserve a good deal because your a nice guy. If your not thorough your setting yourself up for disappointment. The excuse of this being a car and it hiding the unexpected or unforeseen is just weak. We diagnose and estimate mechanical systems in commercial/industrial applications well into the hundreds of thousands of dollars (some in the millions), and manage not only cost, schedule, but a savings to investment strategy. So it’s not impossible or even terribly difficult to quote accurately when it comes to a car. It simply takes a little time and patience. Calm is a superpower.

[@nigcor]

wow look awesome

[@brianvandemortel6710]

Another fine video

[@jackdaniels2657]

Once I seen dem floor boards forget the rest this thing is solid

[@user-qq4sk8ec2b]

Good job like it

[@AngelRivera-to8je]

BAD SHAD .THE BEST.....EL MEJOR..PUERTO RICO LOVER

[@davesnow2540]

Hello Fina !!!

[@antoniocovarrubias7831]

It’s incredible the amount of work Chad put into this Plymouth, need to drill a hole on that plate so water can run down, looks great good job and Joline shows all angles she’s better with the camera everyday. Greetings from California.

[@skywatcher6064]

For sure Antonio, I told him to cut a drain hole in it before he welded it on, he,s busy too workin harder. These guys are great.

[@UberLummox]

They really should show a little more class and edit all the tool chasing scenes. Why did he shape the drivetrain tunnel like that? Now no factory style carpet kit will ever fit in that car for the rest of it's not very valuable life. Not gonna carpet it?

[@skywatcher6064]

@@UberLummox Just goes to show that the American dream is alive in Nova Scotia, anybody can get rich from the WWW, even Chad, no wonder he couldnt keep a job elsewhere, he seems incapable of teamwork and lacks organizational skills. However, he is a great backyard fabricator and he loves vintage tin, shares what he has learned and doesnt give up. Amazing how some work harder, not smarter, the opposite is an aquired skill. Maybe he,s just a slow learner, makes for interesting viewing though. We can learn alot from mistakes made, I know, I make plenty. Sorry Chad.

[@UberLummox]

@@skywatcher6064 Yeah he's kind of a meat hammer in a sushi shop. More tattoos than brains, his sense of styling is FUCT, but you gotta admire his tenacity!

[@johnholbrook2921]

Great job, you can save it!

[@richardhernandez2828]

You guys make a good team!!

[@RoadkillXoutlaw]

You start to ask yourself if the finished product is worth the time money and effort . it isnt on this job ,but its great for content. All the things you might do to restore a car all rolled in one. I am enjoying watching them address all of these issues. good stuff . It would be nice to see the underneath sandblasted and powdercoated or undercoated

[@StephenCann-to4mr]

Looks like car better than ever was it's lots of work but it's coming good keep up the good work Chad and Nathan and Jolene on camera

[@user-mw3ip9wr4i]

Looks like its a keeper with amount of work done on it🏎🏎🏎

[@billpickett8400]

Good job Chad 👍

[@andrewlowe7427]

Well done gang

[@jimcoplan9502]

This is turning into a full redo of sorts. Challenges can be interesting.

[@nelsonmattoon150]

If you ask me I think the Plymouth is saying you are going to do a full restoration