Whirlpool Range / Oven - Diagnostics & Error Codes & Troubleshooting

[@aleciap6040]

After watching multiple videos in the last month of trying to get my oven door to unlock for my whirlpool accubake older modeled range. Your video helped me unlock the oven by clearing the error code! I wanted to tell you thanks because I am a single disabled parent money is tight and I can’t afford to hire people to fix the things in our home. I depend on watching these KZbin videos for the knowledge to accurately fix things. Yours was the only one that fixed my oven lock problem. Thank you so very much for making your videos and I am now a subscriber so that I may learn more useful information I may need eventually.

[@debobrown4774]

You saved my oven thank you !!

[@faridahmadi2038]

Thank you for valuable information

[@LucianScorpio]

Greetings Jason, my display isn't lighting up. It was quick flashing a code for several days then it just went blank. I've been unable to use my oven for months. For the stovetop I can light the burners manually, but the oven needs to be accessed through the display panel which does not work.

[@neecee7343]

How do I turn off the preheat feature so my oven can heat to the desired temperature? If you are still available for it doesn’t look like you respond except to push your $39.99 a month video help! God bless you and thank you for sharing your kindness to help those you choose.

[@hameedaahmadzai3975]

Thank you sir 👍👍👍👍

[@retroquest3579]

If your gas oven doesn't start and your error code says clear, more often than not, it's the oven ignitor that is the culprit. This is a more universal issue and is not Whirlpool specific. Search instead for how to test and replace a gas stove ignitor. =)

[@lifelinkageMOM]

Please let me know why the light on the control panel dims on the whirlpool range.

[@monarogers1848]

I have F9 showing up. Checked all the wiring and some of the parts attached to the board show they are dead. Do I replace those? It's the oven and burners that are out.

[@GeorgiaMade404]

I have the exact same stove in the video but no error codes. However, the oven is no longer working 😩. This stove is less than a year old…301 days.

[@reeper2481]

I’m having the same exact problem. Just happens to find out today

[@ACEZRWILD1]

i am having the same issue, last time it was the mother board and now having the same issue and warranty has expired. pos stoves in my opinion.

[@user-go5pj4ob1k]

Did you find out what the problem was. I'm having the same issue

[@GeorgiaMade404]

@@user-go5pj4ob1k Motherboard. I had mines replaced under warranty

[@jhunn061]

I have the same problem, no error codes. The filaments are good. When bake or broil is pressed, There's voltage across the heaters but it turns off after 1 second. It does not latch. I couldn't find any burnt part or loose solder on the board. Oven light does not work even when bulb is tested good. Any ideas?

[@dnotme4900]

My 2700 dollar Whirlpool oven has Tthe "control lock " panel on. I swipe up and it brings me back to original screen . I have turned the power off, pushed all buttons for 4 seconds and no luck. Lots on here have the same issues and I hate giving Whirlpool more money right after warrenty to fix a problem they know about,. Any suggestions ? ( there should be a recall !!)

[@mariaolvera9807]

How can you fix when the digital screen is not working

[@sampresly405]

Thank you so much that was so helpful you saved me! :)

[@Appliancevideo]

Thanks for your response, we are glad we could help. Our library of over 5,900 videos are currently helping over 1.6 million people like you every MONTH. Please help us by subscribing to our KZbin channel, or post our website www.ApplianceVideo.com to your Facebook page, Twitter, Instagram or any other social media sites. Your support will help us keep producing more free quality videos.

[@BigMarr2Lit]

How can i get my oven to heat up, the gas works fine

[@rkgsd]

I've heard the F3 code can also be a controll board issue.

[@kariciia1]

Hello, i have a whirlpool gas stove model Sf362lxss, how do I fix the beeping sound with the same error code F3E0?

[@wound421oceanic9]

Mine keeps saying lock...how do i get it off?

[@sarlaccbait]

I have error code F2E0 on my whirlpool, is there any way to fix without buying a $200+ part?

[@adrianmunoz823]

My w10200950A stopped heating the oven. The burners still burn but when I go to troubleshoot like you did in the video the temp reads 71 degrees which it is. But when I got to see the codes it says CLR as if to say there’s nothing wrong. What could be the issue?

[@Appliancevideo]

Great question, if you have a more technical question that our parts department cannot answer, you can search our over 17,000 answered questions free at our website www.ApplianceVideo.com under our Repair Help section. You can also call our parts department at 1-800-830-5465 and they can give you help 7-days A week ,or search at www.SaveMoreOnParts.com .

[@resaholmes6182]

Did u figure it out my oven is doing the same thing

[@linglewoman1]

I need help my oven did a spark up the side of oven when trying to turn on to bake. Now the oven will only reach 300 degrees. I checked your site but you have nothing for my stove. It is a Whirlpool M/N WFE770H0FZ2. It is only 4 years old. What can be the problem??

[@bobrich1950]

What does changing the temperature offset do ?? Our oven seems to run about 15-25 degrees high. Is the temp. offset an adjustment for that ?? Thanks.

[@1985230ce]

Yes.

[@CarlosNavarro-m1c]

Room temperature is reading at 41°. Temperature offset is at -20°. Is that bad? How do I change that?

[@CarlosNavarro-m1c]

Oven shuts off after 20mins or so. What is happening 😕

[@joaniedeskins2057]

My new Whirlpool built-in electric single oven preheats fine but when I open the door to check on food, the oven goes back into preheat mode. Help? Thanks in advance.

[@madfzr]

How do u turn the clock brightness down?

[@leishawalker5916]

I have a whirlpool gas oven model # wfg114swq1 My display was showing F3. I replaced my temp sensor, but when I do this diagnostic test. Temp shows 3 --- Please help me figure out what is wrong

[@oscarramirez7381]

Buenas noches fijese que tengo una estufa wrilpool idéntica a la que usted tiene el problema es que en la tarjeta me tira f2 cual seria el problema si aun se puede rescatar para que funcione normal

[@1031_Life]

So um my oven won’t heat up at all. It has NO error codes…. wtf

[@DulceN]

How do I get rid of the F9-6 code on my Maytag Gemini stove? It’s happened only twice in many years, when I boil something for about half hour in a back burner and forget to turn on the overhead extractor, nothing to do with the any of the ovens’ doors. I believe that the steam gets to the control panel, affecting it and producing an error code.

[@Appliancevideo]

Great question, if you have a more technical question that our parts department cannot answer, you can search our over 17,000 answered questions free at our website www.ApplianceVideo.com under our Repair Help section. You can also call our parts department at 1-800-830-5465 and they can give you help 7-days A week ,or search at www.SaveMoreOnParts.com .

[@juniord.joseph2062]

Good day. My oven just like this is not coming on and there are no error codes. Any suggestions?

[@Appliancevideo]

Great question, if you have a more technical question that our parts department cannot answer, you can search our over 17,000 answered questions free at our website www.ApplianceVideo.com under our Repair Help section. You can also call our parts department at 1-800-830-5465 and they can give you help 7-days A week ,or search at www.SaveMoreOnParts.com .

[@dianirisdelgado3956]

Good morning how can I fix my error f3 in my oven

[@jimlelan4906]

On an AMANA AGR5630BDB1 which shows CLr for error codes, but oven and broil SPARK IGNITER’s will not spark where should I look? All for stove top burners spark igniters work fine. Oven temp probe shows 1080 ohms. Gas control valve shows ~320 ohms (?) on bake and broil circuits. Please HELP?

[@Appliancevideo]

Great question, if you have a more technical question that our parts department cannot answer, you can search our over 17,000 answered questions free at our website www.ApplianceVideo.com under our Repair Help section. You can also call our parts department at 1-800-830-5465 and they can give you help 7-days A week ,or search at www.SaveMoreOnParts.com .

[@andrewbergholtz40]

Anyone know how to change the temperature offset? Mine is saying 30 degrees which I assume is reason my oven calibration is off. I set for 375 and oven thermometer reads 345.

[@johnnyarroyo8812]

My oven is in an unlock clean mode and won’t do anything else. What am I missing, tryed just about everything

[@jcpilon53]

hOW DO YOU CHANGE THE TEMPERATURE OFFSET, MINE IS OFF BY 45 DEGREES

[@1985230ce]

It should be in the manual. They call it calibration.

[@matube2894]

My whirlpool gas rang is giving me an error F3 code, would you please tell me how can fix it. Thanks

[@Appliancevideo]

Great question, if you have a more technical question that our parts department cannot answer, you can search our over 17,000 answered questions free at our website www.ApplianceVideo.com under our Repair Help section. You can also call our parts department at 1-800-830-5465 and they can give you help 7-days A week ,or search at www.SaveMoreOnParts.com .

[@ACEZRWILD1]

@@Appliancevideo it would be easier to tell us the solution instead of redirecting us to search many videos.

[@Fatinha41]

Boa noite toop

[@kreayeager4169]

Nope! Wrong , I pressed start to clear the fd6 code after I unplugged and plugged back ... will not clear?

[@darrenjames7901]

I have no codes but the damn thing wouldn't stop ticking, what do I do?

[@kez141]

Idk what i did but i held the lock and now i cant switch the modes or anything

[@marco1974]

How do I get my beeping sound back. its so faint I don't hear it...I tried calling whirlpool and they were no help;(

[@Appliancevideo]

Great question, if you have a more technical question that our parts department cannot answer, you can search our over 17,000 answered questions free at our website www.ApplianceVideo.com under our Repair Help section. You can also call our parts department at 1-800-830-5465 and they can give you help 7-days A week ,or search at www.SaveMoreOnParts.com .

[@desariegeorge9638]

I jus brought this stove and my oven keeps turning on and off automatically when baking is that supposed to happen

[@cherylrichards6472]

I'm getting the same problem. Did you find out how to fix it?

[@jennif3rgallegos]

Did anyone fix this? Mine is doing the same thing

[@1985230ce]

@@jennif3rgallegos Me too.

[@rithachavannes84]

Why my burners wouldn’t work

[@joannecarolpetrasmithwilso6445]

My menu is not lighting up

[@StitchAndMakeUSA]

My whirlpool gas stove says F2. How do I fix it?

[@Appliancevideo]

Great question, if you have a more technical question that our parts department cannot answer, you can search our over 17,000 answered questions free at our website www.ApplianceVideo.com under our Repair Help section. You can also call our parts department at 1-800-830-5465 and they can give you help 7-days A week ,or search at www.SaveMoreOnParts.com .

[@TRIANGLEDEYE]

My gas range is not going into the diagnostic mode using CANCEL>CANCEL>START

[@rayrivera2541]

so I hit cancel,cancel start.... then gives me LOC... and can't do anything afterwards... what gives???? how do I fix this one?

[@tiffinitytv3]

I’m having the same problem right now

[@rayrivera2541]

@@tiffinitytv3 wish I had an answer for, I guess I pushed the right buttons some how and it's back to normal

[@all-stargamingentertainmen1157]

No error read but it wont heat

[@Vegita771]

My whirlpool is beeping while F2 is on and won't let any buttons work

[@briantruck2284]

My electric whirlpool beeps on f2 at night ! Very annoying

[@Appliancevideo]

Great question, if you have a more technical question that our parts department cannot answer, you can search our over 17,000 answered questions free at our website www.ApplianceVideo.com under our Repair Help section. You can also call our parts department at 1-800-830-5465 and they can give you help 7-days A week ,or search at www.SaveMoreOnParts.com .

[@marystacy9001]

I tried to clear an error but in doing so I locked the oven door, how do I unlock the door?

[@Appliancevideo]

Great question, if you have a more technical question that our parts department cannot answer, you can search our over 17,000 answered questions free at our website www.ApplianceVideo.com under our Repair Help section. You can also call our parts department at 1-800-830-5465 and they can give you help 7-days A week ,or search at www.SaveMoreOnParts.com .

[@qwonstv1]

Doesn’t work it pops back up in seconds F1

[@Appliancevideo]

Great question, if you have a more technical question that our parts department cannot answer, you can search our over 17,000 answered questions free at our website www.ApplianceVideo.com under our Repair Help section. You can also call our parts department at 1-800-830-5465 and they can give you help 7-days A week ,or search at www.SaveMoreOnParts.com .

[@bennguyen2923]

Can you teach me how I fixes my stove whirlpool F2E0 please thanks!

[@Appliancevideo]

Great question, if you have a more technical question that our parts department cannot answer, you can search our over 17,000 answered questions free at our website www.ApplianceVideo.com under our Repair Help section. You can also call our parts department at 1-800-830-5465 and they can give you help 7-days A week ,or search at www.SaveMoreOnParts.com .

[@SeymourKitty]

Wake up Jason!

[@wyomikey65]

I have a Kenmore 790 series oven/range. I can't get into diagnostic mode. Doesn't not have a Cancel button. I can't find anything for Kenmore

[@soniagreaves5777]

+