What He REALLY THINKS - UMC 500 - Mark Terryberry - Pierson Workholding Q&A

Mark Terryberry from Haas shares what he really thinks of the UMC 500!
✅ What it's like to get a UMC500 👉 • DELIVERY DAY - HAAS UM...
Follow Pierson Workholding!
Website 👉 piersonworkholding.com/
KZbin 👉 / piersonworkholding
Instagram 👉 / pierson_workholding
---------------------------------------------------------
*Videos We Recommend*
Fixture Friday Series:
THIS is the playlist to watch if you want to learn about designing fixtures.
• How We Got 24 Parts on...
The Move Series:
How we moved into our new shop!
• Getting Things Ready -...
00:00 What a Haas thinks of their UMC 500
10:52 Check out our other Q&A on our channel!
#CNC #Machining #HaasUMC500

[@PiersonWorkholding]

✅ What it's like to get a UMC500 👉 kzbin.info/www/bejne/l3O4e5hsiriCa8k

[@MrFFFTTTT]

Argh, the cliffhanger!

[@timshig2226]

Hi Jay/Mark - great video series. Thanks! I have a small shop - that teaser at the end got me.... Subscribed!!! :)

[@mxcollin95]

Always learn a ton from you guys! Great video...just bummed you left me hanging. Lol 👍

[@salvadorebertolone]

a week dude, come on, were all stuck inside lol

[@emzyfilm6492]

I would listen you all day :D The nice ending I didn't expect that :D

[@Wyllie38]

Look forward to the “haas tip of the day” about different types/categories of type arbors

[@Factory400]

I was thinking the HSK introduction would have been coupled with 20k+ RPM options which is actually useful for a lot of aero applications that use tiny/long tools cutting deep inside a part. If you make block shaped parts that only need short tools and modest RPM - it does not matter. More RPM!!! I love RPM's!

[@Eggsr2bcrushed]

Every 1000 rpm past about 12-15 gets exponentially harder to obtain. Balance and tolerance needs to get much tighter.

[@Factory400]

@@Eggsr2bcrushed I would argue that is an exaggeration at these speeds with HSK. Most of the limitations we see on Haas machines are with the CAT concept where it is indeed quite difficult to go past 15k. If the effort and expense has already been paid for the HSK interface that is far better designed for high-rpm - why leave all the RPM benefits out?

[@weldmachine]

How fast do you need a spindle to turn ? BT40 tool holders are readily available up to 25k. Why the sudden need for HSK Spindles. Not having a go at you directly, just a discussion. If you run a 60 hp spindle i can understand some need for HSK. But saying that we use to run horizontals with BT/CAT spindles.

[@Sicktrickintuner]

What is a good suggested grease to use?

[@scrout]

Haha on the ending!!!

[@roguemachinellc]

Any chance there is a link to the greasing tool for the HSK?

[@1186MFG]

Spray the spindle not the holder. Open and close the unit as you spray. 😉

[@joshtryon1107]

Looks like VF2s have an HSK option right now

[@SirRootes]

Mark: ...If it was going in my garage today.... "NEXT EPISODE NEXT WEEK". Me: ... MUDAFU....!

[@frankr608]

So it doesnt matter which HSK holder you get ?is what i understood .

[@HandsonCNC]

damn.. that was a well edited clifhanger.. lol...

[@kokoeohhyeahh7099]

My point of view haas try to get in high spindle speed market.

[@dustinwalden7091]

Jay’s got them Haaz mills.

[@cncmanufacturingptyltd5189]

why not BT40 BIG Plus duel contact

[@weldmachine]

How do you guys find the the Dual Contact Tool holders ? Have you had any trouble with chips stuck under the contact surface ?

[@jameslaird8399]

LOL, Making us wait? :D

[@bcbloc02]

buying a vf-4......

[@kkknotcool]

I mean the answer is obvious. How much you got?

[@robmedina8520]

kinda wished john saunders popped in into this conversation

[@kastrup2dk]

I like to watch the video You make about the topic metal fabrication Machine Seeing a machine shop in United States and right now it's like seeing a machine shop in Europe for 20-years ago. In Europe Haas CNC Is too expensive You can get many better machines for same price Haas UMC 500 you will get more out of Doosan DVF 5000

[@weldmachine]

The other thing to consider is a Doosan is a better machine. HAAS might get there eventually. But Doosan can also become better in the mean time.

[@rgetso]

Prediction: Buy the most machine you can afford that will fit in your space and will make the parts you want to make. That may very well be a used TM2-P and/or a TL1. If you have to finance it, you will be better off saving up to pay cash for a used machine. COVID-19 Update: Wait before buying anything!! If the economic downturn continues, there will be buying opportunities in the coming months.

[@Sicktrickintuner]

I was talking with the local rep for a tm3P Definitely need to hold off and see what happens. Just been looking for used machines, but most locally are junk.

[@mjohns5944]

I just ordered a new VF2 - it was the one that was going in the Mach2020 show in the UK. Saved £15k as the show is now cancelled. Got the probing on it for half price too as Haas UK are running an offer.

[@TheTsunamijuan]

Evil ......