What the hell is this? (cnc milling)

[@fokusano]

kawal dobrej roboty... naprawde, trudne zadanie wykonane tak jak trzeba 👍 widac ze fachowce jestescie :D Pozdrawiam

[@Convolutedtubules]

Finally some appropriately sized work for the Uchine.

[@PatrikAndersson82]

Nice video. A lot of other videos show only all the normal work that fits nicely in the machines with a perfectly rigid setup.

[@CncFrezar]

Thanks

[@andrealmeida3915]

I really like your videos, could you make a complete video about fixing parts, showing your experience, giving examples of how to fix different types of parts, and showing your fasteners and how to use them in the best way. Thank you in advance if you can Another great teaching and practice video. Thank you!

[@innominatum9906]

Very nice work! Good idea to weld on some support - Ive done something like that before too =)

[@nathaniellangston5130]

I constantly had this problem at the last place I worked where the parts were WAY too big for the machine. For some parts I had to pull the windows out so the part wouldn't bash them out because it was so long in the X axis. Others I'd have to remove all my standard every day tools from the umbrella tool changer and use only a stub tool holder with a stub endmill. In those parts the the "Part" zero would often be ABOVE the "Maximum working height of the machine meaning above the height the tool changer lifts to change tools in an umbrella style tool changer! Always fun to figure out what you gotta do to do what you gotta do! The size comparison of the mills I ran these parts on would make you laugh. On the one I ran the majority of all parts on as the other one was a bit too old and unreliable. The mill was 1/5th the size of your mill. They literally make 1/5th scale RC cars. Thats basically what my mill was to yours. Great work! As always! I hope your boss appreciates you and the time you put into your job and these videos!

[@andrealmeida3915]

Gosto muito dos seus videos poderia fazer um vídeo completo sobre fixações de peça mostrando sua experiência de vivencia ,dando exemplos de como fixar diferentes tipos de peças ,e mostrando seus fixadores e como usa-los da melhor maneira .Desde já agradeço se poder vai ser mais um a grande vídeo de ensino e pratica .Obrigado !

[@vendelin10]

Po odbrouseni těch spojek, nedošlo k deformaci/prohnutí kusu? Předpokládám, že se to něco málo pohlo. Děkuji za info.

[@CncFrezar]

Pohlo to jasne ale nebolo to nejak strašné možno 0.5mm

[@tomaszlatos1363]

Dobrá práce👋. Skvělá videa. Moc se mi líbí, že kdykoli je to možné, používáte zařízení české výroby. Musíte podporovat své vlastní lidi👍. Piju Tvé zdraví🍻🍺. Omlouvám se za Google překladač. Pozdravy z Polska

[@CncFrezar]

Dziękuję. Bardzo to doceniam. Ale my jesteśmy Słowakami.😁

[@tomaszlatos1363]

@@CncFrezar Ach jo!🤦‍♂. Prepáčte, ale to nie je taktné.

[@CncFrezar]

😁

[@robertoberbuchler3659]

Super práca 👍 počujete co je to za frezu s ktorou sa ponorujete do plného materiálu ? Po koľko idete do hĺbky a aké dávate parametre ? Strašne pekne berie..

[@CncFrezar]

Vo videu sú napísané frézy a plátky ktoré so použil. Aj parametre obrábania...

[@lapierretube1735]

Very satisfying 👍👍👍👍

[@Rez441]

Yeah, the supports were 100% required.

[@Convolutedtubules]

Take of the side panels, you can make a component of any size!

[@1bazisko2]

👍

[@mohammadmahdihelali3619]

Hello ,Please take a video of how to offset or zero the X, Y, and Z axes of this part, thank you.

[@hx520w]

What a strange component. I appreciate the english subtitles!

[@GLAJMAN]

I'm not a machinist. How many inserts did you spent for this job? I really like your videos.

[@CncFrezar]

Thanks. The inserts lasted until the end. There was no need to replace them

[@CristianccCasagrande]

Eu acredito que se vc inclinace a peca no eixo x vc consegue usinar ela toda sem precisar mexer ela como você fez é so usar o 3d rot da máquina

[@CNCDepartment-zj1tq]

any specific reason to do the side with the endmill conventional and not climb ?

[@CncFrezar]

The vibrations were less.

[@kostitras7777]

Pekne zvladnute. Ja bych na to nemel nervy :-D

[@firstMexican]

Krásný, když se u práce přemýšlí. Já bych to nechal jet a pak byl nasraný, že se mi to nakoplo 😂

[@andorgcp3979]

😊

[@cc88000]

👍👍👍🤘

[@ramasahoo-o2w]

My CNC operator

[@dmitryserov5595]

Time to get Skoda with 10 meters X axis.

[@JonesAndrew-so9mc]

I am indian we wanted your company vmc Opreator work

[@iCADSXVietnam]

Thank you for your video. The finished product after processing is very beautiful. Why not cut it with a laser, then machine it again with a CNC machine? This will save a lot of CNC machining time.

[@CncFrezar]

I do not know. I'm just a worker. I will do what I have to do.

[@fieur]

@@CncFrezar 😁

[@Convolutedtubules]

Maybe the machine wasn't too busy at the time. Outsourcing work is another cut out of your profit

[@aquilaaudax6033]

✋🏼🇦🇺👍🏼