Which of THESE Is the Best Copper Bullets for Hunting Out of the Sako S20 Hunter?

[@Hatch61]

You really have to enjoy a day at the range, thanks for sharing your results. I enjoy precision hand loading, and I’m always amazed by the groups of some factory ammo. Very impressive, be well my friends.

[@ReviewThisThing]

Some of these loads are unreal for factory!

[@ukriroutalempi5124]

Sweden and Finland know a lot about ammo and guns. Sako and Norma are very good!

[@ReviewThisThing]

They sure are!!!

[@The_Judge300]

When it comes to the Barnes ammo, I highly recommend you to try the 130 grains TTSX BT ammo. I have found that to shoot well in many more guns than their 150 grains ammo. When I reloaded for my now ex-wife, and her Tikka T3, I also found it easier to get good accuracy with the 130 grains TTSX BT bullet than with the 150 grains one and it also proved to be a VERY good hunting bullet, including on moose.

[@ReviewThisThing]

Very nice! I DO wish I had tried the 130 grain, but I was trying to keep them close to the same.

[@TomL3grandsons]

Enjoyed your video. We use Barnes TTSX 130 grain in my grandson’s 308 and it’s screaming at about 3200 fps and has little recoil with a suppressor, he’s 10 years old and he loves shooting his rifle.

[@ReviewThisThing]

Now that sounds pretty awesome!

[@ericksturm7167]

I shoot the Barnes Vor tex168 out of a Savage 99 in 308 and get sub 1” groups at 100 yards. My rifle loves that round. As stated below, find the round your rifle likes and shot it.

[@ReviewThisThing]

That’s it!

[@gunjunky187]

I've had good luck with Barnes LRX in 6.5 PRC.

[@ReviewThisThing]

Thank you. Good to know.

[@qeull]

I have the same rifle and only use Sako ammo, powerhead blades to be precise and it is the best IMO for that rifle. None of my Sakos have shot well with Barnes.

[@ReviewThisThing]

Those Sako are sick!

[@Mgm77mathis]

Nice comparison! Just be sure your barrel is clean if you’ve previously shot lead loads. This will give the copper bullets their best chance to group well.

[@ReviewThisThing]

Thanks!

[@tothemaxxoutdoors4771]

I’m guessing Sako did there homework before releasing that factory load, that’s fantastic groups for factory. I’m a Barnes bullet fan but I’m a reloader, not much experience with factory stuff anymore.

[@ReviewThisThing]

We were blown away!

[@tonymills7883]

Make sure you clean you bore if you have been shooting regularly with lead bullets .

[@ReviewThisThing]

👍🏻👍🏻

[@Longtrailside]

Some rifles like different bullets and hate others. Mine love Barnes . Both get under 3/4 grp. Though they hate winchester coper rounds which are around a 2 inch grp. Find what yours like, and the batch number and buy the lot of them. Otherwise youll need to handload to get your favorite bullet to shoot accurately.

[@ReviewThisThing]

You got that right!

[@tigercub12]

What is the name of the video set up you use as you’re shooting these groups?

[@ReviewThisThing]

We have the Tactacam Spotter LR amzn.to/4dXcJwp attached to a spotting scope - then connect to the iPad.

[@mr.mr.3301]

Did you see backfire a few weeks ago, tested the clean barrel theory for copper? Apparently it makes a huge difference in grouping. I’ve heard it before but never seen anyone test it. So the moral of the story for those watching if you have been shooting lead clean your barrel before going to copper. Also accuracy drops on copper rounds as there’s more ammo shot through it but that’s just my observation from the one video

[@ReviewThisThing]

I haven’t seen it, but a lot of people have mentioned it - and a Ron Spomer video. Good to know.

[@eggbert191]

Backfire is a clickbait hack to sell views.

[@DrMike-64]

Mr.Mr. & Adrien- I was seeing poor results shooting copper after lead. Saw the Backfire/Spomer videos and tested it myself. It’s 100% spot on- if you want accurate monolithic results, clean your barrel extremely well then shoot the copper.

[@ReviewThisThing]

😳

[@rickyflinchum2909]

I like that rifle, if it didn't come in a thumb hole stock. Not a fan of thumb hole stocks. Not a fan of all copper bullets either but got some federal ammo loaded with the barnes bullets to try in my 300 win mag this year. We'll see how it goes I guess.

[@ReviewThisThing]

It does have a precision style stock option I’d be interested in trying. Let us know how those loads do for you.

[@rickyflinchum2909]

@@ReviewThisThing Good to know. If I can remember to do it I'll let you know how that federal ammo does.

[@ReviewThisThing]

@rickyflinchum2909 👍🏻👍🏻

[@eggbert191]

Titanium shoulder on full display again. Its common to shoot lighter copper bullets for the increased velocity needed for expansion. At least 2000 fps at impact. Ive yet to find any factory copper that shoots well, haven't tried the sako though. Nicely done as always. Cheers

[@ReviewThisThing]

I was very impressed with this setup! Thanks so much, and thank you for watching!

[@Awesymoto]

simple good video!

[@ReviewThisThing]

Thank you! We appreciate you watching!

[@cliffyarboro1163]

Nice rifle and good shooting pretty lady love your videos❤❤

[@ReviewThisThing]

I appreciate it! Thank you for watching!

[@craighamilton3710]

What size scope rings are you using?

[@ReviewThisThing]

I'm pretty sure these are the medium rings. scheels.rockporch.com/prdlink/keC24xuivn

[@kit3cut]

how many grain you shoot whit the Sako Powerhead Blade? Greetings from Germany:)

[@ReviewThisThing]

Hello! Thank you for watching. That on is 162 grain.

[@johnandrosemarywyatt977]

What is the twist rate of the sako?

[@ReviewThisThing]

I’m pretty sure it’s 1:10.

[@johnandrosemarywyatt977]

@ReviewThisThing I did check only because euro guns are typically slower twist. It is actually 1:11. I think most american guns are 1:10. Do you think the slower twist is better for copper bullets? I couldn't believe the results you got with the g20 because I have not had anywhere near that accuracy with Sig copper in my ruger .308. I have been told many times that longer bullets require a faster twist rate, not slower and copper has to be longer because it's lighter than lead.

[@ReviewThisThing]

@johnandrosemarywyatt977 that’s definitely interesting. I’ve heard that same thing - that the faster twist rate would perform better 🤔🤔 Maybe the 24.4” barrel is more of a factor I was blown away by how well it shot. It definitely made we want to shoot the 130gr Barnes out of it, but we haven’t.

[@yalieangami6233]

Aiwaa 😘💕👍👍

[@ReviewThisThing]

👍🏻👍🏻

[@phild9813]

The lighter is better theory has some validity, but it’s also important to consider down range ballistics. The lighter bullets cut through the air more poorly than a heavier, “slippery-er” bullet. For 308, think 130 grain TSX v. 168 grain TTSX. The 130 is going to be screaming but the 168 could catch up to it in velocity. For my hunting needs I believe a 150 is the sweet spot for the 308 in a copper bullet, but everyone has to crunch the numbers and see what will work for them. If only I could get the 150s to shoot well, they are all just OK at 1.25-1.5”.

[@ReviewThisThing]

That's definitely the tricky part! We've had great luck with 150gr lead, but not so much with the copper.

[@sturmstug]

And….you didnt answer the question in topic…bye

[@ReviewThisThing]

Pretty close between the Sako and the Norma.

[@Snailz5]

You got eyes don’t you? You can see which groups are smallest.

[@ReviewThisThing]

😊