@@transferexpress I tested the pieces prior and realized they would need some heavy sanding to get them flush. I am currently looking at some machined pieces to insure a level press.
@anonymouscheez11417 ай бұрын
Hi! thank you for this great video! May I ask that can I apply on acrylic felt surface as well and if yes would it be velcro receptive? Thanks!
@transferexpress7 ай бұрын
It depends on the specific acrylic felt for velcro usability, but yes, UltraColor Max, direct to film transfers should apply to the fabric without issues. We printed these same transfers on Felt Pennant Flags: kzbin.info/www/bejne/pZyomnt7isecmKs
@graphicalsolutions1899 Жыл бұрын
Was checking out the Hotronix heatpresses on their website. Prices are no joke! Almost 3 grand for a single station heatpress!
@transferexpress Жыл бұрын
Hotronix heat presses do range between $1,300 - $8,150 for small business to commercial use. All Hotronix machines are built in the USA, with industry-leading warranties and support. With the optional patented quick change platens and features exclusive to Hotronix presses, you can be confident you're getting the best the industry has to offer. With some simple calculations you'll find printing custom apparel can help you pay off your Heat Press investment rather quickly, like we chat about here: kzbin.info/www/bejne/mKatgmSOjppre6s
@saltandjoycollection69999 ай бұрын
It is a steep price, but well worth it! I was hesitant too, but it has been a great investment.
@livelaughlove13555 ай бұрын
These are good quality heat press machines. I've purchased 2 so far.@@transferexpress
@oki_Mom3 ай бұрын
What temperature and how long for wood heat press
@transferexpress3 ай бұрын
We used the same application settings for our UltraColor Max DTF Transfers: 290 degrees, 15 seconds, hot peel with a medium to light pressure.
@mandatarr3234 Жыл бұрын
Howdy! What kind brand of Poly top-coat would you suggest for going over the top of the UCM when placed on wood? I tried several different things we had on hand already: finishing mediums by liquitex (those all peeled off), and then a krylon spray matte finish... which had some sort of chemical reaction with the UCM causing it to warp and rise up from the wood, releasing the UCM and causing strange effects.
@transferexpress Жыл бұрын
Hey Manda! I used the water-based Minwax Polycrylic for the one trophy shown here. If not left 24-28 hours after printing before applying, any liquid to the surface will release the Direct To Film print from the wood- forming some bubbles (typically near the center of the print). I did very light, thin coats for a total of 2-3 layers which turned out fantastic.
@mandatarr3234 Жыл бұрын
@@transferexpress Thanks so much for the quick reply! I'll grab some of that product and give this another go. Much appreciated! :)
@transferexpress Жыл бұрын
Always happy to help! Let us know how it turns out!
@jimschwarzbach4843 Жыл бұрын
Works on wood - what about ceramic tile?
@transferexpress Жыл бұрын
That's a great question Jim, we're going to have to test it now!
@pietpompiepompiepiet9405 ай бұрын
@@transferexpressgood day. Thanks for video. Do you know how white ink display on clear acrylic from the glue side. Is it a solid white or does the glue have an effect on it
@ThatsBrilliantWithPC Жыл бұрын
Does it fade or peel after washing? On garments.
@transferexpress Жыл бұрын
We have all of our heat transfers tested to the industry standard of 50 wash cycles. I personally (Dave) have hoodies and t-shirts that I wear all the time that are close to 2 years old printed with DTF that are showing no signs of peeling, fading or cracking.
@ThatsBrilliantWithPC Жыл бұрын
@@transferexpress Awesome! Thanks, Dave!
@transferexpress Жыл бұрын
Anytime! Always happy to help!
@elementpik5 ай бұрын
Skateboard ??
@transferexpress5 ай бұрын
Oooooh, while it's definitely possible, it may take some finesse around the curves of the underside of the board as it wouldn't lay flat on a heat press. We do have full color adhesive decals that may work easier and not require any heat! www.transferexpress.com/decals/custom-stickers
@pmg1180 Жыл бұрын
Faux leather? Not the real leather. But I’m curious about faux leather?
@transferexpress Жыл бұрын
Oooooh, we’re going to have to try it! Stay tuned!