Wife is PISSED I put her to WORK on my Peterbilt 389!

Go to brucewilsonshop.com and get entered to win the MINI EXCAVATOR! SO PUMPED FOR THIS GIVEAWAY!
Be Sure to check out our supporters!
Fitzgerald Peterbilt for all of your BIG RIG needs! fitzgeraldpeterbilt.com/
Performance Diesel INC for all of your Big Rig Power Needs!
pdidiesel.com
FASS Fuel Systems for the cleanest fuel know to man!
fassride.com
Buy Truck Wheels buytruckwheels.com/
ICEBOX PERFORMANCE for all of your cooling needs! radiatorsupplyhouse.com
Be sure to check out TRUX Accessories for all of your chrome and lighting needs!
truxaccessories.com
Renegade Products for your Vehicle Polishing and Detailing needs! www.renegadeproductsusa.com/
Also Shop at www.4statetrucks.com for Big Rig Parts!
NEW MERCH!!
brucewilsonshop.com/shop/
Sunglasses I wear!
glnk.io/n86p/bruce-d-wilson
Use code BRUCE10 at checkout!
Jump boxes
jbtools.sjv.io/brucewilson
Use code BRUCEW10 for $10 off orders that are $200 or more
Looking for equipment? Check out our website!
buyatractor.com
Follow us here!!
SNAPCHAT- bluecollarbruce
INSTAGRAM- bruce_d_wilson
FACEBOOK- BRUCE WILSON
Hit the like button and comment!!!

[@Ogre_1989]

Camera man knows what he's doing

[@ZakHesse]

Definitely being the family along in video! Love watching these videos! You should do some log hauling out of the mountains in SWVA.

[@rodneyrote6261]

Pulled out in front of that car

[@user-kf9fv1qj9u]

Great job helping Bruce Amber

[@kjharris4245]

I like how Gunner is telling Bruce what he did wrong😂

[@melvinalbert6172]

That looks so clean having the electrical connection and air lines hook under trailer

[@lesend5026]

she shouldnt be mad because she is the of the SHOW!!! LOVE ALWAYS!!!

[@dbxek]

Love seeing the fam in the videos. Beautiful truck.

[@davidkelly5459]

The measurement your lovely bride is using is known as a "CUBIT" (an ancient measure of length, approximately equal to the length of a forearm. It was typically about 18 inches or 44 cm, though there was a long cubit of about 21 inches or 52 cm.). That's from the ancient Egyptian's method used when building the pyramids.

[@CraigKutzley-qq5nq]

Hi Bruce.Great looking Truck and the Peterbilt mud flaps finished it .Let's see more of Amber working on your Trucks 😊😊😊

[@user-kf9fv1qj9u]

Great video Bruce and Amber

[@Scovilia]

Love ur vids bruce keep it up!

[@ericgriffin397]

Gunner is growing up fast!! The truck looks good!!

[@jamescampbelljr1166]

Garage floor looks awesome!

[@leonardocustodiodossantos7854]

Family at work! Congratulations!

[@jonathaneriksson-valentin9596]

Bruce just yeeted that lamp at 24:07 😂

[@kevenhiemie]

I don't think anything looks meaner on a heavy truck than mud flaps on the front bumper.

[@briankirby918]

That measuring that's funny as hell. 😁

[@johnetuckerjr6775]

Your wife she did a great job working on that. Love it.😊

[@StevenFranklin-qg1om]

You should look for level racks data for your tools and stuff to be organized

[@Gilman23]

Was great hearing gunner Talk his words about the front flags rubbing when you were explaining to the camera. Gunner know what’s up just can’t put it to words yet. He will make a great driver, worker, tractor puller, mechanic and more in the future

[@CallaBackwoods]

Gunner did a great job explaining what was wrong with the hood. We understood it perfectly!

[@tomtom2438]

Nice to see Bruce supporting the LGBQU2++ community with his rainbow door lights!

[@j76148]

Bruce your little boy is just adorable. 🥰🤣

[@mjsz2842]

Like the blue headache rack

[@lloydrobinson7081]

keep the clips coming

[@toddclark332]

Great job Amber You to Bruce team effort it makes babys😂❤ thanks for the video buddy you all have a great and blessed evening later ❤

[@dogmannz]

You should just extend the chrome guards to cover the rear wheels as well. It would look better also with both sets of wheels covered with guards than just a guard on the front set and nothing over the rear.

[@ridinwithwheelz188]

17:09 where did the hose go? Priceless. 😂

[@scrotiemcboogerballs1981]

Thanks for sharing

[@JrFlexing909]

Could have hang chains off the mud flaps on the chain rack So you don't have to drill holes. But looks good.

[@GulliJ]

From my opinion I've fixed the flag back side of this wonderful chrome bumper, just 2 rivets or 2 screw head, chromed, were visibled, and a small hole or half hole to let the flag pole pass through the upper corner, your flag is perfect when fixed, but my choose let him visible without any of this bad looking piece to hold it. I love your truck ❤ Its a very cool made one and oleasure to see you mod it, more than all from France 🇲🇫 where those teuck are very hot one 🎉❤

[@jesbindavid]

Waiting for your next video ❤

[@ThxtBxyNatx]

Man that truck looks fine 😍🔥

[@darlenemstrommer7687]

Cleaning them is alot of fun

[@chadsmith9979]

Bruce spot where you build your whole day and make a slice and where the holes are when you run over them it will not rip them off but pull them out so it saves your my flat and being tore up

[@Sargen013]

Show some respect to your wife.

[@robertdmoore2592]

Have to agree here, you guys are making content at her expense, I joke with my wife but look at her facial expressions, she looks embarrassed at times.

[@impalabrad4445]

She has an onlyfans page….she’s not embarrassed I guarantee that

[@liamterry5301]

I think your arm measurements were perfectly fine Amber!

[@Blue-moon12]

PT Cruiser Convertible. Next project 😂😂

[@jackasmaryan1776]

Ya! Definitely what Gunner said about the flags is 💯 😂😂

[@ernestbrothers1298]

Yep cover that paint up. Most put flag bracket on outside edge or behind on steer plate of bumper. Go to straight the flag be burning your paint. Do like the door lites.

[@tsimmons1974ts]

The flag holder supposed to go on the inside of the bumper on the flat piece in front of the wheel.

[@RichardGood6761]

Thank you. Finally someone else that has more experience than half the truck simulators on here 🤣🤣

[@tonypatrick9362]

Yeah he did cut car off Amber was a awesome helper today

[@subaru721]

Educational and god dam funny

[@kevinallen6802]

I hope he does another big rig give away!!

[@TheCumminspower59]

You should hang some mudflaps on the bottom of your headache rack above your fuel tanks to protect the back of your bunk from rocks and shit would look good too if you hung some facing forward off the tapers of your bumper

[@Swampfox1978]

I've been a fan for a bit, but the last thing you need is to be behind the wheel of a truck. You're constantly cutting peoole off, pulling out in front of them, hugging and crossing the center line. You couldn't drive a thirsty mule to water. 😂

[@BrandonLeech]

Chevy half-ton...there's gotta be one in his garage or driveway somewhere with a bunch of body damage on it. 🤣

[@damarkushammond8775]

Been waiting on this video since i seen the thumbnail 🙊🤫🤫 i thought this was going to be that video

[@zacharyarlien8997]

Bruce I want to see more semi working videos

[@MrBossmannjb78]

Bruce that truck needs chino stacks!

[@bamortimer]

Ordering good skins right now. That squeak drives me nuts

[@pappybigbearUtqiagkia5840]

Why didn't you get the blue mud flap for rear and hood.

[@warrinmason4202]

Just seen my buddy Bruce going up 75 north passing canton with that black thang on the back

[@joelilwall108]

When are you going to put taller stacks on Brutus?

[@huggy1712]

Awesome truck Blu-Tus looking like it’s ready to haul hotdogs LOL kidding Bruce take care stay safe G.Whyte

[@dangomanez659]

Mmm... Amber 🥰 Truck looks good too 👍

[@jesseh5554]

The end of the video was really refreshing. Not as wild and crazy. It was real down to earth. Very nice.

[@jonseibert6763]

Get a magnetic over size load sign for the front bumper if its magnetic.

[@movingearth3726]

Yeah right and that thing comes off above 80

[@Fatboy103.]

Open the noor open the noor 😂😂😂

[@dagburn8692]

The off colored blue headache rack would drive me nuts

[@dylanmartin5748]

Hey Bruce are u going to put on a bumper like ur other truck

[@bigcountry9763]

AMER YOUR THE BEST

[@JamesPretty]

I dig that truck..

[@lesend5026]

i meant she is the STAR of the show!!!

[@KevinSmith-lq4ch]

Gunner was telling you how to mount them flags the right way I was picking up what he was puttin down

[@dragon561]

u were saying u put the flags in the wrong area and it hits the hood well were u drilled the holes find some tiny lights to cover the holes that might work

[@Avaiton_for_youtube]

Bruce when is the logging vid out

[@691plow]

I have a rectangular shaped bumper ( also has draw pin in center)that has ends caped off we installed those same flags at the bottom on the cap it’s probably about 18” your truck sits pretty high you shouldn’t have any problems with clearance

[@Bruce_Wilson]

Yeah I’m going to do a 12ga customs bumper I think 18”

[@warrenmichael918]

@@Bruce_Wilson Them plastic/mesh flags will rub the paint as they flap in the wind. Mine rub like heck and leaves the paint dull and scuffed.

[@mikeklein318]

Im not a over the road driver , but pulled alot of trailers and the the wide load in the back can be coded violation.

[@tommechler7583]

What was the name of the lights did you just put in your door I’d like to get a Saturday off for my truck

[@robertsmith7580]

Hell I stand around and make those faces now !

[@taylorhale6459]

Hey at least the rig got to work also so happy yall got the truck back

[@rodneycarroll2984]

This truck gonna be better than the taxi.

[@patreed7966]

If you will read the permit concerning oversize signs and flags it will tell you it cannot be vertical it cannot be horizontal but a 45 degree angle is best and I cannot believe you mounted that on the face of the bumper when there is a plate on the back side

[@SemiErnie]

She'll get over it , you did .

[@BrandonLeech]

Him: Balances an expensive semi-truck hood on the tip of shovel. Also him: Let's let a toddler run around under here!

[@realkilju]

It aint gonna drop

[@jeremiahsullivan5219]

The color of the headache rack does not match the rest of the truck

[@greentruth89]

Pulling out in front of cars damn near hit two cows 😂😂 this guy is reckless...

[@austinmoffatt7878]

Yeah but he isn’t at fault, that car sped up he said lol. Nope it did not, he clearly pulled out in front of a car that had the right of way is it was already in the lane of travel. NOT Bruce because he’s in a big rig

[@randyzapton6424]

Still needs a bull bar and full rear fenders

[@Patrick-jt4dk]

I’m happy for you and your trucks are very nice. I definitely didn’t know that KZbin paid so much to have two new trucks chromed out new trailers new house wife not working small kid I’m definitely in the wrong TWO businesses. I hope to see you get a dozen more stay safe keep up the great work and Best of wishes to y’all.

[@fordtough91]

Hey Bruce am I seeing this right or you gonna be at Waupun truck show in Waupun WI in a few wks with the pull truck 😁😁

[@gettin_it_done]

Are those mudflaps on the headache rack 2 different sizes or is it just my eyes? Looks like passenger one is about an inch shorter than driver side.

[@pb9040]

1406 good saddle ride, truckins best 😂 aussie hauler 😎

[@db7059]

Bruce cut car off leaving his shop

[@Bruce_Wilson]

No I didn’t, they just decided to speed up and show off. People do it everyday at my shop

[@loganb5657]

@@Bruce_Wilson that db guy is probably one of those people that are in comments that knows everything 😂

[@YourLocalCountryBoy23]

Let me tell ya sum if theres a truck turning and he seen the truck starting to turn in they floored the gas on the shoulder so if a lawyer says sum car would be at fault tbh

[@Automotivate_]

The car literally just turned at the same time as Bruce

[@williammarrara7490]

Bruce, we all know that it's so unfair to pick on your wifey , because you've been lying - tricking her about how Short 6 inches are for ever.. Notice I used the word short which would be your 6 inch measuring device. Inch worm.

[@CRW82]

Camera man know his angles 😂

[@natetheaxebattles2898]

Still hate the color, but adding all the chrome, ditchin the blue tanks etc has balanced the look out. Just a heads up. You probably know any hole you drill into that isn't aluminum will rust right quick. They make a clear seal you spray on fresh "holes" to stop er from rustin. Or u can use clear coat depending on where the hole is so that it doesn impact the look from over spray etc... Just be a bummer to see rustle dribbling down from all them holes you done stabbed in that Pete.

[@toddanderson7313]

If I was driving a truck like that i would have a nervous breakdown keeping it clean. To much bling bling on that ride for me. Still driving for over 30 years and polishing wheels and keeping chrome clean is a waste of time for me. Blue beacon once a week is good enough for me. Enjoy watching Bruce on U tube. STAY SAFE !!!

[@mjboy8790]

What ever happened with trailer break issue ruining tires

[@ajgill206rr]

get the bed liner sprayed on... Where are you hanging chains.

[@jacksatterfield6031]

Them oversize flag holders mount to the side of the bumper where that little lip is and it will clear your hood and everything when you open it

[@RichardGood6761]

Nah let's just waste a brand new bumper by drilling holes into it 🤣. O well not my truck but it is a nice rig. Right color n all to match the fleet on the farm 👌

[@brettandersen7547]

Those are on his other truck the tractor taxi but I think he gave up on it now he has this new truck

[@ryanbraun3500]

You could put bumper guides on the bumper and zip tie red flags to them

[@Thatredneck230]

All the guys know what they were looking at when amber was changing the back mudflap

[@bobjohnson8868]

Move them down and get some Chrome nuts and bolts to put in the holes

[@E.C.2]

Pretty Tractors don't do logging. Next time take a good Truck with sleeper which is standard looking.

[@brendinmoore7606]

gotta get some straight pipes

[@rodneycarroll2984]

so nice

[@RichardGood6761]

Can't believe ya drilled holes in a brand new bumper and headache rack smh 😂. Must have plenty of that blue colllllllarrrr $$$ 😂😂😂. Side note.. why wouldn't ya just go with magnetic O/S load signs unless bumper is SS chrome , but still

[@warrenmichael918]

Its a work truck, holes will need drilled in places. That bumper will not be on much longer i bet. We all know its gonna get a big ol drop bumper.

[@WVT0587]

He’s got more money than sense

[@RichardGood6761]

Work truck or not, it's brand new 🤣

[@RichardGood6761]

@TPro-87 so far seems like it. Woulda at least put the oversize flags on the back side of the bumper

[@warrenmichael918]

@@RichardGood6761 It is new but when you buy it for a work truck, things have to be bolted on and mounted to it. The flag brackets wont work on the back side of the bumper, they are supposed to be mounted on the front. They just should have been mounted differently so they didnt hit the hood, as well as mounted so the flags wont get blown up against the painted front fender edge. I was kinda surprised he drilled through that new headache rack like he did! Those mud flaps he put up there coulda been mounted just a bit higher onto that bracket/box just above where he drilled. Either way, its just a work truck.

[@user-rd5wj8lc3x]

She mad cause you got a small Peter 😂😂

[@ridinwithwheelz188]

I need to meet Captain obvious, but the brand new custom headache rack does not match the same color blue is a Brutus. And let Amber know I’ve got $1000 burning a hole in my pocket!!!🤣🤣🤣👍🏻 Bruce you know I love you baby!!! 💯👍🏻