when i got my REL sub years ago, there were no instructions for this. Glad to see there's a video now.
@BaZzacReАй бұрын
Hey there John, im so glad i found this Video. It makes perfect sense now! I just bought my T/7X (my very first Sub) and as i'm a music producer i just have one small Amp (Bryston 2B) and as i use Amphion One 18 Speakers, i dont listen really loud (therefore also my choice of the T7X). As i was confused on how to connect the Sub i wrote to Thomann the Music store before and the told me i should connect my Amp to the Sub and then Back to the Speakers, which is not possible with the T*X Subs so i was really confused how to do it. I thought i need to buy another Amp and connect this to the Sub but then how do i connect the out to the Sub and the AMP, Y-Split cable ?? etc etc but this Video man, the solution is so simple and easy that i would never thought of this. So thanks again you saved my day (and the money for another Amp :)
@RELAcousticsАй бұрын
Thank you for supporting REL, and we are glad that this video helped to answer your questions about connecting the High Level cable for the T/7x! As the video shows, both the High Level cable for your T/7x and your main speaker wire will be connected together to the output terminals on your system's main power amplifier.
@srkgv6 ай бұрын
Can you make a video for Rel Stereo Pair, how to connect.
@RELAcoustics6 ай бұрын
Thank you for reaching out. Here is a link to our video on connecting stereo pairs of subwoofers using their High Level inputs, though if you have any further questions about connection or tuning then feel free to write in to contactus@rel.net and our team will be happy to assist: kzbin.info/www/bejne/kJPTep94jdiFlZI
@In-Rainbows10 ай бұрын
Red should have gone to the right speaker terminal. Whoops!
@japoltube26 күн бұрын
hi, I'm going to buy upcoming Classic 99 , I want to use it with both home cinema, and stereo. I have a question. Is it possible to connect it simultaneously to both high level input comming from my stereo tube amp, and to my Marantz Cinema 60 LFE output permamently without chnging any cables on dayly basis? Or is it maybe better to go wireless on a stere side, for example from one of my Rose RS-150B streamer outputs through your transmitter (not sure which model)? Which sollution would be beneficial from audiophile point of view?
@RELAcoustics25 күн бұрын
Thank you for reaching out. The Classic 99 is designed so that you can connect to both it's High Level input and the .1/LFE input at the same time, meaning that you can connect High Level to your stereo tube amplifier and simultaneously connect using the .1/LFE input to the sub-out on your Marantz Cinema 60. Each of these input channels have their own independent Level control so that they can be tuned separately, and it will not be necessary to disconnect or reconnect any cables when switching between these two applications.
@japoltube25 күн бұрын
@@RELAcoustics thanks, that's really great news!
@neilrobins332910 ай бұрын
Nice trick
@awwbollocksthen1359Ай бұрын
I've been running both high-level and .1 LFE's on my stereo pair of T5i's, and after disconnecting the high-level connections to do some .1 LFE speaker levelling, I realised only one of the subwoofers was working! Which told me both subwoofer inputs are probably running parallel, meaning that both running the same way. Even though my arcam avr20 apparently is able to do four independent subwoofer outputs, however that's with dirac live bass management! Perhaps when finances become available the Rel 3D HT will be for the near future. Therefore in the meantime I was wondering would be beneficial for my particular 5.2.4 setup to implement a Y-Splitter ? Any advice would be appreciated! Cheers
@RELAcousticsАй бұрын
Thank you for reaching out. If you have found that one of the subwoofer outputs on you AVR is not functioning correctly, then you could use an RCA y-cable so that both of your T/5is receive signal from the same functional subwoofer output on the receiver.
@ArrogantBaSStard6 ай бұрын
Are we okay cutting the cables if we have shorter runs? The included high level cables are pretty long.
@RELAcoustics6 ай бұрын
Thank you for reaching out. Once you have finalized the location of the subwoofer in your room relative to your amplifier, you are welcome to trim the supplied High Level cable to a shorter length if you wish.
@eladdaniels5003 ай бұрын
Hey 👋 I have a pair of wharfedale elysian 2 connect to audio analogue maestro anniversary amp. Is the rel t9x or rel t7x will work good with this setup. I only hear music. not for home cinema use. 🙏 thanks
@RELAcoustics3 ай бұрын
Thank you for reaching out. When you have a chance, please write in to contactus@rel.net and our team will be happy to provide a subwoofer pairing recommendation specific to your system.
@irun2sanaxox3 ай бұрын
does this work for lower powered amps? like 25 watts or is the amp in rel sub doing the lifting ?
@RELAcoustics2 ай бұрын
Thank you for reaching out. The High Level input on our subwoofers is designed to not place any current load on the amplifier, and to not draw any amplifier power away from the system's main loudspeakers. Instead it will only be drawing a small amount of voltage to then be fed and amplified through the subwoofer's own built-in amplifier. As a result, the High Level input can certainly be connected to and used with 25 watt amplifiers.
@iluxman7 ай бұрын
I've tried all guides how to solve the humming sound from TZero Sub for my desktop hifi sytsem, but in vain! Rel seems to make thing complicated. I've duo JL Audio Subs to mate with my Maggies 3.7 speakers, also connect high level input, without no problem at all.
@RELAcoustics7 ай бұрын
Thank you for reaching out, and we are sorry to hear about the hum that you are experiencing with your Tzero. When you have a chance, please write in to contactus@rel.net and our team will be happy to assist with troubleshooting this issue and providing resolution options as needed.
@iluxman7 ай бұрын
@@RELAcoustics Thanks for your prompt reply. I just fixed simply Adding 1 RCA to the .LEF to connect with my Class D Amp (I still keep high level cable connection), and no more humm...But I'm really not sure: Now the sound of the TZero mkIII Sub coming out from the high level connection or from the .LEF. Please ... Thanks
@RELAcoustics7 ай бұрын
@@iluxman Thank you for your response, and we are glad to hear that you were able to resolve the hum from your Tzero subwoofer by running an RCA cable from it's .1/LFE input to an open RCA jack on your amplifier. In this case, the .1/LFE Level control on the subwoofer can be lowered to the minimum/lowest position, so that this RCA exclusively provides a signal ground reference without impacting the audio output of the subwoofer.
@pedrovandeweghe85828 ай бұрын
Hi, my speakers are connect to the A- terminal of my amp. There's nothing connected to the B-terminal of my amp. Can i use the B-terminal to connect the sub cables? The signal should be the same...Or is there a specific reason that the sub has to be connected to the same terminal as the speakers?
@RELAcoustics8 ай бұрын
Thank you for reaching out. We recommend connecting the High Level cable for your REL to the same "speaker A" output terminals as your main speaker wire is connected to, since this will help to ensure that the subwoofer receives the exact same signal as your main speakers are receiving and does not place any current load on your amplifier. If you have any additional questions about High Level connection in your system then feel free to write in to contactus@rel.net and our team will be happy to assist.
@hkraytai6 ай бұрын
My Arcam SA20 amp has a phono ground. Can I connect the black wire to it?
@RELAcoustics6 ай бұрын
Thank you for reaching out, and yes the phono ground screw on your Arcam SA20 is an excellent place for connecting the black High Level wire to.
@jon47158 ай бұрын
What about connecting to the Schiit Tyr? It’s a differential monoblock amplifier where both the positive and negative are hot.
@RELAcoustics8 ай бұрын
Thank you for reaching out. Here is a link to our video on connecting High Level to balanced/differential monoblock amplifiers such as your Schiit Tyr: kzbin.info/www/bejne/rHrYqIyMfp6ohZo
@jon47158 ай бұрын
@@RELAcoustics Thank you for this, however this video does not agree with your T/x series manual, which states to leave the ground floating for differential or class D monoblocks.
@RELAcoustics8 ай бұрын
@@jon4715 Thank you for your response. When connecting High Level to differential or Class D amplifiers you can start by leaving the black wire completely disconnected, though if you experience any hum from the subwoofer then we recommend connecting the black wire to a chassis screw or designated ground screw. Typically it is best to connect the black wire to a grounding point by default to prevent a ground hum from occurring from the start.
@jmlaso6 ай бұрын
Hi! If I use spades for the speakers, it's less recommended to use this way to connect my T5i to the speakers (LS50 Meta) instead of my amp?
@RELAcoustics6 ай бұрын
Thank you for reaching out. With a single subwoofer setup, we recommend connecting the High Level cable to the output terminals on the amplifier itself, rather than connecting to the binding posts on your main loudspeakers. Connecting to the amplifier's output terminals will allow you to more easily connect the cable to both the left channel and right channel outputs.
@Leo-yn5fx9 ай бұрын
i still don't understand this. Where is the speaker cables from the speakers themselves going to if you're already connecting to the binding posts? Basically if you wrap those wires(from the high level input) around the two binding posts, and you're using banana plugs for speaker cables, you still plug all 4 in? Call me dumb but isn't that a bit hazardous to share one post with 2 cables? I'm lost.
@RELAcoustics9 ай бұрын
Thank you for reaching out. When using the High Level input connection to a REL subwoofer, both the High Level wire and your main speaker wire will be connected to the exact same speaker output terminal on the amplifier. As long as you are careful and cleanly connect the High Level wire to your amplifier's output binding post, then this connection can be safely made without placing any current load on the amplifier or drawing any amplifier power away from your main loudspeakers.
@Leo-yn5fx9 ай бұрын
@@RELAcousticsCareful as in wrapping the high level wire like you showed in the vid? So i'm guessing if you're mostly looking for a musical sub the the tX series is the best option?
@LYNXHQ7 ай бұрын
Thanks for asking. I need this confirmation also.
@paulk95346 ай бұрын
Why is it that the cable is not supplied with the HT range? What do you supply with the Ht range speakers?
@RELAcoustics6 ай бұрын
Our Serie HT subwoofers do not feature the High Level input, in part because these models are intended primarily for home theater use, and by eliminating the High Level input we were able to use larger drivers and more powerful amplifiers while maintaining a competitive retail price.
@paulk95346 ай бұрын
Many thanks for taking time to answer; please tell me which cables I need to purchase, I will use the subwoofer both for HT and for two channel listening
@RELAcoustics6 ай бұрын
@@paulk9534 With the Serie HT subwoofer models, you will only need a standard RCA cable to connect it to your preamp or AV receiver. If your preamp/receiver has a single subwoofer output jack, then you will only need one RCA cable. If it is a 2-channel preamp and only has stereo (left and right channel) output, then a pair of RCA cables can be used.
@alexpal14957 ай бұрын
How are we gonna high pass speakers when we connect subs to high level input
@RELAcoustics7 ай бұрын
Thank you for reaching out. When connecting a REL subwoofer using it's High Level input, it will be necessary to set the corresponding main speaker channels to "large" or "full-range" within your processor or preamp, so that no crossover is applied to their signal. In our experience this will not only result in improved performance from your main loudspeakers, but will also allow you to achieve the full performance improvement that the High Level connection provides. If you would prefer to apply a crossover to the signal received by your main loudspeakers, then we recommend instead connecting the subwoofer using it's .1/LFE input to the subwoofer output jack on your processor. This will allow the subwoofer to receive all signal below the receiver's set Crossover value, and will give the receiver full control over the frequency response of the subwoofer and your system as a whole.
@ArrogantBaSStard6 ай бұрын
It looks like you connected one high level input cable to both right and left speaker posts. The red to right and yellow to left. This means the subs will cross the right and left speaker posts?
@RELAcoustics6 ай бұрын
Thank you for reaching out. When connecting a single subwoofer to a 2-channel amplifier, we do recommend connecting it to both the left channel and right channel speaker output terminals on the amplifier. This means that the red wire will be connected to the right channel positive speaker output, and the yellow wire will be connected to the left channel positive speaker output.
@albertwesker20506 ай бұрын
Ground goes to either left or right?
@mitchellburns926 ай бұрын
Connect the ground to the phono ground on your amp, it will eliminate all hum
@Peter144-zn7us2 ай бұрын
Where do you connect the other end with a black cap it didn't look like a RCA male
@RELAcoustics2 ай бұрын
Thank you for reaching out. One end of the High Level cable fans out into three bare wires, which connect to the output terminals on your amplifier, while the other end features a SpeakOn/NL4 Plug which connects to the High Level input jack on the subwoofer's rear amplifier panel.
@davidyan550210 ай бұрын
Hi REL, I would like know if I can simultaneously connect high level to a 2-channel amp, and the LFE to a separate AVR amp? So that the sub can do double duty, music and HT, but not both at the same time of course.
@RELAcoustics9 ай бұрын
Thank you for reaching out. All of our subwoofer models that feature the High Level input are designed so that they can be connected to using both the High Level input and the .1/LFE input simultaneously. This means that you can connect High Level to your 2-channel amplifier, and then connect using the .1/LFE input to the sub-out on your AV processor/receiver.
@user-gf7kj5vj3p4 ай бұрын
Bad idea. Combines signal, you want to mute the high level signal when using the sub in AVR mode. Also don't set speakers to large. Rel have it wrong.
@chrisp60447 ай бұрын
I have an S/510 coming. My amp is a Moon 700i which is a fully balanced differential dual mono. Do I need to use one hot channel only or limited to RCA?
@RELAcoustics7 ай бұрын
Thank you for reaching out. Since your Simaudio Moon 700i amplifier uses a fully-balanced/differential output stage design, the instructions outlined in the following article from our website can be used when connecting your S/510 subwoofer to this amplifier using the High Level input: rel.net/blog/2015-07-23/how-to/how-to-connect-a-rel-to-a-balanced-amp/
@chrisp60447 ай бұрын
@RELAcoustics TY. To be clear, only ground the sub on the chassis if a ground screw exists. Otherwise, use the amp RCA output into the LFE input on the Sub with the volume right down.
@brianlewis504210 ай бұрын
Neat
@jazzabana10 ай бұрын
When r u guys gonna release new rels with the phone app?😅
@RELAcoustics10 ай бұрын
At this time we do not have any plans on incorporating app control to our subwoofers, in large part because the DSP required for app remote functionality adds delay and latency to the subwoofer's performance, which leads to a less optimal blend with the system's main loudspeakers.
@user-gf7kj5vj3p4 ай бұрын
Just buy another brand that has plate amp with modern DSP features. Rel is 30 years old school design.
@kwang13319 ай бұрын
How About black cable ????
@RELAcoustics9 ай бұрын
The black wire of the REL's High Level cable is used to achieve an electrical ground reference between the subwoofer and the rest of your system's electronics. This wire can be connected to a designated ground screw in your system if one is available, or to a chassis screw on the power amplifier.
@darrenchase8864 ай бұрын
Confused, why don't you just set your speakers to small like audioholics recommend no you just marketing something your know for subwoofers but not loudspeakers that's the difference
@RELAcoustics4 ай бұрын
Thank you for reaching out. In our experience setting main loudspeakers to small significantly limits their performance potential, and can alter their sonic character in ways not intended by their designer. Aside from a small number of speakers that are designed to only be sent a bandwidth-limited signal, the vast majority of speakers are capable of receiving a full-range signal and originally designed and voiced with a full-range signal in mind. That being said, try it both ways in your system and see which sounds best to you. Musical and sonic preferences are subjective, and what is ideal for your ears and in your room may be different than what we prefer and recommend.