What do worn parts look like in a gearbox? Comparing new with old, and why gears grind

  Рет қаралды 50,807

Britannica Restorations Ltd

Britannica Restorations Ltd

Күн бұрын

Пікірлер: 72
@frankmcnally996
@frankmcnally996 2 жыл бұрын
Finally a good video on new vs old synchros. Thanks
@stefanbejan2771
@stefanbejan2771 Жыл бұрын
I m watching KZbin since i was 18 and i see a lot of viedos... I learn english watching KZbin bit never leave a comment. But this time i ha e ti because this video Is si unique and help me a lot It s so Amazing how somene spend time and nolege to help the others ! Thank you soo much you are amazing i love the simplicity to expose this very hard top ! Thank you again
@BritannicaRestorations
@BritannicaRestorations Жыл бұрын
That's great!
@m.zackmccain9885
@m.zackmccain9885 2 жыл бұрын
this might be 3 years old but it's the best inspection video I have seen. I am working on my Jeep wranglers NV3550. thanks again
@BritannicaRestorations
@BritannicaRestorations 2 жыл бұрын
Glad it helped
@jimfesta8981
@jimfesta8981 Жыл бұрын
What a great video. So many of the KZbin videos on manual transmission repair fail to explain what to look for in damaged parts. Very helpful.
@BritannicaRestorations
@BritannicaRestorations Жыл бұрын
Glad it was helpful!
@insomnica6258
@insomnica6258 8 ай бұрын
Thanks for the comparison gears pictures.
@BritannicaRestorations
@BritannicaRestorations 8 ай бұрын
No problem!
@chasemcclary8861
@chasemcclary8861 3 жыл бұрын
i just opened a used transmission to check everything out and this video helped me years after it was made good job my parts look pretty good!!
@BritannicaRestorations
@BritannicaRestorations 3 жыл бұрын
Glad it helped
@sailorbob74133
@sailorbob74133 3 жыл бұрын
That's really helpful. I have a transmission that would only go into 5th gear if I was on a slight decline going at just the right speed - eventually got to the point that it now pops out of 5th gear as soon as I give any gas... Thought I only needed to replace the 5 gear baulk ring but after watching your video I suspect I should also replace the 5th gear assembly itself as well... Thanks!
@WPM_in_ATL
@WPM_in_ATL 3 жыл бұрын
Love the way you say "brand new gear" at 1:12.
@BittnerBuddenbrock
@BittnerBuddenbrock 5 жыл бұрын
your explanations are so simply good - thank you very much
@mikecunningham7621
@mikecunningham7621 2 жыл бұрын
Thanks for this excellent video! Getting into my firsts transmission rebuild and this was very helpful! Subscribed.
@BritannicaRestorations
@BritannicaRestorations 2 жыл бұрын
Thanks for the sub!
@desertbreeze1620
@desertbreeze1620 6 жыл бұрын
Brilliant explanation... I'm gonna give checking my gearbox a try now... I am a bit nervous as we don't have any local support to bail me out if I get stuck. Closest assistance is Ashcroft in the UK and the massive shipping bill associated with that!
@BritannicaRestorations
@BritannicaRestorations 6 жыл бұрын
Lot's of transmission shops should be able to build an R380 - just getting the right parts/quality is the problem!
@Anglgrinder-j3y
@Anglgrinder-j3y 4 жыл бұрын
Thank you for making this video well explained, I learned a lot to help me on a rebuild
@BritannicaRestorations
@BritannicaRestorations 4 жыл бұрын
Glad to hear it!
@mosesngungu8643
@mosesngungu8643 2 жыл бұрын
I need your help with my gear box I need your number
@richardhowarth4230
@richardhowarth4230 6 жыл бұрын
Thank you mike, you are brilliant. Cheers
@BritannicaRestorations
@BritannicaRestorations 6 жыл бұрын
No problem Mike
@defenda2477
@defenda2477 6 жыл бұрын
Thanks mate very interesting, gave me some confidence in britpart if you use it.
@BritannicaRestorations
@BritannicaRestorations 6 жыл бұрын
Britpart don't make anything, they just buy it in - the gearbox parts are OK - if you stick a G behind the part number then you will get the OEM stuff - other than that it is real cheap stuff But as with most parts suppliers, it is hit and miss Mike
@tonyn9858
@tonyn9858 3 жыл бұрын
very good video mate thank you tone uk
@BritannicaRestorations
@BritannicaRestorations 3 жыл бұрын
Glad you enjoyed it
@danielsmith5023
@danielsmith5023 3 жыл бұрын
Thank you
@BritannicaRestorations
@BritannicaRestorations 3 жыл бұрын
You're welcome!
@DasCayman
@DasCayman 11 ай бұрын
great video thank you
@BritannicaRestorations
@BritannicaRestorations 11 ай бұрын
Glad you enjoyed it
@DasCayman
@DasCayman 11 ай бұрын
@@BritannicaRestorations can you check synchronized gap wear while it’s installed in the shaft?
@BritannicaRestorations
@BritannicaRestorations 11 ай бұрын
Not really
@steveguest8028
@steveguest8028 4 жыл бұрын
This is a great video, what normally causes a gear to kick back out ? ....... Cheers 👍
@BritannicaRestorations
@BritannicaRestorations 4 жыл бұрын
Could be one of many things - worn syncros or tired springs in the detent's
@jameslewis197
@jameslewis197 3 ай бұрын
Do you think, when a 6 speed doesn't get into 2nd- but gets into all others, could it be the syncro'? It's a 95' I know it needs some work
@BritannicaRestorations
@BritannicaRestorations 3 ай бұрын
6 speed in a 95!? I am guessing it is an R380 - yes it could be the synchro, but I am seeing the forks are well-worn on the contact point and could cause the hub to tip and not engage properly - Search my recent gearbox videos -I have one somewhere in this issue
@sdeske
@sdeske Жыл бұрын
Subscribes, Well worth a follow. Awesome video work and description. Thank you for taking the time.
@BritannicaRestorations
@BritannicaRestorations Жыл бұрын
Thanks for the sub!
@filiplaskovski9993
@filiplaskovski9993 2 жыл бұрын
Great explanation mate !!!!! I learned heeps
@BritannicaRestorations
@BritannicaRestorations 2 жыл бұрын
Glad it helped
@karadpal
@karadpal Жыл бұрын
Great video!
@BritannicaRestorations
@BritannicaRestorations Жыл бұрын
Glad you enjoyed it
@karadpal
@karadpal Жыл бұрын
@@BritannicaRestorations first time restoring a VW beetle transmission, and it helps A LOT seeing pictures of what you should be looking for when evaluating used parts.
@BritannicaRestorations
@BritannicaRestorations Жыл бұрын
Great!
@giusemancuso
@giusemancuso Жыл бұрын
very helpfull video thank you .
@BritannicaRestorations
@BritannicaRestorations Жыл бұрын
You are welcome!
@colin5064
@colin5064 Жыл бұрын
Hi, found this by searching for 5 speed manual gearbox rebuild.Found this information you impart very useful and interesting. Must be down to your years of experience and acquired knowledge performing this task. Would like to ask if you were asked to rebuild a Jeep Wrangler/Cherokee AISIN AX-15 five speed manual gearbox. Would this cause you any problems due to presumed lack of practical experience on this model of manual gearbox. Would it be fair to conclude both are quite similar in function and assembly components. Jeeps from the mid 1990s are far fewer on the UK than same the generation Land Rovers. So i would imagine much harder to find competent people to restore and repair worn synchromesh assemblies etc.
@BritannicaRestorations
@BritannicaRestorations Жыл бұрын
Sorry I know nothing about Jeeps
@maneki9neko
@maneki9neko 3 жыл бұрын
very helpful
@BritannicaRestorations
@BritannicaRestorations 3 жыл бұрын
Glad to hear that
@matthiasbunzli2435
@matthiasbunzli2435 Жыл бұрын
Very helpful video! Thanks a lot and have a nice day! :-)
@BritannicaRestorations
@BritannicaRestorations Жыл бұрын
Thanks, you too!
@joemicallef5264
@joemicallef5264 4 жыл бұрын
Thanks 👍🇲🇹
@BritannicaRestorations
@BritannicaRestorations 4 жыл бұрын
No problem 👍
@flybobbie1449
@flybobbie1449 2 жыл бұрын
Hearing the train horn threw me until i realised.
@alextreharne11
@alextreharne11 3 жыл бұрын
hi I have a dicsovery 2 with an r380 gearbox and ive been thinking about overhauling it. There is a used r380 that was removed from a defender for an auto conversion apparently no major issues asking for 2500 dollars canadian.... do you think this is a good deal? since the discovery is my daily driver it would help to be able to take apart the gearbox at my own pace and swap out. thanks for your videos, they are amazing.
@BritannicaRestorations
@BritannicaRestorations 3 жыл бұрын
You did not mention which engine you had, but you may not be able to fit a defender box due to the input shaft length - need serial numbers off the boxes to confirm
@alextreharne11
@alextreharne11 3 жыл бұрын
@@BritannicaRestorationsThanks for the prompt reply. I have a 1999 discovery 2 with a td5, the engine is from a 2002 defender td5, so im guessing it would work? provided it was a fit, what do you think of the price?
@BritannicaRestorations
@BritannicaRestorations 3 жыл бұрын
IF the Defender gearbox is from a Td5 not 300Tdi then it will fit - I seem to recall the input shafts are different lengths (Not sure about V8 R380) Would need the serial numbers to check Price is quite high, but these boxes are hard to find
@alextreharne11
@alextreharne11 3 жыл бұрын
@@BritannicaRestorations yea they are quite rare. Maybe I will see if the seller is willing to budge on the price a little bit. What in particular on the serial number are you looking for? Thanks for the replies
@BritannicaRestorations
@BritannicaRestorations 3 жыл бұрын
If the Defender box has a Prefix 68 suffix L then it is a TD5 R380. If not walk away
@onwheels8232
@onwheels8232 6 жыл бұрын
Your camera il slow to syncronise. You have to change the syncro mesh to that too😏
@BritannicaRestorations
@BritannicaRestorations 6 жыл бұрын
Yeap!
@rickleaobacelarbacelar1697
@rickleaobacelarbacelar1697 6 жыл бұрын
Good morning mate . If you put legend in Portuguese you would have more than 10,000 registered only here in Brazil. Brazilians are fanatical about Defender. Ricardo Brasil .
@BritannicaRestorations
@BritannicaRestorations 6 жыл бұрын
If someone can help me with this I will! Mike
@BritannicaRestorations
@BritannicaRestorations 6 жыл бұрын
I have just been playing about on YT - see if this works please kzbin.info/www/bejne/fGrPfo2kYtN2qNk
@chimeragaming56
@chimeragaming56 4 жыл бұрын
sir you are funny. bought it by mistake you must be high at the moment xD
@chimeragaming56
@chimeragaming56 4 жыл бұрын
i gotta say tho this is one of the best i watched cause i am also looking to know what a worn gears look like transmission gears to be exact ty ty for this.
@paulhancock3844
@paulhancock3844 3 жыл бұрын
Think you will struggle to get that early lt230 output gear to fit into an R380😂
@lfn3311
@lfn3311 3 жыл бұрын
No problem. Hey you at kims? If ya are could ya see if there is a press. It would be tits if ya toolk a pic of it if there is one.
Muncie 4 Speed Transmission Repair - Fixing a poor rebuild
21:25
GearBoxVideo
Рет қаралды 134 М.
3RD GEAR GRIND FIX!  B-SERIES TRANS  HOW TO.  HSG EP. 5-19
27:45
HondaStreet Garage
Рет қаралды 250 М.
Каха и дочка
00:28
К-Media
Рет қаралды 3,4 МЛН
Sigma Kid Mistake #funny #sigma
00:17
CRAZY GREAPA
Рет қаралды 30 МЛН
Zase problém klasická závada každé VW,AUDI,ŠKODA, Ovce 2, převodovka
19:53
ARV-servis -Pohořelice
Рет қаралды 151 М.
Learn About Transmission Synchro Rings
14:39
GearBoxVideo
Рет қаралды 1,6 МЛН
why your manual transmission grinds into gear
3:58
Beau Schnapp
Рет қаралды 83 М.
How to find out if you have a good used gearbox and transfer case for a Defender
12:40
Britannica Restorations Ltd
Рет қаралды 39 М.
Manual Transmission Operation
24:04
WeberAuto
Рет қаралды 10 МЛН
Synchronization, Manual Transmission Synchronization Explained
13:06
The AbJ Garage
Рет қаралды 25 М.
Synchronizer gearbox. How it works?
24:31
Gear Transmission
Рет қаралды 9 М.
Stripping an R380 to change the mainshaft and a few surprises!
23:28
Britannica Restorations Ltd
Рет қаралды 49 М.
Synchronizer Operation Explained
8:28
DrivelineMaster
Рет қаралды 515 М.
How Manual Transmissions Work - A Simple Explanation
11:07
Engineering Explained
Рет қаралды 501 М.