WHAT’S WRONG WITH MY CL600 ???? 😩 NO BOOST & LOW POWER 🤔 HOW I FIXED IT!!!!

So today, my feelings were crushed. While trying to sell my 2005 CL600….it decided to act up. it was working just fine the whole time before. I have been driving it off and on……..taking it through the car wash with no problems.  I had a nice and clean, ready for him to come by and take it off my hands. And what happens? As soon as he pulls off my street, it starts acting up and losing power and it actually cut off. I actually let him drive it by himself, confident that he was going to have an enjoyable, plush ride.  to my surprise, it comes puttering back up the street with a misfire. Barely enough power to pull into the driveway. I started sweating and stuttering. I couldn’t believe it. So this is me trying to resolve the issue. Enjoy. 

[@goldelementautoworks]

It’s still running strong. I just did an oil change and new air filters. I may just keep it……..I have another video coming out next. I installed a new set of 20” wheels.🫣🫢😛

[@ssyy6969]

That’s a nice V12 just needed some TLC.

[@lexgsj]

Try checking into the fuel system. I had a similar issue with my S65 when the fuel pump was getting weak. No codes just lack of power. Until it got weak enough to throw a low fuel pressure code. Replaced the pump and filter and I can say the car hasn't run that strong since I got it. It's a rocket now. I'll be tackling the injectors next.

[@bretthargis6802]

Remember to start simple

[@goldelementautoworks]

Indeed

[@carlosr1060]

Check plastic intermediate pipe going into the intake manifold. Check rubber hoses on vacuum lines under the entry air filter, going to the turbos.

[@goldelementautoworks]

@@carlosr1060 Thank you! It’s been driving good now. That sensor I believe was the issue. I just did an oil change and intake filter change. Big power now.

[@carlosr1060]

@@goldelementautoworks I broke the same sensor on my 2005 cl 65, while I was replacing the engine air filters.

[@goldelementautoworks]

@@carlosr1060 Yeah….it’s easy to do.

[@AndreasHannoverSL]

26:10 "i never had an issue" same moment: red instrument cluster

[@goldelementautoworks]

@@AndreasHannoverSL That’s because the scanner is hooked up and I had it in diagnostic mode. I’m going through the menu on the scanner. Read the screen for that brief second……

[@dtnvince]

Keep it if it continues to drive well the next day

[@goldelementautoworks]

I think I am!😊😊

[@SirHarlembrown]

In your opinion what scanner would say is good for w140s & c140 1997 to 99....I got a topdon....has every mercedes but my c140 v12

[@marcusadams02]

Nothing is wrong with that car. That's what it is and nothing more.