Why is it not Patented ? Insert a Compact Disc into the Angle Grinder and be Amazed !

Why is it not Patented ? Insert a Compact Disc into the Angle Grinder and be Amazed !
🔴WARNING!!!This video was created for experimental purposes and is not suitable for permanent use!
Few people know that it can be done from a plastic bottle and a DVD disc - Very simple - • Video
Glad to see you on my video - Every video is creative hacks that help people in everyday life!
See, rejoice and develop all this just for you!
More of my videos here: www.youtube.com/@CreativeHack...
How to repair a light bulb, how to tie a knot, how to make your life easier, how to open a lock, how to quickly repair anything, subscribe and be creative!
#CompactDisc #AngleGrinder #DIY #lifehack #creativehacker

[@josephpk4878]

From someone who's spent thousands of hours using a mini grinder - when using sanding disks, they're generally backed by a mesh reinforced rubber disk with a leather or velcro surface to glue or velcro the sanding disk to. If you blow a sanding disk or pad at 13000rpm, it will flake some pieces off and give you plenty of time to stop the grinder and change the disks. At 13000, a compact disk will send glasslike shards all over the place and if someone's in the path, they're going to get hurt, or killed. This is one of the stupidest suggestions I've ever seen on YT. DO NOT attach anything to an angle grinder that wasn't specifically designed to be there. Seriously ppl... common sense will keep you alive and in one piece.

[@jimbo3615]

So, is this why it’s not patented? :-). Lol, this is one of the dumbest ideas I’ve seen!

[@Ezekiel903]

what do will he do when he need a new sandpaper? using another CD?? not classified and tested devices! unsafe and not even cheap if you need always a new CD!

[@MrGamman3yt]

It's not common, that's the problem.

[@davetheknave666]

if one pays attention, the video tells you what your can n can't do safely.

[@keithcastleberry3993]

My exact thoughts. A CD will disintegrate at that rpm. Don't find out the hard way people. A trip to the ER with 1/3 of a CD embedded in your face is not a good day

[@ivangrishin6329]

This video is the perfect example why the dislike counter should be visible.

[@Jaymz007]

One of the dumbest things KZbin did was getting rid of the dislike count. It used to save loads of time, especially when looking for a "how to" video.

[@chomp7927]

15k dislike to 3.3k likes. You can turn it back on with an add on lol, and yes this is a perfect example of a crap idea getting ratio'd lol

[@jothain]

Absolutely. Foolish to give this kind of ideas to people, which can and will result in damage.

[@internautelibre]

I agree, it's very, very dangerous

[@luless666]

@@chomp7927 for me it shows 18k to 3.5k, only 1 day later...

[@puzzling7785]

This video should be called: "How To Lose An Eye In Under 2 Seconds."

[@jerrykalbaugh2899]

God damn right, why would any one resort to this method

[@Ashworth-Media]

A simple paper disc can cut things when spinning fast enough. When you are using any rotary machines like an angle grinder You also need to ensure that you fit the guard to it. this way you will have the same number of fingers at the end that you started with.

[@richardsalinetrojr1957]

That's funny. I took all the guards off of every single grinder I've ever owned and still have all my fingers after 25yrs of using grinders. if you know how to use your tools properly, you don't need the guards in place. besides that the guards limit how deep you can cut into things. sometimes you can't get different angles on what your cutting so guards just get in the way. use your tools properly and use proper safety gear and you shouldn't have to worry. yes, I've had disk blow apart but again, if your wearing proper safety gear no harm will come to you.

[@Ashworth-Media]

@@richardsalinetrojr1957 I hope that you have never used tools in this way commercially. The HSE would have a field day with you and instantly issue a probation notice to stop and if they found you doing again fine you, at worst you could end up in prison.

[@lacey86]

​@richardsalinetrojr1957 ridiculous comment. Nothing to do with using them properly. It's to prevent accidents.

[@richardsalinetrojr1957]

@@lacey86 ask me if I give a f**k. 🤣🤣🤣

[@lacey86]

@@richardsalinetrojr1957 your retort doesn't make sense. Give a f#@k about what?

[@BritishBeachcomber]

A CD spinning at 12,000 RPM is dangerously scary. *No way should anyone try this*

[@adrianTNT]

I heard of CDs breaking apart in the player, and inside the grinder it is way easier to break that plastic and make it go weee in all directions. WHAT is wrong with people ?! 🤦🏼‍♂

[@bobbytables4305]

came here just to say this...

[@Henry-sv3wv]

now point a laser to it ---> high speed data access XD

[@LukeFrench01]

like the others have said - I came here just to say this. Also, this video should be taken down on safety grounds.

[@flavorwaster]

C D's nuts!

[@juanbarranco6977]

In case of broken, only a small piece of the disc with the high speed, can damage not only you, also a person close to you. It is like a knife. Normal disc has a internal net that cover the full disc in order to not throw pieces.

[@StanCollins217]

Showing this use of a CD is 1. worthless because there are perfectly acceptable discs made to this purpose & 2. extremely dangerous. A small crack in the CD is all it takes to cause it to shatter and slice you. Yes, that can also happen with laminated grinding discs but they are much stronger and laminated to provide strength at the RPM's that your grinder is turning. DO NOT TRY THIS STUPID SUGGESTION

[@juanbarranco6977]

@@StanCollins217 Hello. I don’t know if you are answering me or to the person who has made the video. Thanks.

[@A2an]

​@@StanCollins217 furthermore the disk is tighten in the center which will lead it to crack and especially when it's bending. Usage of a disc in this manner is stupid on a higher level.

[@benjamindemontgomery6317]

this is up there with taipods. this hack is literally life threatening. i had a disk blowing up in my cd writer. I had to replace most of my computer. shrapnel everywhere,

[@alloutofdonuts3998]

In Russia we call these suicide disc.

[@nothingmuch2023]

One of my best friends spent Christmas in the hospital four years ago, due to an accident with an angle grinder with actual discs made for the job. Even those splinter, as his did, and in this case one of the shards tore through his femoral artery. Nine units of blood and plasma, an airlift to the hospital, a ton of good luck and the fighting spirit of a lunatic, as well as his steel physique since he's been in world class in martial arts decades ago all coincided to help him survive. Multiple surgeries and being declared a medical miracle, both he and I are VERY CAREFUL whenever using angle grinders these days. This video is horrendously irresponsible. I'd highly suggest the creators of it take it down immediately, because there ARE a lot of beginner DIYers out there who don't fully understand how shockingly quick and violent accidents occur. I write this with my left thumb in a bandage after once such incident with the mitre saw two days ago, so it happens even to those of us with more sense than the creators of this video. Please do not modify power tools. They are dangerous enough as they were first created! My friend survived, though they had to take pieces of his left leg to piece together the ground meat that was left of his injured inner thigh. He's got a scar clear up to his chest, and will not be 100% again, though he does just fine at 95%. He was incredibly lucky. Others might not be.

[@1r3k1970]

Super patent na pozbycie się gałek ocznych i ozdobienie sobie twarzy kawałkami płyty.

[@alchemik2010]

Ten the bill mieć sądowny zakaz publikacji swoich wysrywów w internecie.

[@jamsaanich4993]

For added safety I suggest you keep a bowl of gasoline close by, especially when sanding metal as this will allow you to cool down any surfaces that get too hot thereby preventing a potential fire.

[@massimobernardo-]

with 380 volts it will run faster.

[@frakvadrine8046]

😂😂😂

[@puppetregulator18]

Also for safety, wear wet socks and hold exposed wires as your plugging them into a live socket, pro safety hack!

[@commodoor6549]

Does the bowl of gasoline have to be boiled before we cool it in the fridge?

[@jjs3863]

Each dislike should negate a like

[@alexblack6762]

DANGER! DO'T DO IT! The CD has no fibers which would hold pieces if disc disintegrates. If disc cracks then large pieces will fly around at high speed and may seriously injure or kill somebody.

[@merykjenkins3274]

Did you use the report function to report this as 'dangerous or unsafe acts'? The more that report these types of videos, the faster they will be pulled down to prevent children from hurting themselves.

[@Nord72]

Dont use the flex without the cover.

[@Nord72]

@@merykjenkins3274 : This video is made I think for adults whois at least have a brain and capable of counting from 1 to 10. Dont make a hustle...

[@garywagstaff7142]

Not “if” but WHEN the disc breaks.

[@michaelangelo8001]

Bwahaha..! It could "kill" someone??? Yes it's a stupid idea, but you ignorant safety freaks are much more dangerous.

[@causewaykayak]

Its perfectly safe and the gasoline suggestion is brilliant. People should be free to experiment and the rest of us who do fabrication for a living should try not to laugh too loudly when we hear the screams.

[@CreativeHacker7]

Let's keep the experimentation going! Safety first, but creativity knows no bounds 🤯👍.

[@eoghanlenihan2384]

Best case of natural selection I've ever seen

[@jamesfox8930]

there's a reason why grinding wheels are rated for rpms. when you use something not rated for the rpms it'll basically explode and shoot the pieces everywhere. if you've ever had this happen you learn the lesson real quick. also, an orbital sandal or palm sander would've done the same thing and there would be more surface area on the sander for sanding the project more evenly. honestly, this looks like it's asking for trouble imo.

[@effortlessweb9816]

Sort of true (mainly true). Cut off disks (which of course are rated) commonly explode. They are tough, but at 1mm thick, they don't have a lot of strength. So cutting things in weird angles, or if something moves and pinches the disk, or if you accidently twist, it goes bad. Even with a face shield, the chunks (which are small, not potentially large, spinning chunks of death) hurt a lot when they hit your chest and neck. This video should have made it clear that disks DO explode, and that this CD WILL explode, and without safety gear, it can (and probably will) cause serious injury. Sure, the disk was being used as a grinding disk (not a cut off disk), but that makes it even worse because grinding disks are really tough. They are thick and designed for sanding and grinding. Dumb idea, shown in the dumbest way.

[@elppedro77]

Using the plastic disc (CD) is not safe, it was never designed to be used like this and will shatter with possibly catastrophic results! You could lose an eye, especially since you took the guard off it!

[@CreativeHacker7]

That's why I showed in the video that protection is necessary !

[@dannyh773]

My brother died from a grinder wheel shattering. This is not a good idea. Those disc are not made for that. When any disc shatters. It can have results more devastating. Then the price of proper equipment.

[@alfinpogform4774]

Going back forty years now, but a man building a house up the road from my parents took the the guard off his grinder to fit an over size cut-off wheel. It shattered, a piece flew into his neck and severed his jugular vein - it was said he was probably dead before he hit the ground. I doubt many people copying this CD method would be wearing neck protection.

[@jamescraig8601]

Why do something this insanely foolish? Buy the proper tools and be safe. But then again maybe tide pod eaters will try this!

[@HomeImProveMentHow]

Wearing gloves and eye protection would be important, *And Or A Face shield,* And a Good pair of leather work gloves. I would want to blue too Glue 2 disk together before putting on the sandpaper. Thanks for sharing and for your concern

[@betonagrida4618]

This guy is playing with fire! Insane!

[@billgeorge7804]

After retiring as an engineer after fifty years I genuinely thought that I’d seen every outright boneheaded dangerous thing that someone could do or try. Guess I was wrong . . . BTW do NOT try this, unless you like the idea of some time in A&E

[@paulmurrell3719]

I had to laugh in horror when he said "do not forget about safety" with no guard on the grinder, while using a disc not designed to go on it (which will shatter very easily). Very dangerous stuff.

[@JeffPopek]

On top of that, he attached the secrement ring upside down on the cd.

[@XenFPV]

But he's wearing gardening gloves and dollar store sunglasses. What could possibly go wrong?

[@davidmcd8400]

It’s a 5” cd. It won’t fit with the guard on

[@tamasdohy1146]

The glue costed more than just simply buying a sandpaper disc

[@SMAAAASHTV]

@@robira1313 he's clearly a non-native english speaker.

[@maxscott3349]

Does absolutely nothing anyway. The nut will hold the pad on just fine

[@MustangBoss1973]

To sum it up, only a fool would do this. this deserves a Darwin award.

[@osbert]

Great news! Thanks to your experiment we finally have a use for DJ Khaled's back catalogue.

[@wh0tube]

Two more things NOT to do with an angle grinder! Next episode using an angle grinder as an electric toothbrush.

[@joesee8079]

😂

[@merykjenkins3274]

Did you use the report function to report this as 'dangerous or unsafe acts'? The more that report these types of videos, the faster they will be pulled down to prevent children from hurting themselves.

[@potrzebieneuman4702]

:)~~~~~~

[@V3ntilator]

@@merykjenkins3274 Yeah. This video should be illegal, because there is sadly people who wanna save 10 bucks for a real safe disc.

[@3dChris]

@@merykjenkins3274 pretty sure children have no idea what cd’s are.

[@intheshell35ify]

I had no idea making razor sharp shrapnel was so easy.

[@merykjenkins3274]

Did you use the report function to report this as 'dangerous or unsafe acts'? The more that report these types of videos, the faster they will be pulled down to prevent children from hurting themselves.

[@intheshell35ify]

@@merykjenkins3274 oh man for a second I thought you were Marty the party Jenkins. That would have been cool. I mean, you ok, just that he would have been better. As for your comment, agreed, done.

[@quellenathanar]

Some kid is gonna get into his dad's tools. The disk will disintegrate and send sharp shards flying at 11,000 RPM.

[@CreativeHacker7]

Safety first! Always use caution when experimenting with tools and machinery like an angle grinder. 🔧👨‍🔧

[@EwanP-rl3ff]

​@@CreativeHacker7You used absolutely zero caution

[@GunniiBikertech]

Du kannst dir auch einen Schlitz in die Kniescheibe machen und da eine Feile einwachsen lassen. Dann hast du die Hände immer frei beim Arbeiten. Guter TRICK !! ECHT !!!

[@robinmeade7573]

There was a reason why back in the day, speed of CD Drives maxed out at like x52. It was because they shattered into hundreds of pieces inside them from centrifugal force. That is a reason, why he is "cutting" Styrofoam and basically gently stroking that piece of steel.... because it's DANGEROUS!!!

[@smokeydiamond489]

And there are all kinds of grinding and cutting and sanding and polishing discs out there! But hey he must be russian. Can tell by the cheap ass angle grinder.

[@joecummings1260]

When I was in school they used to show us safety films narrated by a guy with an eye patch about people like you

[@INOMORETHNU]

Awesome, tyvm

[@melintafro7363]

There is a reason why nobody has patented this, but i'm pretty shure that there are a lot of people who landed in ER with this idea! Just think about what you are turning with that speed under pressure. Good luck!

[@merykjenkins3274]

Did you use the report function to report this as 'dangerous or unsafe acts'? The more that report these types of videos, the faster they will be pulled down to prevent children from hurting themselves.

[@Rawd123]

@@merykjenkins3274 Thanks. Done.

[@coreynash8399]

You owe me back 3:38 minutes of my life

[@atlasiroh5095]

Masterclass in suspense 👏

[@atlasiroh5095]

Had me audibly gasping at the end as i moved my face away from the screen, tangibly worried about getting shrapnel through the screen😂

[@dude157]

In next week's episode of "It works until it doesn't" a parachute fabricated from your old bedsheets.

[@flugschulerfluglehrer7139]

This is extremely dangerous. If the CD shatters - and eventually it will shatter - everything comes flying in your face!

[@merykjenkins3274]

Did you use the report function to report this as 'dangerous or unsafe acts'? The more that report these types of videos, the faster they will be pulled down to prevent children from hurting themselves.

[@Jeralddoerr]

Well! That's what his safety glasses are for!!!! 🤣🤣🤣🤣🤣🤣🤣

[@flugschulerfluglehrer7139]

@@merykjenkins3274 Yes I did. But the people who are responsible seem to ignore the fact that a angle grinder spins at 20.000 rpm. Safety glasses are useless, when a piece of plastic at hundreds of miles per hour penetrate your brain.

[@CapitanFantasma1776]

Thanks!

[@nilsbottjer7129]

This is what the darwin award was invented for

[@josephguerrero1351]

Are you going to make a follow up video about the dangers of using thin sharp plastic?

[@CreativeHacker7]

The video was shot for experimental purposes, and in the video I show that it is necessary to protect yourself before use !

[@Lggaley]

@@CreativeHacker7 Then why did you make it? Fragmented shards of plastic sounds like an ER run to me. Again, not to be a negative Nellie, but you really need to rethink the possibly of injury and take this one down.

[@ss67camaronut]

@@Lggaley I agree 10,000 %. It wont be him that gets hurt though. Some inexperienced weekender or total noob will think this is a smart " hack" and have it blow up in their face or eyes . This isnt clever or funny at all. I'm not usually one to comment on the dangers of this type of " fictional experiment" it is after the fact labeled. I just had a PC of a grinding wheel dug out of my eye a year and a half ago and still have vision issues AND was wearing safety glasses and all guards were In place. This is just irresponsible. Should be taken down! No concern no conscience, no brains . Thinks hes cute and is a joke . Clicks. F- that shite. Total dic move. Trump like--- thinks hes the smartest in the room and is literally the stupidest sorry, but damn-- just wow.

[@rickc2222]

@@Lggaley agreed this is super dangerous.

[@embobineuse1]

and normal gloves protect nothing, when a disc explodes. This was my only work accident in my life and it smashed my finger even with good gloves. My finger was open upside at 3 cm, my fingernail has broken into two pieces and the top of my finger exploded by force of impact. A CD has no reinforcing at all.

[@xsardas1999]

Don't forget about safety! Proceed to use unbalanced disk on angle grinder without a guard while wearing sunglases XD

[@toml802]

One day, I hope to make a sanding disc somehow more expensive.

[@apelfed]

“F*ck around and find out” as they say. Won’t be long using this till you find out just how good your safety glasses are. Good luck

[@DWilliams-sf5th]

Don't glue sand paper to it. Unevenly distributed glue will can cause off balance spinning and the disc to explode in multiple direction at a high velocity.

[@marktee5086]

dont worry he had SUNGLASSES on lols 🤣

[@dushk0]

That said, some cheapo value brand CD-Rs themselves are badly balanced from factory - ok to use for a backup written once and maybe read once again sometime in the future (while limiting the sped of the drive in software) - some might see those as the perfect candidate for crap like this - don't! Rather burn a low-res copy of the Darwin Awards movie for future reference (stupid ideas like this, wink wink) on one of them and use the rest of the "cake" as coasters, that's what they are really good for.

[@merykjenkins3274]

Did you use the report function to report this as 'dangerous or unsafe acts'? The more that report these types of videos, the faster they will be pulled down to prevent children from hurting themselves.

[@jessihawkins9116]

@@merykjenkins3274 children don’t use angle grinders

[@smokeydiamond489]

& glues don't stick to plastic stuff very good. But he is russian. Look at no name cheap ass angle grinder. That chit aint no Milwaukee or DeWalt or anything good like that.

[@Jaba207]

I know why it's not patented! Because it's stupid in so many ways. Besides being dangerous, there are easier and cheaper ways to do the same thing.

[@CreativeHacker7]

it's done as part of an experiment, I'm not saying it should be repeated

[@matthewcarroll2215]

​@@CreativeHacker7 should put a notice saying not responsible if you try this !

[@j.h.4570]

@@CreativeHacker7 Showing it to the public kinda makes it seem being either a recommendation or advice of yours, doesn't it? Usually it's a "I show you something to learn from me" principle being implied.

[@davidgilbert6]

@@CreativeHacker7 Being an "experiment" doesn't negate how incredibly stupid it was, and how even more stupid it was to make a video out of it with a title implying that it wasn't incredibly stupid.

[@michelguevara151]

@@CreativeHacker7 an experiment to prove just how stupid this channel is?

[@davidneal697]

Nice 👍🏻 if only they sold sanding discs for a grinder 🤦

[@tootall627]

Good way to put yourself into the forever box

[@gretschcorvette73]

"Don't Forget About Safety" - Continues with no guard on the grinder.

[@flitemode2177]

or -- continues inserting A FKN CD INTO A FKN GRINDER. FFS.

[@smokeydiamond489]

Russians dont need no guards

[@HHHGeorge]

Most angle grinders have guards to prevent any debris from the grinding disc flying off into your face. It is usually integrated into the design of the angle grinder. The guard prevents you from using a larger disc for which the grinder was designed. Are you suggesting removing/modifying the guard on the angle grinder? I think it would be safer and wiser to buy a larger grinder.

[@philippetays4263]

dont know when the last time was that i seen any grinder with a shield on

[@CreativeHacker7]

I do not suggest removing the protection, I simply did not have it, and of course I show that safety rules are necessary even in the video itself !

[@ss67camaronut]

I let the guards intact on my small 4 and 4 1/2" grinders. I have had blades explode ....last one cut through my shirt pocket and tee shirt under that and put one heck of a bruise and scuff mark on my teet. Dreaded the carnage possible had it hit my face !!! Was a new cutting wheel so I assumed defect. Am Leary now with the wheels remaining in the package. But let the guards in place guys . There's nothing to be gained . Doesn't improve clearance as guards are repositional hate when they're gone. Fingers grooved nearly every time

[@tuffy16]

Tuffy 1 9 minutes ago (edited) I USE A NINE INCH SANDING DISK ON A FIVE INCH GRINDER WAY WAY BETTER THAN A NKMAL 1\4 X6" GRINDER WHEEL, CLEAN OFF SPATER WHEN WELDING PIPE. SHINY. TO MAKE A GRINDER USEFUL : 1 THROW AWAY ALL GUARDS 2: MAKE SURE IT HAS A TRIGGER LOCK 3: MAKE SURE TO USE AT LEAST A 6 INCH DISK ON IT. ONLY THEN IS IT ACTUALLY A SURGICAL, DEADY

[@tuffy16]

YOU DONT WANT TO DRAG A 9" GRINDER AROUND ALL DAY, YOU WANT A LIGHT POWERFULL KILLER UNIT. LIKE A 5" MAKITA WITH 6" X 1/8" DISK AND IT DOES BITE, YOU HAVE TO KNOW WHAT YOU ARE HOLDING ON TO

[@user-mj2pu7lo5l]

Finally, a tool for cutting styrofoam

[@dixmagoo6732]

Very cool!

[@Evan_Hands]

As a red seal, level B pipe welder, with a decade of experience, I will say this once "DO NOT DO THIS." It is is an extremely stupid idea. Those CD shards at high speeds WILL hurt you. MY father had a broken CD fall and cut into his forehead and this was not moving at 5,000 to 10,000 RPM. It was literally sticking out of his head like a bloody unicorn and it only fell from the top shelf. I have removed a metal sliver embedded in my eyeball with tweezers that I had gotten WHILE wearing safety glasses. You don't want to go for surgery just to get a CD shard out of your leg or eyeball because you were a dumbass for the weekend. Go find a better life hack NOW. This video is a perfect example why the dislike counter should be visible. Sometimes enough dislikes can save a life, just at a first glance.

[@merykjenkins3274]

Did you use the report function to report this as 'dangerous or unsafe acts'? The more that report these types of videos, the faster they will be pulled down to prevent children from hurting themselves.

[@shithead]

@@merykjenkins3274 I want youtube to burn so I like videos like this

[@Evan_Hands]

@@merykjenkins3274 Yes, I did. Still surprised this is up. If there was ever a reason to report a video, this would be it.

[@mariocooldude9092]

​@@Evan_Hands how did a CD penetrate your Fathers skull 💀???

[@Sola-Scriptura444]

You should take into account ; that when that CD Material will easily shatter under stress, and if while spinning, is similar to a granade.

[@merykjenkins3274]

Did you use the report function to report this as 'dangerous or unsafe acts'? The more that report these types of videos, the faster they will be pulled down to prevent children from hurting themselves.

[@leeoooooooooooo]

Im surprised he took the risk of messing up his perfect soy hands😂

[@charlesbernier9319]

As a musician, this gives me hope. Maybe this will help me sell my CDs? lol

[@gernhartreinholzen3992]

Only upvotes? No dislikes? Must be a great and save way to use my angle grinder! Thanks KZbin!

[@wiralle4039]

How many times has the disc broken? I think there are a lot of more suitable and safer ones out there, that costs the same price as building them yourself.

[@messylaura]

they don't break, they explode into dangerous shards

[@wiralle4039]

@@messylaura You're right, that's exactly what I meant. Separated dangerous fragments that fly uncontrolled and extremely fast in all directions and possibly cause serious injuries.

[@bsanchez3563]

​@@wiralle4039 is it safe if using a handy butler for a kirby vacuum cleaner if someone tries to build a safety sheild for it to make it somehow safe? Or do you know if like out of curiosity would that be a feasable thing to do?

[@wiralle4039]

​@@bsanchez3563Very interesting question. The best thing to do is to ask the manufacturer directly.

[@merykjenkins3274]

Did you use the report function to report this as 'dangerous or unsafe acts'? The more that report these types of videos, the faster they will be pulled down to prevent children from hurting themselves.

[@kenjiwebb1509]

Always, ALWAYS use the correct cutting or backing disc for the job. Anything less is stupidly dangerous and will get you well known at the ER. A metal cutting disc will blow up if you cut stone with it and vice versa.

[@smokeydiamond489]

Only because it doesn't work and when it starts burning u try to press it way too hard. Discs for metal cuts wood just fine for example but it smells bad and burns, but the proper saw blades for cutting wood - now that shit is truly dangerous even tho its for wood.

[@samuelbhagothiparsad3882]

Bruh. Screw the safety gear. You're gonna need hospital insurance.

[@Daltonleach11]

Between the orbital pads and the glue i think it costs more than a cutting wheel.

[@karljones9357]

I really think from a safety perspective that you need to be supervised at all times. Using a plastic disk (cd ) as a sander was an accident waiting to happen. Seriously you may need help.

[@messylaura]

not only that but the mounted it incorrectly in the first place, thin discs use the top grip in reverse so the flats contact not the flange for stones or flexi discs

[@x0xCRUSHERx0x]

MMMM I love the idea of plastic shards embedded into my face and eyes.

[@johnallright6847]

Never take the guard off and never use discs like these that can shatter!

[@smokeydiamond489]

Can't do chit with the guard on, man. That ain't workin'.

[@en2oh]

spinning a polycarbonate CD or DVD at those speeds is a really, really bad idea. They're not made for that speed and will, eventually self destruct throwing shards of polycarbonate everywhere

[@merykjenkins3274]

Did you use the report function to report this as 'dangerous or unsafe acts'? The more that report these types of videos, the faster they will be pulled down to prevent children from hurting themselves.

[@ravenshadowz2343]

When that disc shatters there is going to be pieces flying everyone, super sharp.

[@robertcornelius3514]

Thank you for giving us Covid, and thank you for giving us this wonderful idea.

[@asturian2937]

can't that be done over a normal table? Does it work better assembling it on grass??

[@giuseppepatane9517]

Thank you for this video. This is the best explanation of natural selection ever seen 😂

[@mrtambourineman6107]

Wow!! Mind = Blown !! 😮

[@AllenBrown-xq8in]

Amazed is not the word I'd use.

[@Splash111]

This is a Darwin Award winner ...waiting in the wings.

[@merykjenkins3274]

Did you use the report function to report this as 'dangerous or unsafe acts'? The more that report these types of videos, the faster they will be pulled down to prevent children from hurting themselves.

[@Splash111]

@@merykjenkins3274 yes

[@jarack3256]

Congratulations! You've discovered the new technology of the grinding wheel! You're a gen... Oh... wait.. no... this technology has been around since the 1840's for this version. The old stone version goes so far back we don't even know when their use even began. But, then, I can't imagine why this wouldn't be patented. I'll give you a D+ for creativity here.

[@PLC808]

I agree. Thank you

[@smokeydiamond489]

It earned him millions of views tho, man

[@SamuelWrightSamuraiMarine]

As someone that has seen a CD catastrophically fail in a CD Rom drive, I could only imagine what this "hack" would do. At least he used eye and hand protection... so there is that. I am sure that the next video he will release will be, "How To Eliminate Mice From Your Attic with Propane and a Lighter."

[@smokeydiamond489]

Well, u survived tho.. plus this guy is russian

[@theredstormer8078]

As if all the other safety concerns weren't bad enough, those aren't safety glasses and would probably shatter on impact sending even more shrapnel into your eyes.

[@CreativeHacker7]

These glasses are specially designed for this experiment 😎.

[@alabama4659]

jak płytę rozerwie i dostaniesz kawałkiem to ci przejdzie ochota do zabawy

[@CreativeHacker7]

Dziękuję za twoje komentarze! Dlatego pokazałem w filmie, że ochrona jest konieczna - A film powstał w celach eksperymentalnych, a nie do ciągłego użytkowania

[@robertrix4073]

@@CreativeHacker7 na co Ci kask budowlany? w tym przypadku lepszy motocyklowy XD

[@charliepearce8767]

Give this man a Darwin Award before something happens to him !!

[@salossi]

He'll get the award, AFTER it happened to him... But I am sure, that this will be the case pretty soon...

[@Comm0ut]

Better if he earns his Darwin thus removing another oxygen waster from the planet.

[@cdodge2996]

You only earn one by removing yourself or ability to procreate from existence

[@angeloogden9102]

Same thoughts... Hopefully he hasn't replicated yet.

[@4vladi4]

😂😂😂thanks for the laugh

[@turdferguson5300]

Be careful with those discs. Commercial cutoff wheels sometime break and they hit very hard. If you've ever been hit with one you won't wear anything but a full face shield. Same with a wire brush. You can buy the flapper wheels (sanding discs) that aren't as apt to break. They're a lot cheaper than stitches and less painful.

[@davidrobertson1980]

Hate those wire brush things, not only do they sand skin on fingers and knuckles fast they spit needles of steel into you, face legs arms.... ouch (at least they're not poisonous tho lol) I'm an ex mechanic and metal worker and it still hurts!

[@turdferguson5300]

@@davidrobertson1980 I knew better but that never stopped me before... I wore a loose fitting t-shirt while cleaning an old metal milk container with a wire wheel on a small angle grinder. As you guessed ole stupid was using it on every conceivable angle and I let it catch in my shirt. That was exciting but the shirt and I didn't look the same. We decided that was enough cleaning for one day. I decided to change my shirt and underwear after that. If ya do something enough something crazy can happen, gettin old might add to the chances? lol

[@smudgersplace]

🤕@@turdferguson5300 🤣🤣🤣

[@atomatom6442]

One of the most dangerous tools a contractor could use!

[@Calito1157]

Using a CD that is designed to work at 500rpm in a 10,000rpm angle grinder is stupid, that's why it's not patented!

[@CreativeHacker7]

Thanks for the comments, but I made this video as part of an experiment, not for regular use !

[@Crmson117]

Bravo! I also delight at the pain, suffering and misery of strangers that have done me no wrong.

[@fishconsinlange8901]

you will be amazed at the first law suit

[@robbt9779]

Cutting disks are cheap,why the hell would you need to use this?

[@CreativeHacker7]

it's done as part of an experiment, I'm not saying it should be repeated

[@michaelhough896]

This is utter madness... I stupidly did this many years back when I was young... An attempt to refurbish old CDs using cutting compound... The disk literally exploded... To this day I still think of how stupid it was and how lucky I was to not loose an eye or have part of Metallica ride the lightning lodged in my skull... A true story folks...

[@whatelseison8970]

wtf? you did that with Ride the Lightning? You should have tried Load first or something lol.

[@breeneco]

Theres always at least two ride the lightning cds

[@ashley2108]

This is purely insane! Any one that tries to copy this insanely evil person is taking their lives in their hands.

[@stevec9669]

Wait until the disc breaks and gets into your eyes. Need a patent for that indeed!

[@raypoitras2611]

Imagine that going straight into your eye or across your wrist! 😮

[@merykjenkins3274]

Did you use the report function to report this as 'dangerous or unsafe acts'? The more that report these types of videos, the faster they will be pulled down to prevent children from hurting themselves.

[@smokeydiamond489]

Right, children packing angle grinders. I mean, come on, there are things that u instictively feel ain't right. That cd spinning ain't right, I bet even children get that.

[@felixhernandez9731]

Pensé que cortarías la madera con el CD jajaja

[@justinberry3991]

RIP to your face when that CD flies apart at high rpm

[@speedracerxtreme]

CPSC and OSHA should be monitoring this channel.

[@galewinds7696]

Do you hear the "sounds of music" while cutting with that cd 💿 🤔 👀 😄

[@bryanmcgauhey441]

You sure are going to be upset when that plastic CD breaks and sends a fragment through your face, eye or both.

[@merykjenkins3274]

Did you use the report function to report this as 'dangerous or unsafe acts'? The more that report these types of videos, the faster they will be pulled down to prevent children from hurting themselves.

[@monkfry]

Rookie forgot to use drywall mesh tape to reinforce the 💿 😆

[@davidcook8323]

Nickleback cd's are perfect for this.

[@TheXtroken]

verry dangerous my friend these are things you don't put on KZbin

[@CreativeHacker7]

Thanks for your comments! That's why I showed in the video that protection is necessary - AND the video was made for experimental purposes, not for permanent use

[@artwallace3773]

all the people who complained about safety stuff forgot about the excellent cutting of styrofoam at the beginning!

[@cisco-man8638]

Natural Selection

[@cajohnson1234]

Very dangerous, especially without the guard on it. I’ve seen what happens when a regular disc (in this case, a cutting disc) Grenades. That will go through your face shield!

[@Jeralddoerr]

Well.... Now we know why he never shows us his face.

[@paniot8414]

He`s russian. Let him do that way. Less russians, less troubles around

[@richardschofield2201]

I think everyone watching this knows it's not safe.

[@smokeydiamond489]

Don't know what you're talking about... been working with all kinds of grinders for 15 years, not so much as one minor accident. No guards no shields no nothing. Just googles, gloves and long sleeves for the hot flying particles. Dont know what u guys been cuttin', railroad tracks or somethin'...

[@richardschofield2201]

@@smokeydiamond489 only accidents I've had is when I've dropped the grinder. I do a lot of work on cars and you end up in stupid positions that are hard to hold for long. Dropped with a cutting disc. Disc exploded and the pieces just bounced off me. Didn't really feel them.

[@michaelrtreat]

I know from experience that spinning compact discs at high speeds can result in fragmentation of the disc, especially if disc is not perfectly centered. Be careful!

[@yourecrazy9368]

Just use Metallica or any heavy metal CD

[@davidsharpe6524]

Could you try 'defragging' the disk?

[@robertpangborn9822]

What on earth could POSSIBLY go wrong??

[@johnfrancisco1851]

This guy is nuts

[@martingolding4951]

Notice he can't put any pressure on the disc it will literally explode if he does

[@ashscott6068]

I do something similar to salvage data off old DVDRs. I made an adapter so I can put the DVD in a drill, then i spin it up and use fine abrasive paper to resurface the disc, before giving it another rip with some plastic polish.

[@scottrtomlinson]

Eyeballs have left the chat.