Why does my chain keep spinning at idle? How to fix it and how it works. 🤔

[@bryanjohnson1628]

PROBLEM: Brand new STIHL chainsaw. As soon as I unlock break that @%#%% goes balls to the wall full acceleration! I haven't even engaged the throttle!

[@ZombieDaveAZ]

Bryan, I would have been more than happy to help you with this problem but unfortunately you second comment came in and I was not at all amused. So now you can put your hat in your hand see if someone else will help you because I won't. Don't be a Dick. Nobody likes a Dick.

[@bryanjohnson1628]

@@ZombieDaveAZ This is what they mean when they says Man Baby. Buddy, in all seriousness, grow up.

[@stickwallfarm]

@@ZombieDaveAZ Can't believe this guy has the nerve to critique the video then ask for help 😂

[@bexrexer]

Ho. Ly. Crap! I have been chasing this problem down for about a week!! I have wasted so much time watching other people’s videos! YOURS is the only thing that fixed the problem. You da man!! Thank you thank you!!

[@ZombieDaveAZ]

I appreciate you taking the time to leave a comment brother. Glad it helped you.

[@thomasgronek6469]

Many thanks, I am quite flattered. Thanks also for the great presentation

[@cbdyna]

Thanks for the video. Recently replaced purge pump on a CS-400 that idled fine until the air filter cover was put on. Left turned the screw up top, but like you say, the low and high screws must need to be adjusted on my saw for whatever the reason. Maybe a new carb is needed, but maybe I should mess with the low and high. I know I havent touched either since purchasing 15 years ago. Must be set on factory still.

[@ZombieDaveAZ]

@cbdyna Good morning. My video is like many others in respect that it points out solutions to a problem that is specific. Please diagnose your problem before carb adjustment. I E: fuel filter is free and clear. No breaks in the fuel line. New purge bulb lines are not backwards, fuel screen in carb is not clogged etc. If your saw was running well before you made any changes double check the easy stuff first. That's what I would do. Good luck my friend. 👍

[@horyamriningshen494]

Thanks sir it helped me... Watching you from north east India.

[@carltonwilliams6008]

Thanks that really helped me out chainsaw running perfect now.

[@quilton9349]

That was such a clear explanation and demonstration. Thank you!!! Now to see if I can acheive the same result on my Ryobi chainsaw.

[@ZombieDaveAZ]

I believe in you Mr Q. Good luck! 👍🍺

[@lakereed5767]

Thank you so much for sharing your knowledge with us! It has been a great help!!

[@philaouhhh]

great explanation! thank you it's exactly what i needed :)

[@rehoboth_farm]

Thanks. My CS 490 just started doing this and I was worried that I was going to have to replace the clutch or something. I'll try this and see if it fixes the problem.

[@ZombieDaveAZ]

Echo is not famous for their clutch life longevity. Don't rule it out. I have another video that shows that. Let me know if you need the link to that👍.

[@Tuffjobs]

Excellent, thanks!

[@lesteroliveintheshop9825]

Good little saws.

[@HomeGaragechannel]

Very well explained

[@ZombieDaveAZ]

Thank you brother.

[@petaryovev2477]

Thank you !

[@davessmallenginerevival2847]

😁 great explanation

[@ZombieDaveAZ]

Thanks buddy. Happy Friday.

[@bouldernelsonbigfoot]

Drum & Idle screw ,Lord man .

[@savageclown-pe8cz]

What size is this chainsaw I got this one can't find any markings

[@ElChupa_Cabra]

Can you make the H and L adjust video please my chainsaw chain won't stop spinning even with the the top screw all the way out. It used to not stay running and I turned the L out and now it stays running with chain going super fast

[@ZombieDaveAZ]

It will be up in less than 24 hours. Thanks.

[@ElChupa_Cabra]

@@ZombieDaveAZ awesome thank you! ❤️

[@ZombieDaveAZ]

@@ElChupa_Cabra the video is up.

[@ElChupa_Cabra]

@@ZombieDaveAZ that was fast!!! Thank you!!!!!!!!!!

[@bryanjohnson1628]

HOW TO: This is the formula for troubleshooting videos. 1. Tell me what the issue is in under 1 minute. 2. Tell me what I need to do to resolve in under 1 minute 3. Explain the Issue in 2 - 3 minutes 4. Walk me through the steps on how to resolve. Stay on point....step 1, step 2, step 3....

[@ZombieDaveAZ]

Bryan, this isn't that type of channel. Thanks for the insight tho. I love all the content you produce using your formula tho. Oh wait, nevermind. 😂🤣😂🤣