Whirlpool Dryer Repair - Will Not Heat - Heating Element

[@MarkDStolte]

excellent walk through. got this swapped out and put back together in an hour. Would have been lost without you, and ending up paying $200 for a tech to swing by. you saved me at least $150

[@JamesAlberding]

This was PERFECT! My wife walked in halfway through and said, "Oh no. Are you going to be able to put that back together?" I told her, probably not! 😆

[@tbatba]

Thank you! I needed to replace a squealing idler wheel, and your video was the very best one at describing the nuances of easily getting the outer body open. With my son helping, we knocked this out in an hour or so. Thank you again!

[@warriortank7887]

Three years later and still helping people. Thank you so much for this video. Saved me a couple hundred bucks.

[@kevinmarkham6669]

Thank you so much! I was able to successfully do this to a 700$ dryer we got for free with minimal cost and now it works. I was only able to do it so perfectly thanks to your very well done and detailed video. Thanks so much🎉

[@jachellasthings8723]

Thank you. I followed your instructions and my dryer now works. Saves me a lot of money 🤑

[@lisastephens1461]

This video saved me hundreds of dollars and was spot on. Thank you! I had a bad heater element.

[@vickipreston5097]

Thank you so much! You explained everything so wonderful! I was able to fix my dryer! I'm 63 years old and I was able to do it. Thank you for helping me!

[@raymondpietramale4771]

Great video. Saved me the cost of a brand new dryer. bought the replacement heating element for $20. Thank you Jason! Keep up the great work.

[@drewmcintyre5054]

This step by step guide was an essential help for me today. Heating element replaced with no issues. Thanks very much 👍

[@longrifle531]

It's a lot easier than it looks! Thank you for the video it was super helpful!!!! Saved me a lot of money!

[@travisl7799]

Great video! Walked right through the heater replacement with no issues.

[@imbaked420420]

Helped me out perfectly. Had to change the belt on mine. At least I think that's it. That was the cheapest part first lol. Great video, keep them coming.

[@texagdan]

This is a superb instructional video and I was able to follow it and figure out the problem, repairing my dryer. Kudos and thanks so much for the great effort!

[@timreed6957]

Awesome. This worked out perfect for us!! Step by step was very well done. My wife is happy now.

[@Adam-m5p5r]

Just did mine only needed to take bottom piece under the door off video still very helpful.

[@jafariharris3582]

Perfectly Done... Thanks

[@joshuastone1211]

Literally a GREAT VIDEO thank you

[@jamaldaniels9934]

He made more work than needed

[@angelesparza2577]

This was very helpful 🎉 thank you.

[@danielmckenna4703]

I replace the heating element and thermostat but now I am getting an E4 F4 error. I am not sure what happened. Any thoughts?

[@ishowuyfz]

Thank you!!!!!!!!!

[@AgWhatsUp]

I’d like to know what’s causing mine to keep breaking in the first place! I’ve had to replace this several times already in the last 4-5 years or so

[@sydneykoberstein2243]

Are you kidding me you have to do all that for a heating element I’m already ticked after watching this video what happend to taking the front panel off and replacing it so easy!!!!!! Grrrr

[@IceCreamCornDawg]

I'm sure you can bypass the complete disassembly of the entire dryer, that seems like overkill if you ask me. What I did was just remove the front cover, those 2 screws holding the bracket, the one screw on the side holding the heating element, disconnected the 2 power connectors and the heating element slid right out

[@anthonymartin916]

I'm thinking the same thing, but ehrn o realized he much money I saved. I'm like what the hell.

[@jbshome1810]

Thanks works good

[@ericrogers97]

did anyone have to replace any other parts or was it just the heating element with yours?

[@dylanbrusstar6646]

Is there a nut that goes on in the center of the white fan? 3:00

[@ryanfromme5452]

Yes!

[@kaisondavis6579]

So your telling me I can’t just take the 9 bolts out of the back panel and simply change it right there, I think I’ll do that😭

[@jamaldaniels9934]

U can do it from the front

[@jermainewright3328]

Thought the same smh I’m here now trying to fix mine lol had to do it this way too forever and guess what?! Still cold