Outstanding. Thank you. Same issue, dead display panel. Tested power, good. Tested control board, pump ran. Display even came back up during first test momentarily but went dead again. Thanks!
@JohnHutchison-p2n12 күн бұрын
Great instruction video. Should be able to follow and careful about pitfalls pointed out in the video. thanks
@kylenorsen61693 жыл бұрын
Thank you. I had no power at the board. Wire nut fell off on the power supply. All fixed and $650 saved.
@whitneyc5909 Жыл бұрын
$650 🤦🏾♀️
@steveholden71542 жыл бұрын
Great Information! This fixed mine.The secrete was in diagnosing whether it is circuit board or button panel. Never would have known which without you. Thanks so much.
@sweetdees869 ай бұрын
Thank you for this video! My whirlpool ended up having a charred wire nut. I had no power at the control panel or board. Traced the power down to the bottom aluminum pane and viola there it was.
@brucea41852 жыл бұрын
Wow, I am so dizzy I need to go lay down a bit before working on my dishwasher. Good valuable information though. Thanks
@byronmarsales10973 жыл бұрын
In my case, it was the control board that was broken. I believed it was this because I knew the D/W had power and I tried the control board test as shown here and it failed. Thanks for the helpful video!
@07GoldWinger4 жыл бұрын
The control board test statement was fantastic. Thank you for pointing that out.
@JustinHuman12695 ай бұрын
Had this peoblem last week. In my case, the wire from the control panel to the board was loose at the control panel and wouldn't stay in place. I was able to take it off and plug it back in backwards, moving the loose end to the board, where gravity doesn't effect it as much, and it did the trick. I think the one end may have been damaged by people slamming the door shut.
@Doom1461 Жыл бұрын
Thank you for the awesome video! I was able to fix my Whirlpool dishwasher myself following this video!
@rudyardodayao6845 Жыл бұрын
What is the part number for this video for the whirlpool dishwasher
@jeanpuckett3 жыл бұрын
Thanks so much - your information helped me fix my issues. (but the video made me dizzy)
@lavonpegram59697 ай бұрын
Have a blessed day!
@ohemming2 жыл бұрын
Great stuff. Explained the process perfectly and I now have a working dishwasher again. Thanks.
@BeardedApplianceRepair2 жыл бұрын
Glad it helped
@mike646466 ай бұрын
everything works on my whirlpool (very similar to the one in the video) except the "Start" button. New replacement control panel. Any suggestions?
@angelocarrillo26923 жыл бұрын
I have this problem and when I did the board test no pump came on supposedly meaning the board is bad, I replaced the board and still have no power to the panel. Therma fuse shows continuity, and there is power coming from the breaker and no loose wires. Made a bridge to bypass the door switch, still nothing. Suggestions?
@jameskenney56239 ай бұрын
Did you ever figure it out? I know it was 3 years ago but do you remember?
@dvanlinton Жыл бұрын
Ok I have a new home never used this washer. Try to use it for the first time it's no lights.
@03Indie2 жыл бұрын
Where can I purchase the replacement control panel?
@clownindan3 жыл бұрын
I have this exact model but i think it might be the control panel or something else. Ordered the user control without checking it all first and it didn't fix it.
@pauldaubner60902 жыл бұрын
Would a broken door latch cause a dead "no lights" touchpad? I have a 2018 Whirlpool Model WDTA50SAHV0
@DigitalArchmage11 ай бұрын
Weird: I tried the test, and I didn't hear the pump, so I replaced the circuit board with a part from a local walk-in appliance parts warehouse. My dishwasher now works, but on a whim I re-tried the test (insert power plug in with door open, wait 10s, close door) and didn't hear the pump with the working board. The new board was $111 and they said it was 3rd party, despite it looking identical (plastic molding, color, everything). Even though I got the fix i needed, I'm dubious about the test. Either I didn't get lucky and the old circuit board was diagnosed correctly with this method, or neither board does the test and I got lucky. Either way, I know this board won't do the pump test, and I can't use this method in the future (in my situation).
@DigitalArchmage11 ай бұрын
@BeardedApplianceRepair Uh oh! (advice welcome!!!) - I just went to check on it (I let it do a cycle as a test). When i opened the door it was steamy. There was a puddle on the bottom. I thought maybe there's something that needed cleaning but then i noticed the control panel was unresponsive (no buttons would turn on the screen again). I'm worried whatever fried the previous board has fried this one now.
@Becky52578 ай бұрын
How did you test it to know its the control panel? Thats not explained in your video.
@JGIR31 Жыл бұрын
This is very complicated to the lay person. I also see comments that people followed all the instructions and it is still not working. Sounds like I should get a repairman because it will save me a LOT of time.
@philipbaio2237 Жыл бұрын
I have a GE dishwasher and the panel does not light up what can I do
@CWaldman3 жыл бұрын
Thank you. I have a Kitchen Aid and didn't hear the pump come on. How do I know if the test you recommended applies to my model?
@BeardedApplianceRepair3 жыл бұрын
I would do it a few times before you give up. You have to get the timing right. You can verify by lookin gat the tech sheet behind the kick plate. The test should be listed somewhere in that mumbo jumbo lol. Also make sure the dishwasher has power.
@CWaldman3 жыл бұрын
@@BeardedApplianceRepair Thank you. I determined my control board was bad. After replacing it, my dishwasher is back to life.
@lillydee59785 ай бұрын
So basically, as with all modern appliances it's a piece of total shit. Mine is 2 yrs old and already this shit is happening! My previous dishwasher from the late 80s had no issue for over 30 yrs and my new Whirlpool is already fk'd up. I don't have the tools to fix this piece of shit.
@fawzibryankairouani95393 жыл бұрын
Where can we buy that board for a good price?
@DanielJRouege Жыл бұрын
What if it's blinking on and off
@annaricadieudonne21233 жыл бұрын
I need one to fix a Whirlpool WDF520PADM7 no light come on
@sonesj623 жыл бұрын
Those screws on the board are 1/4"
@michellemasters3045 Жыл бұрын
Hold the cancel button down for a long time like a minute
@sonesj623 жыл бұрын
I like the hat.
@joshmoulder4529 Жыл бұрын
I need the number please
@webby64channel352 ай бұрын
Cut to the chase
@albanashandro60862 жыл бұрын
Please some body can help.
@okeyokafor27703 жыл бұрын
I didn't see the other video about the how to troubleshoot the same issue with a on a touchscreen dishwasher in the description like you mentioned. Is this it? kzbin.info/www/bejne/q3WypZikabWWd7s If so, it looks like it has the same style of touchpad as the dishwasher in this video.
@BeardedApplianceRepair3 жыл бұрын
Thanks for the comment, Yes that is the one. I am linking the video in the description now. Sorry it was not there for you. Good find!
@ninjawolf2033 жыл бұрын
Go Cowboys
@ForexTraderJohn4 жыл бұрын
Now tell me how to do it in a Samsung Front load washing machine
@firewindwater19292 жыл бұрын
Not a great video. A lot of what you're doing doesn't show up from the camera angle.