👉 Watch this video to make sure you DON'T TIP YOUR MOWER OVER WRONG!! ➜ kzbin.info/www/bejne/m5aoh5ydqLukqKc 👉 Check out the SMOKE-SHOW in this video ➜ kzbin.info/www/bejne/pJOchZywrLOpkK8 ✅Click here for a common air filter ➜ amzn.to/3iLNFwr ✅Click here for a proper blade balancer ➜ amzn.to/2BmvxUO ✅IF YOU NEED PARTS OR TOOLS, CHECK OUT OUR AMAZON STORE ➜ www.amazon.com/shop/stevessmallenginesaloon For more videos like this, check out: 👉How to Adjust or Tune the Carburetor on a Leaf Blower ➜ kzbin.info/www/bejne/eoizhoyAnqtpga8 👉CORRECT WAY To Tune The Carburetor On A Chainsaw ➜ kzbin.info/www/bejne/g2e3Zn2lfL2Wfrs 👉How To Adjust Or Tune The Carburetor On A Weedeater ➜ kzbin.info/www/bejne/nZ7LqYesfLeneck You can connect with Steve here too: ✅Visit Steve’s WEBSITE ➜ www.stevessmallenginesaloon.com/ ✅Follow Steve on FACEBOOK ➜ facebook.com/stevessmallenginesaloon ✅Follow Steve on INSTAGRAM ➜ instagram.com/stevessmallenginesaloon/ ✅Follow Steve on TWITTER ➜ twitter.com/SteveSaloon ✅Follow Steve on TIKTOK ➜ www.tiktok.com/@stevessmallenginesaloon
@kcrowe8583 Жыл бұрын
When storing engine for extended period of time, would you recommend, engineered fuel, regular fuel with sta-bil or running carburetor completely dry?
@alanross3435 Жыл бұрын
@@kcrowe8583 run the carb dry! April asked me to fill in for Steve today! ☮✌🏻
@edpetrocelli146210 ай бұрын
Hands down Steve has the best small engine site on the web!
@StevesSmallEngineSaloon10 ай бұрын
Thank You...
@powrguy1696 Жыл бұрын
A common hydro-lock situation occurs when the carb float needle does not seat properly, and allows fuel to fill the cylinder/crankcase/etc. A common occurrence in gravity-fed fuel systems on small engines.
@jasonbrindamour903 Жыл бұрын
Happens to my riding mower all the time. I just added a fuel cutoff and a prime bulb.
@sewing1243 Жыл бұрын
If anyone's engine hydro-locks that way, in addition to correcting the issue causing the fuel leaking into the cylinder(s), the oil ought to be changed immediately because it is now most likely now a diluted oil and gasoline mix (and I think I'd squirt some motor oil in the cylinder(s) and turn the engine over a couple times before reinstalling the spark plugs so the rings and cylinder wall have some lubrication before starting the engine).
@tomcox2223 Жыл бұрын
Thanks!
@StevesSmallEngineSaloon Жыл бұрын
Thank You...
@markjames2463 Жыл бұрын
Thanks for your videos they help me when I'm in a pinch....like now. I thought my engine was hydro locked because the pull rope only comes out abut 1.5 feet. Removed the plug, the pull rope works properly, comes all the way out and cycles the engine, nothing is pushed out of the spark plug hole. Replaced the plug, pull rope only comes out 1.5 feet. Wondering if there's some sludge in the cylinder. Any thoughts? Spark plug is the proper plug for the machine.
@cesarcesar5129Ай бұрын
I’m having this same problem. Thought it was the valves. I took the head off. Cleaned and adjusted them. Put everything back together and it’s locked with the spark plug in and pulls fine with it out.
@kitzbuheler9 ай бұрын
After watching your video about tipping a lawnmower over I learned the term hydro-locked. I will now go out and attempt to report my lawnmower. Thanks so much for this information. Fantastic videos.
@StevesSmallEngineSaloon9 ай бұрын
Glad to help
@100vg Жыл бұрын
Hydro Lock can also happen if Ethanol in the fuel has absorbed water, so the water is causing it. The carb bowl, if stored too long with Ethanol gas, can absorb water and the water can prevent the engine from starting. Same with the gas tank. That water can also ruin a metal gas tank and foul up a carb bowl, jets and other internals. Not that you don't know this, but they weren't mentioned. Evapo-Rust ER012 Super Safe can repair a rusted gas tank, if the rust hasn't eaten through. Another great one, Steve and April. I'm enjoying these duo team videos.
@daveblevins3322 Жыл бұрын
I've done dumb stuff before too Steve. The only thing I can say about it, is that I was tired and in a hurry. I'm 70 now, but that's how I learned what not to do from my young twenties. 👍💥💥
@paulmcreynolds1774 Жыл бұрын
Great advice Steve.
@trcass1 Жыл бұрын
thank you. i was having trouble cranking my little 4 stroke cadet BC490. pulled the plug, cranked it over about 5 times....no oil came out. put the plug back in and it started on the second pull. thanks again for sharing this. now if i could just figure out why i'm getting so much oil coming out the filter/breather. drips pretty steady.
@georgiapatriot36173 ай бұрын
I'm glad I found this video. I have an old Snapper riding mower that I have been treating very well for a few years. One day it worked and the next day it was just locked up. The last time I used it nothing weird happened, and no funny sounds. I could not figure out what it was. Honestly I washed it with my pressure washer, but I never sprayed at the engine though. I just figured it had to do with that. Well I will be working on it tomorrow, and I will come back and leave an update. Thanks guys
@Holodomor4.0 Жыл бұрын
Love your KZbin channel! Easily one of the most informative channels for these topics out there! Cheers mates from Australia!
@StevesSmallEngineSaloon Жыл бұрын
Much appreciated!
@NovaBill6264 Жыл бұрын
Hello brother Steve my question is how can I get my Stihl chainsaw 029 model to start up Easier it takes a long time for the fuel to get to the carb
@No-Gumph Жыл бұрын
Thank you for such a clear explanation of what the cause, symptom and solution is to a hydro locked engine.
@StevesSmallEngineSaloon Жыл бұрын
You're Welcome...
@Ethan7s Жыл бұрын
I think I saw that FB group post! Another suggestion I learned is that if you got a hydro locked engine, just take out the spark plug, and use a straw to suck out the liquids, very easy fix.
@rayofhope1114 Жыл бұрын
Be careful - you can damage a hydro-locked engine if it is a twin cylinder unit. If one cylinder is hydro-locked but the other fires normally the power stroke could seriously damage the crank or con rods of the locked cylinder. That's why car engines with multi cyliners will be seriously damged by driving into deep water.
@StevesSmallEngineSaloon Жыл бұрын
Agreed!
@jayburton17432 ай бұрын
My mate has just fixed my hydro locked mk4 golf 😊
@DIYVariety Жыл бұрын
Your right steve some people give bad advice just for laugh. Takes all kinds to make the world i guess. Thanks for your expertise.
@StevesSmallEngineSaloon Жыл бұрын
Right on
@stephenbutler463 Жыл бұрын
Just commented on your other vid about tipping over, b4 i saw this. Glad i had the sence to do just that, pull the cord without the plug in
@binagarten46672 ай бұрын
Love,Love, Love, Love April!
@michaelwarren5646 Жыл бұрын
Steve and April thanks again for your very helpful videos. I went back and watched the vid on tipping over lawnmower and found it very helpful also. April love your smile and laugh. Keep up the helpful content.
@tjf1531 Жыл бұрын
Great questions April😊
@BroadwayJoe49 Жыл бұрын
Hi Steve, I have an old snapper power plug (aerator) that I had for over a century and now has seized. I can't pull the starter coil. There were a few oil ports that I hadn't noriced. Can I unseize the machine, and if so, where should I start?
@peternordahl2408 Жыл бұрын
I watch all your videos. This has to be my all time favourite. So entertaining. I was laughing all the way through. But at the same time, super informative for me. Learned something again. Thanks Steve and April
@StevesSmallEngineSaloon Жыл бұрын
Glad you enjoyed it
@gordsmith7708 Жыл бұрын
Hi April and Steve , cheers guys .
@gharv1313 Жыл бұрын
Great info SteveO! Always on top of the issues! Keep ‘em coming . Cheers 🍻 Steve and April Out!
@billl39364 ай бұрын
I have a power washer with a small Honda engine. I think it’s a 190 cc. When I filled it up with gas today, I could barely pull the engine over. Do you think my carburetor is leaking fuel into the engine? Ran fine last night.
@stephanied143 Жыл бұрын
I hydro locked my stump grinder when it threw a belt and I tilted it back . I took my spark plug out it covered my building with oil
@glentuchscherer968 Жыл бұрын
Hi Steve. You have a great way of teaching. I have a Tecumseh on my lawn mower. What is the proper level of engine oil--do I read the dipstick when it is inserted to the start of the threads or read it after screwing it all the way down and then removing it. The difference is probably 3/4 of an inch. Thanks in advance.
@Builderonone001 Жыл бұрын
Very good explanation, can you do a video of taking a stihl weed eater apart and correcting the hydro lock
@redroxx7359 Жыл бұрын
Thank you for your videos. Saved me time and a ton of money. Kudos!😊❤
@StevesSmallEngineSaloon Жыл бұрын
I'm so glad!
@kevinandersen6205 Жыл бұрын
How do you tell if you have a hydro-lock or a compression release problem, I can pull my starter cord about 10” and that’s it, if I pull REAL hard I can pull the cord to start motor but on the verge of snapping the cord. Thank you, Kevin
@gailkohler9583 Жыл бұрын
If you get an answer let me know I have a sthil blower doing as you described
@beerdrinker6452 Жыл бұрын
Informative video. Thank you.
@StevesSmallEngineSaloon Жыл бұрын
You're welcome
@kd10588 ай бұрын
I'm not sure if "hydrolock" is my problem, but I removed and replaced the valve cover on my Honda mower, to fix the "O" ring oil leak problem common on Honda. That is now fixed, but my mower will not run if the spark plug is tightened. The spark plug must be just threaded in slightly for the pull cord to work, and the engine to run. It runs and mows fine, but not with the plug even finger tightened.
@TheTronder0076 ай бұрын
Last weekend My neighbour at our Summer/weekend home asked me if I could take a look a his lawn tractor, he could not get it to run, it would try to crank but no manage to.. He told me that he had turned it on its side to sort out a rope that had ended up in the mower deck.. Having seen a few of these "how to tip your (walk behind) mower over" videos (this channel and Donyboy73 comes to mind) I reasoned that it could also happen with a lawn tractor.. I removed a very wet spark plug, and while I was waiting for my neighbour to find a 12v battery that we could hook up to the lawn tractor, I turned the engine (single cylinder Briggs & Stratton) by hand and oil came pouring out the spark plug hole.. I'm glad I did this, as it was a lot less messy than if all that oil had been forced out by the moving piston. When we got it running it did in deed smoke like CRAZY!!
@jasonlawrence6209 Жыл бұрын
Can a bad head gasket cause hydro lock with antifreeze or would the break in the gasket allow the fluids back out?
@allenklaugh Жыл бұрын
Thank you so much for the information and teaching skills. Great video sir. 👍😎🇺🇸
@StevesSmallEngineSaloon Жыл бұрын
You are very welcome
@74stevedc Жыл бұрын
I recently had that happen on a Honda gx 390 had to drain all the oil in crankcase it was filled with fuel also.
@davidkettell10735 ай бұрын
Yep i just put a clone carb on my walk behind trimmer and now have this problem . The needle does not seat properly and the cylinder fills up with fuel.
@rickb3636 Жыл бұрын
hey can i add electric start to a power washer
@dantherentalman Жыл бұрын
I believe hydro locked is a short form for hydraulically locked. Hydraulics involved fluids such as oil, gas, and water etc. So, an engine can be hydraulically locked by coming into the compression stroke with liquid above the piston.
@markschoenhals4816 Жыл бұрын
Good one brother. I’m drinking shiner.
@tadeuszmichaelwlodarczyk3120 Жыл бұрын
You two make me laugh out loud. But the info greatly appreciated ✔️👍. From Melbourne AUSTRALIA 👍🤠
@epicanela4960 Жыл бұрын
I have a echo cs 310 started smoking with 4 min idling. So i shut off. Took chain /bar off. N looks like its frozen. Cant pull string to start. Ive used it maybe 3 times. To cut some twigs. Got it fot x mas. Any tips. Do i return to echo. ???
@sandrasegrest35962 ай бұрын
Question will carbon build up cause this too
@johnbaird2395 Жыл бұрын
How does one get the links you mentioned
@georgescott6967 Жыл бұрын
In the "description" section for the video.
@liljoeii6091 Жыл бұрын
Thank you for the video 😊
@StevesSmallEngineSaloon Жыл бұрын
You're Welcome...
@raymielightner69804 ай бұрын
How do you fix a hydro liked engine that you cant turn over
@boatman222345 Жыл бұрын
Why am I guessing that it was very, very, very, shortly after that incident with his boss's wife that Steve "decided" he'd better open his own repair shop? That said I love this podcast and as an ex lawnmower/chainsaw/snowblower mechanic I can assure you that the advice you get here is always good!
@mattwaters69878 ай бұрын
Awesome video you guys. Great information! Thanks. 😊
@StevesSmallEngineSaloon8 ай бұрын
Our pleasure!
@bobwinters2885 Жыл бұрын
That was a hilarious story! Thanks for the entertaining and educational video!
@StevesSmallEngineSaloon Жыл бұрын
Our pleasure!
@OpenAirAdventureFirewood Жыл бұрын
Thanks, guys, for the info. Cheers❤ and story.
@StevesSmallEngineSaloon Жыл бұрын
Our pleasure!
@davidquinn6161 Жыл бұрын
This can also happen if the crankcase is grossly overfilled with oil. This will prevent the piston from going down. One of my neighbor's did that to his push mower. He's not a great handy man !
@Patrick4959 Жыл бұрын
a good answer to a question there Steve and April and yep Hydro-locked engine is a dead easy fix and even a good amount of WD.40 can also free it up if it.s locked up from very old 2 stroke or even 4 stroke mixtures if it,s frozen stuck in a place etc.
@fredjashar9586 Жыл бұрын
Hi Steve. I'm Fred from Australia. Came across your you tube channel and love it. So much information and ive learnt a lot. I have a 8HP Honda engine on a slasher. Impossible to turn it over and always stored in the shed. It's hydro locked, as i can't pull the cord. So is it most likely fuel leaking into the cylinder? Oil level is fine. So it has to be fuel? In which case, is is the carburettor leaking? How do i fix it? Much appreciated
@nightdipper5178 Жыл бұрын
'Somehow' I sank a 1200cc 2 stroker Waverunner while it was running. Pulled the plugs turned the motor the water hit the 12 foot ceiling above and a couple of fish were flapping on the floor. It started then ran it for an hour WOT in the bay to boil out the rest of the water. All is good.
@lawrencesanchez89044 ай бұрын
Great video!
@StevesSmallEngineSaloon4 ай бұрын
Thanks!
@chrisbonney7563 Жыл бұрын
I have a small 3hp 2-stroke outboard and laid it on its side once without turning the fuel off and filled up the cylinder with fuel. Did not have my spark plug wrench so had to go through various gyrations and string pulling to get the fuel of the cylinder. After a half hour of messing around I got it to turn over and then fire up
@richardybanez9052 Жыл бұрын
Always Like This Awesome Info. April's Small Engine Saloon..Is Awesome.😀😀😀😀😀😀Richard.
@keithsimpson1268 Жыл бұрын
Good to know steve😊😊😊😊😊😊😊😊😊
@daisyheart53857 ай бұрын
Okay thank you very much I thought my Briggs & Stratton engine it's a 14.5 horsepower was bad but I guess it's the carburetor that did it for me, I did not tip the engine I just don't think I set the pin in right and so it fired up turned on for about a second and then shut back off and then it was starting to hide or lock it wouldn't like turn over anymore, even on a fully charged brand new battery, I thought my engine was toast
@davidg9073 Жыл бұрын
It's not uncommon to hydro-lock a 2-stroke engine with water. Aussie surf lifesavers use 20hp outboard engines on inflatable rescue boats. Every time they flip, they tend to ingest water and become locked. Easy to fix once the plug's out. We had a few engines going strong which drank seawater regularly!
@johnmccormick175 Жыл бұрын
Thanks April and Steve :-)
@StevesSmallEngineSaloon Жыл бұрын
You're Welcome...
@Libertarianne Жыл бұрын
April is so pretty!
@StevesSmallEngineSaloon Жыл бұрын
I agree!
@grampy2004 Жыл бұрын
I loaned my tiller to my neighbor when he returned i just told him to put it in my shed. I didn't look at it for a few weeks so when i went to start it i saw he had parked it with the cyclinder facing down. Sure enough it was locked when i tried to start it. Simple fix though just pull the plug pull the rope be sure no one is in the way ; )
@johnlarson1891 Жыл бұрын
If you hydrolock an engine would you recommend putting a new spark plug in?
@craigwebber1311 Жыл бұрын
I've got a hydro locked stihl ms441c
@pyrog.c.c89 Жыл бұрын
Nice job Steven 🇺🇲
@StevesSmallEngineSaloon Жыл бұрын
Thank You...
@OaK-_R10 ай бұрын
Can you cause a hydrolock by using ether?
@herenow2895 Жыл бұрын
I believe that the hydro in hydro-locked is referring to water. From water getting into cylinders when a head gasket goes on a water cooled engine or being drawn into the cylinder from driving in deep water, usually resulting in bent con rods. What are the fluids that are likely to lock an engine ? Oil, fuel and water. Hydro - from the ancient Greek word meaning water.
@bottaleau7 ай бұрын
Hydrolock for hydraulic lock, which can happen in other hydraulic systems, too.
@Runefrag3 ай бұрын
2:36 Fluids DO compress, but it's usually less than 1% in normal circumstances. In things like nuclear reactors this can go up to about 5%.
@cesarcesar5129Ай бұрын
I’m having this same problem. Thought it was the valves. I took the head off. Cleaned and adjusted them. Put everything back together and it’s locked with the spark plug in and pulls fine with it out.
@thomaskapetantsis49517 ай бұрын
Hey Steve and Mrs. April, how are you. This is my question. What’s the difference between regular oil, semi-Synthetic, and full Synthetic, everyone has a different answer.
@calvinmientke3539 Жыл бұрын
After you've pulled the plug make sure that you disable the ignition wire. If your cylinder is full of gasoline you may have just created an excellent flamethrower.
@gailkohler9583 Жыл бұрын
I actually did that I pulled the cord and the ignition grounded and the spark caught my lawn mower on fire inside m garage. Fortunately I had a fire extinguisher handy.
@georgelawton9075 Жыл бұрын
Could hydro lock bend the connecting Rod?😢
@steveniksid5874 Жыл бұрын
We all STIHL know who the real "SmokeShow" is! 😍
@dreadnought2024 Жыл бұрын
How do I get one of those hoodies? When in doubt, pull the plug, spin it over and put it back in. Just don't look down the hole while spinning it!!
@markbernier8434 Жыл бұрын
Marine engines can be hydro locked by water from outside the hull backing up through the exhaust. A lot of different scenarios can happen, all of them messy and expensive.
@charlescox290 Жыл бұрын
Hydraulic, hydrostatic, both use hydro as a root. The first hydraulic fluid used was water, thus "hydro".
@tyrellbrown64 Жыл бұрын
I’m going through this now flooded by my job in water got in, I see a lot of people say take out spark plugs
@eitantal7266 ай бұрын
I get hydrolocks *often* with my small motors. It happens every time it rains hard. Yet Somehow, it self-resolves! I tug on the rope a few times and eventually it moves again
@canoetipper019 Жыл бұрын
how about coolant?
@bernardpoole9123 Жыл бұрын
I had a v 6 ford that blew a head gasket. It hydra locked on #2 cylinder and bent the rod
@haroldneely9253 Жыл бұрын
I’ve done that with an upright tiller engine looking to see if I was getting spark. Yep, it ignited and I watched the flames coming out of the cylinder just before it burned a layer of skin of my face. Nothing serious, but definitely a learning situation 😂
@georgedittle1965 Жыл бұрын
10:35
@georgedittle1965 Жыл бұрын
This needs to be addressed more seriously! I experienced a two stroke dirt bike with a full tank of fuel ignite that way as there's no ignition switch. Saved by a handy extinguisher!
@murphymmc Жыл бұрын
Technically, you can compress water or other liquids, it takes an incredible amount of pressure to attain a small, very small amount of compression. The engine will self-destruct long before that level is reached.
@kenbrown2808 Жыл бұрын
You're not wrong. I've heard of a ball valve being closed under high pressure, and squirting the mechanic in the face when he finally got enough torque on it to open it.
@markkinney5030 Жыл бұрын
I always call it oil flooded from turnning the engine on the wrong side on 4 cycle that same if it mixed with oil and gas! In fact going to back in the day going briggs update school that is how said it. Hydro - lock is the same thing and other way saiying that it has to much oil or gas and oil on top of the piston.
@joaocoelho733110 ай бұрын
I believe that the term "hydrostatic lock" is used because the lock happens because a liquid is the cause; the word hydro usually refers to water, but in this case is a liquid other than water: oil or gas, or actually could be water that penetrated somehow into the engine if the machine was stored outside.
@rolandneirynck9287 Жыл бұрын
Hydro locked means blocked by a liquid...comes from the Greec language...liquid in greec means "υγρό", prononce hygro
@Mechanicturfgear Жыл бұрын
Hydro locked for me is when I go out on the course and retrieve a machine that’s been up ended and the oil made its way to top of pistons . 3 cylinder diesel . Don’t try to start you can bend connecting rods . I usually give it a quick click and see it kick back . Take to shop and remove the glow plugs and keep face away from openings because just rolling it over by hand will send the oil 13.5 feet lol probably more ,that’s just how high my ceilings where at the last shop . Small water cooled I’d just pull plug and same roll over by hand .If anti freeze shoots out if your lucky it’s just a head gasket.😂😢😮😅
@ralfie8801 Жыл бұрын
Actually, 4 strokes can hydro lock also, especially horizontal v twin engines like used on zero turn mowers. I’ve got a toro zero turn with a 21 hp Kawasaki on it and it will fill the engine with gas over the winter if I don’t turn off the gas valve between the tanks and the carb. So much gas was in the engine it filled the crankcase until it went through the rings in the one cylinder with an open exhaust valve and then filled to muffler with gas too. It hydro locked big time, oil was so diluted there was more gas in the crankcase than oil.
@greghamilton1638 Жыл бұрын
The first thumbs up!
@larryniidji Жыл бұрын
Hydro comes from the Greek word water. As to engines I believe it refers to any liquid as you mentioned.
@StephenLoverng Жыл бұрын
What kind of beer should be used on a hydrolock?
@uuulaalaa Жыл бұрын
Just realized i hydrolocked my brand new top of the line stihl blower by running it on the gas they gave it to me for about 10mins now am out of 800 and with no energy to fight the store that sold it to me on why did it had normal unmixed fuel .
@protogen_1414 Жыл бұрын
Fluid does compress. You just need SOOO much pressure that you couldnt in practice compress water
@thomaskapetantsis49515 ай бұрын
Oh ya I have a good hydro lock story with fuel shooting out of the spark plug hole…😂
@williamwalters581 Жыл бұрын
I did that to a chainsaw one time, used the wrong oil, locked it up! Pulled the plug drained out the oil that was sitting on top top of the Pistons. I flushed it out with gasoline! It ran fine after that I've only had this saw for 37 years!
@Deadite9405 Жыл бұрын
It is possible to damage your engine when you hydro-lock it... If you're a dummy and keep trying to pull as hard as you can. Usually the rope will just snap, but I've seen the starter locking palls break. On some starters where those are on the flywheel, that can be a pretty big deal.
@Leonardokite Жыл бұрын
Good stuff, but one slight technical detail. Gases and liquids are both fluids. Gases are compressible and liquids are not.