What makes our 5th Gen 4Runner roof rack such a good choice. 

We made sure after testing or owning almost all the different roof racks on the market. we wanted ours to fix the problems we found most of them to have. Wind noise or effect fuel mileage. I don’t care what people say or trying to convince themselves at the Roof Rack does not make white noise. It’s because they become accustomed to it. I cannot stand when noise rattles or squeaks so when designing a roofrack, I made sure that I did not have any of those and I wanted to make sure that it would hold more than the roof of the vehicle would so we did that with our design. Our low profile Roof Rack is a 1/4” lower than any other Roof Rack on the market. It is also is the tightest fitting roof rack on the market.

[@user-il1wo2vg2m]

Does the front visor rub the paint off the roof where it touches? Seems like dirt and dust would, over time, collect and scrape away at the paint.

[@sunroomstudios8487]

I saw one of these racks at a Rigs and Coffee and couldn’t believe how form fitting it was. It caught my eye before I even knew who WD was, and that is how I learned of WD. Very impressive build quality. This rack is on my wish list.

[@westcottdesigns]

Love hearing story’s like this. Thank you for sharing. We appreciate that you notice the attention to detail that we strive for. So thank you!🙏

[@bombink1968]

Beautiful...ITS GOT TO BE mine. I'm coming for it! TTYS Mr Rowe! 😉💪🏽 A KILLER representative amd he's made me happy to be part of the WD family!

[@tbirdsdign]

I can tell you care. It shows. Great work. I wish I won’t across the country from you!!!

[@westcottdesigns]

Please come visit us some time if you ever make it to town. Would love to show you around our facility. Thank you for believing in us!🙏

[@jasonostack9319]

I don’t know what all that gibberish was about the downward force and the 90, but it’s a great looking rack.

[@Bobby_86415]

Looks great, seems like a strong build quality but where I think all aftermarket roof racks fall short is the seals for mounting solutions where the OEM has a 3 proof seal from leaking. This setup is pooling all the water in the factory location not to mention your exposing the rubber seals on the nuts to the elements, until I see these issues addressed to be waterproof set and forget its a pass for now.

[@mrgroovessc]

This rack is one of the best designs I've seen and it's versatility. I agree with you though on the waterproof part of it and only putting silicone has me worried about seal. There is alway room for error and leaks. I hope future designs would address this because I really like WD stuff.

[@ktm250xcw]

Love the small details - e.g. TOPO

[@martinrenteriajr.924]

Was about to pull the trigger on y’all lo pro roof rack but now I have to wait cos that design on this one is SICK!!! I gotta have it and I hope y’all release a rack with this design.

[@westcottdesigns]

We have this rack on our website👍. Here is the link. It’s our low profile westcottdesigns.net/product/toyota-4runner-5th-gen-lo-pro-roof-rack/

[@HAVOCRISING_]

Angles and curves brother, looks stealthy and looks dam amazing!

[@westcottdesigns]

Thank you!🙏

[@RLTW_03]

Spot on brother!! I absolutely love my low profile roof rack, sliders, and ladder. I will be hitting you guys up for some body armor in a few months. Every single product that WD produces is 🔥🔥🔥🔥

[@westcottdesigns]

Thank you! We love that you have been so supportive of the Westcott life style.🙏

[@SithLordDarthBane]

Prinsu and Sherpas are very similar and offer free shipping.

[@adamradford9351]

Do you want another 2023 TRD PRO to install one on for fans and filming purposes? I'll make that drive.

[@westcottdesigns]

Would love that👍

[@rostamr4096]

As an Aerospace engineer and a 4 Runner owner, I approve this design...

[@lpdsquads1]

Great job its looks amazing!!. Did you have to change the UCA's with the 2 inch?

[@TRevelezU]

Looks so sharp. Question: Can a gap be left to accommodate the sunroof?

[@westcottdesigns]

The sunroof works fine. It will tilt and will fully open because the sunroof goes inside the roof when it opens. Some people leave off the bar to not have it over the sunroof though.

[@hypebeast_3056]

Can you get the roof rack with a design like that looks so dope

[@westcottdesigns]

We have been talking about it. As of now we’re just testing it to see how well it holds up.👍

[@DireStraights1]

Seems like I remember in a past video you mentioned something about a front bumper soon. Is a front bumper for a 5th Gen 4Runner in the works? Just asking cause I have this OCD thing about having all same manufacturer parts on my builds and I would love a front lo pro style Wescott Designs bumper to go with my sliders and roof rack.

[@westcottdesigns]

It is in the works👍

[@DireStraights1]

@@westcottdesigns Awesome!

[@eastwood111]

I like your product it seems to be of great quality. Just feel like these roof racks are way over priced tho.

[@westcottdesigns]

Definitely focus on high quality. You would be surprised on how much it cost to make the roof rack and the cost of all the stainless steel hardware that we then send out and have it black oxycodone. We just reinvested in a fully automated laser to try and help us keep up. At 1.5 million so it gets expensive fast. Thank you for reaching out and following along with our journey.

[@JohnMcMahan5]

I’m trying to decide between a Gobi mesh design and a modular. What are some pros and cons of both?

[@chewminem2044]

Hi, how do you mount RTT’s with such a tight gap between the bars and the roof of the car?

[@josecastro2630]

I got a question, I got a brand new 4runner and just got kings and upper control arms installed. But I ended up with a lean on the drivers side. Is that suppose to happen? It’s all brand new and installed by a shop.

[@sharialrawahi361]

Hi sir.. How much does it weigh of roof rack

[@mcwendel8066]

Is the sunroof operational? Also, are you worried about dissimilar metals corroding? I’m assuming the powder coating will prevent that but just curious. Wranglers have that problem with the doors and the hinges. I’m very interested in this roof rack

[@westcottdesigns]

Our Roof rack sides are aluminum and powder coated. The L brackets are still and we primer coat them and then powder coat them. The little cans that go in the roof track are aluminum and we hard anodized them black. As for the roof rack we designed it so the roof still tilts as it was designed and the roof still goes back into its space when opening. We have had great success with our roof racks being very functional and no problems other a install error once in a while. Our big focus has been making sure it’s ultra quiet and no wind noise.

[@mcwendel8066]

@@westcottdesigns awesome! Thanks for the response

[@westcottdesigns]

@@mcwendel8066 for sure! Happy to help in any way. Thank you for taking the time to look at our stuff.

[@mcwendel8066]

@@westcottdesigns no problem I have your rock rails on order. I can’t wait to receive them so I can install.

[@cameokidd]

Do you guys sell that Topo decal to put on your roof racks? 🤩

[@westcottdesigns]

We made it. We could maybe make some more. We have had people ask about them

[@treasure_hound]

@@westcottdesignsI mean, that design alone would set you guys apart from competitors such as RCI. They have a very similar look but with the topo, yours pops more. I say start making it an optional add on!

[@RomE-I-E-I-O]

Is that y’all’s spare tire hitch?

[@westcottdesigns]

It is.

[@av8ferg237]

This rack is awesome. What is the lead time if I order one? How can I get that decal you have on that also. Been reaching a lot of racks. I’ve narrowed it down to 3 and think I’m going to buy this WD low profile for my 4Runner.

[@RLTW_03]

You won't be disappointed with any products from WD!! Their customer service is top notch as well.

[@westcottdesigns]

@@RLTW_03 thank you!🙏

[@westcottdesigns]

We are currently running 3 to 4 weeks. Times will be going down in the near future as we are getting a second laser that will run 24hr a day as long as we feed it😉. Thank you for believing in our products!🙏

[@rome7570]

Can i use thule cargo box on this rack?

[@westcottdesigns]

You could. You would just need to place it behind the lights.