What a scam looks like?

[@alfadanhighperformanceoutb8416]

Hello Matthew, First I would like to commend you for your videos from the past, many of which I have watched over time. Unfortunately, the last few videos you have posted about ALFADAN are a gross misrepresentation of our company and our Big Block i4 engine project. With regards to the recent changes on our website, here are the facts. Six months ago, we started to work on our Reg A+ campaign. Per Federal regulations here in the USA, we are prohibited from disclosing, discussing or posting anything about the process. The differences you show from our first campaign to the current campaign are based on federal regulations that require us to include the disclaimers you have seen and outlined. These disclaimers are standard for any of these offerings and are there to protect the investors. Our company has now successfully completed and in depth financial and legal audit required by our federal laws. This process is created to make sure companies are legitimate and for the protection of all its investors. The completion of this process and compliance with the US Federal Government alone should clearly address many of your comments. All of the changes to our website we're completed weeks ago and were waiting for clearance before we could post them. Logos such as Amazon, KZbin and Freevalve were removed per legal requirements and nothing to do with your comments. We were waiting for the new campaign page to go live in order to implement the new changes. The video section of our site was set up because of the overwhelming number of emails we have been receiving. Our plan has been to post videos addressing these questions in order to inform the general public and hopefully reduce the volume of emails. Our engine is in fact being developed by Mahle and we are following the same process followed by most if not all the large OEM car companies. We are working hard to develop this engine and have a preset completion date, unlike many other companies that are in a perpetual R&D stage with no realistic focus on generating sales. Unlike other companies, we did not build a useless prototype to use as a Hollywood prop to entice people to invest. Our original two cylinder was used to test some materials and was built before engaging with Mahle. Having used that engine to raise money would have been dishonest and misleading. Instead, our process is exactly as we have stated and as recommended by Mahle. If you received my email then you should have my personal contact information. I look forward to speaking with anyone interested in our project. Albert 786-280-1246

[@funcounting]

It's all good but why do you need another mil though? That's really shady.

[@davidpierce7318]

Hit a nerve show me the money(where the money gone)

[@nenume00]

denying everything and saying "feel free to call me anytime to talk" is pure mob level scamming talk. Investors desirved a "holywood prop" more than just text on a web page. in fact, how much did you pay driving4answers for the video? or was it just a sad example of someone really wishing it was real just like the millions$ worth of investors?

[@TsunauticusIV]

My dad used to label these kinds of guys a PBS. Professional Bull -Sh*****s. 😂 They surround themselves with yes men and they also convince themselves the lies they perpetuate are actually true. They wholeheartedly believe what they are doing is right... and not a scam. These types of “professionals” can be found in nearly every major corporation.

[@sirkristoferTV]

Show your workings. You have shown nothing

[@Jonpilen]

"We may never have an operational product or service" "from October 13th 2017 Alfadan has incurred a net loss" sounds like a cracking investment opportunity.... Alberto Araujo has been associated with fourteen companies, two of the companies are still active while the remaining twelve are now listed as inactive...

[@dirtygarageguy]

Wait until you see what this mahle study says....

[@akkudakkupl]

They did a patent to troll scotch yoke engine designs (shouldn't ever been granted, nothing new or inventive) while not publishing anything about their proposed design. If that doesn't scream scam I don't know what does.

[@StarvingPixels]

They'll be crowdfunding a team of lawyers shortly.

[@KuroSanArts]

That static header on their site that covers half the page should be a criminal offence on its own......

[@600wheel]

Idiots in the comments sticking up for this thing are likely investors trying desperately to hold onto some hope that they will ever see a return on their money

[@archiedentone5950]

Return? It’s being blown left right and center.

[@600wheel]

@@archiedentone5950 I know that, you know that, they know that but they are praying that they are wrong anyone who makes a bad investment hold on to hope way longer than they should

[@jofknoll]

good job your on the ball with this matt

[@larryboles629]

You make me sick! You continue to defame Mr. Araujo and ALFADAN. You and the folks that are ready to jump on the scam wagon, how about getting one person who has been scammed out of their money by ALFADAN. If you can not, I do think that would be solid proof of your bullshit. Come on Ass Hat show us!

[@size1985]

If you look up the company's location on google maps you at least know where the money is going to

[@Nerezza1]

The funny thing is that whilst watching I got an ad for some vision improving pill scam 🤣

[@nauroticdax]

just a quick tip on aligning windows, if you click and hold the top of the window as if you are just moving it and drag the mouse so the cursor touches the edge of the screen all the way to the left or right it will take up half the screen on either side (to the top to maximise) you can also click the window so it is active then hold the windows key and use the direction arrows to do the same thing

[@minigpracing3068]

Have you contacted Mahle to see if they are really working with them? I would but I'm a nobody and doubt they would answer me.

[@dirtygarageguy]

Lol

[@sirkristoferTV]

That was my question

[@smhobiez]

If so, Mahle just do what they need to do, nothing wrong here.

[@dirtygarageguy]

I laughed because what would you expect them to say? There's 2 options. 1. They've never heard of alfadan. 2. Yes, we're doing a study for them. Let's just say I said to mahle, can you do a study on a design I have, it pretty much a design that has been around for 80 years, but I think I know better... Mahle "why yes we can do that, to the tune of $6m...." This isnt a confirmation of anything. Its like cold fusion, you might be a PhD, you might have 20 published papers, but your science is know sense. Even Einstein made fuck-ups based on belief. He thought quantum physics was bollocks...

[@smhobiez]

@@dirtygarageguy lol..precisely 👌

[@mrgonk3060]

There's lots of guys on KZbin knocking out amazing prototypes of all kinds of things with no money at all.... What I find most odd is that there is not even any conceptual drawings/animations provided. Presumably if there is any IPR it would be already be protected in law?

[@erikolafsen1645]

I haven't read all the comments here so apologies if somebody else have picked up on this point. Matt mentioned in one of his videos: "Why call it a marine engine? An engine is an engine!" or words to that effect. I think I know why. Outboard-engines: It is a less scrutinized niche products and, crucially, the people in the market for large capacity outboard-engines normally have a bob-or-two spare.

[@b_mb4948]

I recognize that Mahle video, they have it on their KZbin channel. It's called _MAHLE 3D-printed pistons for the PORSCHE 911 GT2 RS_ Link: kzbin.info/www/bejne/sKW6pJysfax_a5Y

[@theoriginalpauly]

I've said it before: don't trust anyone doing business out of Florida. Their law makes it difficult to impossible to recoup money from a scammer

[@trahar6257]

There’s a reason Wall Street is moving to Miami and it isn’t all taxes

[@600wheel]

The amount of crap Florida man does to your average newspaper article is enough for me to never consider trusting a Florida man

[@nobodynoone2500]

Sounds like bs. Source? The reason for all the "florida man" stuff is their open public documentation (aka Sunshine) laws that make things more transpartent than other states. I'm all for calling out scammers but some of the best motorsports companies in the world are in florida. Painting with too wide a brush is just ignorant predujice.

[@theoriginalpauly]

@@nobodynoone2500 Specifically, it's Florida's homestead law that allows scammers to keep their gains. No matter what, there's no way to take a person's Florida residence. It doesn't matter if your "home" includes a private airstrip, it's untouchable. I didn't say every business in Florida is a scam, but I'm not looking to figure out which is which. Easier to avoid the whole place.

[@nobodynoone2500]

@@theoriginalpauly What the hell does that have to do with legitimate businesses in florida? Put down the meth pipe.

[@gafrers]

Just more proof how much of a scam it is. Great job Matt

[@SuperGinkgo]

Loving the Dirty Techno intro Matt, you do pick a good hook. 🤘👍

[@benkingston5315]

Fuck yeah! Anyone know what the track is? Care to share Matt?

[@richardjones2151]

at your 14:25 video time i was praying for the 'go-go power rangers (wobbly upright wrong knee') clip!....informative critique thanks again Matt

[@saifcathum3423]

We need more people like you exposing scammers around the world. Let em have it! Well done. There are scams everywhere I look theses days. Rearrange the letters in the word S C A M and what do you get? Give you a clue, take a look around. What's do you see today that wasn't there before? The answer is staring you right in the face. Fitting the two words are anagrams of each other. Get It?

[@haavard1989]

I like that you call them the "Pahle Mowertrain" @5:48. Gonna put a sticker on my lawn mower now

[@dermotkelly4077]

Good video Matt. I looked at the new workshop you're going to have! Love the interior walls. Not all workshops have to be brick-built with plaster falling off the walls a nice looking tidy shop will make a happy working environment!

[@patrickhascall7401]

You are so spot on. Here is the problem... you can't cure stupid! No matter what you say, how often you say it, how much proof you show...ignorant, gullible people will never listen to reason and logic.

[@RulgertGhostalker]

when i do the math at the stated RPM, the charge barely finishes combustion as the exhaust valve is opening in some sort of dream world, devoid of combustion variables.... pressure slows down combustion....yet pressure is also a measure of efficiency. you couldn't get a decent pipe tune for the Alfadan motor to even fit on a boat, much less under the cowling..... but they say they are doing this without a turbocharger. it's either a scam, or they have lost their marbles.

[@nicholasgustavsson4927]

Who wants to invest in a monorail?

[@sirkristoferTV]

Monorail...

[@daboo2]

Only if you’re based in Florida.

[@rickybobby7660]

Stuff like this is rife in the wider engineering world especially when 7-8 figure grants are available with larger OEM’s/Tier1’s having departments dedicated to fund raising only for the project to ‘die’. The crowd sourcing gig is just a more direct approach with less oversight. A fool and their money are easily parted, let them crack on

[@600wheel]

Yes let them crack on until of course they scam someone you care about

[@archiedentone5950]

Well the SEC will be looking into this you can bank on that. The problem is the people will likely not get anything back on their investment

[@600wheel]

@@archiedentone5950 No they won’t see a dime it even says so on the web page

[@erikeggenbakstad]

One thing, they did do a lot of work adding technical information. Wonder if they have copied and pasted it from somewhere else and then edited it to fit their web site?

[@600wheel]

You could probably easily find out doing a simple text search

[@catchnkill]

What technical information? They have made nothing. The 654 horse power of the engine. Half the size half the weight etc. Everything is claim without any proof. Vaporware only.

[@nelsonsilva6842]

Dear Matthew, Always learning, always learning, did not know that site. Regarding the video subject, you do not need to go that far, we believe you! Keep up the good work as always!

[@dirtygarageguy]

It's not about belief, it's about evidence

[@nelsonsilva6842]

@@dirtygarageguy I understand, but it is also about belief when you presented the previous videos the way you did. Also you would have gained nothing from those videos. As you said you do not present wannabe ideias, when they are presented they are here, they are working and they are taking the competition head on, like the cross plane from Yamaha.

[@nelsonsilva6842]

@@dirtygarageguy on the other hand, I'm afraid that on KZbin you'll always be like Mr. James Randi. kzbin.info/www/bejne/i6ivf2p-i9dlbtE

[@archiedentone5950]

Has anyone looked at Albertos patent? It uses splash lubrication. How does that work in an outboard vertical configuration?

[@archiedentone5950]

Oh right. That’s why Alberto told Matt the patent as filed isn’t his actual engine Round and round we go

[@archiedentone5950]

Correction he has mention of an oil passage in the crank which will do fuck all for the linear slide bearing of his “genius” scotch yoke connecting rod

[@merlynsamazz1812]

Toyota have built a simpler version of this engine with variable compression

[@jediknight1294]

That graphic change is really simple, they don't have the rights to use the logos.

[@dirtygarageguy]

That's not how copyright works...

[@jediknight1294]

@@dirtygarageguy its trademark law not copyright isn't it. To display a trademark you need permission from the owner. Especially when it implies or could be used to imply a link with the trademark holder. At least that's my understanding

[@dirtygarageguy]

No. If I were to review or compare against a company I dont need permission. What is covered is making money off of a trademark, this is an inclusion, not a infringement. Freevalve or mahle can request they remove it, and that would have to be backed up by law.

[@jediknight1294]

@@dirtygarageguy fair enough. Id assumed it was an issue because that graphic appears to claim legitimacy via name dropping and be an issue Thanks.

[@archiedentone5950]

@@jediknight1294 read Alfadans pinned post about that lol

[@digger8180]

I am surprised Mahle have not put a stop to this themselves!

[@silktvPDR1]

Never buying an outboard motor again ! 😒

[@Manuqtix.Manuqtix]

I’m surprised you didn’t get any viruses on your computer when visiting that site or did you? It looks very shady!!

[@lion-e-nl]

The Dan Bilzerian boat engine :-p

[@clort123]

Has anyone ever made a four-stroke with reed valves instead of a timing chain and camshaft and all that stuff?

[@stevieaiden]

Should imagine they are not strong enough at high rpm to be useful at low rpm.

[@akkudakkupl]

How would the exhaust work then? Intake could be a reed valve, but exhaust can't. You could have an exhaust port on the liner but then you end up with a 2 stroke again.

[@gillyboyrg2]

@@akkudakkupl "intake could be a reed valve, but exhaust can't" No it couldn't...

[@gillyboyrg2]

No, anyone that knows how a 4 stroke works would know this wouldn't work. Ask yourself this, how would a reed valve act as a intake ? on the power stroke what would the reed valves be doing ? how would a reed valve be able to let exhaust gasses out whilst being able to then seal on the compression stroke ?

[@TsunauticusIV]

My dad used say... THINK about things before you say them. 😂

[@OlympusHeavyCavalry]

What albert says above is true - he and his mate are playing the game so as it does not look like a scam by definition of U.S. law. In this case, albert and his mate mimic certain well known charities by using this money to provide themselves a "fixed income" while providing minimal, repetitive, to no information at all and no working models for a "proof of concept" to be acknowledged. There are well known charities that are scams from the U.S. that do similar things, such as charge "administration fees" to keep the majority of the money and only provide minimal to very basic assistance, if at all. I can name at least 3 of these charities … WWF, The Humane Society, Salvation Army.

[@dirtygarageguy]

Smashed that nail on that head

[@miff227]

Instructions not clear. I tried to invest but the link does not appear below the video. Disappointed.

[@H-M-78]

D-Man has reloaded that crazy rust proof video, does it really work?

[@600wheel]

Damn you’re really going at these guys I love it it’s fun and thank you I fucking hate rip off artists for some unexplained reason there are a lot of very stupid people with an awful lot of money willing to throw it at obvious bullshit

[@mattrockman1028]

so at 6:50 you highlighted and moved some words around... I was like wtf whats going on and I looked on their page, the one you pulled up... After "The Problem" all their text and everything is unlocked and you do whatever. other start up's pages are locked like normal

[@archiedentone5950]

If someone is editing most free web building software anyone can do such lol

[@mattrockman1028]

@@archiedentone5950 well its pretty sloppy of them to leave that available to people that can just view their page

[@nakternal]

Wow! I hadn’t heard from this company or this engine in a while and just seeing this cracks me up. I was hopeful when I saw that driving4answers video 😂😂

[@maikgoldmann5691]

6:47 I have actually never seen a website where you can drag around text as if you were in Word. LOL

[@archiedentone5950]

You can certainly do exactly that with most web builder products

[@maikgoldmann5691]

@@archiedentone5950 Sure, that is the purpose of web editing, but I find it uncommon to work on a published site. I tried it myself, you just open it in your browser and can drag the contents along.

[@archiedentone5950]

@@maikgoldmann5691 that in itself is no doubt by design. See Alfadans hacking disclaimer lol

[@prydin]

I’m dying to know how this ended. Their website is still up, but both the CEO and the COO have taken down their LinkedIn profiles. I’d really like to know if they were just two bozos who thought they had a great idea or plain scammers.

[@brianmaurer4264]

Has anyone actually contacted Mahle on this bull??

[@dirtygarageguy]

Yes

[@dougferguson5581]

This company will ROCK the outbourd world. It will send big engines reeling for sales over seas. The first Alfadan will be at the Miami 2024 boat show

[@dirtygarageguy]

I'll come back to this comment in 2024

[@dougferguson5581]

@@dirtygarageguy I will be there to read it.lol

[@dirtygarageguy]

You've got some time to make your excuses.

[@colinfitzsimons3409]

Matt, did you not notice the expanding market growth dropping from $17B in 2025 to $13B in 2027. The outboard engine percent of which dropped from 7.3 to 5%. How then does a company whose projected market decreased significantly double in value. Their projected market share is likely to be........... I'm no economics graduate but this again shouts bullshit!

[@alfadanhighperformanceoutb8416]

Colin, I noticed that the other day. This is a project where multiple people are working together and sometimes we can all make an honest mistake. It takes an act of Congress (humor) to make even the slightest change on that campaign page but will be trying next week. It must all go through the compliance process which is not as simple as one might think. The campaign page is not a simple web site one can change at will.

[@colinfitzsimons3409]

@@alfadanhighperformanceoutb8416 you know what. I believe that you have actually convinced yourself that this design will work and you'll have a successful business. I'm sure you had the exact same belief with every other failed business venture. The issue I have with what you're doing here is that you've turned failure into a virtue and a way for you to make money. You're basically using other people's cash to fund your gamble while ensuring that you make money no matter the outcome. They'd be better going to the roulette wheel at their local casino and putting everything on red! Parting fools from their money may not be illegal but the morality of what you're doing absolutely sucks. You call everyone who points out the problems with your design and what you're doing envious or haters which goes to further prove your total lack of moral compass.

[@alfadanhighperformanceoutb8416]

Colin, Over the years I have been involved in many things but at the end, we changed the RC Jet industry, our turbine engines are still flying today and my other business has had 30 years of success with zero advertising. My luggage wrapping product was sold and used in Central and South America. In the case of Alfadan, we hired experts to take over the design and lead the way. Given that this is the first time I work with investors, I take it very seriously and must therefore do everything I can to stack the odds in our favor. What you refer to as failure, I refer to as experience that helps pave the way for a better future. Remember the old saying, "Every overnight success story comes after ten plus years of hard work".

[@dirtygarageguy]

Remember that old saying design engines... lol no they don't.

[@dirtygarageguy]

Oh one other thing, are you will to state what your bore to stroke is going to be, or even an estimate? This should have been covered in the feasibility study, which you said had been done, and you even said the the bore and stroke had been chosen. In relation to the 7.5 ltr engine, to be clear.

[@wallacengineering8096]

I believe they say that they have a completed prototype but then say they are 1/3 done because a 30-HP tiny two-cylinder is hardly a boat engine. Its a scale model designed to prove the concept and what is 1/3 complete is the large displacement inline 4 designed to actually power a boat. I understand you skepticism but you should also give them a chance. Lots of startups that people claim to be scams are actually passionate people who really try quite hard to achieve their dreams and just come up short. I believe they need some time to produce a demonstration. If they can't get it done within a couple more years, then there is potentially an issue.

[@catchnkill]

We have an ancient saying. Horse or donkey, pull it for a run. Run the model engine. Show it to public.

[@mazdamaniac4643]

The first thing that gets me is: why a boat engine? That's a niche product range right there. Like inventing a lawnmower engine that does 500mpg. WHY??? If this fantastical technology was able to do anywhere near what it claims, why would you ever need to crowd-source it? I mean come on, I drive boats for a living and nearly everything about this Alfadan idea looks like a total scam invented by people that don't know a single thing about boats. Lighter engines sound good, until you realise that a lighter engine than spec. would make the boat plane wrongly on the water and become unstable, which is inherently dangerous.

[@dirtygarageguy]

That's a very good set of points

[@mazdamaniac4643]

@@dirtygarageguy Yeah cheers Matt. I was skimming over the Alfadan site when I realised this. The spec. plate on our rescue boat grades suitable engines for that particular hull design within a min-max horsepower (kW) limit, but also a min-max weight limit for whatever engine you wish to use. Fitting one of these Alfadan engines to it would make it either ridiculously overpowered or severely under-engined, either of which is really dangerous when the situation calls for precise boat handling to rescue people out of the water. In rough sea states, I can see that it could easily flip or roll the boat with an Alfadan engine. That means that if you fitted an Alfadan engine, you would probably have to add ballast to the boat to make it handle again, which makes the weight/fuel economy savings completely pointless. If you didn't add ballast, you might even run foul of insurance issues because then your boat would technically be un-seaworthy on inspection.

[@kamenriderblade2099]

In the end, you gotta look at where every new Engine or Part design (Company/Group/Entity/Individual) is sourcing their money from. If it's coming from joe average consumer through e-begging, I'd be vary skeptical. If they manage to use other non-Public methods where they can move their project from sketch to reality to contracts/grants, that's something to be more proud of. I'm just not a fan when these types of folks use the average public folks for gathering their money.

[@brinkkuchenbrod4764]

If you wind up being wrong, I will enjoy the show!

[@paweb3530]

Maybe you should try to contact Mahle about that. In my opinion it looks like they use this brand to backup the project - well known manufacturer makes their company look more legit. I wouldn't be suprised if Mahle have no idea about this project and use of the logo on some random website.

[@archiedentone5950]

They didn’t but are aware now

[@Arachnoid_of_the_underverse]

Sounds like Dragons Den on here Matt. Oh and a video of some speed boats with the competitions engines on COOL :D

[@sirkristoferTV]

My only worry about your public service is you are also pointing out the flaws for them to change in their scammy bumf

[@dirtygarageguy]

True, but what can you do?

[@BrattyBiker]

If this was about developing a "new" "next-generation" 2 stroke engine, the fanboy in me would defend them to the bits hahaha Good one, as always Matt!

[@archiedentone5950]

That was what he pulled with his last gov grant that went nowhere.

[@RulgertGhostalker]

people do lose their marbles in such a world as this...i can only suggest the guys at Alfadan seek counseling.

[@taz4100]

Also someone has also looked this guy up and he owns 13 businesses.i wouldn't think he has much time to spend as CEO and one of the 2 employees

[@archiedentone5950]

It’s actually more than the 14 listed. There are others where he was an officer of other companies

[@600wheel]

Also it seems to be more evidence that he is pulling or ready to pull other scams also

[@Fosgen]

14:27 FUCK YEAH

[@tommorides8086]

All im wondering is this, because it isnt my money, i dont care. But imagine if it was never found out....

[@cliveclapham6451]

We scammed people last year, bung it out again minimal changes five year plan (5 year scam)

[@digger8180]

Poor "Bollocks ". 1990' s bikes sigh with relief.

[@carlosandleon]

Ooooh yeah, love these videos

[@wowgggearing]

scotch yoke engine?

[@akkudakkupl]

They did a patent to troll scotch yoke engine designs (shouldn't ever been granted, nothing new or inventive) while not publishing anything about their proposed design.

[@archiedentone5950]

@@Android-ng1wn well actually he has one which was a copy of a Bourke twin. As to who owns the engine hard to say.

[@archiedentone5950]

Yes look up his name and patents

[@peteb-s5061]

Dirty Garage....you name yourself....

[@cliveadams7629]

A bloke called Dan who likes Alfa Romeo? Nah, not a scam. I'll advised but not a scam. Unless it's a lie and not an Alfaphile called Dan...

[@alexestefanesturbo]

Salve meu amigo, Brasil aqui com você.

[@Ray88G]

I'd rather trade crypto than invest in this.. .! Lmao its almost the same. Hulighly liquid and potentially can loose all the investment.. In crypto I atleast can see market sentiment, market data and make educated guesses if need to pull out or not..

[@astrazenica7783]

Penny stock pump and dump scam

[@archiedentone5950]

Worse really this pair is scamming the jobs act SEC change

[@chuduongtv]

Hello video very good great🤗💓

[@MultiHackle]

Why dont we just wait for the engine to prove itself if its any good or not. If its a scam then the engine will fail and fade into obscurity, simple as.

[@dirtygarageguy]

OK, I'll stop doing these videos, if you stump up the $500,000... sound good?

[@MultiHackle]

@@dirtygarageguy why should i continue talking to you if youre just going to label me as an alfadan shill and anybody that criticizes your low effort videos?

[@grzybair]

The drama continues!

[@heynow3788]

Latest from alfalfa dan vvv

[@Mr549er]

$PLTR long HODL,,,, just saying

[@fcalin21]

Crush the scamers !

[@MrAli171]

Thanos lite

[@archiedentone5950]

Hmmm test

[@ZPositive]

😎🍿

[@Only_Oliver]

Hey daddy

[@sidwainhouse]

Nice promotional videos, here, take my money....

[@rob9752]

Yea, get over it dude, you're starting to sounds like that guy who claims he dumped his girlfriend first

[@jediknight1294]

Getting nervous about that investment? Analysis, critique and discussion are a healthy and vital part of discourse, especially when you are discussing potentially groundbreaking technology. This sort of discussion only helps.

[@600wheel]

I kind of agree with you it is fun but the saying thow doth protest too much is beginning to make me wonder about a yet undisclosed angle of some sort

[@archiedentone5950]

@@600wheel by whom? Are we going paranoid conspiracy theorist?

[@600wheel]

@@archiedentone5950 Sure I love it sounds like a great place to start

[@archiedentone5950]

@@600wheel who do you think has nefarious motives?

[@hdhardcore8511]

You go on like you know that it's a scam! But you don't. I think this is a real design. So what if they changed the wording. Maybe it turned out more difficult than they first thought. This is just the same as del bashing, and we all know you were a major contributer to his heart attack! What an evil toxic individual you are! I also saw the driving 4 answer creator defending himself against your attacks, and bravo to him. He handled you like a true gentleman 👏 Why don't you make your own content instead of ripping off other people's? Like really, torque is one of the units of HP, and you claim its not real? Next you'll be saying gravity isn't a force and that pressure isn't a force!

[@dirtygarageguy]

Defending himself against attacks? Lol fuck off. Was he dodging comments like neo from the matrix? What are you talking about?! I'm not even getting into forces with you, you're obviously a cabbage. Now onto the the heart attack. 🤣🤣🤣🤣🤣🤣 My fault? I think this was caused by stripping the busa back and realising it was better half stripped than what he'd done to it. He was about to say as much in the video, then realised he didn't have the heart for it.

[@archiedentone5950]

He has already scammed the government with his Bourke engine modification which he failed. www.sbir.gov/sbirsearch/detail/1522019

[@colinfitzsimons3409]

@@archiedentone5950 That was well spotted.

[@archiedentone5950]

@@Chambers36TheEnter did you look at his patents? They won’t work at all it’s nothing more than an idea

[@gingernutpreacher]

@@archiedentone5950 any company with a AOL email screams scam to me can you post this again as a separate coment as it's more likely to get eyeballs including Matt's as I think everybody should see this