What's wrong with my TRACTOR!

  Рет қаралды 177,494

Stoney Ridge Farmer

Stoney Ridge Farmer

Күн бұрын

Пікірлер: 878
@byronpool7003
@byronpool7003 5 жыл бұрын
if you payed more than 1000 pennies for that POS you got taken to the cleaners .wait till you get into that planetary axel , gonna be at least 4000 for the parts
@timetraveler5725
@timetraveler5725 5 жыл бұрын
was wondering why Josh pinned this comment, was it because it was soo helpfull ? or what? Need MORE COFFEE
@joerowland607
@joerowland607 5 жыл бұрын
Yeah I wonder too that comment was kind of an insult. The rest of the tractor functions. And in reality at 5 grand it's a tractor if it runs and functions that's not bad.
@richardwilkens4577
@richardwilkens4577 5 жыл бұрын
Is this guy some kind of hater
@adcolt54
@adcolt54 5 жыл бұрын
Don't be a negative Nancy.
@jeremyc3431
@jeremyc3431 5 жыл бұрын
No it won't, find the right parts tractor and you will get it fixed. Don't go to a dealer unless you do want to spend big money.
@douglynch8442
@douglynch8442 5 жыл бұрын
Tractors of this era were kept simple to fix fast and get back to work. My 53 Ferguson has had it’s issues but it still runs strong today! Glad to see you working on Earl. Definitely worth fixing. Merry Christmas All!
@narlee2014
@narlee2014 5 жыл бұрын
Earl was blessed to be rescued by you! He knew he’d have a great home there with you! You don’t want to upset the Blue Ridge MTN Gods, by giving up on him! Once fixed and he’ll repay you a 1000 fold and be a great tractor forever! Get him all restored and looking too notch and not only be a great work tractor but he’d make a nice tractor for 4th of July parades and holiday parades. His restoration and popularity would bring in more viewers and more advertising for the channel!
@bootrepairman464
@bootrepairman464 4 жыл бұрын
Beautiful tractor
@001desertrat3
@001desertrat3 5 жыл бұрын
When replacing Axle Bearings always replace BOTH sides ; since one side failed due to lack of maintenance , the other side can't be far from it . If you are a half way decent welder you can weld up those chipped gears , if you can't locate replacement parts at a reasonable price .
@Kenneth65
@Kenneth65 5 жыл бұрын
You can bet the oil had never been changed in those, most people don't know that they separate from the rest of the rear end. Best to do both sides, each side should hold a quart 90wt gear oil each. Another alternative is get a complete rear end from a MF 50 with drum brakes, and replace the whole rear end/axles from the transmission on back.
@Trdbrglr75
@Trdbrglr75 5 жыл бұрын
I love these repair videos. Reminds you how much pride went into the equipment from the design engineers to the assembly line. It seems to me older designers also consulted mechanics to make it easier to repair. Not always but it seems the thought of “someone might have to fix this later on” was at least discussed during design. Keep it up Mr Stony ridge.
@benhowe5506
@benhowe5506 5 жыл бұрын
Hi Josh, that old girl is definitely worth fixing up mate, a parts tractor would be a huge benefit for the longgevity of this project. It might be very cheap for parts and worth looking into I think brother. Talk to a local old timer, respect those guys and they can fix anything. Take care Josh. Love your farm too. You should be extremely proud of yourself with the way that farm is coming along. Very nice!! 🤝🤠🇦🇺
@davidmcdaris484
@davidmcdaris484 4 жыл бұрын
Your videos bring several very wholesome things to the table. The first is knowledge. By showing your successes and failures in a real way your are giving a gift to your audience. I personally have always wanted to know how a V-rake worked and how round bales were made. Thank you. The second thing is a passionate love of life and a drive to achieve. It is an inspiration to many, and again, I thank you. I hope one day to do something very similar to you. I definitely won't be chronicling it as you do though. I spent 20 hard years as a US Navy Seabee so none of my videos would be appropriate for children.
@StoneyRidgeFarmer
@StoneyRidgeFarmer 4 жыл бұрын
thanks for the great comment!
@slarimore1
@slarimore1 5 жыл бұрын
Wow Josh...quite a project...I sure wish my grandfather was still alive. He was a AC and MF tractor mechanic for over 50 years. He'd know exactly what to do. Good luck my friend. I also love the train horn on the Kabota!
@laohantun7404
@laohantun7404 5 жыл бұрын
Woah....Josh...its a easy solution to you with tractor gear tooth chipped away...thanks for sharing with us....replace parts available ? Machine shop can make those gear and change worn bearing, you gonna have new tractor again mate....Woo......
@jcooley5175
@jcooley5175 5 жыл бұрын
Great to see you rescuing the old tractor. I grew up on a hill farm in IL and this was our primary do everything and chore tractor for 45 plus years. My dad added hydraulic controls that went in in front of the seat. You push the clutch half way down for the drive wheels and the rest of the way down for the power-takeoff. Best of luck on your repairs
@stuckinnj9554
@stuckinnj9554 5 жыл бұрын
Hey Josh, backyard mechanic Tech Tip when working on crush & run driveways. Use a piece of 1/2” plywood under your jack and jack stand. It will 1) keep your jack from bending as it is able to roll as you lift and 2) it will prevent your jack stand from sinking into the ground thus becoming unstable. 60 degrees, nice. It’s 28 up here in Northern NJ. I spent my afternoon making & welding frame supports on my manure spreader. 2 of them decided to rot away and fall into the drag chains at the same time. Fortunately, it’s only a 35 bushel spreader (small hobby horse farm).
@jasonhill6466
@jasonhill6466 5 жыл бұрын
Josh, a piece of plywood under your Jack stand will help reduce the risk of the stand collapsing on uneven ground.
@TomTom-by5sx
@TomTom-by5sx 4 жыл бұрын
Look for cracks in the housing, looked like one just above the bearing. Ebay first for parts, I've found some rare and crazy stuff on there. This is where patience pays off. Be well my friend and best to Mrs. Stoney Ridge.
@laohantun7404
@laohantun7404 5 жыл бұрын
Don't loose heart Josh....easy fix...clean it up...make pushable and park, find part slowly, take picture, measurement, inspect further, left side and axle assembly, new oil, new gaskets, new bearings, keep some budgets for engine side as well...tractor will earn back by itself....drag longer time hey very reliable tractor soon.👍👍👍👍👍
@timetraveler5725
@timetraveler5725 5 жыл бұрын
Well, while finishing my 2nd cupacoffee, i decided to add more Free advice. get ya a magnet, gather up all the metal pieces, rinse off in bucket, see what ya got, it may shine some light on whats up.I cannot lie, I Like big coffee cups.
@ChurchsFamilyFarmCFF
@ChurchsFamilyFarmCFF 5 жыл бұрын
Love the Videos really helped inspired us to start our own family farm Channel. God Bless, C.F.F.
@gregnowmen799
@gregnowmen799 5 жыл бұрын
Church's Family Farm that’s really cool. I will have to check it out.
@ChurchsFamilyFarmCFF
@ChurchsFamilyFarmCFF 5 жыл бұрын
@@gregnowmen799 Thank you
@bschmitty77
@bschmitty77 4 жыл бұрын
I feel your pain! I bought my first tractor 2 months ago for our land, a 50HP kubota L5030. I ran it for 3 days and then smoke started pouring out of the exhaust and it had a ton of crank pressure. I tore down the entire block 1 piece at a time hoping for a valve fix but ended up with 2 shattered pistons. Luckily I caught it fast enough and didnt continue to run it. There was no scoring on the sleeves and I was able to rehone, replace rings and connecting rod bearings and get it back together. 400$ in parts and 3 days in labor with cleaning and inspecting. Runs great now and has a ton more power. First engine tear down that I have ever done, and after having done it I will stick to the pre 2007 era tractors because man that was easy to work on. ALL mechanical diesel, no time chain/belt super simple once you get into it.
@tomcleghorn4005
@tomcleghorn4005 5 жыл бұрын
Simple repair. You got this. If your up for a little drive I know a guy has parts...in Ontario Canada. Can't wait for the next video
@tomcleghorn4005
@tomcleghorn4005 5 жыл бұрын
@@dj-nr8nm hey bud pm me.we can get you hooked up
@vetham100
@vetham100 5 жыл бұрын
I hope that you find the parts needed because that tractor was worth buying for the price. Keep us informed, you have my attention now. Good luck.
@Hfoutdoorsyt
@Hfoutdoorsyt 5 жыл бұрын
I think it will turn out good. You should be able to fix it!
@StoneyRidgeFarmer
@StoneyRidgeFarmer 5 жыл бұрын
I think so too!
@davidmcdaris484
@davidmcdaris484 4 жыл бұрын
Hi Josh. I'm dying for an update on Earl. My grandpa had one like that when I was a youngster and yours brings back fond memories. His farm wasn't too far from you. Our family hails from just outside of Mars Hill, North of Asheville. They row cropped tobacco.
@StoneyRidgeFarmer
@StoneyRidgeFarmer 4 жыл бұрын
oh buddy...coming soon! I have the parts in the shop now and can't wait to put it back together!
@stoffelvanheerden8107
@stoffelvanheerden8107 5 жыл бұрын
The gears are in not to bad shape, if you are not going to work it hard you can even weld them back up if you want and just replace the bearings, or even turn around the gears so they work on the other side as it looks like the got broken all on the same side.
@TennesseeVdub
@TennesseeVdub 5 жыл бұрын
You have diagnosed it correctly Josh!!! Thats what it's all about!! Love the content and yes you can do this yourself. That is a planetary gear set and you are correct on how to disassemble it. You will have to get into the rear end and pull that axel out but you are on it. THAT DOG WILL HUNT!!!! DON'T pay a mobile mechanic......YOU GOT THIS!!! Will make for great content!! WOOOOOOOOOOOOOOOOOOOOOOOOOO!!!!!!!!!!!!!!
@jerrysadler6100
@jerrysadler6100 5 жыл бұрын
No problem! Just replaced the bearings, but check both sides, the gears should be ok , not a high speed operating system, take your file smooth out any sharp edges , if there is no more things wrong you will be fine , just take your time, be sure to check the other side also!!! Run it without lubrications!!!
@danielalamo2075
@danielalamo2075 5 жыл бұрын
Go to a shop and ask questions. They can probably direct you to places that deal with used tractor parts. And maybe they'll give you some tips on repairing and things to watch out for. I love these old tractors. Good luck and I'm looking forward to more on this repair.
@lloydr.6271
@lloydr.6271 5 жыл бұрын
Look for the parts and the price, Earl has a huge reputation on this side of the pond and a little TLC will repay you . Just starting on my first restoration of a 135 and boy, do I have a lot to learn but I know she'll repay me over and over. Earl will be the same. Best wishes to you , your family and Earl for Christmas and the New Year. Never give up, never surrender.
@bitsnpieces11
@bitsnpieces11 5 жыл бұрын
One of my uncles ran a Massey Ferguson Diesel for years in his orange grove in Florida. It never failed him.
@MrWessmith1
@MrWessmith1 5 жыл бұрын
Looks like a great project, Like you I know zero this issue, but I love the way you jump in to a project and learn as we (you) go..Thanks for sharing.
@larryheckman6377
@larryheckman6377 5 жыл бұрын
With the experience I have working on my old Farmall A, most repairs can seem intimidating, but once you get into it they're fairly simple. The older tractors aren't really complex and parts are usually not too hard to find. I actually find the repairs kinda fun.
@nethanelmasters5170
@nethanelmasters5170 4 жыл бұрын
Just bought rear wheel bearing kits for my 59 MF65 at Steiner's tractor parts for $25.95 ea. Something like $11.50 shipping. Gears you can take them to a quality welder and reshape them with a die grinder. Using grind wheels and polishing discs. Low speed gears don't need to be polished mirror smooth.
@my4everhome
@my4everhome 5 жыл бұрын
Have a great weekend Josh.
@2012nowornever
@2012nowornever 5 жыл бұрын
Well did you fix it.. I looked for a follow-up video.
@tomthumb1941
@tomthumb1941 5 жыл бұрын
Josh, that tractor is a great find and deserves to STAY on the farm, all farms have an old tractor, fix it and it will b e an old friend (after you straighten the exhaust pipe ) ignore negative comments they haven't a clue., if you can't fix it now, put it under cover and repair at your convenience. adjust the carb, it's a little rich, turn the mixture screw to the right a hair.
@SchnelleKat
@SchnelleKat 5 жыл бұрын
Jesus... This guy has gotten Big since the last time i watched his Jeep video. None the less Great content.
@mikehornsby599
@mikehornsby599 5 жыл бұрын
One lonely farmer, can talk you through that he would say it’s a simple fix . Great job enjoyed that!!!!!
@BenderBendingRodriguez2024
@BenderBendingRodriguez2024 5 жыл бұрын
Hey Josh! I raise ducks in the PNW... It's ALWAYS wet. I learned a little trick about work buckets. Sir on them with the bucket right-side up, instead of upside down. You never end up sitting in a puddle and you can drop any trash straight into the bucket. It sounds odd, but it's not that uncomfortable and I hate working with wet britches!
@stedder8436
@stedder8436 5 жыл бұрын
Josh, congrats on 300k, bud!!!!!!!!!!!!!!!!!!!!
@dehavenfamilyfarm
@dehavenfamilyfarm 5 жыл бұрын
Love the repair videos. Congrats on 300k, and Merry Christmas!!!
@HillsideHighlands
@HillsideHighlands 5 жыл бұрын
Really enjoy seeing these old tractors coming back to life! We have an old ford tractor we’ll be showing more about coming up soon on our channel. Keep up the good work!
@greenstoogeslawncarellc7801
@greenstoogeslawncarellc7801 5 жыл бұрын
Love them old tractors for sure... great video
@davebruins8623
@davebruins8623 5 жыл бұрын
Love these videos..learn so much...and great tips. much appreciated.
@brennanvilcheck9469
@brennanvilcheck9469 5 жыл бұрын
I do know there is a tool (not sure if still made) called a thread file. I have one myself. It's pretty much a metal square bar with various thread sizes made on the sides, and is used as a file to clean external threads. Might be worth looking into
@bcgrittner
@bcgrittner 5 жыл бұрын
I had a feeling it was the planetary. Looks like you'll be checking the salvage yards. If you can find new parts, they will likely be major league expensive. Salvaged parts will, of course, are way cheaper. Carry on. Good luck.
@ruobe1
@ruobe1 5 жыл бұрын
love your videos
@eddielane9569
@eddielane9569 5 жыл бұрын
You will find video's on KZbin about how to fix your tractor. You will also find parts on the internet too. I looked for you and found many. You can also get repair manuals for all of your tractors as well as automobiles on the internet that will guide you in your repair needs. I bought manuals on all of my automobiles when I use to work on them.
@fredhart7904
@fredhart7904 5 жыл бұрын
Follow up on the old Ferguson, did you find some parts to repair or did I miss the video? Some people are like that, change the motor oil in their tractor or truck, but never service the transmission, power steering, coolant system, differential or brake fluid, Good luck with the tractor, I have a 1957 T035 still runs good, but I have serviced the transmission hydraulic system,
@bobbyfisher6343
@bobbyfisher6343 5 жыл бұрын
Hey Josh if you need to remove any rusty bolts try a 50/50 blend of Acetone and Automatic transmission fluid, shake before use!
@scottbennett6494
@scottbennett6494 5 жыл бұрын
works better than PB blaster
@joelp6197
@joelp6197 5 жыл бұрын
same thing went on our MF-65, got all the parts on line, can't remember the cost but it wasn't too bad.runs great now.
@edstenson7764
@edstenson7764 5 жыл бұрын
If you’re on an extreme budget, can you flip the planetary gears around and then the unbroken teeth side can mesh, then use it gently until you can get replacements? Some lawn tractor gears are reversible. Then you just need a good cleaning/greasing and a new bearing with grease. I would say fix it and learn, no rush.
@normanwray1974
@normanwray1974 5 жыл бұрын
One thing you have to remember is on a Massey Ferguson is that when the inner seal goes it will cover the brakes with oil and then no brakes. I have worked on them a lot so if you need any info let me know
@tamtam1501
@tamtam1501 5 жыл бұрын
I really enjoy your channel it looks like your mechanics have answered 😊
@HAZZASIB
@HAZZASIB 5 жыл бұрын
I wouldn't worry about the main gear in the housing. One chipped tooth won't hurt as long as you clean and de-burr it. Source some new drive gears, stick a new bearing and some new grease in it all you'll have a nice tractor! I reckon you can tackle it yourself with some patience and research. Good luck!
@fricknjeep
@fricknjeep 5 жыл бұрын
hi there first thing i might do is clean everything and get the trash out . put it back together then it should be mobil again . move it out of the way . check on parts avalbilty and price . the either fix or not . if fix you can now movie into a warm shop . winter is here . now you can work on it on a day you can't go out side . if sell it will at least roll or drive onto a trailer . no point sitting there apart . my 2 cents john
@gregbutler9873
@gregbutler9873 5 жыл бұрын
I’m restoring my 49 John Deere model m they have all kinds of parts you could possibly need prices are very reasonable too. Good luck and please use hand protection they have latex gloves you should be using.
@jasonhill6466
@jasonhill6466 5 жыл бұрын
Josh, you have a 2 pinion planetary , when I was looking for parts for my Massey I found several of those style on ebay around the 400$ range. I also found several equiptment salvage places in the southern part of the US. Be careful buying a parts tractor because between 64-67 Massey Ferguson changed to an early 3 pinion planetary design.
@johnwythe1409
@johnwythe1409 4 жыл бұрын
Take every thing apart and clean everything to get rid of fine shards. find new or good used parts if you can. Sound like others think you can clean up those gears. As long as not a lot of heavy work should be fine. Check the other side it may be going as well. Looks like a crack in the housing around 12:00, and someone has tried to weld it. I could be wrong,but look closer.
@kennethfeld6639
@kennethfeld6639 5 жыл бұрын
Scale of 1 to 10, that is about a 3 for cost, about an 8 for complex. It really isn't bad. You could probably re use all those gears and the housing damage is very minimal. That said the gear are probably pretty cheap. I would personally keep the old gears as they may be much higher quality than new replacement gears and you may decide to just re use. Getting to and replacing the inner bearing is your main problem and it isn't too bad, just time consuming. If you have the ability to have that stuff gently blasted and get rid of the rust, that will help longevity. 12:57 in the video, there appears to maybe be a crack in the housing at the top. It looks like it may have been repaired once already. I would also look into that. Again, you might be able to re use, but depending on how much "Work" you plan on using this for, that would dictate repairs/replacement.
@EVTodd
@EVTodd 5 жыл бұрын
I came to the comments to see if anybody else noticed that crack and what looks like somebody welded it before.
@Juarez94la
@Juarez94la 5 жыл бұрын
I’ve got away with a chipped ring gear and most missing teeth on the hub gears ,I’ve just cleaned it up really well with gasoline install a new bearing I greased mine very wheel and it also took oil in the hub and filled it up accordingly. We’ve put about 100 hours on the tractor pulling wagons and running a 12’ box blade no issues checked oil and still looks clean
@davidcharles3313
@davidcharles3313 5 жыл бұрын
Remove seat and pull top cover. Planetary gears may be able to be reversed? Middle section may also. Bearing and gears under seat need to be checked first. Good luck and have fun, it doesn’t need to be a new tractor. If you need parts, check Leesburg tractor salvage in northern Indiana. Tractor salvage in Iowa also. I’m sure there are others.
@jamesritter2976
@jamesritter2976 5 жыл бұрын
Really looking forward to the follow up videos on this repair job!
@markallio1670
@markallio1670 5 жыл бұрын
You can weld a new tooth on the gear, and grind and file it, My uncle did it to a transmission gear on a Farmall H over 50 years ago, and it is still running.
@tommythuntdeer
@tommythuntdeer 5 жыл бұрын
Josh, we’re all curious what you end up doing. My hope is you’ll gut it out and fix it cheap. Looks like you have plenty of great suggestions. Keep at it! Let us see what you decide.
@StoneyRidgeFarmer
@StoneyRidgeFarmer 5 жыл бұрын
You'll see...it's in the garage now waiting on parts
@brianforrest3377
@brianforrest3377 5 жыл бұрын
Great video man love watching these videos u will get it don't junk it
@michaelbienvenu4170
@michaelbienvenu4170 5 жыл бұрын
I think it looks like a Rockwell axle,I worked at a farm implement dealer and we used Rockwell axle on our equipment.we have since shut down,but that plantery drive and sun gear sure look the same.rockwels are a popular brand any heavy equipment dealer use Rockwell axles.it is not really hard to change gears,I done a few my self.you might contact the Rockwell company on your computer.hope it helps.
@Swood15
@Swood15 5 жыл бұрын
If you can’t find any gears for this . Take the old ones to a machine shop and they can machine new gears . I have machined gears for a old machine that parts were no longer available anymore and it worked just fine .
@tonyblackie3277
@tonyblackie3277 5 жыл бұрын
Really really appreciate the complete lack of swearing :)
@davidturner6509
@davidturner6509 5 жыл бұрын
Check with Worthington Ag Parts in Goldsboro NC for used parts. Also check the center section of the axle and clean out any contamination that may have transferred by the axle bearing.
@brandongustafson7497
@brandongustafson7497 4 жыл бұрын
I really think you can handle it if you ask me! Your a really smart guy! Just the trouble will probably be finding the parts needed and prices of course
@JimsNBHomestead
@JimsNBHomestead 5 жыл бұрын
Josh I love you man, but can I give you advice? Plate the bottom of your jack stands for working on gravel and soft ground like asphalt. They will slowly sink and some times tip over.
@batpherlangkharkrang7976
@batpherlangkharkrang7976 3 жыл бұрын
Hi....... Thank you 🎥👍👍👍
@TheSnakeman3
@TheSnakeman3 5 жыл бұрын
Good job for digging in to fix it. That’s half the battle in my opinion.
@allancron1936
@allancron1936 4 жыл бұрын
Those planetary gears you should be able to clean them up with a file, dose not matter greatly on an old tractor like this off the ends are chewed off so long as they are clean no rough edges, has forgotten until you started pulling it apart that these came out with planetary hubs
@allenhenry1113
@allenhenry1113 5 жыл бұрын
If i was you repair this. Replace all bearings,, the gears you could get lucky and find one on a scrap tractor. Like one guy said i would replace the bearing on the other side as well. Good luck to ya and like the clip
@altonriggs2352
@altonriggs2352 5 жыл бұрын
Noooooo...Dont shoot Earl!!! You can fix it. We want to see Earl working. Merry Christmas!!!
@pop50smoke
@pop50smoke 5 жыл бұрын
Josh, Go to Yesterday's Tractors. They have your parts along with manuals for your tractor. The planetary pinion gear is around $58 apiece. If it were me I would clean it of the bearing pieces and put it back together, load it on a trailer and haul it to the high schools FFA shops. That would give the kids experience and they would clean it up and paint it like a new one. Cost in parts is what it would cost you.
@richardperry9095
@richardperry9095 5 жыл бұрын
All of that can be repaired. The gears should be able to be found. The one chipped tooth in the housing should be ok, the fix shouldn't be that expensive, I've seen worse. I'll help locate parts.
@Mr3030man
@Mr3030man 5 жыл бұрын
He's right. The large gear shouldnt need replacement. I would replace the gears in the hub along with the bearing. The carrier gears are like $50 a piece. $100-120 fix at the most.
@ralfie8801
@ralfie8801 5 жыл бұрын
Heath FamilyFarms The axle bearing is probably somewhere around $100.00, hopefully less, but I'd expect about that. I'm guessing he's in the $250.00 neighborhood to fix it.
@johndoe-zk1yu
@johndoe-zk1yu 5 жыл бұрын
@@ralfie8801 in the worst case. could the large gear be welded and machined?
@Mr3030man
@Mr3030man 5 жыл бұрын
@@ralfie8801 I did one many years ago. I had no idea the bearing was going for that much.
@ralfie8801
@ralfie8801 5 жыл бұрын
john doe Why? It has one chipped tooth, and that’s on the end of it. Unless the ring gear is cracked, file the rough edges off that one tooth and run it. The planetary gears are the issue here. He needs some that are in better shape, or some new ones if he can find them.
@crawleyboysperformance6730
@crawleyboysperformance6730 5 жыл бұрын
I just rebuilt a planetary on a tractor exactly like that and I ordered the planetary gears from yesterday's tractor and got the part number off of the Barons and went to my local tractor dealer and ordered bearings everything cost me right around $300 to fix it it's not a hard job you can do it yourself just take your time clean everything up definitely need to replace the little planetary gears but the ring gear and The Sun Gear inside the housing will be fine
@2LateIWon
@2LateIWon 5 жыл бұрын
On the sun gear (gear in the tractor) since it was 1 tooth and just a small piece that was chipped. I'd weld the tooth back and grind it down. The other is now portable and your able to take it somewhere if you need to do you won't need a mobile mechanic. Just need to find away to replace the bearing on the tractor. Should be fairly easy. This is a keeper for sure
@davidnorthrup3674
@davidnorthrup3674 5 жыл бұрын
Without being there my self and just trying to figure it out like you are, I don't know how to do this but this is what I would suggest. Clean it up really good, replace the 2 small gears, both bearings (the other might fail soon), file the damaged gear teeth on the main gear. I don't believe that you need to replace the main gear. I would also suggest that you look inside the main hub to be sure that there is no damage in there. After you get it going I would use it as a light duty tractor. Good luck!
@sjfarish
@sjfarish 5 жыл бұрын
Yes Josh all those parts are easily found and no I do not believe it will cost that much.. Good luck brother if I had that part I would give it to you but all I have is TO40 parts right now.
@brucetuckey7909
@brucetuckey7909 5 жыл бұрын
you should seek out a tractor salvage yard in your area. A whole housing assembly should be easily obtained. Remove the hole housing from the transmission and install the new used housing. The repair will cost more then the value of the tractor.
@mountainviewturning5319
@mountainviewturning5319 5 жыл бұрын
Great video 👍
@howardwaddill2314
@howardwaddill2314 5 жыл бұрын
Hi Josh, great to see what you are into with these Massey tractors. We had several on the farm where I grew up. Mid 80s we had a leaking axle seal on one side of the tractor-a 265, so a few models on from yours. We didn't have a hydraulic press, which would have made the job much easier. These old Massey tractors generally have or had pretty good dealer support. I suspect those gears were used for a very long period with little change. Related to safety -- I never saw any chocks on your front wheels while you were jacking the tractor rear up. Did I miss something?
@chelemichele1524
@chelemichele1524 5 жыл бұрын
Hopefully you can fix it... shame someone didnt take care of her while they had her...it could have lasted so much longer.. they were built to last forever back then. Not the disposable equipment they sell today. Have a great day 🎄🎄🎄
@flynnclement3254
@flynnclement3254 4 жыл бұрын
We had the same problem and water was the problem so change the oil more often and you need to do the work yourself
@rodneythurmanjr7100
@rodneythurmanjr7100 3 жыл бұрын
You have a rear wheel planetary gears the 2 1inch gears make sure the teeth are good if not you can order parts from your tractor supply that deals in farm equipment. Year make model engine size and there are numbers stamped on the case houseing.
@garlanddavis5115
@garlanddavis5115 5 жыл бұрын
Josh, if you can find replacement bearings, then do some clean up on the planetary gears, clean everything,, check for cracks with some die penetrant, , grind out cracks, hand file or hone any proud spots on gear teeth. there are only a couple of teeth are damaged (3/4 of the tooth remains intact), I'd bet the tractor will operate.
@davidwestervelt6050
@davidwestervelt6050 5 жыл бұрын
I found that when i have had to take off my rear wheels like that. I found my engine hoist to be helpful when taking them off or puting them on. I have a strap i like to use. If i had a tractor with a second loader i would use that. Just thought it might help ya if your working with them in your shop. They are a little heavy. Still not sure why people go to the gym to play with just the large rubber tires. Filled tires are so much more fun to work with. I hope you can find some good parts. Have a great week.
@jamesgrimm8678
@jamesgrimm8678 4 жыл бұрын
Josh Starting fluid works good as a parts cleaner if you find it on sale somewhere.
@Djwally13
@Djwally13 5 жыл бұрын
Option 1- Go on Ebay and find a new or used bearing, geared hub and associated parts. Option 2- I'm sure there is a Tractor Supply or other parts provider that can source a new bearing, and geared hub assembly. Option 3- Find another Massey Ferguson tractor as a parts donor. Hope this helps Josh. 😁
@mikewickman3126
@mikewickman3126 4 жыл бұрын
Are you ever going to do a follow-up video of this issue?
@farmerboy7490
@farmerboy7490 5 жыл бұрын
Hey stoney ridge there here in NC call Greene's salvage yard ,alot of tractors,it in Fremont NC
@cwdtransport2247
@cwdtransport2247 5 жыл бұрын
FYI, mine is a 59 mod 65 Perkins Diesel, Multi-Power. It plays with my JD 10’ trailer mower. Every 3-4 years I have to replace the transmission to clutch slip-on seal, bad design links on to the multipower and main v Clutch makes a mess inside. Parts are not hard to find on the web. First if the teeth are only damaged on the ends, clean/heat to 700-800* prevents cracking, tig weld replace missing metal, hand file the tooth profile and you are good to go. Cheaper than parts tractor. Done this twice and still works. ChiefD
@thurlowfamilyfarm4628
@thurlowfamilyfarm4628 5 жыл бұрын
You can do it Josh; check with Worthington AG for parts. I don’t think those chipped gears will hurt anything
@rt3box6tx74
@rt3box6tx74 5 жыл бұрын
I spent my summers on a MF 50 series shredding and spraying bar ditches on my dad's farm. Notice no muffler protruding through the hood? Because the tail pipe runs underneath and totally cooks your feet and legs during long hot summer days. I still have the one I ran, though it's not been started since the '80s
@ElaineCottrell-u2e
@ElaineCottrell-u2e Жыл бұрын
Just got a Massy Ferguson 65 tractor, it has s clunk coming from the left side wheel wonder if it has the same problem as your tractor, guess I’ll find out. That’s for the video!
@travisbrown2007
@travisbrown2007 5 жыл бұрын
I have welded il the gears.and.the.ring gears that were worse than hours before.just used a hardening rod and took my time grinding and filing them out.the tractor J's still rolling and Kt been five years. Good luck.
@ericduck8273
@ericduck8273 5 жыл бұрын
If you can not find a replacement gear, take them to a machine shop, they can weld on material and then cut the gear shape into the new metal.
@shiningstarfarm8836
@shiningstarfarm8836 5 жыл бұрын
I found a used planetary Pinion carrier for $175 from Wengers online. The gears on the planetary are between $55-$65 each if you are wanting to just replace the 2 gears. The big inner ring looks fine but if you replace that its about $350. If you do the work yourself and sell it for $1500 you should break even. But I have faith you can do the work.
NO MORE FUEL PROBLEMS ON THE FARM!
18:20
Stoney Ridge Farmer
Рет қаралды 56 М.
60 year old tractor looks rough..will it start!
18:39
Stoney Ridge Farmer
Рет қаралды 211 М.
Sigma Kid Mistake #funny #sigma
00:17
CRAZY GREAPA
Рет қаралды 30 МЛН
To Brawl AND BEYOND!
00:51
Brawl Stars
Рет қаралды 17 МЛН
Enceinte et en Bazard: Les Chroniques du Nettoyage ! 🚽✨
00:21
Two More French
Рет қаралды 42 МЛН
Massey Ferguson Hydraulic Repair, Easy Step-by-Step Tutorial
31:54
Dan Gingell and Rachel Gingell
Рет қаралды 1,5 МЛН
Stuck in the MUD AGIAN!! Farm Chores gone wrong today!
20:39
Stoney Ridge Farmer
Рет қаралды 72 М.
Bringing this crusty 60 year old tractor back to life!
32:50
Stoney Ridge Farmer
Рет қаралды 182 М.
Can MORE Dangerous Saw Blades Cut Wood?
23:40
Waterjet Channel
Рет қаралды 825 М.
The 1988 Volga GAZ 24-10 Is a Hilariously Bad Soviet Russian Car
22:26
Doug DeMuro
Рет қаралды 2,7 МЛН
Rotary Valves Make Normal Valves Look Silly - Why Aren't We Using Them?
17:14
driving 4 answers
Рет қаралды 2,5 МЛН
The struggle with cold - Angelica Larsson
17:14
Angelica Larsson
Рет қаралды 101 М.
WHO NEEDS AN AX!
17:49
Stoney Ridge Farmer
Рет қаралды 240 М.
Sigma Kid Mistake #funny #sigma
00:17
CRAZY GREAPA
Рет қаралды 30 МЛН