What It Takes to Cast a Metal Part in a Casting Factory

[@kgk7987]

I respect these men for what they do.

[@footballfan7274]

They are thankful for your respect.😁

[@ustudio5424]

Should be...

[@atheed9426]

And now that everyone else knows that you specifically respect these men, we shall all finally respect them.

[@camilodj8628]

I respect too because I came for a country with similar conditions.

[@fakiirification]

This is like looking in a time capsule. Early steam and internal combustion engine parts were often cast via open pour floor moulds like this. The engine the Wright Brothers used in the first successful airplane was made this way by a small foundry. amazing how far we have come in 100 years.

[@XynRemained]

lowkey insulting that they're 100 years behind XD

[@alexa.davronov1537]

Well the technique has improved overtime but in the nutshell it's the same.

[@camazotzz]

The future is here, it's just not evenly distributed

[@philipshane768]

@@XynRemained it's exactly what they're making. Ancient ass 2 piece flywheels for early industrial age hit and miss engines.

[@ottopartz1]

The thing that has always impressed me is that it only took 61 years to go from the Kitty Hawk flyer to the first flight of the SR-71. And another 5 years after that to land on the moon. An insane jump forward in a very short time all considered.

[@andregranum7896]

Much respect and best wishes for the highly skilled craftsmen of Pakistan from Norway.

[@KyleS88]

I’d rather it cool natural then you throw dirt on it! Sketchy

[@ranasheirtaoni5372]

Thanks brother for your message

[@babaji3175]

Nambar send karo apna

[@Pakistan-Lover96]

Thanks Dear,❤️ Love from Pakistan

[@babaji3175]

@@Pakistan-Lover96 nambar do yar

[@gazof-the-north1980]

People can make jokes about the blatant absence of any health and safety but you cant deny that these guys have tremendous skill.

[@mimicbox554]

the quality of such products is extremely controversial

[@grandor8852]

Because the unskilled one are all dead.

[@chrishayes5755]

@@mimicbox554 looks fine to me

[@MegaRazorback]

@@chrishayes5755 I was about to say something similar, it looks perfectly serviceable for what it was made for...Sure it needs a lot of cleaning up but if it works the way it was intended i don't see a problem with the finished piece.

[@dave623]

I could literally learn to do his job in 20 minutes

[@samsiryani9023]

That temperature and sandals, got to give you men respect. Stay safe

[@mithunpradhani6941]

Kana

[@AtlantisPK]

They have respect n all safe, they knw wat to do n how to do so don’t worry.

[@ivantaurua6735]

No matter how many times I watch these guys prepare there moulds I know they have a skill that I could never possibly copy they are truly gifted

[@alfredolimon9785]

The way this man sits down while working is amazing, he never gets tired!!!

[@goodguyyt]

Well in indian subcontinent you will always find these hard-working peoples

[@Pakistan-Lover96]

@@goodguyyt it's Pakistan 🇵🇰

[@goodguyyt]

@@Pakistan-Lover96 what who Suffering economy?

[@travelling_stephen]

I really don't see what is amazing about something that is so natural for people in the Asian world billions of people men and women, its something they do from a very young age. It happens here in England I've seen it many times myself.

[@38Maelstorm]

Let's go down the list... 1. Digging molds barefoot. 2. Closing up the firebox bare handed (he did have mud or whatever that was on them). 3. Pouring molten steel (2300°-2700°F) in flip-flops and no safety gear. 4. Pouring slag or dirt right in with the metal. 5. If you're not paying attention, you can literally get a hot foot. Seriously, these guy show exceptional skill in their craft. Be safe fellas.

[@spikefaecumbernauld.9558]

I served my apprenticeship in a foundry for 4 years doing moulding in Scotland.. Back in the day there were foundries all over Scotland now there are none.. These guys know their trade with really basic tools..Kudos to them.. Once you have learned how to pour molten metal as they did you get to use your feel when the label is really low, almost empty.... At one point the guy pouring the metal his hand was almost touching the floor.. At that point you can rest the label on your foot...

[@Dial8Transmition]

Thet sold our jobs overseas

[@djdj500dr]

@@Dial8Transmition they who?

[@Dial8Transmition]

@@djdj500dr The men with the tiny hats

[@RandomEngineer]

Really Amazing.Doing their works without Machines.Really Appreciateable.Hidden talents of Pakistan.

[@Stop..carry-on]

I imagine this what it was like in England during the industrial revolution. Very Skilled work

[@ChristopherSmith-bh4sz]

I think we had boots.

[@MrT13]

@@ChristopherSmith-bh4sz among other things

[@Evan-hq5dt]

I was thinking this is like looking back in time.

[@handsomelarsandhisfabulousjars]

@Flo Kid Every work is not skilled, that's why they're called unskilled laborers. Generally if you didn't go to school to learn a trade or earn a degree, you are an unskilled laborer and could probably be replaced by a chimpanzee/ robot in the future

[@Ciridan]

@Flo Kid that's the dumbest shit I've ever heard. A lot of jobs require no skill at all

[@АндрейЯроменко-х7с]

"- Послушай, у вас на стройке несчастные случаи были? - Не, пока еще ни одного не было - Будут!" (С)

[@olegribak8325]

отливки наверное очень качественные, судя по тому, как кипит металл в форме))))

[@caingotlaw298]

Не должно так кипеть же да?

[@olegribak8325]

@@caingotlaw298 конечно нет, кипение насыщает отливку газами, Из-за этого будет куча пор и раковин

[@ДеняТрущ]

Я,как инженер по охране труда, смотрю все их выпуски с замиранием сердца. К ним бы работать не пошёл) но мое почтение и уважение этим мужикам!)

[@sergejtews8956]

Безумству смелых поём мы песню... Вроде так.

[@mercy8241]

Они все корочки получили и журналы ведут, не переживайте

[@shura5551]

А чего бы не пойти? Стой и фотографируй! Ведь у вас в этом нынче работа заключается?

[@JackpineGandy]

having poured steel in a foundry, I appreciate every step of what they did.

[@AuGold808]

It's so much more boss than any american foundry I've been in

[@JackpineGandy]

am going to guess, from the color of the "heat" they are pouring cast iron...steel would be a white heat, or nearly so.

[@MegaRazorback]

@@JackpineGandy cast iron is still bloody hot though, depending on the purity and other metals that might be mixed in the general melting point is between 1127-1204 degrees C!

[@grahamjordan1040]

I used to pour gun metal at cooper roller bearings kings Lynn Norfolk England

[@ecoworrier]

7:31 The starting stick 7:55 The stopping stick

[@jellybaby7]

Any factory that let's you wear your own footwear is a fun employer

[@mohammadsulaim5230]

@Dark Aster 😂😂

[@mungo7136]

@Dark Aster That's the part of a genius. Classic shoes - once you pour liquid metal in, it will be kept inside around your feet - that is so dangerous. Sandals are not prone to such a terrible danger

[@jpz5173]

What footwear?

[@jackofallglass165]

id imagine you only make the mistake of stepping in one of the molds once...

[@ljprep6250]

You misspelled "stumpwear", WR.

[@luiseduardo586]

6:37 Looks like when the Dwarves were firing up those furnaces inside the Lonely Mountain.

[@simonlunt353]

I take my hat off to all these great chaps well done men 👏👏👍

[@WowThings]

Yes they are

[@screwsnutsandbolts]

Great skills 👍

[@WowThings]

Thanks for the visit

[@screwsnutsandbolts]

@@WowThings You're very welcome !

[@ulikarnawan5601]

I cannot speak English, just say love love love for your job,,, love from Indonesia🇮🇩

[@WowThings]

Thanks for such a great devotion.

I like that everyone is wearing slippers working with melted metals, good thing they are thinking about safety.

[@hippopole9657]

Strike the iron while it is hot .They are doing their work honestly and unitedly . Really hardworking but it is good for them to follow safety measures .

[@sumitmukherjee9103]

U may not realize but safety is a luxury in these parts... safety gears used in the west maybe a persons yearly salary

[@iaincaillte3356]

This is how it was done for thousands of years, since people first learned to cast metal. Even modern factories still use this sand casting method although they usually don't dig holes in the ground. And don't be mislead. Just because that metal is liquid doesn't mean it's not heavy. 😥

[@rtruth8378]

Much respect for these hard working men

[@jaro3886]

Great respect for this gentleman.

[@agaralpha1842]

5:15 holy shit that man had got some heat resistant

[@norbertrivera]

melted metal and flip flops the best combination.

[@prasannakannan6575]

Ikr, probably his hands are numb to those temperatures

[@jackspicer455]

Its Because Hes hands are wetted with mud.

[@DoctorSkyway]

shout out to this one homie wearing them safety shoes

[@de-ja-vu]

Reminds me of the era of "wages in humans"

[@Phil-D83]

Safety sandals...😅

[@de-ja-vu]

@@Phil-D83 Dear. Everyone's memory is different.

[@gamestuff2387]

Had double look that one thought it was me just thinking it for a second

[@heavenlygreensurbanfarm8677]

They don't were shoes cause they can't aford it iv been at construction sites were workers were sandels

[@michalrimmerak1646]

Incredible and wonderful. Melt the steel in this "homemade" furnance need skills.

[@васяиванов-я3м2н]

А мы рассуждаем кто и как могли построить пирамиды в Египте... Вот так как то и строили... Точно зная свою работу...

[@МакарИванов-г2ц]

литье в землю. ничего особенного.

[@sardaukar6478]

@@МакарИванов-г2ц вообще ничего особенного

[@JRekssel]

@@sardaukar6478 мы с мужиками тут в Сибири, каж день в снег льем, всё ок

[@aleckaleck2492]

@@JRekssel Лишь бы с пивом перебоев не было.

[@aissatsartwork8578]

⬇️⬇️⬇️⬇️ kzbin.info/www/bejne/iqGXdmWqnqlrr7c

[@olivvapor4873]

In Europe you can't even work barefoot in front of your computer ... 😅

[@shrin210]

😂😂😂

[@forecaster182]

you can get an ouchie if you stub your toe into your desk... meanwhile these guys don't have gloves when sticking their hands into a lit forge

[@olivvapor4873]

@@forecaster182 very true ... desks are SO dangerous ... :-)

[@Travace]

you know someone working for OSHA is just having a conniption fit watching them pour in flip flops LOL

[@turtlelos757]

Lol, this comment made my day.

[@riiseborn]

True..as safety officer..it scare me like hell.. but i still need to watch.. because not all country bless with tight safety regulations..

[@alanaran1575]

My old boss would have a conniption fit when he seen anyone pouring without boot-guards on. He'd probably shit blood for seeing this video...

[@pkpropertysolutionsltd701]

Would be nice to know what the part is supposed to be

[@thetraitor3852]

Looks like a flywheel. But I have no idea why would you make that in two parts

[@TheYTSucks]

One that can’t be trusted.

[@aarongriffin6326]

😂😂😂😂

[@1pcfred]

@@thetraitor3852 Maybe they make it in two parts so they can put it onto line shafts? Would be easier than slipping the pulley all the way down a shaft. But why they're still using line shafts is another question.

[@Llamadosalvaje]

BEAUTIFUL ART!!

[@WowThings]

Thank you very much!

[@metalmolisher666]

Our safety inspectors would get a heart attack.

[@joseeduardobolisfortes]

This factory looks like the Saruman foundry in "Lord of Rings" movie.

[@paelante]

Same security

[@BIGREDDOG09]

wow cool. How accurate are those molds? What might the tolerance be on spec?

[@karabazoff9559]

😂

[@Drillz007]

tolerance of sand

[@yourselfdotcomlol]

Must be making chevy parts

[@Evan-hq5dt]

Nah man, these are Duralast parts.

[@IggyAndroid]

@@Evan-hq5dt get in the zone.

[@travelguy008]

@@IggyAndroid vatozone essay...

[@মোহনাভিডিও৪৯]

@@Evan-hq5dt ে

[@মোহনাভিডিও৪৯]

@@Evan-hq5dt ে

[@tkmaniac5812]

Es admirable la destreza con la que trabajan!

[@francescoesposito9765]

Genialità 💯 Rischio infortuni 💯

[@jacobgodinez4926]

Factory? That looks like an ancient ruin!

[@lee-yo6iw]

That's how factories in pakistan looks like

[@الثعلبالمكار-ل3ب]

Your grandfathers were like them ..

[@imnotadunmeryouare9010]

It’s an old factory and other places in the world still rely on human power over machinery 🤷🏻‍♀️

[@shambhuyadav7487]

@@الثعلبالمكار-ل3ب dd

[@shambhuyadav7487]

@@الثعلبالمكار-ل3ب ďhdrhhdfď

[@WOWHDVidz]

working without any safety with such high temperature atmosphere is very serious

[@stixgrim8064]

Look at those poars, they skilled af

[@griptopia]

So point that out in the video otherwise you're as bad as the people employing these people!!!!

[@shadowx2447]

Don’t worry they are my mutants brothers. We all have a special gift! Rise my mutant brothers and sisters!!! ~Magneto

[@jgjtgfhgfdghghfhf3022]

Standing 2 inches from molten metal on the ground in freaking sandals lol

[@gomerromer7708]

Living in a very poor country is serious in a whole range of ways.

[@JoseOrtiz-zx8sf]

This would explain GM quality.

[@aissatsartwork8578]

⬇️⬇️⬇️⬇️ kzbin.info/www/bejne/iqGXdmWqnqlrr7c

[@JJC991]

Wow you beat me to making the comment

[@harleydavidson4404]

Funny I thought that was Ford's

[@jkbarz841]

Very dangerous, salute to the hard working men.

[@WowThings]

Thanks for appreciations!

[@grahamjordan1040]

Been there done that

[@eduardoflores30]

Parabéns pelo trabalho, pessoal que aqui fica falando besteiras sobre os processos de produção, não são capazes de fazer metade do serviço que vocês fazem. Abraços do Brasil.

[@jorgeabelgreco2707]

O Sr sabe informar o q é aquele líquido q eles passam após a moldagem? Obrigado - Cajamar / SP - Brasil

[@joeforns]

This is how it was done in the 16 and 1700's . A very primitive shop here but they are still getting it done . Ain't no guarantees on the quality of the metal though

[@СергейЕмелин-б9ш]

Ясно одно. Тапочки это обувь литейщика.

[@Stufflr]

Я это своему бугру скажу,а если он начнёт возмущаться, то это видео покажу.

[@thetwoexplorers5505]

Are you Russian and if you are a Russian please reply me in English

[@Stufflr]

@@thetwoexplorers5505 ,We are talking about safety shoes (slippers), this is very dangerous. In Russia, when metal is melted, they work in heat-resistant clothes.

[@Сахипзадов]

Пляжные шлёпанцы.

[@HeavenKeeperVideo]

@@Stufflr and shoes)

[@biawakrawa17]

No Safety Equipment Respect for you guys love from Indonesia 🇮🇩

[@WowThings]

Thank you so much for your love.

[@behroozkhaleghirad]

I'm really considering investment into Pakistani small scale industries like casting and machining shops.

[@mubasharqadeerSAP]

They are really really skillful people, do invest. But before investment do visit here .

[@rehmatkhan624]

It's great idea but but rather than investing i would say if you are a metallurgical engineer you must consider opening training school skill development institute it would be much appreciated

[@aissatsartwork8578]

⬇️⬇️⬇️⬇️ kzbin.info/www/bejne/iqGXdmWqnqlrr7c

[@zzxd7720]

It is nice to see how everybody is wearing safety sandals.

[@ivanleterror9158]

We learned sand casting in Jr High metal shop. I can relate. Still they get the job done. Got in trouble trying to make 50 cent pieces.

[@rameezsheikh7576]

What type troubles?

[@johnnybushman651]

I worked in a steel mill and all those 30 + years I didn’t need all the ppe I wear at all . But I’m glad I had it !

[@astavri1]

The allure of the job and skills wears out after doing this everyday all day I'm sure. What I'm interested now is having an interview with one of these workers and their family, outside of work. I want to see that they are at least enjoying their life with the hard work they are doing.

[@hankrearden20]

It wouldn't matter. A job's a job. You don't turn down work because it's unappealing. Same all over the world.

[@leewithey2014]

Absolutely amazing !!!

[@ابومحمدالشعبي-ث6ذ]

استغفرالله العظيم واتوب اليه سبحان الله والحمدلله ولا اله الا الله والله اكبر اللهم صل وسلم وبارك على نبينا محمد وعلى اله وصحبه اجمعين❤

[@mechanical3766]

Thank you for showing this. May Allah protect them

[@popcicle2813]

No glove, No savety tools, No shoes. Only with slipper 😅 Real Superhuman

[@betoperez4626]

Why

[@ustudio5424]

@@betoperez4626 Because They Think Almighty Allah is with them And will protect them....

[@AbdulRahman-qu3px]

@@ustudio5424 of course Allah is with them but their owner don't give safety equipment to cut the cost it's bcz they're less privilege ppl

[@BICHIMICTUL]

Если бы я там работал, то полюбому бы рано или поздно голой ногой наступил в недавно залитую заготовку((((

[@useruseroff6605]

Так и они наступают иногда, но только не любят эти моменты снимать)

[@Kopernik777]

@@useruseroff6605 те, кто наступил, там больше не работает. Естественный отбор.

[@Олег-т3о5ж]

Тут сомнения, после недельного труда были бы вообще 👣? Пальцев уж точно не было 🤣

[@мухасаилбардинович]

Там поэтому каждый раз меняются люди ушёл на роботу и не вернулся

[@rationislumine9452]

@@мухасаилбардинович хуле , их там лярд+

[@davorb6509]

respect for these people, for these workers, for their ingenuity

[@paul8340]

What are we doing today ? Boiling metal ? these flip flops are perfect for this job

[@WowThings]

Thanks for commendation.

[@elnov973]

Тоже накосячили! Закипел чугун в форме! Что-то не сильно греют чугун, экономят топливо.

[@fainderskurs-koi8767]

лайк. Сразу видно, народ работящий, с голоду не вымрут.

[@fainderskurs-koi8767]

@@samsunga10samsung78 с какого ничего нельзя было делать? тебе конь нашептал? бабке своей расскажи. может в 50-е и нельзя, а в 70-х, уже через двор, циркулярка и фуганок. кто хотел, тот делал. да и зачем, пошел на завод, отсидел 8 часов и лавэ в кармане. спекуляция было запрещена. да, по сему и рвет на запчасти. хотя теперь вам раздолье. вот только навыков к работе у вас нет.

[@samsunga10samsung78]

@@fainderskurs-koi8767 тебе сколько лет?

[@fainderskurs-koi8767]

@@samsunga10samsung78 Уймись.

[@alfredlange1244]

@@samsunga10samsung78 Кто тебе запрещал что-то делать? Дома все шабашили, у кого были руки на месте. У меня отец автоэлектрик был, так он 8 часов отработает в АТП, домой приходит, а там уже очередь из машин стоит. И государство не бегало их не ловило. Сейчас же понабегут полиция, пожарная, налоговая, ещё даже открыться не успеешь как предприниматель, а уж за шабашниками они везде бегают и душат их. Так что не ври, лжец, не было такого, как ты говоришь.

[@chipsettt1]

@@samsunga10samsung78 не пишите чушь. мой сосед выстроил два гаража и занимался покраской и рихтовкой авто. все об этом знали и никому не было до этого дела. я занимался ремонтом электроники, несли с половины города и никаких проблем. и все это в центре крупного города.

[@dieseltech1981]

Their feet are as tough as mountain goat hooves, but if that hot liquid magma run across one of ems toes,, this would turn into a dance mix video real quick

[@27GX76R]

Leidenfrost effect. It will be harmless for a quick splash

[@ratadream3855]

😂🤣😂🤣😂

[@SIRAJKhan-nv2vi]

@@ratadream3855 ট

[@duniatrucklokal59]

kzbin.info/door/uY_L5LEHKXaMxFBS5W7b0Q

[@0801075001]

@1928mehdi sh he didn't say that they are goats, but their feet are as strong as mountain goat hooves(feet) their feet can resist such that heat, just like mountain goat run & climb rocks, it's hooves are so durable

[@jasonw2696]

Honest hard work!❤️

[@RestorationVS]

Wow good video brother 👍

[@WorldofWaqar]

Those worker guys are Amazing.My family business all depend upon these kind of guys hard work's final products. Prayers toward'em all.

[@aissatsartwork8578]

⬇️⬇️⬇️⬇️ kzbin.info/www/bejne/iqGXdmWqnqlrr7c

[@AtlantisPK]

Try to do something for their welfare too. Coz they are fantastic extraordinary human beings 🙏

[@WorldofWaqar]

@@AtlantisPK yes for sure.

[@63rus18]

А Моня пояснительную бригаду? Зачем отливать половинку колеса, если можно сделать форму для целого?)))

[@AndrejGavriluk]

А это будут колёса ?

[@МакарИванов-г2ц]

это мистические индийские технологии, не задавайте глупых вопросов

[@ScaryStoryMaybe]

это может быть маховик полумесяц

[@ВитаминВатман]

Так проще на вал надеть не разбирачивесь узел. Аналогично на скоростных поездах тормозные диски из двух половинок зажимаются на оси, при замене не нужно распрессовывать колёсную пару.

[@pheonixtechhd]

Your content is Great! Keep it up ❤❤

[@aissatsartwork8578]

⬇️⬇️⬇️⬇️ kzbin.info/www/bejne/iqGXdmWqnqlrr7c

[@Superduper666]

I fear for their safety but they are making an honorable living.

[@hendrypardede8134]

Honorable for living

[@SunilKumar-bu2cm]

Same here

[@frankoconnell6745]

You can tell my mans with the blue/green shirt and hat runs the show.

[@Oguren]

Техника безопасности на высоте )

[@ИванМостовой-ч6ь]

такой категории у них просто нет!...

[@timbrake3404]

What is the liquid they using to solidify the sand before the pattern is removed?

[@akipak4443]

used engine oil,

[@jimbarbwe1985]

I would love for there to be a voice over guiding us through the process, describing what is happening and why. Thanks for the videos and keep up the good work

[@purplehaze779]

They dont speak english lol

[@jimbarbwe1985]

@@purplehaze779 so, Google translates 100's of languages.

[@jjbotch2081]

Amazing work! I would love to know what is is.

[@JharylDonnNan]

Germany: Man there is a scratch on your 10000$ Securitysuit, you cant work today... Pakistan: You are barefoot? No problem!

[@Peteruspl]

Sandals, shoes? These are against regulation and a serious safety hazard. You need exact control of movement only bare foot can achieve. Take it off now, or get out of my shop!

[@harekrishnaharerama2207]

Quality MATTERS with STANDARDS 😁😁

[@الثعلبالمكار-ل3ب]

@@harekrishnaharerama2207 India are the same like Pakistan

[@peacefollower5026]

@@الثعلبالمكار-ل3ب most of Asia deal with same mindset 😂 but definitely German engineering (mechanical engg.) is way better then Indian or other asian engg. Also japanese are pretty good Love from india brother 🙂

[@abbycasanova1380]

Amazing! Highly skilled workers

[@Евгенийян-я9о]

Мастера одним словом. Что-то магическое в расплавленном металле😁

[@СергейМалов-к9н]

а на 6-55 только я заметил?))-"Все!..Не гони..не гони)"

[@user-ue7xc3ge4w]

@@СергейМалов-к9н Показалось. На своем говорят.

[@gurukandasamy5193]

What’s this please? For what using please? Very interesting 🤔. Reply me. Thanks 😊

[@dimap4211]

Штурвал для индийского Боинга?

[@Gaiver20007]

для Вимана!

[@avikchakravorty2023]

это не Индия ... Это в Пакистане

[@dimap4211]

@@avikchakravorty2023 вот это поворот!

[@dieselphiend]

Can anyone tell what the mechanism is they release the molten metal with? He appears to just start poking it with a long rod, and it starts flowing. I guess he could be breaking through some kind of dross or slag? How does he stop it from flowing so easily? He appears to use a larger rod when he wants it to stop. I can't imagine how this works.

[@Pridurok2001]

Мы на восьмом своем мартене Варили огненную сталь. И обогнав часы и время Внесли поправку в календарь Пускай сегодня дождь и лужи. Среди ноябрьских непогод Как будто средь январской стужи Мы встретим, хлопцы, Новый год Мой друг, простой по виду парень, он не гитарой знаменит, Он просто сталь в мартене варит, за партой вечером сидит. Он днем с огнем, а ночью с книжкой, привык он время обгонять, Он на завод пришел мальчишкой, а стал хозяином огня. А дома мать, сестренка с братом, и фотография отца, что на войне погиб солдатом от автоматного свинца. ДА, нелегко тебе порою, но ты мой друже не робей, Есть судьбы легче, я не спорю, но нет прекраснее твоей.

[@ТикоАнтараин]

Прекрасный стих

[@V.E.N]

@Грыцько Тоже так думаю

[@мухасаилбардинович]

Видел фильм индийский весна трущёбах Бомбейя

[@Pridurok2001]

@Грыцько точно! Оттуда

[@benben9794]

Everybody is talking about their shoes but no one is gonna talk about that guy at 5:20 litterally sticking his hand right next to a forge that is glowing orange... that’s hot enough to cause instant third degree burns and you’re worried about his feet.. while he’s having hurt feet suck and make it harder to work having hurt hands makes it almost impossible to work expecially in this environment

[@blauebazille8530]

Look at the safety shoes

[@Dec38105]

Here we go again always some prick on about ppe

[@bindonbindon7084]

@@Dec38105 I mean it's really more of a meme than anything.

[@MrCrashsystem]

even that piece of saw blade he uses to smooth is used in reverse just to make the game more interesting.

[@john01112]

Even though we have 3d printers now that print on the sub micron level, watching these guys work is still a work of art. It never gets old. I get more excited to see how these people work this efficiently over watching the 3d printer in our lab pump out electrodes

[@lidjoton]

what is that metal part used for ?

[@FFF-tm4uh]

Elevator

[@TestTubeGub-GubSnailman]

@@FFF-tm4uh I hope not.

[@youcefgheddari8400]

What metal are you melting in order to make the required mold and thank you

[@jay71512]

New batch of renault parts completed!

[@kossxtreeme]

Dacia parts :)

[@-SBharath]

Great respect for yhse highly skilled workers. Risking their life for their livelihood

[@НиколайШульгин-и3э]

Круто ,даже я захотел чтонибудь вылить ,только не пойму ,что они замутили ,что за запчасть .

[@crankshaft5867]

Pakistan is a hub of hardworking people.

[@WowThings]

Yes you are right.

[@boogaloo8204]

There was a stress break in the first finished peice very dangerous if it breaks in use

[@dadillen5902]

If I were you I would use it.

[@qaiserfarooq637]

Masha ALLAH ALLAH apke karobar mai barkat de or tamam mazdooro ko sehat dy Ameen

[@jorgfische]

Теперь напильником с каждой стороны по 2 см отточить и нормально. 😂

[@sanattulekov1192]

Что это вапше токое ?

[@aissatsartwork8578]

⬇️⬇️⬇️⬇️ kzbin.info/www/bejne/iqGXdmWqnqlrr7c

[@pappugovind4282]

Very hard work pls use safety 👍👌🙏

[@MrDez65]

Мне одному было интересно что отливали в формах типа кирпечей, чем это?))))

[@ШокайрокПапаев]

Я все ищу в коментах, мож кто то написал что же они все таки лепят)))

[@ИванСамофалов-х9т]

Интересно, чугунина ли?

[@6runge]

What are the metal pieces they make? What they use it for?

[@MasTech55]

کس کس کو نبی آخری زمان جناب حضرت سیدنا مصطفیٰ محمد صلی اللہ علیہ والہ و سلم کا امتی ہونے پر فخر ہے

[@WowThings]

Muslims should

[@manjitsehmbey7278]

All of you stay blessed, you are doing good work, respect from Goraya Pb India..

[@aissatsartwork8578]

⬇️⬇️⬇️⬇️ kzbin.info/www/bejne/iqGXdmWqnqlrr7c

[@huh3721]

The metal parts are for machines for a PPE factory

[@duniatrucklokal59]

kzbin.info/door/uY_L5LEHKXaMxFBS5W7b0Q

[@FaizanMulla]

😜

[@ricardoaniballosadaherrera3690]

Parece media rueda

[@Sosisi996]

Cool that’s what you called skills 👌👍🙏🏽