@@ElectricianU wasup with the long sleeve shirts bro?
@TRUTHproJects3 жыл бұрын
I have been waiting for the fuel m12 bandsaw for years. I feel like a 10 year old on Christmas morning right now. Super pumped 💪
@SdotFive4 ай бұрын
does it work well cutting emt (3/4 and 1")
@robertthompson34472 жыл бұрын
I have a lawn service, I watch your videos for other reasons. But I have had my M18 Lawnmower for 8 weeks now and have been loving it. This is the mower that doesn't make me feel like I need to keep a gas mower around for "just in case".
@bartfoster1311 Жыл бұрын
I just use the big bandsaw, especially since I am mostly cutting 4 inch ductwork for hvac along with threaded rod and unistrut. Hands down the easiest way to cut 4 inch double wall pipe until they create a real lightsaber! I have the 40v Makita and it is an absolute beast! Having the 44-7/8 blade is also nice because it is a common size.
@tonyj80823 жыл бұрын
I have the tiny m12 bandsaw, I love it! Very small and easy/light to pack in and out with my other tools. Straight cut I haven't been able to cut 1 1/2 EMT, but if you cut a ring around it, up to 2" EMT is no problem. Deep strut it will do but only if it's a perfectly straight cut, otherwise better to cut one side at a time, very straight that way too. People always make of of my "Lil Ms. Red", but then always ask to use her in tight spots lol! Can't wait to get that new m12 fuel!
@RB-xv4si3 жыл бұрын
Man the M12 fuel bandsaw is the most overdue addition to Milwaukee’s lineup I can think of. I’ve been wanting an M12 fuel bandsaw for like 5 years. Why did you take so long, Milwaukee?!
@christiansantos89042 жыл бұрын
Got it, Love it
@zachsanderson10702 ай бұрын
I found that the m12 bandsaw only really shine in residential jobs my personal experience with the m12 bandsaw and cutting angle iron.......struggle is a nice way of putting it and it seemed to lose it's overall power after about a year I ended up purchasing a new 12 one and same thing happened after a while just felt like the motor wasn't motoring. However I just got that m18 compact and I'm super stoked to use cause the deep cut us perfect for my commercial uses just hate the weight and awkwardness that the deep cut can create in certain situations
@azael8313 жыл бұрын
Pro tip, go buy a thumb screw and swap it for the torx screw. There, tool less guard my boys
@mauricekaysen97833 жыл бұрын
You prolly dont give a shit but does anybody know of a way to get back into an Instagram account?? I was stupid lost the account password. I love any assistance you can give me!
@zahiremiliano24853 жыл бұрын
@Maurice Kaysen Instablaster =)
@mauricekaysen97833 жыл бұрын
@Zahir Emiliano I really appreciate your reply. I got to the site through google and Im waiting for the hacking stuff now. I see it takes quite some time so I will get back to you later with my results.
@mauricekaysen97833 жыл бұрын
@Zahir Emiliano it worked and I finally got access to my account again. I am so happy:D Thank you so much you saved my account !
@zahiremiliano24853 жыл бұрын
@Maurice Kaysen Happy to help =)
@DailyDopeamine3 жыл бұрын
YES!! Finally you are back, haven’t been watching any electrical videos because nothing keeps me interested like you do! Glad too have you back and hope all is well with you brother!! I’m a year into my apprenticeship now and the amount of times your videos have come too life is amazing! Thank you for everything and I’m excited too see you back!!
@AlexDenton04513 жыл бұрын
I’m a 6 month in apprentice and I’ve got both M18 and M12. I have gotta say guys, M12 surprised me. My M12 Impact is… I ask a lot of that thing, and do things that it’s CLEARLY not designed to do (how about drilling 6” deep 7/8” holes), and she still delivers. Still would say start on M18 however, it’s more versatile and your company will likely have spare batteries to toss you if you need some juice. Also when it comes to brands Dewalt isn’t a bad choice either for their 20V stuff, and WAY too many people sleep on Makita’s incredible Build quality and designs. Regardless though, red and black suits me, with Milwaukee’s kick ass RnD and just raw power in their tools.
@ElectricianU3 жыл бұрын
Couldn’t agree more, with all of it
@mikeyd15133 жыл бұрын
Keep on keeping on bru, you'll have every brand one day and every tool
@joshcowart24463 жыл бұрын
The only battery powered bandsaw I have is the m12. I’m a plumber so I don’t use them as much as an electrician would. Now that we don’t cut and thread black iron the band saw is perfect. I have the corded version of the Milwaukee big bandsaw that I pull out if I’m doing a big gas job. I’m excited to see the bigger m12 because the current m12 mainly gets brought out for strut and ready rod but it’s hard to cut the thicker strut with it. It also looks like it will cover almost any job we do. We rarely go over 2” except with pvc and that easier with a sawzall. And if we are cutting 2 1/2” and up copper or black iron I can easily run a cord.
@Edgardocelectric0073 жыл бұрын
For years I always used a saw-saw then about 7 years ago I got the medium size bandsaw and I rarely see my saw-saw anymore best tool for cutting conduit. You should have mention that the one item you can add to all the bandsaws is the pipe reamer it attaches to the drive wheel so you can also ream your conduit for a clean cut. Also you can attach the saw to vertical 2x4 stud and it will stay attached and use it sorta like a table saw Great video 👍👍👍👍👍
@cheeeseinacann Жыл бұрын
Wtf is a saw saw
@jordanhawley78718 ай бұрын
Think he meant Sawzall lmao
@Lkom243 жыл бұрын
Hvac guy here, haven't watched the video yet but after using all of them over the years, the m18fuel compact is the best by far especially with a high output 3.0..you can cut strut,conduit you name it with no problem and climb ladders with this thing.only complaint is finding blades in stores. My favorite tool I own then the 12v surge... Edit: you need to get a ridgid tripod and cut your material! So much easier, yes not as fast but better cuts
@zmakattack3 жыл бұрын
These are great for cutting all thread without having to chase the threads and cutting liquid-tite without any burrs or tear out. I've only have the deep cut, but it gets the job done, big or small.
@ElectricianU3 жыл бұрын
Agree, it cuts threads beautifully 👌
@saiiiiiii16 ай бұрын
What's the smallest thread size this works on?
@VolpeInCalze3 жыл бұрын
I almost got the m18 deep cut. Ended up going for a greenlee corded bandsaw. Made in usa and all metal. Still works great, new blade and cord. I plan on doing new brushes and greasing up the gear box in the near future. Down the line (if I'm doing more conduit work) I'm probably going to scoop up a baby m12 band saw. A coworker has one. Theyre nice and compact.
@Einzee3 жыл бұрын
You need 2 of 'em. Smaller one for 2" pipe. It's small enough to use all day. The other one should be capable of 4" pipe. Too big to sling around all day but needed occasionally for larger projects. JMO.
@PatrickBMusic-sf2hu2 жыл бұрын
Just my opinion, I think the M18 Compact is the only one most guys will need. I have the little M12 too but anything over 1/2", I feel like I'm waiting on the tool. The M18 has never felt heavy to me and will rip through anything you put in front of it clean and easy. I wouldn't personally buy a deep cut band saw because most of the time your Company will have a corded one if you're doing big pipe. Thank you for the thorough video!
@tylermareth26333 жыл бұрын
Got it. Love it. Older guys talked crap until they used it overhead themselves 😅
@tommyc57503 жыл бұрын
I have the non fuel M12. Been running it for 5+ years. It’s nice having the small size to one hand cut. It does 90% of what I need. It will even cut deep strut though the last 1/16” is a fight. Never really needed more power. That said I’m still eyeing this new one up cause why not? I have just recently moved into some m18 tools though...
@wb5mgr3 ай бұрын
Love my M12 Cordless Portaband. For the big stuff though I still use my trusty Milwaukee 120v Deep Cut with the optional stand that makes it into a chop saw. That is nice a a cut station for chopping strut and allthread. The M12 saw is awesome for anyone who is an installer of any type, residential Electrical or Plumbing or Light Commercial. So much 1” and smaller stuff to cut in those trades.
@Squat50003 жыл бұрын
The best one is the one I can afford. Right now, that aint much, but the bandsaws are great for line, tower, and general electric work. Couldnt imagine not having one at this point when cutting rigid or strut.
@marioskills22883 жыл бұрын
If you gonna get one of these, you’re not gonna get both” Me who already have the M12 Sub but digging out the new one-👁👄👁
@IceBergGeo3 жыл бұрын
So far, you're the only one I've seen mention the blade size. Thank you!
@marwancortez80823 жыл бұрын
Love this vid. Learned mucho. Thanks a million. I don't donate to u but I do let all the commercials play. So hopefully that helps
@dwaynephillips34573 жыл бұрын
Glad to see your back Dustin! Great content! I watched all your videos before starting and during trades school. I’m 46 out of school and just over 5 months full time into the trade and loving everything about it!
@mml3140 Жыл бұрын
Hows it going for you ? Hows the money and work availability ?
@Fitingbros1014 ай бұрын
got all the bandsaws besides the sub-compact. I love the compact m18 the best since it's not too heavy to hold with 1 hand comfortably all day and it does work on anything, but the m12 is awesome when it's possible to use it
@michaelwalker9734 Жыл бұрын
I have the Milwaukee M12 sub compact Bandsaw. It’s great. Very light and gets the job done. Electrician in Virginia.
@rhensley053 жыл бұрын
Heck yea my dude. I just ordered the m12 fuel. Gonna sell my old m12 bandsaw to one of the apprentices for $40 to help’m out.
@wb5mgr3 ай бұрын
The name for that is actually a “rafter hook” because those originally came on circular saws and tradesmen would use that when framing to hang the saw from rafters and joists.
@paisleybruise68273 жыл бұрын
So good to see you back sharing your knowledge with the world.
@treehugger4916Ай бұрын
I’ve used all of them. The only two you need are the m12 fuel and the m18 deep cut. M12 fuel is the best for the first buy since you will much less often cut conduit larger than 2 inches.
@ForFucksSake575913 жыл бұрын
Got the regular m12 bandsaw for Christmas. I just returned it to Home Depot to preorder the m12 fuel. Only a $60 difference in them and I need the larger cut capacity. Sadly I’m not patient and only place Ive found selling it is acme tools for $229. They will let us pre order it, but estimated ship date in February 7 🤣 Still worth the wait, I only do low volt work so I don’t need a deep cut band saw often. I really only returned the smaller one because of cut capacity, it was so light and compact but just can’t cut much with it in my field. The 2.5x2.5 on the m12 fuel is perfect for me. Like you said I’ll just use hacksaw for the bigger 2.5+. Also I’ve found before when cutting conduit with the small m12 you can turn the conduct as you cut it and can actually cut a much bigger size and 1 1/2 if that’s all you got. Loved the video. Great comparison and real world scenarios. Happy holidays
@erikyoung256 Жыл бұрын
Excellent for pipe fitting. 4 in on down both steel and copper! Thanks big dude!
@chrisfenner66323 жыл бұрын
The speed dial on the m18 bandsaw is for when you are cutting stainless strut or rod, or any metal that's super hard. You will burn up your blade before you get through if it's on the fastest speed.
@TheMetalButcher Жыл бұрын
But you can just pull less on the trigger? Whatever makes folks happy I guess.
@benjaminromshak29213 жыл бұрын
I absolutely love the m12 bandsaw but will def be buying the new fuel version. They addressed the two major things that I wished the old brushed model provided..a 2” cut and a rafter hook! Def wish they used the same blade though. Not a game changer but would have been nice.
@benjaminromshak29213 жыл бұрын
Plus that optional pipe reamer is the bees knees!!
@davidgunneson24533 жыл бұрын
I bought the small one years ago. Fantastic tool. Before they came out with the smaller band saws I called up milwaukee and told them I would like one made smaller. The person that I talked to was very rude and didn't like the suggestion.
@AlexanderGarcia-yv2xb3 жыл бұрын
Doing solar installs and would love the regular m12 all we cut is 3/4 conduit and channel struts. Don't need anything bigger.
@adamlewellen50813 жыл бұрын
I have a m12 subcompact, good for up to 1 1/4.. love the m12 line. Way lighter and just enough power if ya get in a pinch. Not for every day hd use though.
@calebleuciuc6703 жыл бұрын
The fuel versions of both have a reamer attachment on the bottom which is also super convenient
@SPdesi13 жыл бұрын
Welcome back! Thank you for very informative video on Milwaukee Bandsaws. My question is would you use Big M18 to cut railings while installing a solar system on a roof or you have a better suggestion?
@leonardodivinci8043 жыл бұрын
Thank for returning one of the best electrical information sources around. Looking forward to your take on Wego connectors and whether you should put electrical tape around switches or outlets. Thanks again.
@michaeldudash2 жыл бұрын
The pack out system has such good metal clasps. They should use that design for the clips on the bandsaw so the cover doesn't fall off all the time
@currentliveoccupant3 жыл бұрын
I have the smaller M12 and love it. My friend and I are building a carport at the house and he brought over his deep cut M18. We were able to cut 6 x 6” I beam with it! Now I’m looking for the best deal on one!
@BouncyThrone2 жыл бұрын
I have a cordless dewalt deepcut. I've been useing it to to cut 3" pvc when running flu, all-thread, unistrut, gas pipe, etc. I can walk into my local supply house and find dewalt blades on the wall. And I'm still on my first blade. I can lean it against my leg and make one handed cuts with ease.. Bad ass. But I recently picked up a Milwaukee m18 fuel compact for smaller cuts and I can't believe the fiasco with blades. I literally burned up my 1st supplied blade, and had no teeth left after cutting one 1/2 inch black pipe.. Wtf.. I've been on the phone with Milwaukee but I can't seem to get a straight answer on what blades I need for general HVAC and electrical work. It was an EXTREME THIN METAL blade. I found some 48-39 0529 blades at ace a town over, but may just box this up and send it back if it's gonna be this hard. No point in having a bad-ass tool if I can't get quality blades for it. The saw feels sweet in hand tho, so reluctant. Any advice?
@BGLucifer3 жыл бұрын
I own the older compact. Kinda heavy, kinda bulky and no ladder/belt hook option. That said i still really like it, just wish it had the hook, will probably make one. On a side not the makita compact is also really nice. Much lighter and comes with ladder hook.
@MrDarthbader3 жыл бұрын
I bought the newer non fuel compact like 2 months before they released the fuel version. I was so pissed. If you find a good system for the hook, let me know! I've been thinking of doing the same, just haven't found any hooks or placements to work yet
@Vibe_xvo3 жыл бұрын
Needed this. Was considering getting a band saw now I know what one I want.
@joejoe69493 жыл бұрын
Man once you get a compact band saw you’ll be like how have i live without this. You’ll rock and roll thru conduit jobs.
@Coxfame Жыл бұрын
Whats up mate. 10 years later I still use mine with the 20v batteries. Funny thing is hercules brand blade 2 piece for $14.99 and made in America and fits this saw.
@Rorian52943 жыл бұрын
My philosophy on tools is Go Big or Go Home. If you can master the biggest tools as an apprentice like I'm doing, the smallest ones will be a breeze. Might not work if you dont have Lumberjack Hands like me though...
@AlexDenton04513 жыл бұрын
See I tried this approach for Drills, but when I swapped from a Super Hawg to a regular Hog, it felt way better. Then when I swapped from a Hole Hawg to a Gen3 Drill Driver I couldn’t go back. Now I’m waiting on a Gen3 M12 Drill Driver, since M12 has surprised me so much with its power. Of course my hands just love the M12 tools too, I’ve got large hands and I’m able to just get a gorilla grip on those tiny tools, especially with the wide bottom.
@Penguin545 Жыл бұрын
Sizes are hard to find so here they are- 27” (12v not fuel) 30 9/16” 12v fuel 35 3/8” 18v (Dustin was wrong, it’s not 35 7/8” as he said in video) 44 7/8” 18v deep cut The 35 3/8” Milwaukee or 32 7/8” Dewalt/Ridgid are probably the most overall versatile if you can only buy 1. Those little 27” saws though are super handy as a second specialized bandsaw once money allows
@daireklewis19213 жыл бұрын
Bro I jus discovered your channel. Excited to go through the the videos and learn! Thanks for this. Please keep making videos for us who are absorbing all this great info! Cheers
@jray53633 жыл бұрын
Nice video! I think you covered all the bases. Milwaukee Rocks! Been wanting one for a while, and I honestly didn’t know they had so many options. Looks like the new M12 is the winner for me. Thank You!
@UGKxBatman252 жыл бұрын
As a plumber the m18 compact is perfect for daily use didn’t know it came with a reamer attachment so def getting that asap !!!
@alexiscordero56393 жыл бұрын
Great idea to have the double trigger system cause I watched a guy use one hand and the other on the pipe and after he cut the pipe the band saw sliped and almost cut his finger off
@CAMMEDcivic3 жыл бұрын
I like using my subcompact for emt and caddy brackets, my fuel mid size for rigid and struts, and for anything above 3" I just end up using my hacksaw, the deep cut is just way too heavy for my liking. Cheers. That midsize fuel has a reamer for EMT adapter it works pretty good only downfall is the way Milwaukee designed it to snap on the the bandsaw it tends to fall off a lot.
@andrewtucker20142 жыл бұрын
This is exactly what I was hoping to find, thanks for this!
@mlwest89753 жыл бұрын
I pipefit and pipe weld. I’ve cut 6” sch 80 pipe with bandsaw. Pretty sure I had the thick metal blade it be better but I had to roll the pipe cut a quarter at a time. Way quieter and no sparks. It is to big for 2” pipe so I’m prolly gon get the compact m18. I’ve made my corded bandsaw into a benchsaw. I agree with most or all of the stuff you’ve said. Great review.
@sebastianruiz47283 жыл бұрын
Which is more powerful? The 5-inch corded? Or cordless? Don't really understand the need for a HUGE cordless. If you're using one, you're most likely on a big project for a while and you likely have a cutting stand to hold the pipes in place (or something) so just having a cutting station would probably be more economical overall.
@jorgeruiz38023 жыл бұрын
Finally a new video. I didn’t have a notification on my phone like the videos in the past. I just checked the channels I’m subscribed. I’m happy watching your videos 😄
@ElectricianU3 жыл бұрын
🤘 thanks for watching my dude!!!
@fomoco300k2 жыл бұрын
Dustin, one year later are you still liking the M12 Fuel subcompact bandsaw? Pros? Cons? Quirks?
@DaCrunkwizard3 жыл бұрын
Came in with the clutch video! Was gonna buy the M12, now gonna wait for the FUEL unless they go on sale lol
@mostlikelywedoitservices6926 Жыл бұрын
My small is the 12v, and my large is corded. I use the small so often. But heavy steel cutting, I pull out the corded.
@falkmachtsachen3 жыл бұрын
Being German, i have a Bosch GCB 18, which is kind of like the small one you showed with it's 2,5" capacity. We don't do much metal conduct in europe and our pvc stuff can be cut with butterknife, but i use my bandsaw for construction stuff, mostly B-type aluminium profiles.
@ElectricianU3 жыл бұрын
We do so much metal here lol. And I wish I could cut our PVC like butter...but then again, that doesn’t sound like it protects the conductors very well if that’s the case. How do you like the Bosch?
@jeremyrodriguez59233 жыл бұрын
Could you make a video about working with PVC Coated rigid conduit?
@PatrickKQ4HBD3 жыл бұрын
I'm almost done with school. Depending on where I go to work, I'll be buying the new M12 saw, doubtless. I'm mostly a DeWalt guy, but not strictly.
@gavinbessford10063 жыл бұрын
Dewalt do these also
@Meatwad.Baggins2 жыл бұрын
The speed setting isnt all that ridiculous when you are cutting structural steel. Imagine there is 500 lbs on each side of the cut and it binds up. At max speed you are guaranteed to throw the blade out or snap it in half. I never take it below 3 tho.
@jeremyrodriguez59233 жыл бұрын
Perfect timing! I was just looking into getting a band saw xD
@anthonysmith94103 жыл бұрын
That mini band saw is awesome
@Eayala173 жыл бұрын
They stopped making the m18 non fuel bandsaw. I got mine about 5 years ago, still works like the first tome
@BouncyThrone2 жыл бұрын
Great vid. Answered all my questions.. Thanks man..
@chuckmacdonald11513 жыл бұрын
Huge feature you've skipped is bench cutting - using the tool upside down. right hand to operate the trigger and left hand to drop your work onto the blade. The first model is the best for that. Awesome saw.
@nuworldman92806 ай бұрын
Great video, good job
@brandonbenbow78852 жыл бұрын
The M12 FUEL line of tools are the perfect size and weight for HVAC technicians as they have a lot of power and get the job done just as well and I don’t have nearly the weight to carry around
@ryangracey1254 Жыл бұрын
How well does the m12 fuel cut unistrut?
@markk39483 жыл бұрын
Wow you are very informative. Love your videos thanks
@o0TheKayKay0o3 жыл бұрын
Why would any one want a dual trigger? Great video!! Just found your channel and am happy I did!
@ElectricianU3 жыл бұрын
It’s really to ensure safety by forcing you to use two hands with the tool. That way you can’t try to work it one handed and hurt yourself. I’d imagine they don’t sell very many of these, but sell them for OSHA adherence on some jobsites
@o0TheKayKay0o3 жыл бұрын
@@ElectricianU oh ok that makes sense. Because I’m thinking, on an actual job site, I would never want a two trigger tool. I’m a female electrician and my hands barely fit the one trigger system lol so two triggers would be hell for me.
@eliascruz9757 Жыл бұрын
The M12 is cool too cut very fast an specific
@disabilityrightsadvocate Жыл бұрын
Great video!
@uzo992 Жыл бұрын
I would really like to own one of those for cutting pipe when I go to the jobs but you just can't do it because if you do everyone else will want to use it too. It would get messed up quick. Thats why not everyone has one. Not because they don't want it or don't have the money.
@mmayhem2148 Жыл бұрын
i have the m12 fuel and i love it!!
@zafarsyed6437 Жыл бұрын
You should update/ redo this video with the newer versions... and then giveaway 5 to the people who comment with very good suggestions (like this one! 😃 )
@rodolfosuarez29883 жыл бұрын
How does the new brushless compact bandsaw 12v compare to the Dewalt atomic 20-volt bandsaw?
@mikeknoeber65073 жыл бұрын
I'm curious about the reamer option for it....
@heightskings66933 жыл бұрын
I got a compact ( non brushless ) and everyone would use the big deep cut to cut 3” emt or rigid and walk back and forth to the tripod . I would just spin the pipe in my hand and cut the pipe and got done twice as fast , I want the brushless so bad .
@heightskings66933 жыл бұрын
I just saw the part for the compact , they do make a non fuel compact
@midnighttutor3 жыл бұрын
Very informative review. Can you please comment on how hard it is to get a straight cut with the deep cut tool? Even regular bandsaws sometimes have blade drift. Thank you.
@shawnwaterssw3 жыл бұрын
Great Video. I have the M12Bandsaw. I love it.
@rodolfovesga9792 жыл бұрын
I have to a mini ban 12 series all my powers tools are Milwaukee all my hand tools are Klein but now after that awesome video I want to buy newer 3 inches one sub compact Milwaukee 12 series I also need Milwaukee 18 volt hole hawg too lol I’m big fan of Milwaukee tools I love all my tools lol thanks for video
@krich1062 жыл бұрын
2 button thing, same reason why I don't like over done safety measures on my firearms either...
@Aepek3 жыл бұрын
Funny, as watching Pipeline yesterday on live stream & commenting on whether anyone ever done vid on all the bandsaws; t(an BOOM 💥 Your video😂 AWESOME! Love the new m12 fuel & excited bout it.
@sparkythebuilder3 жыл бұрын
First thing you do is open up the tool and disable the lock on the trigger. Makes using the tool much easier.
@BloodyCaesar223 жыл бұрын
Dude I’m so jealous of that m12 fuel lol
@davidlang5763 жыл бұрын
Good to see ya back, where the hell have ya been?
@willschultz54523 жыл бұрын
All my stuff is dewalt so I hate to have both brands but I do like all the Milwaukee stuff also. I might just invest in one of these👍
@ralphcosenza16462 жыл бұрын
Thank you for the info
@robertbarnes24193 жыл бұрын
Love that m12 band saw, and talk on the price? Gots to get me one!
@jaerickgaming21432 жыл бұрын
Recently bought the sub compact m12, really love it. Just the battery consumption is the only problem for me, granted I cut a lot (I mean a lot a lot). Kind of wished it had an m18 version of it.
@rikivip2 жыл бұрын
Get an adapter
@pacogerzon57403 жыл бұрын
Good video it help me out👍
@RedneckTactical103 жыл бұрын
Does the m12 fuel fit inside a packout though?
@nobadmojo703 жыл бұрын
Have you tried using Diablo's Steel Demon blade? They have one specifically for strut, emt and ferrous metals? It's pretty sweet and can go in either a 6.5 or 7 1/4" blade for circular saw. Depending on size It's 20 to 30-ish dollars. It makes clean and square cuts.
@tony-be3ty Жыл бұрын
Why not get a circular saw?
@shawnwaterssw3 жыл бұрын
Great Tool Review. Keep it up.
@allanyang213 жыл бұрын
the m12 bandsaw is already $200 cad at my home depot. i hope the M12 fuel bandsaw will make the current bandsaw cheaper. The current one is already very good.
@ArkamasRoss3 жыл бұрын
There is something really futuristic about these things.