What I Do With Broken Dirt Bikes

[@adslammer1359]

DON'T STOP MAKING THESE VIDEOS, this is the reason why I'm subscribed to your channel, keep it up man.

[@CameronNiemela]

Thank you! Not stopping anytime soon:)

[@tomf.2274]

Hope you enjoy your ultrasonic cleaner. Simple green works wonders for most applications. There are many effective cleaners for different metals but you have to experiment to be sure you do not damage any metals. I screwed up some needles from a KX 60 carb by using a degreaser called superclean. They got pitted in a 5 minute ultrasonic bath. I like to do my carbs, and brake calipers and master cylinders once a year because I can.

[@AmericanMade007]

Awesome work man! Hard to find people that do these types of videos! In my opinion this is what i love to see! Keep it going man love your channel.

[@CameronNiemela]

Thank You! I really appreciate that.

[@casperweckhuysen2612]

I think you need to run the ultrasonic cleaner longer and higher in temp (only when you have plastic or rubber parts, you need to be careful with the temp). I run mine at 80 degrees celcius (the max temp in mine) for 30 minutes! It works great for carbs, my wr250f runs great now ;) great video btw. Have a nice day

[@tajjson]

Great video. What I find the ultrasonic cleaner particularly good for is to clean carburetors and the parts inside like the jets etc.. They can do miracles with those

[@bobbyloomis1825]

Check out the "hornady hot tub" ultra sonic cleaner. For all the nuts and bolts and other hardware, I use a Frankford 30 lbs tumbler with stainless steel media. It will make that stuff shine!

[@randyclmbs]

Cameron, I'm sure you have put this out before but I cant find it. What manufacture is your pressure washer cabinet and/or where you can buy it? Thanks for your time.

[@CameronNiemela]

It is a custom built cabinet

[@johngerberjr.3571]

I am doing a kx250f engine tear down now and now I’m scared that I’ll not be able to reuse a lot of my engine parts too. What was the final out come of this kx250f in the long run?

[@chaytonruijsenaars3971]

not my choice of music but the guy knows his stuff and he should keep it up, and that ultrasonic cleaner exceeded all my expectations, i didnt think it would do anything

[@jrb9685]

I look forward to using the ultrasonic cleaner for nuts and bolts small brackets etc, awesome idea! Thanks.

[@apexnight872]

Nice work as always Cameron looking forward to seeing the next project have a good day.

[@CameronNiemela]

Thanks!! I can't wait to get started on the next one.

[@tomcolquhoun6748]

Damn. Loved this quick series. I really like the idea of doing a part giveaway every few vids. 👌👌

[@CameronNiemela]

Thanks for watching Tom! You'll love the next project!

[@sherri32060]

You do excellent work! Love the videos, keep them coming.......

[@CameronNiemela]

Thank You!!

[@leannegray80]

Dude the presure washer is the go how is that thing set up iv never seen anything like it

[@Flappybear11]

Make the crank into a trophy!

[@TWISTEDSTRINGS69]

He does`t want to spend $20 on shipping ! LOL

[@CameronNiemela]

I just might! That would be a cool one.

[@kingmatthews5436]

RAIDER69 maybe he means a trophy for himself?

[@rookiefmxrider]

Clean a carb on the little machine, i think is going to look sick!

[@mecanicagaboardi8658]

Hi, how are you? I'm from Brazil and I'd like to know what products you used to wash the parts. Thank you

[@rogeliobuendia3562]

Hi Cameron. What liquid does the white bucket contain?

[@jesseallen8246]

I love watching ur videos I learn how a 4 stroke motor works watching ur videos👏

[@CameronNiemela]

Thank You!

[@alexmorrell9454]

How is your pressure washing cabinet made, want to build my own

[@MartynGrimes]

When cleaning Metal parts, like other materials, three major things to consider; (a) Chemistry. (b) Temperature. 3 (c) Agitation.

[@HOTSHOT-ls1bc]

On the ultrasonic cleaner if the lid is touching the part it won’t clean as well and it won’t do anything if you leave it off

[@208flatbedOO]

Would like a berrymans carb clean solovent work in that ultrasonic cleaner?

[@mayuradoolwela9717]

Hi Cameron. Hope you're feeling better. Out of curiosity, what type of camera and lens do you use for your videos?

[@CameronNiemela]

Thanks! I am using a Canon 80D with an 18-135mm lens

[@mayuradoolwela9717]

@@CameronNiemela Thanks bro. I thought as much with the autofocusing feature. Great videos bro thanks. I'm seriously thinking to invest on it. Cheers man. Have a great and a blessed day!

[@mayuradoolwela9717]

Thought i should share this with you bro. mommingschool.com/natural-cancer-killer-that-is-10000-times-stronger-than-chemotherapy/

[@randyclmbs]

Using a small plastic or metal screen with some small rubber feet will help to reduce the overall noise I have found. (keeps the part off the base of the tray from rattling...I think, not a scientist but it works pretty good here.)

[@rickfeith6372]

Is that pressure washing box the same as the sandbox? Is there 2 red boxes...or is one doing double duty?

[@gabewilliams5993]

That ultra sonic cleaner may just be perfect for hardware!

[@TWISTEDSTRINGS69]

The dirt in the cam came from the link you cleaned...Not sure if this would help you or not since you get frames so freakin clean and nice looking but a Vapor Blaster is the thing to have..It puts an unbelievable awesome surface on aluminum that`s been pitted..You know how a new CR/XR/CRF frame looks like it`s coated or painted, well it been vapor blasted at the factory and it closes the pores in the metal so it`s easily cleaned.....I used it on my XR650R frame and rims that were pitted from sitting in a damp barn for 10 years and the bike looks like new now..Wish I could send you picks of it..You could start buying bikes that are a little older and make them like new again ! Just a idea...PEACE

[@CameronNiemela]

That's very interesting, looks like a similar finish to soda blast but a better process. I'll have to check into that some more. Thanks!

[@Malin3n]

I have noticed that ultrasonic cleaner is very good for cleaning carburetor parts, you should try. :) Can i ask about your surname? It sounds very Finnish so do you have any relatives from Finland? Greetings from Finland and keep making these videos they are fun to watch! :)

[@namelessskiers3592]

Malin3n i was thinking the same :D

[@CameronNiemela]

Thank you for watching the videos! Yes, my family is from Finland indeed.

[@dalassssilu8295]

i have a used bike with i bought this summer and in a few weeks it will be winter and i want to know what kind of maintenec i need to do in the winter time so i would be ready for the next season ? do i need a engine rebuild or things like that ?

[@CameronNiemela]

Besides draining the gas or using a fuel additive, here's a video that will help you out kzbin.info/www/bejne/i6XXlHeOrtNpsM0

[@garya3056]

Nice vid- very informative, Cameron. How do you dispose of the dirty liquids in your cleaning tubs and machines? Thx.

[@CameronNiemela]

Thanks for watching! All of the waste materials go to the local transfer station.

[@garya3056]

Cameron Niemela good man.

[@benjaminburkhard7659]

Nice Video👌👌👍🏻👍🏻👍🏻👌 i have a question is a kx 85 a good bike 🏍?

[@CameronNiemela]

Thanks for watching. Yeah can't go wrong with a KX85

[@TheNOVAMUDDER]

The shop I work at we use a cap full of ultrasonic cleaner solution with water and leave the carburetors in for a hour

[@AdrianA4M]

Cameron, can you do a video on your parts pressure washer please? Setup and how you got it working. Thanks

[@CameronNiemela]

I will be doing a set of videos in the future on that.

[@stevemillerjr.6229]

Make a video about the power wasing cabinet.

[@TWISTEDSTRINGS69]

Cameron, do you have a video about personal stuff ? Like how old you are, what got you into this line of work, how long you`v been doing it, ect.....

[@CameronNiemela]

Yes, I do have a video I posted a while that gives a back story on how I got started with dirt bikes. kzbin.info/www/bejne/oWTGiKiJj9-Yh8U

[@schraubenschussel]

Do you do this for a living or is it just a hobby you do? I just wondered, because my garage is getting better and better equipped whilst I do everything on my bike on my own. ((Mostly)) I really like the pressure washer... I also wan't one now that I've seen it :D

[@CameronNiemela]

This is my main source of income. Yeah, I really love the pressure washer setup so far!

[@edsonsilva8027]

Good evening? Do you have a video of how to dismantle the shock absorber of the CRF 250x?

[@CameronNiemela]

I don't unfortunately.

[@chrislove5545]

How much psi is your pressure washer there?

[@jarrettrides9097]

What type of pressure washer do you use?

[@CameronNiemela]

It is a Ryobi 1700 PSI electric one

[@killerkork]

Hey Cameron LOOOVE your vids...your awesome !!! I have a question maybe you can help me with ? My 14 KLX 110L is lacking power, it's more noticable in 3rd & 4th gear, especially when trying to wheelie, theres just no power to keep the front wheel up. I adjusted the valves, cleaned the cab and the air filter but to no avail. I do wheelie it alot...don't know if could have hurt somthing ??...any suggestions ??

[@CameronNiemela]

Thanks for watching dude!! You may need to rejet. Make 100 percent sure the jets are cleared out, then adjust your fuel screw and rejet if necessary.

[@killerkork]

Thanks for the reply !! I have the bike jetted correctly for my aftermarket pipe and u-flow filter...why do you say I may have to rejet ? It's been a few months since I cleaned the carb, so I don't remember if I checked the jets to see if they were clogged, so I'll check that out.

[@kawasaki000000000000]

I really like your set up with pressure washer tank and solvent tank.

[@CameronNiemela]

Thanks!!

[@jakerobbins5724]

Do you run rotella even in the winter?

[@CameronNiemela]

Yes I do

[@MontclairWrestler112]

Love the video.. new crf ??

[@mgp1016]

Try a needle bottle (or the likes of one) for pin point lube application. Cheers.

[@CameronNiemela]

That's a great idea! Thanks!

[@poulo19]

Can you try and dump all those used nuts and bolts on that ultra sonic cleaner? would really love to see the end result..

[@timobijnen4434]

It works very well if you put a carburetor in it it cleans the whole inside

[@jonienglish3231]

what size tank is the ultra sonic cleaner ? 2 L ?????????

[@AbbaHakam98]

Best Chanel on youtube

[@CameronNiemela]

Thanks man!

[@agasmochfauzan7034]

Hi i'm from Indonesian 🇮🇩 I can't wait for Ultra Sonic clean Headcylinder 2T😍 @Cameron Niemela

[@CameronNiemela]

Same here!!

[@thecambiker]

Vapour / soda blasting will give better results quickly, ultrasonic cleaner for very small parts and carb internals

[@thecambiker]

Although elbow grease is just as good, keep up the good work

[@tajjson]

guy poulton soda blasting really works great. I use it a lot

[@reteid3080]

An ultrasonic cleaner is made to loosen the dirt, not remove it. Good video btw :)

[@renatofirmo6399]

A hug from Brazil, my friend.

[@CameronNiemela]

Thank You Renato!

[@renatofirmo6399]

I always watch your videos, your channel is excellent.

[@dinkygaming6884]

Year?

[@YZFMANIAC08]

I am never getting a fourstroke, way too much small parts

[@noControl556]

Ultra sonics are great for the insides of parts you can't otherwise get too

[@eganpelak4410]

Put a bucket of the Ultra sonic cleaner ; to make it less noise. Love ur vids!

[@my_name_is_chef4856]

When will that clutch basket be for sale? I need It and I can't find one any where else

[@CameronNiemela]

I'll have it up either today or tomorrow. I'll keep you posted when it's up.

[@CameronNiemela]

Sorry didn't get to you earlier. Basket is up www.revivemoto.com/products/2006-2018-kawasaki-kx250f-hinson-clutch-basket

[@owenshowek_4542]

That little ultrasonic cleaner would be great for throwing all the bolts and nuts into

[@jchalmers28jc18]

Great vid again can u pls help me and tell me how to get water out my pinkie head where the carb intake goes got water in there and can't get my pitbike to start

[@CameronNiemela]

Thanks for watching! I would guess there's water in your carb. A small amount of water in the cylinder would burn out very quickly, but pull out the spark plug and kick the engine over to blow out the water.

[@jchalmers28jc18]

Cameron Niemela thanks already tried that and tipped the bike on it gander bars but still think sum is went past the valve that's in the carb intake tried putting more petrol but still sounds like a toilet flushing lol thanks

[@longkeithdiablo8812]

Cr250 is the next bike.......?

[@corbancocanour1229]

Honda bc of the red tool box?

[@Loading321]

Cr500 next?🤞🤞

[@150ftrek]

Hey man I would look into selling some of of your old parts that you would normally toss in the trash for scrap metal. Make some money and minimize waste

[@gains7207]

how the hell does a piston just explode like that, Do you live on the rev limiter?

[@blackout394]

Get a bigger ultrasonic cleaner. Maybe the more powerfull, the better it will do. Keep it up!

[@MotoMarv-Micahboy]

As always, another good one!

[@CameronNiemela]

Thanks man!

[@florisheuperman5048]

The smal one is good for bolts

[@luuk341]

Floris Heuperman And carb jets, float bowls etc. etc. I want one for carb parts since none of my bikes have fuel injection

[@osleraidan2543]

You do awesome vids you always make my day keep up the good work

[@juanfrias1159]

Hermano la tenés muy clara con tus herramientas.

[@Ianfranklin_Katitig]

Nice ultrasonic cleaner

[@landerosbaudelio6247]

I use simple Green on my handgun and my rifle parts all of the time

[@edwardlubin322]

Surprised you didn't want an ultrasonic cleaner before now? Mr Clean

[@wisam_hatem69ii44]

Love you cameron i from iraqi 🇮🇶♥️

[@engkhian]

Using ultrasonic wth soaking chemicals for parts !!Clean n fast :)

[@fishermsso239]

Maybe you should put the smaller parts in a bags a label them with the name of the part.

[@papaal7014]

Should pressure wash before ultrasound

[@B0B_J0HN]

Hey your link it to the simple green for the ultra sonic cleaner. Do you by chance have the link to the actual ultra sonic cleaner

[@CameronNiemela]

Good catch:) Fixed it amzn.to/2gDPnSl

[@jmg6484]

Great video, as always, Thanks Cameron , you are Amazing

[@CameronNiemela]

I appreciate ya!

[@huntermartin304]

How do you keep track of which bolt goes where when putting bikes back together, confuses the heck outta me hahahaha

[@tumeh7410]

You got left hanging pretty bad... But i think he puts the bolts and parta in zip lock bags and labels them fe. Clutch parts

[@gerritburgel3048]

Be Carfule not to use a alkaline cleaner fore aluminum parts, they will collor blackish.

[@danielseibert4082]

Simple green is pink? 😁

[@kingmatthews5436]

Daniel Seibert purple

[@samnice5314]

I thought u we’re doing a rebuild on this bike

[@leroydamonte5983]

@5:24, I was hoping you'd find me outside😧😩😳

[@vijaykumar354]

Excellent work

[@wagneralves2485]

Estou aprendendo com seus vídeos

[@markusdertomatenkopf5365]

Your Videos are insane

[@CameronNiemela]

Thanks!

[@OGAstra]

Link for the ultra sonic cleaner ?

[@CameronNiemela]

It's the smallest size amzn.to/2gDPnSl

[@ivanmorales8792]

como puedo participar por una parte de moto ?

[@CameronNiemela]

Los sorteos ocurren cada pocos videos. ¡Manténganse al tanto!

[@ivanmorales8792]

como es la dinamica cuando algo se sortea ?

[@miloudsikkisse9499]

السلام عليكم أود أتعرف على مادة نتواياج من فضلك

[@Dby18chanel]

Good jobe mr. I am from to indonesia borneo island....

[@madmarc]

"what a masterpiece" lol

[@tobyjesso5552]

Weld the connecting rod back on

[@tobyjesso5552]

It will hold

[@Zyphen4866]

Jb weld it they said, it will be fun they said

[@mxrider2strokebraaap54]

Great video!:D

[@txrick4879]

The Piston perfect ash tray.

[@b_mb4948]

"What do I do with broken dirt bike bits?" *Give them to us ;)*

[@CameronNiemela]

Hahaha

[@ethancumner3599]

5th such a great achievement

[@TRX450RVlogger]

5:08 I've busted up in a skirt.... Ohhh.... The piston I see!

[@junkie842]

Man let us see the video of you busting that piston!

[@MotoBuilds]

208th?