Wheel Adapters 101

What you need to know when considering Wheel Adapters or Wheel Spacers for your car or truck. Presented by Richard from MyWheelAdapters.com

[@atywood]

Thanks! My son ordered adapters after he bought a set of wheels and tires from a 2005 f150. He has a 2002 f150 I have spent years and thousands of dollars customizing and taking care of. It’s a beautiful and simple step side. I asked if he was sure the new wheels would fit (knowing the 18” rim size would not fit on the current 16”) and he was “sure” they would- i then explained that most parts are interchangeable for 1997-2003 but not before or after… well low and behold he got home (after forgetting to bring the full sized spare on the 3 hour trip) to realize they would not fit and finding adapters has been a nightmare. He ordered a set that is the wrong size and now will cost around $50 to ship back so I’ll be in charge of the next order- however finding a set is very difficult for this truck… he originally wanted to sel after I taught him how to change out belts, tires, battery, fuel pump, fuel filter, alternator, exhaust, etc. Good video, to the point and clear. Thank you.

[@NicolasCageIsActuallyARobot]

is it weird to fall asleep to this video multiple times

[@9T5Z28]

Great video. Got alot of info I didnt know. Will be getting a set of adapters for my GEO TRACKER

[@rjlocklair]

Best video on wheel spacers and I have seen a ton of videos! Thanks!

[@michaels7132]

thanks for the info.

[@boduncan1044]

Very good video. I've been in the automotive business most of my life but not dealing with much on the wheels and tires at side mostly Auto Body Paint and Body and Glass work, with that said I'm rebuilding an 07 Chevy Colorado and I want to put Trailblazer Super Sport Wheels on it. The Colorado is 6x5 and 1/2 and the Trailblazer is 6x5. Do they make adapters for that because I have had a lot of trouble finding them? Thank you very much.

[@specialized29er86]

Or when the preferred wheel manufacturer doesn't make a specific wheel to suit your car.

[@jerryharriman8190]

Really need help. Have a 2003 x5 Bmw 5 lug. I measured like you said from far side of hole,skip one and measure to center of next 43/4 , the new rims i want to put on it measures 4,1/2 ,,,the studs are part of the lug,do you make an adapters to fit that???

[@johnromero3987]

I have 2002 F150, 5x5 stud & I am installing a wheel with 5x5.5 stud. just bought an adapter. is there anything else I will need?

[@19allenjones84]

I recently purchased 4 hub centric adapters from some site recommended by a rim shop and got totally screwed they weren't made corectly I had to shave the back wheel adapter hubs to get the back ones to fit and the front ones i have to buy again smh

[@luiscastelan1016]

cus I have my rims of a chevy 2007 but I got a dodge ram big horn edition 2007 how much for the adapters ????

[@lowhertzhighspl]

DAMN!! I wish I could've seen this video BEFORE I spent/wasted over $300 on stock dual wheel adapters!! It's been taking me DAYS to install my aftermarket wheels bcuz of all of the issues I'm running into such as not having the right size of lug nuts AND hack sawing my stock bolts down. Now my aftermarket wheels stick out WAY TOO FAR! Frickenay! (went from 5x114.3 to 6x127)

[@Iluv__c4ts]

i got a civic 95 2dr coupe 4x100 i believe , but i want to install mazda rx-8 2004 wheels on it . do you make the adapter and price

[@stanleydelano9169]

good video thanks

[@shawncordeiro1150]

2008 3/4 ton chev will 1 1/2 hub centric aluminum work for rear of my truck towing 8000lbs ?

[@robbylee759]

Do you make a wheel adapter that would fit on my 6x139.7 with a 106mm bore to fit a rim that is 6x114.3 with a 78mm bore?

[@bigtween2]

Do you have a 5x112 to 5x114.3 adapter?

[@ralphgarcia6605]

What type of adapter would i need to use on my 97 ford expedition to convert it to 6 lug so i can use my 2016 expedition rims on it ?

[@briandurant1483]

Will your wheel stick out sir ?

[@BurgundyChuckz145]

Anyone know where i can find hubcentric wheel adapters 5x4.75 to 5x114.3 70.3 bore