where to find more copper we got given this for FREE and took it to the scrap yard

[@rubberneckingjks7254]

ABSOLUTELY AMAZING YOU LADS WORK SO HARD LOVING THE STREET SCRAPPING,MORE VIDEOS PLEASE,

[@snoopbob3497]

Nice score there chaps, up north you'd never get that given to you for free, plumbers are tight as arse holes up here 😂

[@goose-shoot9787]

Agree no plumbers in Scotland would have given you that load free there always wanting money for there copper tight as ducks asses

[@simonjones7785]

if you smelt it the paint solder and any other crud comes off the melt as slag you scrape off the top

[@stuartblay2113]

Love what your doing fellas, I used to spend my days cleaning metal in our local recycling centre and go and weigh it in every friday to get our wages I used to love it that was nearly 30 year ago, i gave up work in December to look after the missus after working for the same company for 20 years and was starting to struggle a little with being out of work but watching your videos has made me start thinking of scrap again but it's a little struggle to find it ....any suggestions would be greatly appreciated...keep up the great work..

[@wuz2do]

I enjoyed the video and it sounds like you're fun. Better than setting behind a desk

[@alexsteele1632]

Made me laugh this did🤣you do everything the hard way🤣🤣

[@julianselby3279]

I normally use small spade its loads easier and the foam often comes off in bigger chunks

[@paulbullock3831]

Loving the scrapping videos as I’ve done a load of it myself but love the fishing videos so keep it up young man 😂

[@ultr4sn0w70]

Thanks

[@jobybarney4784]

Nice bit of copper chavy keep the vidoes comeing

[@SkullerMetals]

You had me hooked at "free copper". Great going!

[@juliancrowe9754]

Nice one lads enjoying the channell. ....do a bit of scrapping up ere in the mids in between jobs .them there copper hauls are few and far between but always a bonus when they come in...keep the vids coming. ....CROWEMAN IN THE MIDLANDS

[@thescraphunter6811]

Nice one dude thanks for the support

[@nachostuff]

Totally agree - my phrase is "Always Be Asking" worst is you get a No. Great scores!

[@thescraphunter6811]

Exactly that dude love the channel BTW 👏

[@Scarpmancam]

When I was working at our local scrap yard we used to just hit the copper bails with a hammer to get the shit off it then we used to cut the top of to get the limescale out of it then cut the brass fittings strait in the middle with a discy or grinder then hit the fittings with a hammer again to take um off then just cut the elements of the end of the top brass fittings

[@Madmicksoutdooractivities]

Nice one. That was mad what came out of the tank thing. I 1st thought it was a snake 🐍 😂😂😂

[@michaelpaton7127]

That foam thats on the tank Mate cut lines into it all the way around and from top to bottom that way it comes off in full squares.👍👍✌👊👊

[@tutsywutsy]

I chop the top off the tanks and take all the braziary joints off the pipes and put all clean copper in the tank.

[@williamralph8613]

At my yard they class painted and soilderd joints as heavy copper 👍

[@ThepuffinpiratesEST]

Can’t beat a copper tank. I hit mine with a sledge so it’s dented keep spinning it around hitting it then the foam will come away from the tank easier. ♻️♻️

[@Mason-xq3cv]

That a Nice load of copper

[@michaelpaton7127]

The brass nuts on the pipes it easier to smash them once or twice with a hammer its a lot quicker.👍👍✌👊👊

[@ccartershecticlife]

Easier way of cleaning up copper immersion heaters is to lie them on the side and literally jump off the ground onto its side while holding onto the door of the van or something the insulation pops off far easier

[@paulg4343]

Love the video’s lads , scrapping gives you a great buzz . Ps get the gloves on 🙏

[@williedoyle2721]

Also for removing them brass bits off pipe I use an old loppers

[@williedoyle2721]

Me also it’s less time consuming

[@donaldvane4109]

maybe he should get a little closer while you are waving the knife all around trying to clean the tank off

[@RGTravelss]

Loving the videos, don’t slow down now!!

[@fishypie]

happy christmas copper time pal

[@TheVeyron81]

does the brass not need to be totally clean ie completely seperating the bits of copper pipe left in the fittings

[@wuz2do]

Copper has a higher value so they don't mind it being there

[@ebonilou3100]

Hit the side of the tank with spade it will come off straight away

[@tompyrouk4335]

Just pick the cylinders up and slam them down comes off easier and bigger pieces

[@Le10-]

Keep up the vids mate 💪

[@daverickards7647]

Where did you get the blade for angle grinder from ,,,,, Toys R Us 🤣🤣🤣🤣

[@iantowers6972]

🤣🤣🤣🤣🤣👌👍

[@joestiff3689]

I would hate to think how many of them copper tanks I have cleaned after working at a scrap yard for 20+ years best I I found to clean the lagging of is to use a big axe or hatchet and go round the top first then lay it down and just go down the length of the tank in 4 straight lines and and most of them will just pull of in 4 bits although some u will have to just get the lagging of in small bit like u did with that one hope that help’s great video by the way

[@thescraphunter6811]

Cheers bud hopefully I get a few more lol

[@71PG]

unless it's the dreaded blue foam! hate that stuff

[@williehanlon3369]

Use we 40 with big paint scraper and it will peal off like orange.

[@williehanlon3369]

WD 40

[@andystevens4326]

Gloves lads gloves look what your handling and where it's from

[@leefelton9637]

Not a bad touch easy come easy go ✌️

[@bfdmanbfd]

If I left all the solder joints on at my yard they would give me Brazory prices

[@thescraphunter6811]

We're pretty lucky down here

[@dbandz2625]

We have no1 copper in Watford but need to be clean no solders or brass good yard you got merry Xmas lads

[@bfdmanbfd]

@@uptonz7963 brass price??? I said Brazory even without any brass connect on it if it's copper and only copper free from soilder and brass I get heavy copper if not then I get Brazory

[@snoopbob3497]

Must have been to more than a dozen yards of the years, never heard of it being down graded becuae of paint or soldering. Brazery is copper pipes with brass attached, has to be 80% copper usually

[@bfdmanbfd]

@@snoopbob3497 that's how it should be if it's got paint on it will be graded as heavy copper but any joints then it won't I have had meny arguments with them over it so now I just remove them all

[@michaelpaton7127]

That pipe your smashing out of the tank all you had to do is smash it in the way with your sledge hammer.👍👍

[@stevendale7658]

Gonna need a bigger grinder 😂😂😂

[@wuz2do]

Hope you don't mind if I ask how much is that in us money

[@Atlantismonkey40]

I worked in an ER or trauma center, depending on where you live. Love, watching your guys. But, come on guys! Your working way too closely together, too be using that cleaver. Be safe out there. Remember, 2-5 minutes too bleed out. Safety first.

[@Satsuma]

whats your fishing channel called mate

[@thescraphunter6811]

Fish hunter uk bud

[@steaniehall9032]

Best way to clean them tanks is to jump on them falls straight off

[@chrislloyd7792]

Do you split 50-50?

[@thescraphunter6811]

After fuel yes

[@Charleyurmston13]

Keep up the good content fella Danny wigan ✊

[@simmo321]

How to slice your leg open 🤔

[@kevinraines4318]

after seeing you scrap that tank and getting the rad out off the boiler in the last one you have not been doing it long 😂

[@thescraphunter6811]

Lol can you tell 🤣 😂

[@offroadjode1]

Got some scrap for sale how do we get in touch

[@johngerardmccarthy9103]

Get the Drill boys from Camberwell they will do that in seconds.

[@williedoyle2721]

I don’t bother taking that foam off my scrap docks two off so to me it’s just hassle

[@williedoyle2721]

Two kilos

[@uknick12info1]

You need a diamond angle grinder blade

[@ultr4sn0w70]

Really enjoy your content :) Do you want me to find a licensed copy of Power Director for you?

[@thescraphunter6811]

What's that mean bud I to remove the water mark ??

[@ultr4sn0w70]

@the scrap hunter yeah, will be able to remove the watermark and add your own words I.E branding etc.

[@thescraphunter6811]

Can do bud thank you

[@ultr4sn0w70]

Did the link get removed?

[@williedoyle2721]

Scrap yard I go to take off a kg for foam so not worth the time taking off for me

[@smithy2k13]

Save it up then weigh it in at end of year

[@MartinShaw-ps6wt]

How to contact you? Thanks

[@thescraphunter6811]

[e-mail] send me an email buddy

[@matty1597]

Shud do that on a tarp easy to tidy up then

[@thescraphunter6811]

Good shout that 👌

[@matty1597]

@@thescraphunter6811 like the guy at scrap yard said work smarter not harder haha be lucky

[@simonjones7785]

now Id smelt all that copper and turn itt into ingots

[@richardpatterson7726s]

Dunno if its just me pal but christ u make things look hard work lol. Them cylinders take me 5 mins to clean up. 🤣

[@thescraphunter6811]

I'm left handed lol its a disability you know 🤣🤣

[@bumbaclartz]

gowan geez

[@multipreach2674]

If you let the grinder pick up to full speed before you start cutting it won't cut out. A bit more patience needed, no offence but you lads are a disaster waiting to happen.

[@waynehardiman5443]

Lol £5 a kilo not a chance your get £30-£40 for that tank and the copper I bet you paid the guy to take it away I got offered £40 the other day from a Romanian to take the boiler and rads I’m like nah just take it and he’s like what about copper no chance son lol so no plumber is going to give free scrap away at all

[@thescraphunter6811]

Well these boys did and 5kg a kilo not a chance what do u mean

[@gazb87yorkshiresalt48]

I knew you were a communist using a sickle! Where's the hammer? Good job fellas. Subs going up at Decent numbers as you do a cracking job. 🏴󠁧󠁢󠁥󠁮󠁧󠁿🏴󠁧󠁢󠁥󠁮󠁧󠁿🏴󠁧󠁢󠁥󠁮󠁧󠁿

[@llamedosr7843]

Long handle chewing gum scraper would of stripped that in 2 minutes

[@llamedosr7843]

And you wouldn't be cutting towards yourself

[@bobwilkinson4377]

for all the money you make buy yourselfe some decent tools to do the job

[@thescraphunter6811]

I don't make loads of money lol I have to run a van a car a 3bed house and a family of 5 on this money and that's without getting rinsed by the tax man

[@craigobrien31]

Shit on tank I always use a spade so easy

[@imyoureboss7604]

Not a chance a plumber gave it away free no chance

[@thescraphunter6811]

He did and will hopefully be getting more

[@Handsdown83]

Down south he is probably charging enough and cant be arsed with it

[@jackw9920]

Fair play, that plumber is literally throwing money away though. All the ones I’ve ever met save it up like crazy.

[@imyoureboss7604]

@@jackw9920 every plumber I no save it up all year then way it in split between them all